diff --git a/parser/COPYING.GPL b/parser/COPYING.GPL index 3753c8080..6e438ed6f 100644 --- a/parser/COPYING.GPL +++ b/parser/COPYING.GPL @@ -1,6 +1,5 @@ This license applies to all source files within the SubDomain parser -package, with the exception of md5.c and the files in the pcre/ -subdirectory, as they are covered under their own respective licenses. +package. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 diff --git a/parser/Makefile b/parser/Makefile index 815ae515a..c7c218826 100644 --- a/parser/Makefile +++ b/parser/Makefile @@ -82,9 +82,6 @@ OBJECTS = parser_lex.o parser_yacc.o parser_main.o parser_interface.o \ AAREDIR= libapparmor_re AAREOBJECTS = ${AAREDIR}/libapparmor_re.a -PCREDIR= pcre -PCREOBJECTS = ${PCREDIR}/pcre.o - LEX_C_FILES = parser_lex.c YACC_C_FILES = parser_yacc.c parser_yacc.h @@ -94,7 +91,7 @@ DISABLED_TESTS = TEST_OBJECTS = $(filter-out parser_lex.o, \ $(filter-out parser_yacc.o, \ - $(filter-out parser_main.o, ${OBJECTS} ${PCREOBJECTS}))) + $(filter-out parser_main.o, ${OBJECTS}))) ifdef V VERBOSE = 1 @@ -140,10 +137,10 @@ docs: manpages htmlmanpages pdf all: main docs tests -apparmor_parser: $(OBJECTS) $(PCREOBJECTS) $(AAREOBJECTS) +apparmor_parser: $(OBJECTS) $(AAREOBJECTS) rm -f ./libstdc++.a ln -s `g++ -print-file-name=libstdc++.a` - g++ $(EXTRA_CFLAGS) -o $@ $(OBJECTS) $(PCREOBJECTS) $(LIBS) \ + g++ $(EXTRA_CFLAGS) -o $@ $(OBJECTS) $(LIBS) \ ${LEXLIB} $(AAREOBJECTS) -static-libgcc -L. parser_yacc.c parser_yacc.h: parser_yacc.y parser.h @@ -216,8 +213,8 @@ tst_variable: parser_variable.c parser.h $(filter-out parser_variable.o, ${TEST_ tst_misc: parser_misc.c parser.h parser_yacc.h af_names.h cap_names.h $(Q)$(CC) -DUNIT_TEST $(EXTRA_CFLAGS) $(TEST_FLAGS) -o $@ $< $(BUILD_OUTPUT) -tst_regex: parser_regex.c parser.h parser_yacc.h $(PCREOBJECTS) - $(Q)$(CC) -DUNIT_TEST $(EXTRA_CFLAGS) $(TEST_FLAGS) -o $@ $< $(PCREOBJECTS) $(BUILD_OUTPUT) +tst_regex: parser_regex.c parser.h parser_yacc.h + $(Q)$(CC) -DUNIT_TEST $(EXTRA_CFLAGS) $(TEST_FLAGS) -o $@ $< $(BUILD_OUTPUT) .SILENT: check .PHONY: check @@ -237,11 +234,6 @@ check: tests $(AAREOBJECTS): make -C $(AAREDIR) -.SILENT: $(PCREOBJECTS) -.PHONY: $(PCREOBJECTS) -$(PCREOBJECTS): - make -C $(PCREDIR) "CFLAGS=$(EXTRA_CFLAGS)" - .PHONY: install-rhel4 install-rhel4: install-redhat @@ -304,7 +296,6 @@ clean: _clean rm -f af_names.h rm -f cap_names.h -rm -rf techdoc.{aux,log,pdf,toc,txt} techdoc/ - make -s -C $(PCREDIR) clean make -s -C $(AAREDIR) clean make -s -C po clean diff --git a/parser/README b/parser/README index a6707dc75..d3495c0e0 100644 --- a/parser/README +++ b/parser/README @@ -11,11 +11,6 @@ issues should be directed to security@suse.de or secure@novell.com, where we will attempt to conform to the RFP vulnerability disclosure protocol: http://www.wiretrip.net/rfp/policy.html -The parser uses the PCRE (Perl Compatible Regular Expression) engine, -which was written by Philip Hazel and is copyright by the University -of Cambridge, England. For more information on the PCRE engine, see - - Thanks. -- The AppArmor development team diff --git a/parser/parser.h b/parser/parser.h index 4e8847213..c5a860e40 100644 --- a/parser/parser.h +++ b/parser/parser.h @@ -23,7 +23,6 @@ #include #include -#include "pcre/internal.h" #include "immunix.h" #include "libapparmor_re/apparmor_re.h" @@ -44,7 +43,6 @@ struct named_transition { struct cod_pattern { char *regex; // posix regex - pcre *compiled; // compiled regex, size is compiled->size }; struct cod_entry { @@ -175,9 +173,10 @@ struct var_string { #define OPTION_OFILE 5 #define AARE_NONE 0 -#define AARE_PCRE 1 #define AARE_DFA 2 +#define BOOL int + #define FLAG_CHANGEHAT_1_4 2 #define FLAG_CHANGEHAT_1_5 3 extern int flag_changehat_version; diff --git a/parser/parser_interface.c b/parser/parser_interface.c index 3bef0b6fe..8c4cbc187 100644 --- a/parser/parser_interface.c +++ b/parser/parser_interface.c @@ -455,57 +455,6 @@ inline int sd_write_listend(sd_serialize *p) return 1; } -int sd_serialize_pattern(sd_serialize *p, pcre *pat) -{ - if (!sd_write_struct(p, "pcre")) - return 0; - if (!sd_write32(p, pat->size - sizeof(pcre))) - return 0; - if (!sd_write32(p, pat->magic_number)) - return 0; - if (!sd_write32(p, pat->options)) - return 0; - if (!sd_write16(p, pat->top_bracket)) - return 0; - if (!sd_write16(p, pat->top_backref)) - return 0; - if (!sd_write8(p, pat->first_char)) - return 0; - if (!sd_write8(p, pat->req_char)) - return 0; - if (!sd_write8(p, pat->code[0])) - return 0; - if (!sd_write_blob(p, &pat->code[1], pat->size - sizeof(pcre), NULL)) - return 0; - if (!sd_write_structend(p)) - return 0; - - return 1; -} - -int sd_serialize_file_entry(sd_serialize *p, struct cod_entry *file_entry) -{ - PDEBUG("Writing file entry. name '%s'\n", file_entry->name); - if (!sd_write_struct(p, "fe")) - return 0; - if (!sd_write_string(p, file_entry->name, NULL)) - return 0; - if (!sd_write32(p, file_entry->mode)) - return 0; - if (!sd_write32(p, file_entry->pattern_type)) - return 0; - if (file_entry->pattern_type == ePatternRegex) { - if (!sd_write_string(p, file_entry->pat.regex, NULL)) - return 0; - if (!sd_serialize_pattern(p, file_entry->pat.compiled)) - return 0; - } - if (!sd_write_structend(p)) - return 0; - - return 1; -} - int sd_serialize_dfa(sd_serialize *p, void *dfa, size_t size) { if (dfa && !sd_write_aligned_blob(p, dfa, size, "aadfa")) @@ -598,18 +547,6 @@ int count_tailglob_ents(struct cod_entry *list) return count; } -int count_pcre_ents(struct cod_entry *list) -{ - struct cod_entry *entry; - int count = 0; - list_for_each(list, entry) { - if (entry->pattern_type == ePatternRegex) { - count++; - } - } - return count; -} - int sd_serialize_profile(sd_serialize *p, struct codomain *profile, int flattened) { @@ -728,47 +665,8 @@ int sd_serialize_profile(sd_serialize *p, struct codomain *profile, if (!sd_serialize_xtable(p, profile->exec_table)) return 0; } else { - /* pcre globbing entries */ - if (count_pcre_ents(profile->entries)) { - if (!sd_write_list(p, "pgent")) - return 0; - list_for_each(profile->entries, entry) { - if (entry->pattern_type == ePatternRegex) { - if (!sd_serialize_file_entry(p, entry)) - return 0; - } - } - if (!sd_write_listend(p)) - return 0; - } - - /* simple globbing entries */ - if (count_tailglob_ents(profile->entries)) { - if (!sd_write_list(p, "sgent")) - return 0; - list_for_each(profile->entries, entry) { - if (entry->pattern_type == ePatternTailGlob) { - if (!sd_serialize_file_entry(p, entry)) - return 0; - } - } - if (!sd_write_listend(p)) - return 0; - } - - /* basic file entries */ - if (count_file_ents(profile->entries)) { - if (!sd_write_list(p, "fent")) - return 0; - list_for_each(profile->entries, entry) { - if (entry->pattern_type == ePatternBasic) { - if (!sd_serialize_file_entry(p, entry)) - return 0; - } - } - if (!sd_write_listend(p)) - return 0; - } + PERROR(_("Unknown pattern type\n")); + return 1; } if (profile->hat_table && regex_type != AARE_DFA) { diff --git a/parser/parser_main.c b/parser/parser_main.c index dd61052c0..5f75e46ee 100644 --- a/parser/parser_main.c +++ b/parser/parser_main.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #define _(s) gettext(s) @@ -53,7 +54,6 @@ #define MATCH_STRING "/sys/kernel/security/" MODULE_NAME "/matching" #define FLAGS_FILE "/sys/kernel/security/" MODULE_NAME "/features" #define MOUNTED_FS "/proc/mounts" -#define PCRE "pattern=pcre" #define AADFA "pattern=aadfa" #define PRIVILEGED_OPS (write_cache || kernel_load) @@ -607,9 +607,6 @@ static void get_match_string(void) { out: if (match_string) { - if (strstr(match_string, PCRE)) - regex_type = AARE_PCRE; - if (strstr(match_string, AADFA)) regex_type = AARE_DFA; @@ -658,20 +655,6 @@ fail: return; } -/* return 1 --> PCRE should work fine - return 0 --> no PCRE support */ -static int regex_support(void) { - /* no match string, predates (or postdates?) the split matching - module design */ - if (!match_string) - return 1; - - if (regex_type != AARE_NONE) - return 1; - - return 0; -} - int process_binary(int option, char *profilename) { char *buffer = NULL; @@ -876,10 +859,6 @@ int process_profile(int option, char *profilename) goto out; } - if (!regex_support()) { - die_if_any_regex(); - } - retval = load_policy(option); out: diff --git a/parser/parser_misc.c b/parser/parser_misc.c index 3efbcd7bb..e544128e2 100644 --- a/parser/parser_misc.c +++ b/parser/parser_misc.c @@ -19,6 +19,7 @@ /* assistance routines */ +#include #include #include #include @@ -27,6 +28,7 @@ #define _(s) gettext(s) #include #include +#include #include #include @@ -632,7 +634,6 @@ struct cod_entry *new_entry(char *namespace, char *id, int mode, char *link_id) entry->pattern_type = ePatternInvalid; entry->pat.regex = NULL; - entry->pat.compiled = NULL; entry->next = NULL; @@ -658,7 +659,6 @@ struct cod_entry *copy_cod_entry(struct cod_entry *orig) /* XXX - need to create copies of the patterns, too */ entry->pattern_type = orig->pattern_type; entry->pat.regex = NULL; - entry->pat.compiled = NULL; entry->next = orig->next; @@ -679,8 +679,6 @@ void free_cod_entries(struct cod_entry *list) free(list->link_name); if (list->pat.regex) free(list->pat.regex); - if (list->pat.compiled) - free(list->pat.compiled); free(list); } diff --git a/parser/parser_regex.c b/parser/parser_regex.c index d190bac15..d09882c4e 100644 --- a/parser/parser_regex.c +++ b/parser/parser_regex.c @@ -21,6 +21,7 @@ #include #include #include +#include #define _(s) gettext(s) /* #define DEBUG */ @@ -74,7 +75,6 @@ static void filter_slashes(char *path) { char *sptr, *dptr; BOOL seen_slash = 0; - int len; if (!path || (strlen(path) < 2)) return; @@ -106,19 +106,6 @@ static void filter_slashes(char *path) } } *dptr = 0; - - if (regex_type != AARE_DFA) { - /* eliminate trailing slashes for versions of apparmor that - * do not use the dfa engine. - * Versions of apparmor which use the dfa engine use the - * trailing / to differentiate between file and directory - * matches - */ - len = strlen(path); - if (len > 2 && path[len -1] == '/') { - path[len - 1] = 0; - } - } } static pattern_t convert_aaregex_to_pcre(const char *aare, int anchor, @@ -416,82 +403,6 @@ out: return ptype; } -static int process_pcre_entry(struct cod_entry *entry) -{ - char tbuf[PATH_MAX + 3]; /* +3 for ^, $ and \0 */ - int ret = TRUE; - pattern_t ptype; - int pos; - if (!entry) /* shouldn't happen */ - return TRUE; - - ptype = convert_aaregex_to_pcre(entry->name, 1, tbuf, PATH_MAX+3, &pos); - if (ptype == ePatternInvalid) - return FALSE; - - entry->pattern_type = ptype; - - /* - * Only use buffer (tbuf) that we built above, if we - * identified a pattern requiring full regex support. - */ - if (ptype == ePatternRegex) { - int pattlen = strlen(tbuf); - - if ((entry->pat.regex = malloc(pattlen + 1))) { - const char *errorreason; - int errpos; - - strcpy(entry->pat.regex, tbuf); - - if ((entry->pat.compiled = - pcre_compile(entry->pat.regex, 0, - &errorreason, &errpos, - NULL))) { - /* NULL out tables, kernel will use a - * private version - */ - entry->pat.compiled->tables = NULL; - } else { - int i; - - PERROR(_("%s: Failed to compile regex '%s' [original: '%s']\n"), - progname, entry->pat.regex, - entry->name); - - PERROR(_("%s: error near "), - progname); - - for (i = 0; i < errpos; i++) { - fputc('.', stderr); - } - - fputc('^', stderr); - fputc('\n', stderr); - - PERROR(_("%s: error reason: '%s'\n"), - progname, errorreason); - - free(entry->pat.regex); - entry->pat.regex = NULL; - - ret = FALSE; - } - } else { - PERROR(_("%s: Failed to compile regex '%s' [original: '%s'] - malloc failed\n"), - progname, entry->pat.regex, entry->name); - - ret = FALSE; - } - } else { - /* not a regex, scan input for any escape characters - * and remove, and reduce double \\ to a single */ - filter_escapes(entry->name); - } /* ptype == ePatternRegex */ - - return ret; -} - static const char *local_name(const char *name) { const char *t; @@ -650,18 +561,13 @@ static int process_dfa_entry(aare_ruleset_t *dfarules, struct cod_entry *entry) int post_process_entries(struct codomain *cod) { - int ret = TRUE, rc; + int ret = TRUE; struct cod_entry *entry; int count = 0; list_for_each(cod->entries, entry) { - if (regex_type == AARE_DFA) { - rc = process_dfa_entry(cod->dfarules, entry); - } else { - filter_slashes(entry->name); - rc = process_pcre_entry(entry); - } - if (!rc) + if (regex_type == AARE_DFA && + !process_dfa_entry(cod->dfarules, entry)) ret = FALSE; count++; } @@ -777,7 +683,7 @@ static int test_filter_slashes(void) test_string = strdup("///foo//////f//oo////////////////"); filter_slashes(test_string); - MY_TEST(strcmp(test_string, "/foo/f/oo") == 0, "simple tests"); + MY_TEST(strcmp(test_string, "/foo/f/oo/") == 0, "simple tests"); test_string = strdup("/foo/f/oo"); filter_slashes(test_string); @@ -809,13 +715,11 @@ static int test_filter_slashes(void) test_string = strdup("/a/"); filter_slashes(test_string); - MY_TEST(strcmp(test_string, "/a") == 0, "simple test for /a/"); + MY_TEST(strcmp(test_string, "/a/") == 0, "simple test for /a/"); return rc; } -int regex_type = AARE_PCRE; - int main(void) { int rc = 0; diff --git a/parser/parser_symtab.c b/parser/parser_symtab.c index d483b97a8..5989014d2 100644 --- a/parser/parser_symtab.c +++ b/parser/parser_symtab.c @@ -23,6 +23,7 @@ #include #include #include +#include #define _(s) gettext(s) #include "immunix.h" diff --git a/parser/parser_variable.c b/parser/parser_variable.c index 0e812fd84..734ecd030 100644 --- a/parser/parser_variable.c +++ b/parser/parser_variable.c @@ -17,10 +17,14 @@ * along with this program; if not, contact Novell, Inc. */ +#include +#include #include #include #include #include +#include + #define _(s) gettext(s) /* #define DEBUG */ diff --git a/parser/pcre/Makefile b/parser/pcre/Makefile deleted file mode 100644 index 1a4a972f7..000000000 --- a/parser/pcre/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -all: pcre.o - -pcre.o: pcre.c - $(CC) -c $(CFLAGS) $< - -clean: - rm -f pcre.o diff --git a/parser/pcre/chartables.c b/parser/pcre/chartables.c deleted file mode 100644 index 9055da2d2..000000000 --- a/parser/pcre/chartables.c +++ /dev/null @@ -1,183 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* This file is automatically written by the dftables auxiliary -program. If you edit it by hand, you might like to edit the Makefile to -prevent its ever being regenerated. - -This file is #included in the compilation of pcre.c to build the default -character tables which are used when no tables are passed to the compile -function. */ - -static unsigned char pcre_default_tables[] = { - -/* This table is a lower casing table. */ - - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122, 91, 92, 93, 94, 95, - 96, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122,123,124,125,126,127, - 128,129,130,131,132,133,134,135, - 136,137,138,139,140,141,142,143, - 144,145,146,147,148,149,150,151, - 152,153,154,155,156,157,158,159, - 160,161,162,163,164,165,166,167, - 168,169,170,171,172,173,174,175, - 176,177,178,179,180,181,182,183, - 184,185,186,187,188,189,190,191, - 192,193,194,195,196,197,198,199, - 200,201,202,203,204,205,206,207, - 208,209,210,211,212,213,214,215, - 216,217,218,219,220,221,222,223, - 224,225,226,227,228,229,230,231, - 232,233,234,235,236,237,238,239, - 240,241,242,243,244,245,246,247, - 248,249,250,251,252,253,254,255, - -/* This table is a case flipping table. */ - - 0, 1, 2, 3, 4, 5, 6, 7, - 8, 9, 10, 11, 12, 13, 14, 15, - 16, 17, 18, 19, 20, 21, 22, 23, - 24, 25, 26, 27, 28, 29, 30, 31, - 32, 33, 34, 35, 36, 37, 38, 39, - 40, 41, 42, 43, 44, 45, 46, 47, - 48, 49, 50, 51, 52, 53, 54, 55, - 56, 57, 58, 59, 60, 61, 62, 63, - 64, 97, 98, 99,100,101,102,103, - 104,105,106,107,108,109,110,111, - 112,113,114,115,116,117,118,119, - 120,121,122, 91, 92, 93, 94, 95, - 96, 65, 66, 67, 68, 69, 70, 71, - 72, 73, 74, 75, 76, 77, 78, 79, - 80, 81, 82, 83, 84, 85, 86, 87, - 88, 89, 90,123,124,125,126,127, - 128,129,130,131,132,133,134,135, - 136,137,138,139,140,141,142,143, - 144,145,146,147,148,149,150,151, - 152,153,154,155,156,157,158,159, - 160,161,162,163,164,165,166,167, - 168,169,170,171,172,173,174,175, - 176,177,178,179,180,181,182,183, - 184,185,186,187,188,189,190,191, - 192,193,194,195,196,197,198,199, - 200,201,202,203,204,205,206,207, - 208,209,210,211,212,213,214,215, - 216,217,218,219,220,221,222,223, - 224,225,226,227,228,229,230,231, - 232,233,234,235,236,237,238,239, - 240,241,242,243,244,245,246,247, - 248,249,250,251,252,253,254,255, - -/* This table contains bit maps for various character classes. -Each map is 32 bytes long and the bits run from the least -significant end of each byte. The classes that have their own -maps are: space, xdigit, digit, upper, lower, word, graph -print, punct, and cntrl. Other classes are built from combinations. */ - - 0x00,0x3e,0x00,0x00,0x01,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0x7e,0x00,0x00,0x00,0x7e,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0xfe,0xff,0xff,0x07,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0x07, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0x00,0x00,0xff,0x03, - 0xfe,0xff,0xff,0x87,0xfe,0xff,0xff,0x07, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xfe,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xff,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0x00,0x00,0x00,0x00,0xfe,0xff,0x00,0xfc, - 0x01,0x00,0x00,0xf8,0x01,0x00,0x00,0x78, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - - 0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, - -/* This table identifies various classes of character by individual bits: - 0x01 white space character - 0x02 letter - 0x04 decimal digit - 0x08 hexadecimal digit - 0x10 alphanumeric or '_' - 0x80 regular expression metacharacter or binary zero -*/ - - 0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 */ - 0x00,0x01,0x01,0x01,0x01,0x01,0x00,0x00, /* 8- 15 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ - 0x01,0x00,0x00,0x00,0x80,0x00,0x00,0x00, /* - ' */ - 0x80,0x80,0x80,0x80,0x00,0x00,0x80,0x00, /* ( - / */ - 0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /* 0 - 7 */ - 0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x80, /* 8 - ? */ - 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* @ - G */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* H - O */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* P - W */ - 0x12,0x12,0x12,0x80,0x00,0x00,0x80,0x10, /* X - _ */ - 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* ` - g */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* h - o */ - 0x12,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* p - w */ - 0x12,0x12,0x12,0x80,0x80,0x00,0x00,0x00, /* x -127 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */ - -/* End of chartables.c */ diff --git a/parser/pcre/config.h b/parser/pcre/config.h deleted file mode 100644 index f79a7b598..000000000 --- a/parser/pcre/config.h +++ /dev/null @@ -1,48 +0,0 @@ -/* config.h. Generated automatically by configure. */ - -/* On Unix systems config.in is converted by configure into config.h. PCRE is -written in Standard C, but there are a few non-standard things it can cope -with, allowing it to run on SunOS4 and other "close to standard" systems. - -On a non-Unix system you should just copy this file into config.h, and set up -the macros the way you need them. You should normally change the definitions of -HAVE_STRERROR and HAVE_MEMMOVE to 1. Unfortunately, because of the way autoconf -works, these cannot be made the defaults. If your system has bcopy() and not -memmove(), change the definition of HAVE_BCOPY instead of HAVE_MEMMOVE. If your -system has neither bcopy() nor memmove(), leave them both as 0; an emulation -function will be used. */ - -/* Define to empty if the keyword does not work. */ - -/* #undef const */ - -/* Define to `unsigned' if doesn't define size_t. */ - -/* #undef size_t */ - -/* The following two definitions are mainly for the benefit of SunOS4, which -doesn't have the strerror() or memmove() functions that should be present in -all Standard C libraries. The macros HAVE_STRERROR and HAVE_MEMMOVE should -normally be defined with the value 1 for other systems, but unfortunately we -can't make this the default because "configure" files generated by autoconf -will only change 0 to 1; they won't change 1 to 0 if the functions are not -found. */ - -#define HAVE_STRERROR 1 -#define HAVE_MEMMOVE 1 - -/* There are some non-Unix systems that don't even have bcopy(). If this macro -is false, an emulation is used. If HAVE_MEMMOVE is set to 1, the value of -HAVE_BCOPY is not relevant. */ - -#define HAVE_BCOPY 1 - -/* The value of NEWLINE determines the newline character. The default is to -leave it up to the compiler, but some sites want to force a particular value. -On Unix systems, "configure" can be used to override this default. */ - -#ifndef NEWLINE -#define NEWLINE '\n' -#endif - -/* End */ diff --git a/parser/pcre/internal.h b/parser/pcre/internal.h deleted file mode 100644 index 0c8c1c9df..000000000 --- a/parser/pcre/internal.h +++ /dev/null @@ -1,412 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - - -/* This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -Written by: Philip Hazel - - Copyright (c) 1997-2001 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - -/* This header contains definitions that are shared between the different -modules, but which are not relevant to the outside. */ - -/* Get the definitions provided by running "configure" */ - -#include "config.h" - -/* To cope with SunOS4 and other systems that lack memmove() but have bcopy(), -define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY -is set. Otherwise, include an emulating function for those systems that have -neither (there some non-Unix environments where this is the case). This assumes -that all calls to memmove are moving strings upwards in store, which is the -case in PCRE. */ - -#if ! HAVE_MEMMOVE -#undef memmove /* some systems may have a macro */ -#if HAVE_BCOPY -#define memmove(a, b, c) bcopy(b, a, c) -#else -void * -pcre_memmove(unsigned char *dest, const unsigned char *src, size_t n) -{ -int i; -dest += n; -src += n; -for (i = 0; i < n; ++i) *(--dest) = *(--src); -} -#define memmove(a, b, c) pcre_memmove(a, b, c) -#endif -#endif - -/* Standard C headers plus the external interface definition */ - -#include -#include -#include -#include -#include -#include -#include "pcre.h" - -/* In case there is no definition of offsetof() provided - though any proper -Standard C system should have one. */ - -#ifndef offsetof -#define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field)) -#endif - -/* These are the public options that can change during matching. */ - -#define PCRE_IMS (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL) - -/* Private options flags start at the most significant end of the four bytes, -but skip the top bit so we can use ints for convenience without getting tangled -with negative values. The public options defined in pcre.h start at the least -significant end. Make sure they don't overlap, though now that we have expanded -to four bytes there is plenty of space. */ - -#define PCRE_FIRSTSET 0x40000000 /* first_char is set */ -#define PCRE_REQCHSET 0x20000000 /* req_char is set */ -#define PCRE_STARTLINE 0x10000000 /* start after \n for multiline */ -#define PCRE_INGROUP 0x08000000 /* compiling inside a group */ -#define PCRE_ICHANGED 0x04000000 /* i option changes within regex */ - -/* Options for the "extra" block produced by pcre_study(). */ - -#define PCRE_STUDY_MAPPED 0x01 /* a map of starting chars exists */ - -/* Masks for identifying the public options which are permitted at compile -time, run time or study time, respectively. */ - -#define PUBLIC_OPTIONS \ - (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \ - PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8) - -#define PUBLIC_EXEC_OPTIONS \ - (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY) - -#define PUBLIC_STUDY_OPTIONS 0 /* None defined */ - -/* Magic number to provide a small check against being handed junk. */ - -#define MAGIC_NUMBER 0x50435245UL /* 'PCRE' */ - -/* Miscellaneous definitions */ - -typedef int BOOL; - -#define FALSE 0 -#define TRUE 1 - -/* Escape items that are just an encoding of a particular data value. Note that -ESC_N is defined as yet another macro, which is set in config.h to either \n -(the default) or \r (which some people want). */ - -#ifndef ESC_E -#define ESC_E 27 -#endif - -#ifndef ESC_F -#define ESC_F '\f' -#endif - -#ifndef ESC_N -#define ESC_N NEWLINE -#endif - -#ifndef ESC_R -#define ESC_R '\r' -#endif - -#ifndef ESC_T -#define ESC_T '\t' -#endif - -/* These are escaped items that aren't just an encoding of a particular data -value such as \n. They must have non-zero values, as check_escape() returns -their negation. Also, they must appear in the same order as in the opcode -definitions below, up to ESC_z. The final one must be ESC_REF as subsequent -values are used for \1, \2, \3, etc. There is a test in the code for an escape -greater than ESC_b and less than ESC_Z to detect the types that may be -repeated. If any new escapes are put in-between that don't consume a character, -that code will have to change. */ - -enum { ESC_A = 1, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, ESC_W, ESC_w, - ESC_Z, ESC_z, ESC_REF }; - -/* Opcode table: OP_BRA must be last, as all values >= it are used for brackets -that extract substrings. Starting from 1 (i.e. after OP_END), the values up to -OP_EOD must correspond in order to the list of escapes immediately above. */ - -enum { - OP_END, /* End of pattern */ - - /* Values corresponding to backslashed metacharacters */ - - OP_SOD, /* Start of data: \A */ - OP_NOT_WORD_BOUNDARY, /* \B */ - OP_WORD_BOUNDARY, /* \b */ - OP_NOT_DIGIT, /* \D */ - OP_DIGIT, /* \d */ - OP_NOT_WHITESPACE, /* \S */ - OP_WHITESPACE, /* \s */ - OP_NOT_WORDCHAR, /* \W */ - OP_WORDCHAR, /* \w */ - OP_EODN, /* End of data or \n at end of data: \Z. */ - OP_EOD, /* End of data: \z */ - - OP_OPT, /* Set runtime options */ - OP_CIRC, /* Start of line - varies with multiline switch */ - OP_DOLL, /* End of line - varies with multiline switch */ - OP_ANY, /* Match any character */ - OP_CHARS, /* Match string of characters */ - OP_NOT, /* Match anything but the following char */ - - OP_STAR, /* The maximizing and minimizing versions of */ - OP_MINSTAR, /* all these opcodes must come in pairs, with */ - OP_PLUS, /* the minimizing one second. */ - OP_MINPLUS, /* This first set applies to single characters */ - OP_QUERY, - OP_MINQUERY, - OP_UPTO, /* From 0 to n matches */ - OP_MINUPTO, - OP_EXACT, /* Exactly n matches */ - - OP_NOTSTAR, /* The maximizing and minimizing versions of */ - OP_NOTMINSTAR, /* all these opcodes must come in pairs, with */ - OP_NOTPLUS, /* the minimizing one second. */ - OP_NOTMINPLUS, /* This first set applies to "not" single characters */ - OP_NOTQUERY, - OP_NOTMINQUERY, - OP_NOTUPTO, /* From 0 to n matches */ - OP_NOTMINUPTO, - OP_NOTEXACT, /* Exactly n matches */ - - OP_TYPESTAR, /* The maximizing and minimizing versions of */ - OP_TYPEMINSTAR, /* all these opcodes must come in pairs, with */ - OP_TYPEPLUS, /* the minimizing one second. These codes must */ - OP_TYPEMINPLUS, /* be in exactly the same order as those above. */ - OP_TYPEQUERY, /* This set applies to character types such as \d */ - OP_TYPEMINQUERY, - OP_TYPEUPTO, /* From 0 to n matches */ - OP_TYPEMINUPTO, - OP_TYPEEXACT, /* Exactly n matches */ - - OP_CRSTAR, /* The maximizing and minimizing versions of */ - OP_CRMINSTAR, /* all these opcodes must come in pairs, with */ - OP_CRPLUS, /* the minimizing one second. These codes must */ - OP_CRMINPLUS, /* be in exactly the same order as those above. */ - OP_CRQUERY, /* These are for character classes and back refs */ - OP_CRMINQUERY, - OP_CRRANGE, /* These are different to the three seta above. */ - OP_CRMINRANGE, - - OP_CLASS, /* Match a character class */ - OP_REF, /* Match a back reference */ - OP_RECURSE, /* Match this pattern recursively */ - - OP_ALT, /* Start of alternation */ - OP_KET, /* End of group that doesn't have an unbounded repeat */ - OP_KETRMAX, /* These two must remain together and in this */ - OP_KETRMIN, /* order. They are for groups the repeat for ever. */ - - /* The assertions must come before ONCE and COND */ - - OP_ASSERT, /* Positive lookahead */ - OP_ASSERT_NOT, /* Negative lookahead */ - OP_ASSERTBACK, /* Positive lookbehind */ - OP_ASSERTBACK_NOT, /* Negative lookbehind */ - OP_REVERSE, /* Move pointer back - used in lookbehind assertions */ - - /* ONCE and COND must come after the assertions, with ONCE first, as there's - a test for >= ONCE for a subpattern that isn't an assertion. */ - - OP_ONCE, /* Once matched, don't back up into the subpattern */ - OP_COND, /* Conditional group */ - OP_CREF, /* Used to hold an extraction string number (cond ref) */ - - OP_BRAZERO, /* These two must remain together and in this */ - OP_BRAMINZERO, /* order. */ - - OP_BRANUMBER, /* Used for extracting brackets whose number is greater - than can fit into an opcode. */ - - OP_BRA /* This and greater values are used for brackets that - extract substrings up to a basic limit. After that, - use is made of OP_BRANUMBER. */ -}; - -/* The highest extraction number before we have to start using additional -bytes. (Originally PCRE didn't have support for extraction counts highter than -this number.) The value is limited by the number of opcodes left after OP_BRA, -i.e. 255 - OP_BRA. We actually set it a bit lower to leave room for additional -opcodes. */ - -#define EXTRACT_BASIC_MAX 150 - -/* The texts of compile-time error messages are defined as macros here so that -they can be accessed by the POSIX wrapper and converted into error codes. Yes, -I could have used error codes in the first place, but didn't feel like changing -just to accommodate the POSIX wrapper. */ - -#define ERR1 "\\ at end of pattern" -#define ERR2 "\\c at end of pattern" -#define ERR3 "unrecognized character follows \\" -#define ERR4 "numbers out of order in {} quantifier" -#define ERR5 "number too big in {} quantifier" -#define ERR6 "missing terminating ] for character class" -#define ERR7 "invalid escape sequence in character class" -#define ERR8 "range out of order in character class" -#define ERR9 "nothing to repeat" -#define ERR10 "operand of unlimited repeat could match the empty string" -#define ERR11 "internal error: unexpected repeat" -#define ERR12 "unrecognized character after (?" -#define ERR13 "unused error" -#define ERR14 "missing )" -#define ERR15 "back reference to non-existent subpattern" -#define ERR16 "erroffset passed as NULL" -#define ERR17 "unknown option bit(s) set" -#define ERR18 "missing ) after comment" -#define ERR19 "parentheses nested too deeply" -#define ERR20 "regular expression too large" -#define ERR21 "failed to get memory" -#define ERR22 "unmatched parentheses" -#define ERR23 "internal error: code overflow" -#define ERR24 "unrecognized character after (?<" -#define ERR25 "lookbehind assertion is not fixed length" -#define ERR26 "malformed number after (?(" -#define ERR27 "conditional group contains more than two branches" -#define ERR28 "assertion expected after (?(" -#define ERR29 "(?p must be followed by )" -#define ERR30 "unknown POSIX class name" -#define ERR31 "POSIX collating elements are not supported" -#define ERR32 "this version of PCRE is not compiled with PCRE_UTF8 support" -#define ERR33 "characters with values > 255 are not yet supported in classes" -#define ERR34 "character value in \\x{...} sequence is too large" -#define ERR35 "invalid condition (?(0)" - -/* All character handling must be done as unsigned characters. Otherwise there -are problems with top-bit-set characters and functions such as isspace(). -However, we leave the interface to the outside world as char *, because that -should make things easier for callers. We define a short type for unsigned char -to save lots of typing. I tried "uchar", but it causes problems on Digital -Unix, where it is defined in sys/types, so use "uschar" instead. */ - -typedef unsigned char uschar; - -/* The real format of the start of the pcre block; the actual code vector -runs on as long as necessary after the end. */ - -typedef struct real_pcre { - unsigned long int magic_number; - size_t size; - const unsigned char *tables; - unsigned long int options; - unsigned short int top_bracket; - unsigned short int top_backref; - uschar first_char; - uschar req_char; - uschar code[1]; -} real_pcre; - -/* The real format of the extra block returned by pcre_study(). */ - -typedef struct real_pcre_extra { - uschar options; - uschar start_bits[32]; -} real_pcre_extra; - - -/* Structure for passing "static" information around between the functions -doing the compiling, so that they are thread-safe. */ - -typedef struct compile_data { - const uschar *lcc; /* Points to lower casing table */ - const uschar *fcc; /* Points to case-flipping table */ - const uschar *cbits; /* Points to character type table */ - const uschar *ctypes; /* Points to table of type maps */ -} compile_data; - -/* Structure for passing "static" information around between the functions -doing the matching, so that they are thread-safe. */ - -typedef struct match_data { - int errorcode; /* As it says */ - int *offset_vector; /* Offset vector */ - int offset_end; /* One past the end */ - int offset_max; /* The maximum usable for return data */ - const uschar *lcc; /* Points to lower casing table */ - const uschar *ctypes; /* Points to table of type maps */ - BOOL offset_overflow; /* Set if too many extractions */ - BOOL notbol; /* NOTBOL flag */ - BOOL noteol; /* NOTEOL flag */ - BOOL utf8; /* UTF8 flag */ - BOOL endonly; /* Dollar not before final \n */ - BOOL notempty; /* Empty string match not wanted */ - const uschar *start_pattern; /* For use when recursing */ - const uschar *start_subject; /* Start of the subject string */ - const uschar *end_subject; /* End of the subject string */ - const uschar *start_match; /* Start of this match attempt */ - const uschar *end_match_ptr; /* Subject position at end match */ - int end_offset_top; /* Highwater mark at end of match */ -} match_data; - -/* Bit definitions for entries in the pcre_ctypes table. */ - -#define ctype_space 0x01 -#define ctype_letter 0x02 -#define ctype_digit 0x04 -#define ctype_xdigit 0x08 -#define ctype_word 0x10 /* alphameric or '_' */ -#define ctype_meta 0x80 /* regexp meta char or zero (end pattern) */ - -/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set -of bits for a class map. Some classes are built by combining these tables. */ - -#define cbit_space 0 /* [:space:] or \s */ -#define cbit_xdigit 32 /* [:xdigit:] */ -#define cbit_digit 64 /* [:digit:] or \d */ -#define cbit_upper 96 /* [:upper:] */ -#define cbit_lower 128 /* [:lower:] */ -#define cbit_word 160 /* [:word:] or \w */ -#define cbit_graph 192 /* [:graph:] */ -#define cbit_print 224 /* [:print:] */ -#define cbit_punct 256 /* [:punct:] */ -#define cbit_cntrl 288 /* [:cntrl:] */ -#define cbit_length 320 /* Length of the cbits table */ - -/* Offsets of the various tables from the base tables pointer, and -total length. */ - -#define lcc_offset 0 -#define fcc_offset 256 -#define cbits_offset 512 -#define ctypes_offset (cbits_offset + cbit_length) -#define tables_length (ctypes_offset + 256) - -/* End of internal.h */ diff --git a/parser/pcre/pcre.c b/parser/pcre/pcre.c deleted file mode 100644 index 875e5486b..000000000 --- a/parser/pcre/pcre.c +++ /dev/null @@ -1,5187 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* -This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -Written by: Philip Hazel - - Copyright (c) 1997-2001 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - - -/* Define DEBUG to get debugging output on stdout. */ - -/* #define DEBUG */ - -/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef -inline, and there are *still* stupid compilers about that don't like indented -pre-processor statements. I suppose it's only been 10 years... */ - -#ifdef DEBUG -#define DPRINTF(p) printf p -#else -#define DPRINTF(p) /*nothing*/ -#endif - -/* Include the internals header, which itself includes Standard C headers plus -the external pcre header. */ - -#include "internal.h" - - -/* Allow compilation as C++ source code, should anybody want to do that. */ - -#ifdef __cplusplus -#define class pcre_class -#endif - - -/* Maximum number of items on the nested bracket stacks at compile time. This -applies to the nesting of all kinds of parentheses. It does not limit -un-nested, non-capturing parentheses. This number can be made bigger if -necessary - it is used to dimension one int and one unsigned char vector at -compile time. */ - -#define BRASTACK_SIZE 200 - - -/* The number of bytes in a literal character string above which we can't add -any more is different when UTF-8 characters may be encountered. */ - -#ifdef SUPPORT_UTF8 -#define MAXLIT 250 -#else -#define MAXLIT 255 -#endif - - -/* Min and max values for the common repeats; for the maxima, 0 => infinity */ - -static const char rep_min[] = { 0, 0, 1, 1, 0, 0 }; -static const char rep_max[] = { 0, 0, 0, 0, 1, 1 }; - -/* Text forms of OP_ values and things, for debugging (not all used) */ - -#ifdef DEBUG -static const char *OP_names[] = { - "End", "\\A", "\\B", "\\b", "\\D", "\\d", - "\\S", "\\s", "\\W", "\\w", "\\Z", "\\z", - "Opt", "^", "$", "Any", "chars", "not", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", - "*", "*?", "+", "+?", "?", "??", "{", "{", - "class", "Ref", "Recurse", - "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not", - "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cref", - "Brazero", "Braminzero", "Branumber", "Bra" -}; -#endif - -/* Table for handling escaped characters in the range '0'-'z'. Positive returns -are simple data values; negative values are for special things like \d and so -on. Zero means further processing is needed (for things like \x), or the escape -is invalid. */ - -static const short int escapes[] = { - 0, 0, 0, 0, 0, 0, 0, 0, /* 0 - 7 */ - 0, 0, ':', ';', '<', '=', '>', '?', /* 8 - ? */ - '@', -ESC_A, -ESC_B, 0, -ESC_D, 0, 0, 0, /* @ - G */ - 0, 0, 0, 0, 0, 0, 0, 0, /* H - O */ - 0, 0, 0, -ESC_S, 0, 0, 0, -ESC_W, /* P - W */ - 0, 0, -ESC_Z, '[', '\\', ']', '^', '_', /* X - _ */ - '`', 7, -ESC_b, 0, -ESC_d, ESC_E, ESC_F, 0, /* ` - g */ - 0, 0, 0, 0, 0, 0, ESC_N, 0, /* h - o */ - 0, 0, ESC_R, -ESC_s, ESC_T, 0, 0, -ESC_w, /* p - w */ - 0, 0, -ESC_z /* x - z */ -}; - -/* Tables of names of POSIX character classes and their lengths. The list is -terminated by a zero length entry. The first three must be alpha, upper, lower, -as this is assumed for handling case independence. */ - -static const char *posix_names[] = { - "alpha", "lower", "upper", - "alnum", "ascii", "cntrl", "digit", "graph", - "print", "punct", "space", "word", "xdigit" }; - -static const uschar posix_name_lengths[] = { - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 }; - -/* Table of class bit maps for each POSIX class; up to three may be combined -to form the class. */ - -static const int posix_class_maps[] = { - cbit_lower, cbit_upper, -1, /* alpha */ - cbit_lower, -1, -1, /* lower */ - cbit_upper, -1, -1, /* upper */ - cbit_digit, cbit_lower, cbit_upper, /* alnum */ - cbit_print, cbit_cntrl, -1, /* ascii */ - cbit_cntrl, -1, -1, /* cntrl */ - cbit_digit, -1, -1, /* digit */ - cbit_graph, -1, -1, /* graph */ - cbit_print, -1, -1, /* print */ - cbit_punct, -1, -1, /* punct */ - cbit_space, -1, -1, /* space */ - cbit_word, -1, -1, /* word */ - cbit_xdigit,-1, -1 /* xdigit */ -}; - - -/* Definition to allow mutual recursion */ - -static BOOL - compile_regex(int, int, int *, uschar **, const uschar **, const char **, - BOOL, int, int *, int *, compile_data *); - -/* Structure for building a chain of data that actually lives on the -stack, for holding the values of the subject pointer at the start of each -subpattern, so as to detect when an empty string has been matched by a -subpattern - to break infinite loops. */ - -typedef struct eptrblock { - struct eptrblock *prev; - const uschar *saved_eptr; -} eptrblock; - -/* Flag bits for the match() function */ - -#define match_condassert 0x01 /* Called to check a condition assertion */ -#define match_isgroup 0x02 /* Set if start of bracketed group */ - - - -/************************************************* -* Global variables * -*************************************************/ - -/* PCRE is thread-clean and doesn't use any global variables in the normal -sense. However, it calls memory allocation and free functions via the two -indirections below, which are can be changed by the caller, but are shared -between all threads. */ - -void *(*pcre_malloc)(size_t) = malloc; -void (*pcre_free)(void *) = free; - - - -/************************************************* -* Macros and tables for character handling * -*************************************************/ - -/* When UTF-8 encoding is being used, a character is no longer just a single -byte. The macros for character handling generate simple sequences when used in -byte-mode, and more complicated ones for UTF-8 characters. */ - -#ifndef SUPPORT_UTF8 -#define GETCHARINC(c, eptr) c = *eptr++; -#define GETCHARLEN(c, eptr, len) c = *eptr; -#define BACKCHAR(eptr) - -#else /* SUPPORT_UTF8 */ - -/* Get the next UTF-8 character, advancing the pointer */ - -#define GETCHARINC(c, eptr) \ - c = *eptr++; \ - if (md->utf8 && (c & 0xc0) == 0xc0) \ - { \ - int a = utf8_table4[c & 0x3f]; /* Number of additional bytes */ \ - int s = 6*a; \ - c = (c & utf8_table3[a]) << s; \ - while (a-- > 0) \ - { \ - s -= 6; \ - c |= (*eptr++ & 0x3f) << s; \ - } \ - } - -/* Get the next UTF-8 character, not advancing the pointer, setting length */ - -#define GETCHARLEN(c, eptr, len) \ - c = *eptr; \ - len = 1; \ - if (md->utf8 && (c & 0xc0) == 0xc0) \ - { \ - int i; \ - int a = utf8_table4[c & 0x3f]; /* Number of additional bytes */ \ - int s = 6*a; \ - c = (c & utf8_table3[a]) << s; \ - for (i = 1; i <= a; i++) \ - { \ - s -= 6; \ - c |= (eptr[i] & 0x3f) << s; \ - } \ - len += a; \ - } - -/* If the pointer is not at the start of a character, move it back until -it is. */ - -#define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--; - -#endif - - - -/************************************************* -* Default character tables * -*************************************************/ - -/* A default set of character tables is included in the PCRE binary. Its source -is built by the maketables auxiliary program, which uses the default C ctypes -functions, and put in the file chartables.c. These tables are used by PCRE -whenever the caller of pcre_compile() does not provide an alternate set of -tables. */ - -#include "chartables.c" - - - -#ifdef SUPPORT_UTF8 -/************************************************* -* Tables for UTF-8 support * -*************************************************/ - -/* These are the breakpoints for different numbers of bytes in a UTF-8 -character. */ - -static int utf8_table1[] = { 0x7f, 0x7ff, 0xffff, 0x1fffff, 0x3ffffff, 0x7fffffff}; - -/* These are the indicator bits and the mask for the data bits to set in the -first byte of a character, indexed by the number of additional bytes. */ - -static int utf8_table2[] = { 0, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc}; -static int utf8_table3[] = { 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01}; - -/* Table of the number of extra characters, indexed by the first character -masked with 0x3f. The highest number for a valid UTF-8 character is in fact -0x3d. */ - -static uschar utf8_table4[] = { - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, - 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 }; - - -/************************************************* -* Convert character value to UTF-8 * -*************************************************/ - -/* This function takes an integer value in the range 0 - 0x7fffffff -and encodes it as a UTF-8 character in 0 to 6 bytes. - -Arguments: - cvalue the character value - buffer pointer to buffer for result - at least 6 bytes long - -Returns: number of characters placed in the buffer -*/ - -static int -ord2utf8(int cvalue, uschar *buffer) -{ -register int i, j; -for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++) - if (cvalue <= utf8_table1[i]) break; -buffer += i; -for (j = i; j > 0; j--) - { - *buffer-- = 0x80 | (cvalue & 0x3f); - cvalue >>= 6; - } -*buffer = utf8_table2[i] | cvalue; -return i + 1; -} -#endif - - - -/************************************************* -* Return version string * -*************************************************/ - -#define STRING(a) # a -#define XSTRING(s) STRING(s) - -const char * -pcre_version(void) -{ -return XSTRING(PCRE_MAJOR) "." XSTRING(PCRE_MINOR) " " XSTRING(PCRE_DATE); -} - - - - -/************************************************* -* (Obsolete) Return info about compiled pattern * -*************************************************/ - -/* This is the original "info" function. It picks potentially useful data out -of the private structure, but its interface was too rigid. It remains for -backwards compatibility. The public options are passed back in an int - though -the re->options field has been expanded to a long int, all the public options -at the low end of it, and so even on 16-bit systems this will still be OK. -Therefore, I haven't changed the API for pcre_info(). - -Arguments: - external_re points to compiled code - optptr where to pass back the options - first_char where to pass back the first character, - or -1 if multiline and all branches start ^, - or -2 otherwise - -Returns: number of capturing subpatterns - or negative values on error -*/ - -int -pcre_info(const pcre *external_re, int *optptr, int *first_char) -{ -const real_pcre *re = (const real_pcre *)external_re; -if (re == NULL) return PCRE_ERROR_NULL; -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; -if (optptr != NULL) *optptr = (int)(re->options & PUBLIC_OPTIONS); -if (first_char != NULL) - *first_char = ((re->options & PCRE_FIRSTSET) != 0)? re->first_char : - ((re->options & PCRE_STARTLINE) != 0)? -1 : -2; -return re->top_bracket; -} - - - -/************************************************* -* Return info about compiled pattern * -*************************************************/ - -/* This is a newer "info" function which has an extensible interface so -that additional items can be added compatibly. - -Arguments: - external_re points to compiled code - external_study points to study data, or NULL - what what information is required - where where to put the information - -Returns: 0 if data returned, negative on error -*/ - -int -pcre_fullinfo(const pcre *external_re, const pcre_extra *study_data, int what, - void *where) -{ -const real_pcre *re = (const real_pcre *)external_re; -const real_pcre_extra *study = (const real_pcre_extra *)study_data; - -if (re == NULL || where == NULL) return PCRE_ERROR_NULL; -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; - -switch (what) - { - case PCRE_INFO_OPTIONS: - *((unsigned long int *)where) = re->options & PUBLIC_OPTIONS; - break; - - case PCRE_INFO_SIZE: - *((size_t *)where) = re->size; - break; - - case PCRE_INFO_CAPTURECOUNT: - *((int *)where) = re->top_bracket; - break; - - case PCRE_INFO_BACKREFMAX: - *((int *)where) = re->top_backref; - break; - - case PCRE_INFO_FIRSTCHAR: - *((int *)where) = - ((re->options & PCRE_FIRSTSET) != 0)? re->first_char : - ((re->options & PCRE_STARTLINE) != 0)? -1 : -2; - break; - - case PCRE_INFO_FIRSTTABLE: - *((const uschar **)where) = - (study != NULL && (study->options & PCRE_STUDY_MAPPED) != 0)? - study->start_bits : NULL; - break; - - case PCRE_INFO_LASTLITERAL: - *((int *)where) = - ((re->options & PCRE_REQCHSET) != 0)? re->req_char : -1; - break; - - default: return PCRE_ERROR_BADOPTION; - } - -return 0; -} - - - -#ifdef DEBUG -/************************************************* -* Debugging function to print chars * -*************************************************/ - -/* Print a sequence of chars in printable format, stopping at the end of the -subject if the requested. - -Arguments: - p points to characters - length number to print - is_subject TRUE if printing from within md->start_subject - md pointer to matching data block, if is_subject is TRUE - -Returns: nothing -*/ - -static void -pchars(const uschar *p, int length, BOOL is_subject, match_data *md) -{ -int c; -if (is_subject && length > md->end_subject - p) length = md->end_subject - p; -while (length-- > 0) - if (isprint(c = *(p++))) printf("%c", c); else printf("\\x%02x", c); -} -#endif - - - - -/************************************************* -* Handle escapes * -*************************************************/ - -/* This function is called when a \ has been encountered. It either returns a -positive value for a simple escape such as \n, or a negative value which -encodes one of the more complicated things such as \d. When UTF-8 is enabled, -a positive value greater than 255 may be returned. On entry, ptr is pointing at -the \. On exit, it is on the final character of the escape sequence. - -Arguments: - ptrptr points to the pattern position pointer - errorptr points to the pointer to the error message - bracount number of previous extracting brackets - options the options bits - isclass TRUE if inside a character class - cd pointer to char tables block - -Returns: zero or positive => a data character - negative => a special escape sequence - on error, errorptr is set -*/ - -static int -check_escape(const uschar **ptrptr, const char **errorptr, int bracount, - int options, BOOL isclass, compile_data *cd) -{ -const uschar *ptr = *ptrptr; -int c, i; - -/* If backslash is at the end of the pattern, it's an error. */ - -c = *(++ptr); -if (c == 0) *errorptr = ERR1; - -/* Digits or letters may have special meaning; all others are literals. */ - -else if (c < '0' || c > 'z') {} - -/* Do an initial lookup in a table. A non-zero result is something that can be -returned immediately. Otherwise further processing may be required. */ - -else if ((i = escapes[c - '0']) != 0) c = i; - -/* Escapes that need further processing, or are illegal. */ - -else - { - const uschar *oldptr; - switch (c) - { - /* The handling of escape sequences consisting of a string of digits - starting with one that is not zero is not straightforward. By experiment, - the way Perl works seems to be as follows: - - Outside a character class, the digits are read as a decimal number. If the - number is less than 10, or if there are that many previous extracting - left brackets, then it is a back reference. Otherwise, up to three octal - digits are read to form an escaped byte. Thus \123 is likely to be octal - 123 (cf \0123, which is octal 012 followed by the literal 3). If the octal - value is greater than 377, the least significant 8 bits are taken. Inside a - character class, \ followed by a digit is always an octal number. */ - - case '1': case '2': case '3': case '4': case '5': - case '6': case '7': case '8': case '9': - - if (!isclass) - { - oldptr = ptr; - c -= '0'; - while ((cd->ctypes[ptr[1]] & ctype_digit) != 0) - c = c * 10 + *(++ptr) - '0'; - if (c < 10 || c <= bracount) - { - c = -(ESC_REF + c); - break; - } - ptr = oldptr; /* Put the pointer back and fall through */ - } - - /* Handle an octal number following \. If the first digit is 8 or 9, Perl - generates a binary zero byte and treats the digit as a following literal. - Thus we have to pull back the pointer by one. */ - - if ((c = *ptr) >= '8') - { - ptr--; - c = 0; - break; - } - - /* \0 always starts an octal number, but we may drop through to here with a - larger first octal digit. */ - - case '0': - c -= '0'; - while(i++ < 2 && (cd->ctypes[ptr[1]] & ctype_digit) != 0 && - ptr[1] != '8' && ptr[1] != '9') - c = c * 8 + *(++ptr) - '0'; - c &= 255; /* Take least significant 8 bits */ - break; - - /* \x is complicated when UTF-8 is enabled. \x{ddd} is a character number - which can be greater than 0xff, but only if the ddd are hex digits. */ - - case 'x': -#ifdef SUPPORT_UTF8 - if (ptr[1] == '{' && (options & PCRE_UTF8) != 0) - { - const uschar *pt = ptr + 2; - register int count = 0; - c = 0; - while ((cd->ctypes[*pt] & ctype_xdigit) != 0) - { - count++; - c = c * 16 + cd->lcc[*pt] - - (((cd->ctypes[*pt] & ctype_digit) != 0)? '0' : 'W'); - pt++; - } - if (*pt == '}') - { - if (c < 0 || count > 8) *errorptr = ERR34; - ptr = pt; - break; - } - /* If the sequence of hex digits does not end with '}', then we don't - recognize this construct; fall through to the normal \x handling. */ - } -#endif - - /* Read just a single hex char */ - - c = 0; - while (i++ < 2 && (cd->ctypes[ptr[1]] & ctype_xdigit) != 0) - { - ptr++; - c = c * 16 + cd->lcc[*ptr] - - (((cd->ctypes[*ptr] & ctype_digit) != 0)? '0' : 'W'); - } - break; - - /* Other special escapes not starting with a digit are straightforward */ - - case 'c': - c = *(++ptr); - if (c == 0) - { - *errorptr = ERR2; - return 0; - } - - /* A letter is upper-cased; then the 0x40 bit is flipped */ - - if (c >= 'a' && c <= 'z') c = cd->fcc[c]; - c ^= 0x40; - break; - - /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any - other alphameric following \ is an error if PCRE_EXTRA was set; otherwise, - for Perl compatibility, it is a literal. This code looks a bit odd, but - there used to be some cases other than the default, and there may be again - in future, so I haven't "optimized" it. */ - - default: - if ((options & PCRE_EXTRA) != 0) switch(c) - { - default: - *errorptr = ERR3; - break; - } - break; - } - } - -*ptrptr = ptr; -return c; -} - - - -/************************************************* -* Check for counted repeat * -*************************************************/ - -/* This function is called when a '{' is encountered in a place where it might -start a quantifier. It looks ahead to see if it really is a quantifier or not. -It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd} -where the ddds are digits. - -Arguments: - p pointer to the first char after '{' - cd pointer to char tables block - -Returns: TRUE or FALSE -*/ - -static BOOL -is_counted_repeat(const uschar *p, compile_data *cd) -{ -if ((cd->ctypes[*p++] & ctype_digit) == 0) return FALSE; -while ((cd->ctypes[*p] & ctype_digit) != 0) p++; -if (*p == '}') return TRUE; - -if (*p++ != ',') return FALSE; -if (*p == '}') return TRUE; - -if ((cd->ctypes[*p++] & ctype_digit) == 0) return FALSE; -while ((cd->ctypes[*p] & ctype_digit) != 0) p++; -return (*p == '}'); -} - - - -/************************************************* -* Read repeat counts * -*************************************************/ - -/* Read an item of the form {n,m} and return the values. This is called only -after is_counted_repeat() has confirmed that a repeat-count quantifier exists, -so the syntax is guaranteed to be correct, but we need to check the values. - -Arguments: - p pointer to first char after '{' - minp pointer to int for min - maxp pointer to int for max - returned as -1 if no max - errorptr points to pointer to error message - cd pointer to character tables clock - -Returns: pointer to '}' on success; - current ptr on error, with errorptr set -*/ - -static const uschar * -read_repeat_counts(const uschar *p, int *minp, int *maxp, - const char **errorptr, compile_data *cd) -{ -int min = 0; -int max = -1; - -/* Read the minimum value and do a paranoid check: a negative value indicates -an integer overflow. */ - -while ((cd->ctypes[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0'; - -if (min < 0 || min > 65535) { - *errorptr = ERR5; - return p; -} -/* Read the maximum value if there is one, and again do a paranoid on its size. -Also, max must not be less than min. */ - -if (*p == '}') max = min; else - { - if (*(++p) != '}') - { - max = 0; - while((cd->ctypes[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0'; - if (max < 0 || max > 65535) - { - *errorptr = ERR5; - return p; - } - if (max < min) - { - *errorptr = ERR4; - return p; - } - } - } - -/* Fill in the required variables, and pass back the pointer to the terminating -'}'. */ - -*minp = min; -*maxp = max; -return p; -} - - - -/************************************************* -* Find the fixed length of a pattern * -*************************************************/ - -/* Scan a pattern and compute the fixed length of subject that will match it, -if the length is fixed. This is needed for dealing with backward assertions. - -Arguments: - code points to the start of the pattern (the bracket) - options the compiling options - -Returns: the fixed length, or -1 if there is no fixed length -*/ - -static int -find_fixedlength(uschar *code, int options) -{ -int length = -1; - -register int branchlength = 0; -register uschar *cc = code + 3; - -/* Scan along the opcodes for this branch. If we get to the end of the -branch, check the length against that of the other branches. */ - -for (;;) - { - int d; - register int op = *cc; - if (op >= OP_BRA) op = OP_BRA; - - switch (op) - { - case OP_BRA: - case OP_ONCE: - case OP_COND: - d = find_fixedlength(cc, options); - if (d < 0) return -1; - branchlength += d; - do cc += (cc[1] << 8) + cc[2]; while (*cc == OP_ALT); - cc += 3; - break; - - /* Reached end of a branch; if it's a ket it is the end of a nested - call. If it's ALT it is an alternation in a nested call. If it is - END it's the end of the outer call. All can be handled by the same code. */ - - case OP_ALT: - case OP_KET: - case OP_KETRMAX: - case OP_KETRMIN: - case OP_END: - if (length < 0) length = branchlength; - else if (length != branchlength) return -1; - if (*cc != OP_ALT) return length; - cc += 3; - branchlength = 0; - break; - - /* Skip over assertive subpatterns */ - - case OP_ASSERT: - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - do cc += (cc[1] << 8) + cc[2]; while (*cc == OP_ALT); - cc += 3; - break; - - /* Skip over things that don't match chars */ - - case OP_REVERSE: - case OP_BRANUMBER: - case OP_CREF: - cc++; - /* Fall through */ - - case OP_OPT: - cc++; - /* Fall through */ - - case OP_SOD: - case OP_EOD: - case OP_EODN: - case OP_CIRC: - case OP_DOLL: - case OP_NOT_WORD_BOUNDARY: - case OP_WORD_BOUNDARY: - cc++; - break; - - /* Handle char strings. In UTF-8 mode we must count characters, not bytes. - This requires a scan of the string, unfortunately. We assume valid UTF-8 - strings, so all we do is reduce the length by one for byte whose bits are - 10xxxxxx. */ - - case OP_CHARS: - branchlength += *(++cc); -#ifdef SUPPORT_UTF8 - for (d = 1; d <= *cc; d++) - if ((cc[d] & 0xc0) == 0x80) branchlength--; -#endif - cc += *cc + 1; - break; - - /* Handle exact repetitions */ - - case OP_EXACT: - case OP_TYPEEXACT: - branchlength += (cc[1] << 8) + cc[2]; - cc += 4; - break; - - /* Handle single-char matchers */ - - case OP_NOT_DIGIT: - case OP_DIGIT: - case OP_NOT_WHITESPACE: - case OP_WHITESPACE: - case OP_NOT_WORDCHAR: - case OP_WORDCHAR: - case OP_ANY: - branchlength++; - cc++; - break; - - - /* Check a class for variable quantification */ - - case OP_CLASS: - cc += 33; - - switch (*cc) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRQUERY: - case OP_CRMINQUERY: - return -1; - - case OP_CRRANGE: - case OP_CRMINRANGE: - if ((cc[1] << 8) + cc[2] != (cc[3] << 8) + cc[4]) return -1; - branchlength += (cc[1] << 8) + cc[2]; - cc += 5; - break; - - default: - branchlength++; - } - break; - - /* Anything else is variable length */ - - default: - return -1; - } - } -/* Control never gets here */ -} - - - - -/************************************************* -* Check for POSIX class syntax * -*************************************************/ - -/* This function is called when the sequence "[:" or "[." or "[=" is -encountered in a character class. It checks whether this is followed by an -optional ^ and then a sequence of letters, terminated by a matching ":]" or -".]" or "=]". - -Argument: - ptr pointer to the initial [ - endptr where to return the end pointer - cd pointer to compile data - -Returns: TRUE or FALSE -*/ - -static BOOL -check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd) -{ -int terminator; /* Don't combine these lines; the Solaris cc */ -terminator = *(++ptr); /* compiler warns about "non-constant" initializer. */ -if (*(++ptr) == '^') ptr++; -while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++; -if (*ptr == terminator && ptr[1] == ']') - { - *endptr = ptr; - return TRUE; - } -return FALSE; -} - - - - -/************************************************* -* Check POSIX class name * -*************************************************/ - -/* This function is called to check the name given in a POSIX-style class entry -such as [:alnum:]. - -Arguments: - ptr points to the first letter - len the length of the name - -Returns: a value representing the name, or -1 if unknown -*/ - -static int -check_posix_name(const uschar *ptr, int len) -{ -register int yield = 0; -while (posix_name_lengths[yield] != 0) - { - if (len == posix_name_lengths[yield] && - strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield; - yield++; - } -return -1; -} - - - - -/************************************************* -* Compile one branch * -*************************************************/ - -/* Scan the pattern, compiling it into the code vector. - -Arguments: - options the option bits - brackets points to number of extracting brackets used - code points to the pointer to the current code point - ptrptr points to the current pattern pointer - errorptr points to pointer to error message - optchanged set to the value of the last OP_OPT item compiled - reqchar set to the last literal character required, else -1 - countlits set to count of mandatory literal characters - cd contains pointers to tables - -Returns: TRUE on success - FALSE, with *errorptr set on error -*/ - -static BOOL -compile_branch(int options, int *brackets, uschar **codeptr, - const uschar **ptrptr, const char **errorptr, int *optchanged, - int *reqchar, int *countlits, compile_data *cd) -{ -int repeat_type, op_type; -int repeat_min, repeat_max; -int bravalue, length; -int greedy_default, greedy_non_default; -int prevreqchar; -int condcount = 0; -int subcountlits = 0; -register int c; -register uschar *code = *codeptr; -uschar *tempcode; -const uschar *ptr = *ptrptr; -const uschar *tempptr; -uschar *previous = NULL; -uschar class[32]; - -/* Set up the default and non-default settings for greediness */ - -greedy_default = ((options & PCRE_UNGREEDY) != 0); -greedy_non_default = greedy_default ^ 1; - -/* Initialize no required char, and count of literals */ - -*reqchar = prevreqchar = -1; -*countlits = 0; - -/* Switch on next character until the end of the branch */ - -for (;; ptr++) - { - BOOL negate_class; - int class_charcount; - int class_lastchar; - int newoptions; - int skipbytes; - int subreqchar; - - c = *ptr; - if ((options & PCRE_EXTENDED) != 0) - { - if ((cd->ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != NEWLINE) ; - continue; - } - } - - switch(c) - { - /* The branch terminates at end of string, |, or ). */ - - case 0: - case '|': - case ')': - *codeptr = code; - *ptrptr = ptr; - return TRUE; - - /* Handle single-character metacharacters */ - - case '^': - previous = NULL; - *code++ = OP_CIRC; - break; - - case '$': - previous = NULL; - *code++ = OP_DOLL; - break; - - case '.': - previous = code; - *code++ = OP_ANY; - break; - - /* Character classes. These always build a 32-byte bitmap of the permitted - characters, except in the special case where there is only one character. - For negated classes, we build the map as usual, then invert it at the end. - */ - - case '[': - previous = code; - *code++ = OP_CLASS; - - /* If the first character is '^', set the negation flag and skip it. */ - - if ((c = *(++ptr)) == '^') - { - negate_class = TRUE; - c = *(++ptr); - } - else negate_class = FALSE; - - /* Keep a count of chars so that we can optimize the case of just a single - character. */ - - class_charcount = 0; - class_lastchar = -1; - - /* Initialize the 32-char bit map to all zeros. We have to build the - map in a temporary bit of store, in case the class contains only 1 - character, because in that case the compiled code doesn't use the - bit map. */ - - memset(class, 0, 32 * sizeof(uschar)); - - /* Process characters until ] is reached. By writing this as a "do" it - means that an initial ] is taken as a data character. */ - - do - { - if (c == 0) - { - *errorptr = ERR6; - goto FAILED; - } - - /* Handle POSIX class names. Perl allows a negation extension of the - form [:^name]. A square bracket that doesn't match the syntax is - treated as a literal. We also recognize the POSIX constructions - [.ch.] and [=ch=] ("collating elements") and fault them, as Perl - 5.6 does. */ - - if (c == '[' && - (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') && - check_posix_syntax(ptr, &tempptr, cd)) - { - BOOL local_negate = FALSE; - int posix_class, i; - register const uschar *cbits = cd->cbits; - - if (ptr[1] != ':') - { - *errorptr = ERR31; - goto FAILED; - } - - ptr += 2; - if (*ptr == '^') - { - local_negate = TRUE; - ptr++; - } - - posix_class = check_posix_name(ptr, tempptr - ptr); - if (posix_class < 0) - { - *errorptr = ERR30; - goto FAILED; - } - - /* If matching is caseless, upper and lower are converted to - alpha. This relies on the fact that the class table starts with - alpha, lower, upper as the first 3 entries. */ - - if ((options & PCRE_CASELESS) != 0 && posix_class <= 2) - posix_class = 0; - - /* Or into the map we are building up to 3 of the static class - tables, or their negations. */ - - posix_class *= 3; - for (i = 0; i < 3; i++) - { - int taboffset = posix_class_maps[posix_class + i]; - if (taboffset < 0) break; - if (local_negate) - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+taboffset]; - else - for (c = 0; c < 32; c++) class[c] |= cbits[c+taboffset]; - } - - ptr = tempptr + 1; - class_charcount = 10; /* Set > 1; assumes more than 1 per class */ - continue; - } - - /* Backslash may introduce a single character, or it may introduce one - of the specials, which just set a flag. Escaped items are checked for - validity in the pre-compiling pass. The sequence \b is a special case. - Inside a class (and only there) it is treated as backspace. Elsewhere - it marks a word boundary. Other escapes have preset maps ready to - or into the one we are building. We assume they have more than one - character in them, so set class_count bigger than one. */ - - if (c == '\\') - { - c = check_escape(&ptr, errorptr, *brackets, options, TRUE, cd); - if (-c == ESC_b) c = '\b'; - else if (c < 0) - { - register const uschar *cbits = cd->cbits; - class_charcount = 10; - switch (-c) - { - case ESC_d: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_digit]; - continue; - - case ESC_D: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_digit]; - continue; - - case ESC_w: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_word]; - continue; - - case ESC_W: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_word]; - continue; - - case ESC_s: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_space]; - continue; - - case ESC_S: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_space]; - continue; - - default: - *errorptr = ERR7; - goto FAILED; - } - } - - /* Fall through if single character, but don't at present allow - chars > 255 in UTF-8 mode. */ - -#ifdef SUPPORT_UTF8 - if (c > 255) - { - *errorptr = ERR33; - goto FAILED; - } -#endif - } - - /* A single character may be followed by '-' to form a range. However, - Perl does not permit ']' to be the end of the range. A '-' character - here is treated as a literal. */ - - if (ptr[1] == '-' && ptr[2] != ']') - { - int d; - ptr += 2; - d = *ptr; - - if (d == 0) - { - *errorptr = ERR6; - goto FAILED; - } - - /* The second part of a range can be a single-character escape, but - not any of the other escapes. Perl 5.6 treats a hyphen as a literal - in such circumstances. */ - - if (d == '\\') - { - const uschar *oldptr = ptr; - d = check_escape(&ptr, errorptr, *brackets, options, TRUE, cd); - -#ifdef SUPPORT_UTF8 - if (d > 255) - { - *errorptr = ERR33; - goto FAILED; - } -#endif - /* \b is backslash; any other special means the '-' was literal */ - - if (d < 0) - { - if (d == -ESC_b) d = '\b'; else - { - ptr = oldptr - 2; - goto SINGLE_CHARACTER; /* A few lines below */ - } - } - } - - if (d < c) - { - *errorptr = ERR8; - goto FAILED; - } - - for (; c <= d; c++) - { - class[c/8] |= (1 << (c&7)); - if ((options & PCRE_CASELESS) != 0) - { - int uc = cd->fcc[c]; /* flip case */ - class[uc/8] |= (1 << (uc&7)); - } - class_charcount++; /* in case a one-char range */ - class_lastchar = c; - } - continue; /* Go get the next char in the class */ - } - - /* Handle a lone single character - we can get here for a normal - non-escape char, or after \ that introduces a single character. */ - - SINGLE_CHARACTER: - - class [c/8] |= (1 << (c&7)); - if ((options & PCRE_CASELESS) != 0) - { - c = cd->fcc[c]; /* flip case */ - class[c/8] |= (1 << (c&7)); - } - class_charcount++; - class_lastchar = c; - } - - /* Loop until ']' reached; the check for end of string happens inside the - loop. This "while" is the end of the "do" above. */ - - while ((c = *(++ptr)) != ']'); - - /* If class_charcount is 1 and class_lastchar is not negative, we saw - precisely one character. This doesn't need the whole 32-byte bit map. - We turn it into a 1-character OP_CHAR if it's positive, or OP_NOT if - it's negative. */ - - if (class_charcount == 1 && class_lastchar >= 0) - { - if (negate_class) - { - code[-1] = OP_NOT; - } - else - { - code[-1] = OP_CHARS; - *code++ = 1; - } - *code++ = class_lastchar; - } - - /* Otherwise, negate the 32-byte map if necessary, and copy it into - the code vector. */ - - else - { - if (negate_class) - for (c = 0; c < 32; c++) code[c] = ~class[c]; - else - memcpy(code, class, 32); - code += 32; - } - break; - - /* Various kinds of repeat */ - - case '{': - if (!is_counted_repeat(ptr+1, cd)) goto NORMAL_CHAR; - ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorptr, cd); - if (*errorptr != NULL) goto FAILED; - goto REPEAT; - - case '*': - repeat_min = 0; - repeat_max = -1; - goto REPEAT; - - case '+': - repeat_min = 1; - repeat_max = -1; - goto REPEAT; - - case '?': - repeat_min = 0; - repeat_max = 1; - - REPEAT: - if (previous == NULL) - { - *errorptr = ERR9; - goto FAILED; - } - - /* If the next character is '?' this is a minimizing repeat, by default, - but if PCRE_UNGREEDY is set, it works the other way round. Advance to the - next character. */ - - if (ptr[1] == '?') - { repeat_type = greedy_non_default; ptr++; } - else repeat_type = greedy_default; - - /* If previous was a string of characters, chop off the last one and use it - as the subject of the repeat. If there was only one character, we can - abolish the previous item altogether. A repeat with a zero minimum wipes - out any reqchar setting, backing up to the previous value. We must also - adjust the countlits value. */ - - if (*previous == OP_CHARS) - { - int len = previous[1]; - - if (repeat_min == 0) *reqchar = prevreqchar; - *countlits += repeat_min - 1; - - if (len == 1) - { - c = previous[2]; - code = previous; - } - else - { - c = previous[len+1]; - previous[1]--; - code--; - } - op_type = 0; /* Use single-char op codes */ - goto OUTPUT_SINGLE_REPEAT; /* Code shared with single character types */ - } - - /* If previous was a single negated character ([^a] or similar), we use - one of the special opcodes, replacing it. The code is shared with single- - character repeats by adding a suitable offset into repeat_type. */ - - else if ((int)*previous == OP_NOT) - { - op_type = OP_NOTSTAR - OP_STAR; /* Use "not" opcodes */ - c = previous[1]; - code = previous; - goto OUTPUT_SINGLE_REPEAT; - } - - /* If previous was a character type match (\d or similar), abolish it and - create a suitable repeat item. The code is shared with single-character - repeats by adding a suitable offset into repeat_type. */ - - else if ((int)*previous < OP_EODN || *previous == OP_ANY) - { - op_type = OP_TYPESTAR - OP_STAR; /* Use type opcodes */ - c = *previous; - code = previous; - - OUTPUT_SINGLE_REPEAT: - - /* If the maximum is zero then the minimum must also be zero; Perl allows - this case, so we do too - by simply omitting the item altogether. */ - - if (repeat_max == 0) goto END_REPEAT; - - /* Combine the op_type with the repeat_type */ - - repeat_type += op_type; - - /* A minimum of zero is handled either as the special case * or ?, or as - an UPTO, with the maximum given. */ - - if (repeat_min == 0) - { - if (repeat_max == -1) *code++ = OP_STAR + repeat_type; - else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type; - else - { - *code++ = OP_UPTO + repeat_type; - *code++ = repeat_max >> 8; - *code++ = (repeat_max & 255); - } - } - - /* The case {1,} is handled as the special case + */ - - else if (repeat_min == 1 && repeat_max == -1) - *code++ = OP_PLUS + repeat_type; - - /* The case {n,n} is just an EXACT, while the general case {n,m} is - handled as an EXACT followed by an UPTO. An EXACT of 1 is optimized. */ - - else - { - if (repeat_min != 1) - { - *code++ = OP_EXACT + op_type; /* NB EXACT doesn't have repeat_type */ - *code++ = repeat_min >> 8; - *code++ = (repeat_min & 255); - } - - /* If the mininum is 1 and the previous item was a character string, - we either have to put back the item that got cancelled if the string - length was 1, or add the character back onto the end of a longer - string. For a character type nothing need be done; it will just get - put back naturally. Note that the final character is always going to - get added below. */ - - else if (*previous == OP_CHARS) - { - if (code == previous) code += 2; else previous[1]++; - } - - /* For a single negated character we also have to put back the - item that got cancelled. */ - - else if (*previous == OP_NOT) code++; - - /* If the maximum is unlimited, insert an OP_STAR. */ - - if (repeat_max < 0) - { - *code++ = c; - *code++ = OP_STAR + repeat_type; - } - - /* Else insert an UPTO if the max is greater than the min. */ - - else if (repeat_max != repeat_min) - { - *code++ = c; - repeat_max -= repeat_min; - *code++ = OP_UPTO + repeat_type; - *code++ = repeat_max >> 8; - *code++ = (repeat_max & 255); - } - } - - /* The character or character type itself comes last in all cases. */ - - *code++ = c; - } - - /* If previous was a character class or a back reference, we put the repeat - stuff after it, but just skip the item if the repeat was {0,0}. */ - - else if (*previous == OP_CLASS || *previous == OP_REF) - { - if (repeat_max == 0) - { - code = previous; - goto END_REPEAT; - } - if (repeat_min == 0 && repeat_max == -1) - *code++ = OP_CRSTAR + repeat_type; - else if (repeat_min == 1 && repeat_max == -1) - *code++ = OP_CRPLUS + repeat_type; - else if (repeat_min == 0 && repeat_max == 1) - *code++ = OP_CRQUERY + repeat_type; - else - { - *code++ = OP_CRRANGE + repeat_type; - *code++ = repeat_min >> 8; - *code++ = repeat_min & 255; - if (repeat_max == -1) repeat_max = 0; /* 2-byte encoding for max */ - *code++ = repeat_max >> 8; - *code++ = repeat_max & 255; - } - } - - /* If previous was a bracket group, we may have to replicate it in certain - cases. */ - - else if ((int)*previous >= OP_BRA || (int)*previous == OP_ONCE || - (int)*previous == OP_COND) - { - register int i; - int ketoffset = 0; - int len = code - previous; - uschar *bralink = NULL; - - /* If the maximum repeat count is unlimited, find the end of the bracket - by scanning through from the start, and compute the offset back to it - from the current code pointer. There may be an OP_OPT setting following - the final KET, so we can't find the end just by going back from the code - pointer. */ - - if (repeat_max == -1) - { - register uschar *ket = previous; - do ket += (ket[1] << 8) + ket[2]; while (*ket != OP_KET); - ketoffset = code - ket; - } - - /* The case of a zero minimum is special because of the need to stick - OP_BRAZERO in front of it, and because the group appears once in the - data, whereas in other cases it appears the minimum number of times. For - this reason, it is simplest to treat this case separately, as otherwise - the code gets far too messy. There are several special subcases when the - minimum is zero. */ - - if (repeat_min == 0) - { - /* If we set up a required char from the bracket, we must back off - to the previous value and reset the countlits value too. */ - - if (subcountlits > 0) - { - *reqchar = prevreqchar; - *countlits -= subcountlits; - } - - /* If the maximum is also zero, we just omit the group from the output - altogether. */ - - if (repeat_max == 0) - { - code = previous; - goto END_REPEAT; - } - - /* If the maximum is 1 or unlimited, we just have to stick in the - BRAZERO and do no more at this point. */ - - if (repeat_max <= 1) - { - memmove(previous+1, previous, len); - code++; - *previous++ = OP_BRAZERO + repeat_type; - } - - /* If the maximum is greater than 1 and limited, we have to replicate - in a nested fashion, sticking OP_BRAZERO before each set of brackets. - The first one has to be handled carefully because it's the original - copy, which has to be moved up. The remainder can be handled by code - that is common with the non-zero minimum case below. We just have to - adjust the value or repeat_max, since one less copy is required. */ - - else - { - int offset; - memmove(previous+4, previous, len); - code += 4; - *previous++ = OP_BRAZERO + repeat_type; - *previous++ = OP_BRA; - - /* We chain together the bracket offset fields that have to be - filled in later when the ends of the brackets are reached. */ - - offset = (bralink == NULL)? 0 : previous - bralink; - bralink = previous; - *previous++ = offset >> 8; - *previous++ = offset & 255; - } - - repeat_max--; - } - - /* If the minimum is greater than zero, replicate the group as many - times as necessary, and adjust the maximum to the number of subsequent - copies that we need. */ - - else - { - for (i = 1; i < repeat_min; i++) - { - memcpy(code, previous, len); - code += len; - } - if (repeat_max > 0) repeat_max -= repeat_min; - } - - /* This code is common to both the zero and non-zero minimum cases. If - the maximum is limited, it replicates the group in a nested fashion, - remembering the bracket starts on a stack. In the case of a zero minimum, - the first one was set up above. In all cases the repeat_max now specifies - the number of additional copies needed. */ - - if (repeat_max >= 0) - { - for (i = repeat_max - 1; i >= 0; i--) - { - *code++ = OP_BRAZERO + repeat_type; - - /* All but the final copy start a new nesting, maintaining the - chain of brackets outstanding. */ - - if (i != 0) - { - int offset; - *code++ = OP_BRA; - offset = (bralink == NULL)? 0 : code - bralink; - bralink = code; - *code++ = offset >> 8; - *code++ = offset & 255; - } - - memcpy(code, previous, len); - code += len; - } - - /* Now chain through the pending brackets, and fill in their length - fields (which are holding the chain links pro tem). */ - - while (bralink != NULL) - { - int oldlinkoffset; - int offset = code - bralink + 1; - uschar *bra = code - offset; - oldlinkoffset = (bra[1] << 8) + bra[2]; - bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset; - *code++ = OP_KET; - *code++ = bra[1] = offset >> 8; - *code++ = bra[2] = (offset & 255); - } - } - - /* If the maximum is unlimited, set a repeater in the final copy. We - can't just offset backwards from the current code point, because we - don't know if there's been an options resetting after the ket. The - correct offset was computed above. */ - - else code[-ketoffset] = OP_KETRMAX + repeat_type; - } - - /* Else there's some kind of shambles */ - - else - { - *errorptr = ERR11; - goto FAILED; - } - - /* In all case we no longer have a previous item. */ - - END_REPEAT: - previous = NULL; - break; - - - /* Start of nested bracket sub-expression, or comment or lookahead or - lookbehind or option setting or condition. First deal with special things - that can come after a bracket; all are introduced by ?, and the appearance - of any of them means that this is not a referencing group. They were - checked for validity in the first pass over the string, so we don't have to - check for syntax errors here. */ - - case '(': - newoptions = options; - skipbytes = 0; - - if (*(++ptr) == '?') - { - int set, unset; - int *optset; - - switch (*(++ptr)) - { - case '#': /* Comment; skip to ket */ - ptr++; - while (*ptr != ')') ptr++; - continue; - - case ':': /* Non-extracting bracket */ - bravalue = OP_BRA; - ptr++; - break; - - case '(': - bravalue = OP_COND; /* Conditional group */ - if ((cd->ctypes[*(++ptr)] & ctype_digit) != 0) - { - int condref = *ptr - '0'; - while (*(++ptr) != ')') condref = condref*10 + *ptr - '0'; - if (condref == 0) - { - *errorptr = ERR35; - goto FAILED; - } - ptr++; - code[3] = OP_CREF; - code[4] = condref >> 8; - code[5] = condref & 255; - skipbytes = 3; - } - else ptr--; - break; - - case '=': /* Positive lookahead */ - bravalue = OP_ASSERT; - ptr++; - break; - - case '!': /* Negative lookahead */ - bravalue = OP_ASSERT_NOT; - ptr++; - break; - - case '<': /* Lookbehinds */ - switch (*(++ptr)) - { - case '=': /* Positive lookbehind */ - bravalue = OP_ASSERTBACK; - ptr++; - break; - - case '!': /* Negative lookbehind */ - bravalue = OP_ASSERTBACK_NOT; - ptr++; - break; - - default: /* Syntax error */ - *errorptr = ERR24; - goto FAILED; - } - break; - - case '>': /* One-time brackets */ - bravalue = OP_ONCE; - ptr++; - break; - - case 'R': /* Pattern recursion */ - *code++ = OP_RECURSE; - ptr++; - continue; - - default: /* Option setting */ - set = unset = 0; - optset = &set; - - while (*ptr != ')' && *ptr != ':') - { - switch (*ptr++) - { - case '-': optset = &unset; break; - - case 'i': *optset |= PCRE_CASELESS; break; - case 'm': *optset |= PCRE_MULTILINE; break; - case 's': *optset |= PCRE_DOTALL; break; - case 'x': *optset |= PCRE_EXTENDED; break; - case 'U': *optset |= PCRE_UNGREEDY; break; - case 'X': *optset |= PCRE_EXTRA; break; - - default: - *errorptr = ERR12; - goto FAILED; - } - } - - /* Set up the changed option bits, but don't change anything yet. */ - - newoptions = (options | set) & (~unset); - - /* If the options ended with ')' this is not the start of a nested - group with option changes, so the options change at this level. At top - level there is nothing else to be done (the options will in fact have - been set from the start of compiling as a result of the first pass) but - at an inner level we must compile code to change the ims options if - necessary, and pass the new setting back so that it can be put at the - start of any following branches, and when this group ends, a resetting - item can be compiled. */ - - if (*ptr == ')') - { - if ((options & PCRE_INGROUP) != 0 && - (options & PCRE_IMS) != (newoptions & PCRE_IMS)) - { - *code++ = OP_OPT; - *code++ = *optchanged = newoptions & PCRE_IMS; - } - options = newoptions; /* Change options at this level */ - previous = NULL; /* This item can't be repeated */ - continue; /* It is complete */ - } - - /* If the options ended with ':' we are heading into a nested group - with possible change of options. Such groups are non-capturing and are - not assertions of any kind. All we need to do is skip over the ':'; - the newoptions value is handled below. */ - - bravalue = OP_BRA; - ptr++; - } - } - - /* Else we have a referencing group; adjust the opcode. If the bracket - number is greater than EXTRACT_BASIC_MAX, we set the opcode one higher, and - arrange for the true number to follow later, in an OP_BRANUMBER item. */ - - else - { - if (++(*brackets) > EXTRACT_BASIC_MAX) - { - bravalue = OP_BRA + EXTRACT_BASIC_MAX + 1; - code[3] = OP_BRANUMBER; - code[4] = *brackets >> 8; - code[5] = *brackets & 255; - skipbytes = 3; - } - else bravalue = OP_BRA + *brackets; - } - - /* Process nested bracketed re. Assertions may not be repeated, but other - kinds can be. We copy code into a non-register variable in order to be able - to pass its address because some compilers complain otherwise. Pass in a - new setting for the ims options if they have changed. */ - - previous = (bravalue >= OP_ONCE)? code : NULL; - *code = bravalue; - tempcode = code; - - if (!compile_regex( - options | PCRE_INGROUP, /* Set for all nested groups */ - ((options & PCRE_IMS) != (newoptions & PCRE_IMS))? - newoptions & PCRE_IMS : -1, /* Pass ims options if changed */ - brackets, /* Extracting bracket count */ - &tempcode, /* Where to put code (updated) */ - &ptr, /* Input pointer (updated) */ - errorptr, /* Where to put an error message */ - (bravalue == OP_ASSERTBACK || - bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */ - skipbytes, /* Skip over OP_COND/OP_BRANUMBER */ - &subreqchar, /* For possible last char */ - &subcountlits, /* For literal count */ - cd)) /* Tables block */ - goto FAILED; - - /* At the end of compiling, code is still pointing to the start of the - group, while tempcode has been updated to point past the end of the group - and any option resetting that may follow it. The pattern pointer (ptr) - is on the bracket. */ - - /* If this is a conditional bracket, check that there are no more than - two branches in the group. */ - - else if (bravalue == OP_COND) - { - uschar *tc = code; - condcount = 0; - - do { - condcount++; - tc += (tc[1] << 8) | tc[2]; - } - while (*tc != OP_KET); - - if (condcount > 2) - { - *errorptr = ERR27; - goto FAILED; - } - } - - /* Handle updating of the required character. If the subpattern didn't - set one, leave it as it was. Otherwise, update it for normal brackets of - all kinds, forward assertions, and conditions with two branches. Don't - update the literal count for forward assertions, however. If the bracket - is followed by a quantifier with zero repeat, we have to back off. Hence - the definition of prevreqchar and subcountlits outside the main loop so - that they can be accessed for the back off. */ - - if (subreqchar > 0 && - (bravalue >= OP_BRA || bravalue == OP_ONCE || bravalue == OP_ASSERT || - (bravalue == OP_COND && condcount == 2))) - { - prevreqchar = *reqchar; - *reqchar = subreqchar; - if (bravalue != OP_ASSERT) *countlits += subcountlits; - } - - /* Now update the main code pointer to the end of the group. */ - - code = tempcode; - - /* Error if hit end of pattern */ - - if (*ptr != ')') - { - *errorptr = ERR14; - goto FAILED; - } - break; - - /* Check \ for being a real metacharacter; if not, fall through and handle - it as a data character at the start of a string. Escape items are checked - for validity in the pre-compiling pass. */ - - case '\\': - tempptr = ptr; - c = check_escape(&ptr, errorptr, *brackets, options, FALSE, cd); - - /* Handle metacharacters introduced by \. For ones like \d, the ESC_ values - are arranged to be the negation of the corresponding OP_values. For the - back references, the values are ESC_REF plus the reference number. Only - back references and those types that consume a character may be repeated. - We can test for values between ESC_b and ESC_Z for the latter; this may - have to change if any new ones are ever created. */ - - if (c < 0) - { - if (-c >= ESC_REF) - { - int number = -c - ESC_REF; - previous = code; - *code++ = OP_REF; - *code++ = number >> 8; - *code++ = number & 255; - } - else - { - previous = (-c > ESC_b && -c < ESC_Z)? code : NULL; - *code++ = -c; - } - continue; - } - - /* Data character: reset and fall through */ - - ptr = tempptr; - c = '\\'; - - /* Handle a run of data characters until a metacharacter is encountered. - The first character is guaranteed not to be whitespace or # when the - extended flag is set. */ - - NORMAL_CHAR: - default: - previous = code; - *code = OP_CHARS; - code += 2; - length = 0; - - do - { - if ((options & PCRE_EXTENDED) != 0) - { - if ((cd->ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != NEWLINE) ; - if (c == 0) break; - continue; - } - } - - /* Backslash may introduce a data char or a metacharacter. Escaped items - are checked for validity in the pre-compiling pass. Stop the string - before a metaitem. */ - - if (c == '\\') - { - tempptr = ptr; - c = check_escape(&ptr, errorptr, *brackets, options, FALSE, cd); - if (c < 0) { ptr = tempptr; break; } - - /* If a character is > 127 in UTF-8 mode, we have to turn it into - two or more characters in the UTF-8 encoding. */ - -#ifdef SUPPORT_UTF8 - if (c > 127 && (options & PCRE_UTF8) != 0) - { - uschar buffer[8]; - int len = ord2utf8(c, buffer); - for (c = 0; c < len; c++) *code++ = buffer[c]; - length += len; - continue; - } -#endif - } - - /* Ordinary character or single-char escape */ - - *code++ = c; - length++; - } - - /* This "while" is the end of the "do" above. */ - - while (length < MAXLIT && (cd->ctypes[c = *(++ptr)] & ctype_meta) == 0); - - /* Update the last character and the count of literals */ - - prevreqchar = (length > 1)? code[-2] : *reqchar; - *reqchar = code[-1]; - *countlits += length; - - /* Compute the length and set it in the data vector, and advance to - the next state. */ - - previous[1] = length; - if (length < MAXLIT) ptr--; - break; - } - } /* end of big loop */ - -/* Control never reaches here by falling through, only by a goto for all the -error states. Pass back the position in the pattern so that it can be displayed -to the user for diagnosing the error. */ - -FAILED: -*ptrptr = ptr; -return FALSE; -} - - - - -/************************************************* -* Compile sequence of alternatives * -*************************************************/ - -/* On entry, ptr is pointing past the bracket character, but on return -it points to the closing bracket, or vertical bar, or end of string. -The code variable is pointing at the byte into which the BRA operator has been -stored. If the ims options are changed at the start (for a (?ims: group) or -during any branch, we need to insert an OP_OPT item at the start of every -following branch to ensure they get set correctly at run time, and also pass -the new options into every subsequent branch compile. - -Argument: - options the option bits - optchanged new ims options to set as if (?ims) were at the start, or -1 - for no change - brackets -> int containing the number of extracting brackets used - codeptr -> the address of the current code pointer - ptrptr -> the address of the current pattern pointer - errorptr -> pointer to error message - lookbehind TRUE if this is a lookbehind assertion - skipbytes skip this many bytes at start (for OP_COND, OP_BRANUMBER) - reqchar -> place to put the last required character, or a negative number - countlits -> place to put the shortest literal count of any branch - cd points to the data block with tables pointers - -Returns: TRUE on success -*/ - -static BOOL -compile_regex(int options, int optchanged, int *brackets, uschar **codeptr, - const uschar **ptrptr, const char **errorptr, BOOL lookbehind, int skipbytes, - int *reqchar, int *countlits, compile_data *cd) -{ -const uschar *ptr = *ptrptr; -uschar *code = *codeptr; -uschar *last_branch = code; -uschar *start_bracket = code; -uschar *reverse_count = NULL; -int oldoptions = options & PCRE_IMS; -int branchreqchar, branchcountlits; - -*reqchar = -1; -*countlits = INT_MAX; -code += 3 + skipbytes; - -/* Loop for each alternative branch */ - -for (;;) - { - int length; - - /* Handle change of options */ - - if (optchanged >= 0) - { - *code++ = OP_OPT; - *code++ = optchanged; - options = (options & ~PCRE_IMS) | optchanged; - } - - /* Set up dummy OP_REVERSE if lookbehind assertion */ - - if (lookbehind) - { - *code++ = OP_REVERSE; - reverse_count = code; - *code++ = 0; - *code++ = 0; - } - - /* Now compile the branch */ - - if (!compile_branch(options, brackets, &code, &ptr, errorptr, &optchanged, - &branchreqchar, &branchcountlits, cd)) - { - *ptrptr = ptr; - return FALSE; - } - - /* Fill in the length of the last branch */ - - length = code - last_branch; - last_branch[1] = length >> 8; - last_branch[2] = length & 255; - - /* Save the last required character if all branches have the same; a current - value of -1 means unset, while -2 means "previous branch had no last required - char". */ - - if (*reqchar != -2) - { - if (branchreqchar >= 0) - { - if (*reqchar == -1) *reqchar = branchreqchar; - else if (*reqchar != branchreqchar) *reqchar = -2; - } - else *reqchar = -2; - } - - /* Keep the shortest literal count */ - - if (branchcountlits < *countlits) *countlits = branchcountlits; - DPRINTF(("literal count = %d min=%d\n", branchcountlits, *countlits)); - - /* If lookbehind, check that this branch matches a fixed-length string, - and put the length into the OP_REVERSE item. Temporarily mark the end of - the branch with OP_END. */ - - if (lookbehind) - { - *code = OP_END; - length = find_fixedlength(last_branch, options); - DPRINTF(("fixed length = %d\n", length)); - if (length < 0) - { - *errorptr = ERR25; - *ptrptr = ptr; - return FALSE; - } - reverse_count[0] = (length >> 8); - reverse_count[1] = length & 255; - } - - /* Reached end of expression, either ')' or end of pattern. Insert a - terminating ket and the length of the whole bracketed item, and return, - leaving the pointer at the terminating char. If any of the ims options - were changed inside the group, compile a resetting op-code following. */ - - if (*ptr != '|') - { - length = code - start_bracket; - *code++ = OP_KET; - *code++ = length >> 8; - *code++ = length & 255; - if (optchanged >= 0) - { - *code++ = OP_OPT; - *code++ = oldoptions; - } - *codeptr = code; - *ptrptr = ptr; - return TRUE; - } - - /* Another branch follows; insert an "or" node and advance the pointer. */ - - *code = OP_ALT; - last_branch = code; - code += 3; - ptr++; - } -/* Control never reaches here */ -} - - - - -/************************************************* -* Find first significant op code * -*************************************************/ - -/* This is called by several functions that scan a compiled expression looking -for a fixed first character, or an anchoring op code etc. It skips over things -that do not influence this. For one application, a change of caseless option is -important. - -Arguments: - code pointer to the start of the group - options pointer to external options - optbit the option bit whose changing is significant, or - zero if none are - optstop TRUE to return on option change, otherwise change the options - value and continue - -Returns: pointer to the first significant opcode -*/ - -static const uschar* -first_significant_code(const uschar *code, int *options, int optbit, - BOOL optstop) -{ -for (;;) - { - switch ((int)*code) - { - case OP_OPT: - if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit)) - { - if (optstop) return code; - *options = (int)code[1]; - } - code += 2; - break; - - case OP_CREF: - case OP_BRANUMBER: - code += 3; - break; - - case OP_WORD_BOUNDARY: - case OP_NOT_WORD_BOUNDARY: - code++; - break; - - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - do code += (code[1] << 8) + code[2]; while (*code == OP_ALT); - code += 3; - break; - - default: - return code; - } - } -/* Control never reaches here */ -} - - - - -/************************************************* -* Check for anchored expression * -*************************************************/ - -/* Try to find out if this is an anchored regular expression. Consider each -alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket -all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then -it's anchored. However, if this is a multiline pattern, then only OP_SOD -counts, since OP_CIRC can match in the middle. - -A branch is also implicitly anchored if it starts with .* and DOTALL is set, -because that will try the rest of the pattern at all possible matching points, -so there is no point trying them again. - -Arguments: - code points to start of expression (the bracket) - options points to the options setting - -Returns: TRUE or FALSE -*/ - -static BOOL -is_anchored(register const uschar *code, int *options) -{ -do { - const uschar *scode = first_significant_code(code + 3, options, - PCRE_MULTILINE, FALSE); - register int op = *scode; - if (op >= OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND) - { if (!is_anchored(scode, options)) return FALSE; } - else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR) && - (*options & PCRE_DOTALL) != 0) - { if (scode[1] != OP_ANY) return FALSE; } - else if (op != OP_SOD && - ((*options & PCRE_MULTILINE) != 0 || op != OP_CIRC)) - return FALSE; - code += (code[1] << 8) + code[2]; - } -while (*code == OP_ALT); -return TRUE; -} - - - -/************************************************* -* Check for starting with ^ or .* * -*************************************************/ - -/* This is called to find out if every branch starts with ^ or .* so that -"first char" processing can be done to speed things up in multiline -matching and for non-DOTALL patterns that start with .* (which must start at -the beginning or after \n). - -Argument: points to start of expression (the bracket) -Returns: TRUE or FALSE -*/ - -static BOOL -is_startline(const uschar *code) -{ -do { - const uschar *scode = first_significant_code(code + 3, NULL, 0, FALSE); - register int op = *scode; - if (op >= OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND) - { if (!is_startline(scode)) return FALSE; } - else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR) - { if (scode[1] != OP_ANY) return FALSE; } - else if (op != OP_CIRC) return FALSE; - code += (code[1] << 8) + code[2]; - } -while (*code == OP_ALT); -return TRUE; -} - - - -/************************************************* -* Check for fixed first char * -*************************************************/ - -/* Try to find out if there is a fixed first character. This is called for -unanchored expressions, as it speeds up their processing quite considerably. -Consider each alternative branch. If they all start with the same char, or with -a bracket all of whose alternatives start with the same char (recurse ad lib), -then we return that char, otherwise -1. - -Arguments: - code points to start of expression (the bracket) - options pointer to the options (used to check casing changes) - -Returns: -1 or the fixed first char -*/ - -static int -find_firstchar(const uschar *code, int *options) -{ -register int c = -1; -do { - int d; - const uschar *scode = first_significant_code(code + 3, options, - PCRE_CASELESS, TRUE); - register int op = *scode; - - if (op >= OP_BRA) op = OP_BRA; - - switch(op) - { - default: - return -1; - - case OP_BRA: - case OP_ASSERT: - case OP_ONCE: - case OP_COND: - if ((d = find_firstchar(scode, options)) < 0) return -1; - if (c < 0) c = d; else if (c != d) return -1; - break; - - case OP_EXACT: /* Fall through */ - scode++; - - case OP_CHARS: /* Fall through */ - scode++; - - case OP_PLUS: - case OP_MINPLUS: - if (c < 0) c = scode[1]; else if (c != scode[1]) return -1; - break; - } - - code += (code[1] << 8) + code[2]; - } -while (*code == OP_ALT); -return c; -} - - - - - -/************************************************* -* Compile a Regular Expression * -*************************************************/ - -/* This function takes a string and returns a pointer to a block of store -holding a compiled version of the expression. - -Arguments: - pattern the regular expression - options various option bits - errorptr pointer to pointer to error text - erroroffset ptr offset in pattern where error was detected - tables pointer to character tables or NULL - -Returns: pointer to compiled data block, or NULL on error, - with errorptr and erroroffset set -*/ - -pcre * -pcre_compile(const char *pattern, int options, const char **errorptr, - int *erroroffset, const unsigned char *tables) -{ -real_pcre *re; -int length = 3; /* For initial BRA plus length */ -int runlength; -int c, reqchar, countlits; -int bracount = 0; -int top_backref = 0; -int branch_extra = 0; -int branch_newextra; -unsigned int brastackptr = 0; -size_t size; -uschar *code; -const uschar *ptr; -compile_data compile_block; -int brastack[BRASTACK_SIZE]; -uschar bralenstack[BRASTACK_SIZE]; - -#ifdef DEBUG -uschar *code_base, *code_end; -#endif - -/* Can't support UTF8 unless PCRE has been compiled to include the code. */ - -#ifndef SUPPORT_UTF8 -if ((options & PCRE_UTF8) != 0) - { - *errorptr = ERR32; - return NULL; - } -#endif - -/* We can't pass back an error message if errorptr is NULL; I guess the best we -can do is just return NULL. */ - -if (errorptr == NULL) return NULL; -*errorptr = NULL; - -/* However, we can give a message for this error */ - -if (erroroffset == NULL) - { - *errorptr = ERR16; - return NULL; - } -*erroroffset = 0; - -if ((options & ~PUBLIC_OPTIONS) != 0) - { - *errorptr = ERR17; - return NULL; - } - -/* Set up pointers to the individual character tables */ - -if (tables == NULL) tables = pcre_default_tables; -compile_block.lcc = tables + lcc_offset; -compile_block.fcc = tables + fcc_offset; -compile_block.cbits = tables + cbits_offset; -compile_block.ctypes = tables + ctypes_offset; - -/* Reflect pattern for debugging output */ - -DPRINTF(("------------------------------------------------------------------\n")); -DPRINTF(("%s\n", pattern)); - -/* The first thing to do is to make a pass over the pattern to compute the -amount of store required to hold the compiled code. This does not have to be -perfect as long as errors are overestimates. At the same time we can detect any -internal flag settings. Make an attempt to correct for any counted white space -if an "extended" flag setting appears late in the pattern. We can't be so -clever for #-comments. */ - -ptr = (const uschar *)(pattern - 1); -while ((c = *(++ptr)) != 0) - { - int min, max; - int class_charcount; - int bracket_length; - - if ((options & PCRE_EXTENDED) != 0) - { - if ((compile_block.ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != NEWLINE) ; - continue; - } - } - - switch(c) - { - /* A backslashed item may be an escaped "normal" character or a - character type. For a "normal" character, put the pointers and - character back so that tests for whitespace etc. in the input - are done correctly. */ - - case '\\': - { - const uschar *save_ptr = ptr; - c = check_escape(&ptr, errorptr, bracount, options, FALSE, &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if (c >= 0) - { - ptr = save_ptr; - c = '\\'; - goto NORMAL_CHAR; - } - } - length++; - - /* A back reference needs an additional 2 bytes, plus either one or 5 - bytes for a repeat. We also need to keep the value of the highest - back reference. */ - - if (c <= -ESC_REF) - { - int refnum = -c - ESC_REF; - if (refnum > top_backref) top_backref = refnum; - length += 2; /* For single back reference */ - if (ptr[1] == '{' && is_counted_repeat(ptr+2, &compile_block)) - { - ptr = read_repeat_counts(ptr+2, &min, &max, errorptr, &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - else length += 5; - if (ptr[1] == '?') ptr++; - } - } - continue; - - case '^': - case '.': - case '$': - case '*': /* These repeats won't be after brackets; */ - case '+': /* those are handled separately */ - case '?': - length++; - continue; - - /* This covers the cases of repeats after a single char, metachar, class, - or back reference. */ - - case '{': - if (!is_counted_repeat(ptr+1, &compile_block)) goto NORMAL_CHAR; - ptr = read_repeat_counts(ptr+1, &min, &max, errorptr, &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - else - { - length--; /* Uncount the original char or metachar */ - if (min == 1) length++; else if (min > 0) length += 4; - if (max > 0) length += 4; else length += 2; - } - if (ptr[1] == '?') ptr++; - continue; - - /* An alternation contains an offset to the next branch or ket. If any ims - options changed in the previous branch(es), and/or if we are in a - lookbehind assertion, extra space will be needed at the start of the - branch. This is handled by branch_extra. */ - - case '|': - length += 3 + branch_extra; - continue; - - /* A character class uses 33 characters. Don't worry about character types - that aren't allowed in classes - they'll get picked up during the compile. - A character class that contains only one character uses 2 or 3 bytes, - depending on whether it is negated or not. Notice this where we can. */ - - case '[': - class_charcount = 0; - if (*(++ptr) == '^') ptr++; - do - { - if (*ptr == '\\') - { - int ch = check_escape(&ptr, errorptr, bracount, options, TRUE, - &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if (-ch == ESC_b) class_charcount++; else class_charcount = 10; - } - else class_charcount++; - ptr++; - } - while (*ptr != 0 && *ptr != ']'); - - /* Repeats for negated single chars are handled by the general code */ - - if (class_charcount == 1) length += 3; else - { - length += 33; - - /* A repeat needs either 1 or 5 bytes. */ - - if (*ptr != 0 && ptr[1] == '{' && is_counted_repeat(ptr+2, &compile_block)) - { - ptr = read_repeat_counts(ptr+2, &min, &max, errorptr, &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - else length += 5; - if (ptr[1] == '?') ptr++; - } - } - continue; - - /* Brackets may be genuine groups or special things */ - - case '(': - branch_newextra = 0; - bracket_length = 3; - - /* Handle special forms of bracket, which all start (? */ - - if (ptr[1] == '?') - { - int set, unset; - int *optset; - - switch (c = ptr[2]) - { - /* Skip over comments entirely */ - case '#': - ptr += 3; - while (*ptr != 0 && *ptr != ')') ptr++; - if (*ptr == 0) - { - *errorptr = ERR18; - goto PCRE_ERROR_RETURN; - } - continue; - - /* Non-referencing groups and lookaheads just move the pointer on, and - then behave like a non-special bracket, except that they don't increment - the count of extracting brackets. Ditto for the "once only" bracket, - which is in Perl from version 5.005. */ - - case ':': - case '=': - case '!': - case '>': - ptr += 2; - break; - - /* A recursive call to the regex is an extension, to provide the - facility which can be obtained by $(?p{perl-code}) in Perl 5.6. */ - - case 'R': - if (ptr[3] != ')') - { - *errorptr = ERR29; - goto PCRE_ERROR_RETURN; - } - ptr += 3; - length += 1; - break; - - /* Lookbehinds are in Perl from version 5.005 */ - - case '<': - if (ptr[3] == '=' || ptr[3] == '!') - { - ptr += 3; - branch_newextra = 3; - length += 3; /* For the first branch */ - break; - } - *errorptr = ERR24; - goto PCRE_ERROR_RETURN; - - /* Conditionals are in Perl from version 5.005. The bracket must either - be followed by a number (for bracket reference) or by an assertion - group. */ - - case '(': - if ((compile_block.ctypes[ptr[3]] & ctype_digit) != 0) - { - ptr += 4; - length += 3; - while ((compile_block.ctypes[*ptr] & ctype_digit) != 0) ptr++; - if (*ptr != ')') - { - *errorptr = ERR26; - goto PCRE_ERROR_RETURN; - } - } - else /* An assertion must follow */ - { - ptr++; /* Can treat like ':' as far as spacing is concerned */ - if (ptr[2] != '?' || - (ptr[3] != '=' && ptr[3] != '!' && ptr[3] != '<') ) - { - ptr += 2; /* To get right offset in message */ - *errorptr = ERR28; - goto PCRE_ERROR_RETURN; - } - } - break; - - /* Else loop checking valid options until ) is met. Anything else is an - error. If we are without any brackets, i.e. at top level, the settings - act as if specified in the options, so massage the options immediately. - This is for backward compatibility with Perl 5.004. */ - - default: - set = unset = 0; - optset = &set; - ptr += 2; - - for (;; ptr++) - { - c = *ptr; - switch (c) - { - case 'i': - *optset |= PCRE_CASELESS; - continue; - - case 'm': - *optset |= PCRE_MULTILINE; - continue; - - case 's': - *optset |= PCRE_DOTALL; - continue; - - case 'x': - *optset |= PCRE_EXTENDED; - continue; - - case 'X': - *optset |= PCRE_EXTRA; - continue; - - case 'U': - *optset |= PCRE_UNGREEDY; - continue; - - case '-': - optset = &unset; - continue; - - /* A termination by ')' indicates an options-setting-only item; - this is global at top level; otherwise nothing is done here and - it is handled during the compiling process on a per-bracket-group - basis. */ - - case ')': - if (brastackptr == 0) - { - options = (options | set) & (~unset); - set = unset = 0; /* To save length */ - } - /* Fall through */ - - /* A termination by ':' indicates the start of a nested group with - the given options set. This is again handled at compile time, but - we must allow for compiled space if any of the ims options are - set. We also have to allow for resetting space at the end of - the group, which is why 4 is added to the length and not just 2. - If there are several changes of options within the same group, this - will lead to an over-estimate on the length, but this shouldn't - matter very much. We also have to allow for resetting options at - the start of any alternations, which we do by setting - branch_newextra to 2. Finally, we record whether the case-dependent - flag ever changes within the regex. This is used by the "required - character" code. */ - - case ':': - if (((set|unset) & PCRE_IMS) != 0) - { - length += 4; - branch_newextra = 2; - if (((set|unset) & PCRE_CASELESS) != 0) options |= PCRE_ICHANGED; - } - goto END_OPTIONS; - - /* Unrecognized option character */ - - default: - *errorptr = ERR12; - goto PCRE_ERROR_RETURN; - } - } - - /* If we hit a closing bracket, that's it - this is a freestanding - option-setting. We need to ensure that branch_extra is updated if - necessary. The only values branch_newextra can have here are 0 or 2. - If the value is 2, then branch_extra must either be 2 or 5, depending - on whether this is a lookbehind group or not. */ - - END_OPTIONS: - if (c == ')') - { - if (branch_newextra == 2 && (branch_extra == 0 || branch_extra == 3)) - branch_extra += branch_newextra; - continue; - } - - /* If options were terminated by ':' control comes here. Fall through - to handle the group below. */ - } - } - - /* Extracting brackets must be counted so we can process escapes in a - Perlish way. If the number exceeds EXTRACT_BASIC_MAX we are going to - need an additional 3 bytes of store per extracting bracket. */ - - else - { - bracount++; - if (bracount > EXTRACT_BASIC_MAX) bracket_length += 3; - } - - /* Save length for computing whole length at end if there's a repeat that - requires duplication of the group. Also save the current value of - branch_extra, and start the new group with the new value. If non-zero, this - will either be 2 for a (?imsx: group, or 3 for a lookbehind assertion. */ - - if (brastackptr >= sizeof(brastack)/sizeof(int)) - { - *errorptr = ERR19; - goto PCRE_ERROR_RETURN; - } - - bralenstack[brastackptr] = branch_extra; - branch_extra = branch_newextra; - - brastack[brastackptr++] = length; - length += bracket_length; - continue; - - /* Handle ket. Look for subsequent max/min; for certain sets of values we - have to replicate this bracket up to that many times. If brastackptr is - 0 this is an unmatched bracket which will generate an error, but take care - not to try to access brastack[-1] when computing the length and restoring - the branch_extra value. */ - - case ')': - length += 3; - { - int minval = 1; - int maxval = 1; - int duplength; - - if (brastackptr > 0) - { - duplength = length - brastack[--brastackptr]; - branch_extra = bralenstack[brastackptr]; - } - else duplength = 0; - - /* Leave ptr at the final char; for read_repeat_counts this happens - automatically; for the others we need an increment. */ - - if ((c = ptr[1]) == '{' && is_counted_repeat(ptr+2, &compile_block)) - { - ptr = read_repeat_counts(ptr+2, &minval, &maxval, errorptr, - &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - } - else if (c == '*') { minval = 0; maxval = -1; ptr++; } - else if (c == '+') { maxval = -1; ptr++; } - else if (c == '?') { minval = 0; ptr++; } - - /* If the minimum is zero, we have to allow for an OP_BRAZERO before the - group, and if the maximum is greater than zero, we have to replicate - maxval-1 times; each replication acquires an OP_BRAZERO plus a nesting - bracket set - hence the 7. */ - - if (minval == 0) - { - length++; - if (maxval > 0) length += (maxval - 1) * (duplength + 7); - } - - /* When the minimum is greater than zero, 1 we have to replicate up to - minval-1 times, with no additions required in the copies. Then, if - there is a limited maximum we have to replicate up to maxval-1 times - allowing for a BRAZERO item before each optional copy and nesting - brackets for all but one of the optional copies. */ - - else - { - length += (minval - 1) * duplength; - if (maxval > minval) /* Need this test as maxval=-1 means no limit */ - length += (maxval - minval) * (duplength + 7) - 6; - } - } - continue; - - /* Non-special character. For a run of such characters the length required - is the number of characters + 2, except that the maximum run length is 255. - We won't get a skipped space or a non-data escape or the start of a # - comment as the first character, so the length can't be zero. */ - - NORMAL_CHAR: - default: - length += 2; - runlength = 0; - do - { - if ((options & PCRE_EXTENDED) != 0) - { - if ((compile_block.ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != NEWLINE) ; - continue; - } - } - - /* Backslash may introduce a data char or a metacharacter; stop the - string before the latter. */ - - if (c == '\\') - { - const uschar *saveptr = ptr; - c = check_escape(&ptr, errorptr, bracount, options, FALSE, - &compile_block); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if (c < 0) { ptr = saveptr; break; } - -#ifdef SUPPORT_UTF8 - if (c > 127 && (options & PCRE_UTF8) != 0) - { - int i; - for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++) - if (c <= utf8_table1[i]) break; - runlength += i; - } -#endif - } - - /* Ordinary character or single-char escape */ - - runlength++; - } - - /* This "while" is the end of the "do" above. */ - - while (runlength < MAXLIT && - (compile_block.ctypes[c = *(++ptr)] & ctype_meta) == 0); - - ptr--; - length += runlength; - continue; - } - } - -length += 4; /* For final KET and END */ - -if (length > 65539) - { - *errorptr = ERR20; - return NULL; - } - -/* Compute the size of data block needed and get it, either from malloc or -externally provided function. We specify "code[0]" in the offsetof() expression -rather than just "code", because it has been reported that one broken compiler -fails on "code" because it is also an independent variable. It should make no -difference to the value of the offsetof(). */ - -size = length + offsetof(real_pcre, code[0]); -re = (real_pcre *)(pcre_malloc)(size); - -if (re == NULL) - { - *errorptr = ERR21; - return NULL; - } - -/* size of re is sloppily computed, memset to get consistent output */ -memset(re, 0, size); - -/* Put in the magic number, and save the size, options, and table pointer */ - -re->magic_number = MAGIC_NUMBER; -re->size = size; -re->options = options; -re->tables = tables; - -/* Set up a starting, non-extracting bracket, then compile the expression. On -error, *errorptr will be set non-NULL, so we don't need to look at the result -of the function here. */ - -ptr = (const uschar *)pattern; -code = re->code; -*code = OP_BRA; -bracount = 0; -(void)compile_regex(options, -1, &bracount, &code, &ptr, errorptr, FALSE, 0, - &reqchar, &countlits, &compile_block); -re->top_bracket = bracount; -re->top_backref = top_backref; - -/* If not reached end of pattern on success, there's an excess bracket. */ - -if (*errorptr == NULL && *ptr != 0) *errorptr = ERR22; - -/* Fill in the terminating state and check for disastrous overflow, but -if debugging, leave the test till after things are printed out. */ - -*code++ = OP_END; - -#ifndef DEBUG -if (code - re->code > length) *errorptr = ERR23; -#endif - -/* Give an error if there's back reference to a non-existent capturing -subpattern. */ - -if (top_backref > re->top_bracket) *errorptr = ERR15; - -/* Failed to compile */ - -if (*errorptr != NULL) - { - (pcre_free)(re); - PCRE_ERROR_RETURN: - *erroroffset = ptr - (const uschar *)pattern; - return NULL; - } - -/* If the anchored option was not passed, set flag if we can determine that the -pattern is anchored by virtue of ^ characters or \A or anything else (such as -starting with .* when DOTALL is set). - -Otherwise, see if we can determine what the first character has to be, because -that speeds up unanchored matches no end. If not, see if we can set the -PCRE_STARTLINE flag. This is helpful for multiline matches when all branches -start with ^. and also when all branches start with .* for non-DOTALL matches. -*/ - -if ((options & PCRE_ANCHORED) == 0) - { - int temp_options = options; - if (is_anchored(re->code, &temp_options)) - re->options |= PCRE_ANCHORED; - else - { - int ch = find_firstchar(re->code, &temp_options); - if (ch >= 0) - { - re->first_char = ch; - re->options |= PCRE_FIRSTSET; - } - else if (is_startline(re->code)) - re->options |= PCRE_STARTLINE; - } - } - -/* Save the last required character if there are at least two literal -characters on all paths, or if there is no first character setting. */ - -if (reqchar >= 0 && (countlits > 1 || (re->options & PCRE_FIRSTSET) == 0)) - { - re->req_char = reqchar; - re->options |= PCRE_REQCHSET; - } - -/* Print out the compiled data for debugging */ - -#ifdef DEBUG - -printf("Length = %d top_bracket = %d top_backref = %d\n", - length, re->top_bracket, re->top_backref); - -if (re->options != 0) - { - printf("%s%s%s%s%s%s%s%s%s\n", - ((re->options & PCRE_ANCHORED) != 0)? "anchored " : "", - ((re->options & PCRE_CASELESS) != 0)? "caseless " : "", - ((re->options & PCRE_ICHANGED) != 0)? "case state changed " : "", - ((re->options & PCRE_EXTENDED) != 0)? "extended " : "", - ((re->options & PCRE_MULTILINE) != 0)? "multiline " : "", - ((re->options & PCRE_DOTALL) != 0)? "dotall " : "", - ((re->options & PCRE_DOLLAR_ENDONLY) != 0)? "endonly " : "", - ((re->options & PCRE_EXTRA) != 0)? "extra " : "", - ((re->options & PCRE_UNGREEDY) != 0)? "ungreedy " : ""); - } - -if ((re->options & PCRE_FIRSTSET) != 0) - { - if (isprint(re->first_char)) printf("First char = %c\n", re->first_char); - else printf("First char = \\x%02x\n", re->first_char); - } - -if ((re->options & PCRE_REQCHSET) != 0) - { - if (isprint(re->req_char)) printf("Req char = %c\n", re->req_char); - else printf("Req char = \\x%02x\n", re->req_char); - } - -code_end = code; -code_base = code = re->code; - -while (code < code_end) - { - int charlength; - - printf("%3d ", code - code_base); - - if (*code >= OP_BRA) - { - if (*code - OP_BRA > EXTRACT_BASIC_MAX) - printf("%3d Bra extra", (code[1] << 8) + code[2]); - else - printf("%3d Bra %d", (code[1] << 8) + code[2], *code - OP_BRA); - code += 2; - } - - else switch(*code) - { - case OP_OPT: - printf(" %.2x %s", code[1], OP_names[*code]); - code++; - break; - - case OP_CHARS: - charlength = *(++code); - printf("%3d ", charlength); - while (charlength-- > 0) - if (isprint(c = *(++code))) printf("%c", c); else printf("\\x%02x", c); - break; - - case OP_KETRMAX: - case OP_KETRMIN: - case OP_ALT: - case OP_KET: - case OP_ASSERT: - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - case OP_ONCE: - case OP_REVERSE: - case OP_BRANUMBER: - case OP_COND: - case OP_CREF: - printf("%3d %s", (code[1] << 8) + code[2], OP_names[*code]); - code += 2; - break; - - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - case OP_TYPESTAR: - case OP_TYPEMINSTAR: - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - case OP_TYPEQUERY: - case OP_TYPEMINQUERY: - if (*code >= OP_TYPESTAR) - printf(" %s", OP_names[code[1]]); - else if (isprint(c = code[1])) printf(" %c", c); - else printf(" \\x%02x", c); - printf("%s", OP_names[*code++]); - break; - - case OP_EXACT: - case OP_UPTO: - case OP_MINUPTO: - if (isprint(c = code[3])) printf(" %c{", c); - else printf(" \\x%02x{", c); - if (*code != OP_EXACT) printf("0,"); - printf("%d}", (code[1] << 8) + code[2]); - if (*code == OP_MINUPTO) printf("?"); - code += 3; - break; - - case OP_TYPEEXACT: - case OP_TYPEUPTO: - case OP_TYPEMINUPTO: - printf(" %s{", OP_names[code[3]]); - if (*code != OP_TYPEEXACT) printf(","); - printf("%d}", (code[1] << 8) + code[2]); - if (*code == OP_TYPEMINUPTO) printf("?"); - code += 3; - break; - - case OP_NOT: - if (isprint(c = *(++code))) printf(" [^%c]", c); - else printf(" [^\\x%02x]", c); - break; - - case OP_NOTSTAR: - case OP_NOTMINSTAR: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTQUERY: - case OP_NOTMINQUERY: - if (isprint(c = code[1])) printf(" [^%c]", c); - else printf(" [^\\x%02x]", c); - printf("%s", OP_names[*code++]); - break; - - case OP_NOTEXACT: - case OP_NOTUPTO: - case OP_NOTMINUPTO: - if (isprint(c = code[3])) printf(" [^%c]{", c); - else printf(" [^\\x%02x]{", c); - if (*code != OP_NOTEXACT) printf(","); - printf("%d}", (code[1] << 8) + code[2]); - if (*code == OP_NOTMINUPTO) printf("?"); - code += 3; - break; - - case OP_REF: - printf(" \\%d", (code[1] << 8) | code[2]); - code += 3; - goto CLASS_REF_REPEAT; - - case OP_CLASS: - { - int i, min, max; - code++; - printf(" ["); - - for (i = 0; i < 256; i++) - { - if ((code[i/8] & (1 << (i&7))) != 0) - { - int j; - for (j = i+1; j < 256; j++) - if ((code[j/8] & (1 << (j&7))) == 0) break; - if (i == '-' || i == ']') printf("\\"); - if (isprint(i)) printf("%c", i); else printf("\\x%02x", i); - if (--j > i) - { - printf("-"); - if (j == '-' || j == ']') printf("\\"); - if (isprint(j)) printf("%c", j); else printf("\\x%02x", j); - } - i = j; - } - } - printf("]"); - code += 32; - - CLASS_REF_REPEAT: - - switch(*code) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - printf("%s", OP_names[*code]); - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - min = (code[1] << 8) + code[2]; - max = (code[3] << 8) + code[4]; - if (max == 0) printf("{%d,}", min); - else printf("{%d,%d}", min, max); - if (*code == OP_CRMINRANGE) printf("?"); - code += 4; - break; - - default: - code--; - } - } - break; - - /* Anything else is just a one-node item */ - - default: - printf(" %s", OP_names[*code]); - break; - } - - code++; - printf("\n"); - } -printf("------------------------------------------------------------------\n"); - -/* This check is done here in the debugging case so that the code that -was compiled can be seen. */ - -if (code - re->code > length) - { - *errorptr = ERR23; - (pcre_free)(re); - *erroroffset = ptr - (uschar *)pattern; - return NULL; - } -#endif - -return (pcre *)re; -} - - - -/************************************************* -* Match a back-reference * -*************************************************/ - -/* If a back reference hasn't been set, the length that is passed is greater -than the number of characters left in the string, so the match fails. - -Arguments: - offset index into the offset vector - eptr points into the subject - length length to be matched - md points to match data block - ims the ims flags - -Returns: TRUE if matched -*/ - -static BOOL -match_ref(int offset, register const uschar *eptr, int length, match_data *md, - unsigned long int ims) -{ -const uschar *p = md->start_subject + md->offset_vector[offset]; - -#ifdef DEBUG -if (eptr >= md->end_subject) - printf("matching subject "); -else - { - printf("matching subject "); - pchars(eptr, length, TRUE, md); - } -printf(" against backref "); -pchars(p, length, FALSE, md); -printf("\n"); -#endif - -/* Always fail if not enough characters left */ - -if (length > md->end_subject - eptr) return FALSE; - -/* Separate the caselesss case for speed */ - -if ((ims & PCRE_CASELESS) != 0) - { - while (length-- > 0) - if (md->lcc[*p++] != md->lcc[*eptr++]) return FALSE; - } -else - { while (length-- > 0) if (*p++ != *eptr++) return FALSE; } - -return TRUE; -} - - - -/************************************************* -* Match from current position * -*************************************************/ - -/* On entry ecode points to the first opcode, and eptr to the first character -in the subject string, while eptrb holds the value of eptr at the start of the -last bracketed group - used for breaking infinite loops matching zero-length -strings. - -Arguments: - eptr pointer in subject - ecode position in code - offset_top current top pointer - md pointer to "static" info for the match - ims current /i, /m, and /s options - eptrb pointer to chain of blocks containing eptr at start of - brackets - for testing for empty matches - flags can contain - match_condassert - this is an assertion condition - match_isgroup - this is the start of a bracketed group - -Returns: TRUE if matched -*/ - -static BOOL -match(register const uschar *eptr, register const uschar *ecode, - int offset_top, match_data *md, unsigned long int ims, eptrblock *eptrb, - int flags) -{ -unsigned long int original_ims = ims; /* Save for resetting on ')' */ -eptrblock newptrb; - -/* At the start of a bracketed group, add the current subject pointer to the -stack of such pointers, to be re-instated at the end of the group when we hit -the closing ket. When match() is called in other circumstances, we don't add to -the stack. */ - -if ((flags & match_isgroup) != 0) - { - newptrb.prev = eptrb; - newptrb.saved_eptr = eptr; - eptrb = &newptrb; - } - -/* Now start processing the operations. */ - -for (;;) - { - int op = (int)*ecode; - int min, max, ctype; - register int i; - register int c; - BOOL minimize = FALSE; - - /* Opening capturing bracket. If there is space in the offset vector, save - the current subject position in the working slot at the top of the vector. We - mustn't change the current values of the data slot, because they may be set - from a previous iteration of this group, and be referred to by a reference - inside the group. - - If the bracket fails to match, we need to restore this value and also the - values of the final offsets, in case they were set by a previous iteration of - the same bracket. - - If there isn't enough space in the offset vector, treat this as if it were a - non-capturing bracket. Don't worry about setting the flag for the error case - here; that is handled in the code for KET. */ - - if (op > OP_BRA) - { - int offset; - int number = op - OP_BRA; - - /* For extended extraction brackets (large number), we have to fish out the - number from a dummy opcode at the start. */ - - if (number > EXTRACT_BASIC_MAX) number = (ecode[4] << 8) | ecode[5]; - offset = number << 1; - -#ifdef DEBUG - printf("start bracket %d subject=", number); - pchars(eptr, 16, TRUE, md); - printf("\n"); -#endif - - if (offset < md->offset_max) - { - int save_offset1 = md->offset_vector[offset]; - int save_offset2 = md->offset_vector[offset+1]; - int save_offset3 = md->offset_vector[md->offset_end - number]; - - DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3)); - md->offset_vector[md->offset_end - number] = eptr - md->start_subject; - - do - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - - DPRINTF(("bracket %d failed\n", number)); - - md->offset_vector[offset] = save_offset1; - md->offset_vector[offset+1] = save_offset2; - md->offset_vector[md->offset_end - number] = save_offset3; - - return FALSE; - } - - /* Insufficient room for saving captured contents */ - - else op = OP_BRA; - } - - /* Other types of node can be handled by a switch */ - - switch(op) - { - case OP_BRA: /* Non-capturing bracket: optimized */ - DPRINTF(("start bracket 0\n")); - do - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - DPRINTF(("bracket 0 failed\n")); - return FALSE; - - /* Conditional group: compilation checked that there are no more than - two branches. If the condition is false, skipping the first branch takes us - past the end if there is only one branch, but that's OK because that is - exactly what going to the ket would do. */ - - case OP_COND: - if (ecode[3] == OP_CREF) /* Condition is extraction test */ - { - int offset = (ecode[4] << 9) | (ecode[5] << 1); /* Doubled ref number */ - return match(eptr, - ecode + ((offset < offset_top && md->offset_vector[offset] >= 0)? - 6 : 3 + (ecode[1] << 8) + ecode[2]), - offset_top, md, ims, eptrb, match_isgroup); - } - - /* The condition is an assertion. Call match() to evaluate it - setting - the final argument TRUE causes it to stop at the end of an assertion. */ - - else - { - if (match(eptr, ecode+3, offset_top, md, ims, NULL, - match_condassert | match_isgroup)) - { - ecode += 3 + (ecode[4] << 8) + ecode[5]; - while (*ecode == OP_ALT) ecode += (ecode[1] << 8) + ecode[2]; - } - else ecode += (ecode[1] << 8) + ecode[2]; - return match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup); - } - /* Control never reaches here */ - - /* Skip over conditional reference or large extraction number data if - encountered. */ - - case OP_CREF: - case OP_BRANUMBER: - ecode += 3; - break; - - /* End of the pattern. If PCRE_NOTEMPTY is set, fail if we have matched - an empty string - recursion will then try other alternatives, if any. */ - - case OP_END: - if (md->notempty && eptr == md->start_match) return FALSE; - md->end_match_ptr = eptr; /* Record where we ended */ - md->end_offset_top = offset_top; /* and how many extracts were taken */ - return TRUE; - - /* Change option settings */ - - case OP_OPT: - ims = ecode[1]; - ecode += 2; - DPRINTF(("ims set to %02lx\n", ims)); - break; - - /* Assertion brackets. Check the alternative branches in turn - the - matching won't pass the KET for an assertion. If any one branch matches, - the assertion is true. Lookbehind assertions have an OP_REVERSE item at the - start of each branch to move the current point backwards, so the code at - this level is identical to the lookahead case. */ - - case OP_ASSERT: - case OP_ASSERTBACK: - do - { - if (match(eptr, ecode+3, offset_top, md, ims, NULL, match_isgroup)) break; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - if (*ecode == OP_KET) return FALSE; - - /* If checking an assertion for a condition, return TRUE. */ - - if ((flags & match_condassert) != 0) return TRUE; - - /* Continue from after the assertion, updating the offsets high water - mark, since extracts may have been taken during the assertion. */ - - do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT); - ecode += 3; - offset_top = md->end_offset_top; - continue; - - /* Negative assertion: all branches must fail to match */ - - case OP_ASSERT_NOT: - case OP_ASSERTBACK_NOT: - do - { - if (match(eptr, ecode+3, offset_top, md, ims, NULL, match_isgroup)) - return FALSE; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - - if ((flags & match_condassert) != 0) return TRUE; - - ecode += 3; - continue; - - /* Move the subject pointer back. This occurs only at the start of - each branch of a lookbehind assertion. If we are too close to the start to - move back, this match function fails. When working with UTF-8 we move - back a number of characters, not bytes. */ - - case OP_REVERSE: -#ifdef SUPPORT_UTF8 - c = (ecode[1] << 8) + ecode[2]; - for (i = 0; i < c; i++) - { - eptr--; - BACKCHAR(eptr) - } -#else - eptr -= (ecode[1] << 8) + ecode[2]; -#endif - - if (eptr < md->start_subject) return FALSE; - ecode += 3; - break; - - /* Recursion matches the current regex, nested. If there are any capturing - brackets started but not finished, we have to save their starting points - and reinstate them after the recursion. However, we don't know how many - such there are (offset_top records the completed total) so we just have - to save all the potential data. There may be up to 99 such values, which - is a bit large to put on the stack, but using malloc for small numbers - seems expensive. As a compromise, the stack is used when there are fewer - than 16 values to store; otherwise malloc is used. A problem is what to do - if the malloc fails ... there is no way of returning to the top level with - an error. Save the top 15 values on the stack, and accept that the rest - may be wrong. */ - - case OP_RECURSE: - { - BOOL rc; - int *save; - int stacksave[15]; - - c = md->offset_max; - - if (c < 16) save = stacksave; else - { - save = (int *)(pcre_malloc)((c+1) * sizeof(int)); - if (save == NULL) - { - save = stacksave; - c = 15; - } - } - - for (i = 1; i <= c; i++) - save[i] = md->offset_vector[md->offset_end - i]; - rc = match(eptr, md->start_pattern, offset_top, md, ims, eptrb, - match_isgroup); - for (i = 1; i <= c; i++) - md->offset_vector[md->offset_end - i] = save[i]; - if (save != stacksave) (pcre_free)(save); - if (!rc) return FALSE; - - /* In case the recursion has set more capturing values, save the final - number, then move along the subject till after the recursive match, - and advance one byte in the pattern code. */ - - offset_top = md->end_offset_top; - eptr = md->end_match_ptr; - ecode++; - } - break; - - /* "Once" brackets are like assertion brackets except that after a match, - the point in the subject string is not moved back. Thus there can never be - a move back into the brackets. Check the alternative branches in turn - the - matching won't pass the KET for this kind of subpattern. If any one branch - matches, we carry on as at the end of a normal bracket, leaving the subject - pointer. */ - - case OP_ONCE: - { - const uschar *prev = ecode; - const uschar *saved_eptr = eptr; - - do - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, match_isgroup)) - break; - ecode += (ecode[1] << 8) + ecode[2]; - } - while (*ecode == OP_ALT); - - /* If hit the end of the group (which could be repeated), fail */ - - if (*ecode != OP_ONCE && *ecode != OP_ALT) return FALSE; - - /* Continue as from after the assertion, updating the offsets high water - mark, since extracts may have been taken. */ - - do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT); - - offset_top = md->end_offset_top; - eptr = md->end_match_ptr; - - /* For a non-repeating ket, just continue at this level. This also - happens for a repeating ket if no characters were matched in the group. - This is the forcible breaking of infinite loops as implemented in Perl - 5.005. If there is an options reset, it will get obeyed in the normal - course of events. */ - - if (*ecode == OP_KET || eptr == saved_eptr) - { - ecode += 3; - break; - } - - /* The repeating kets try the rest of the pattern or restart from the - preceding bracket, in the appropriate order. We need to reset any options - that changed within the bracket before re-running it, so check the next - opcode. */ - - if (ecode[3] == OP_OPT) - { - ims = (ims & ~PCRE_IMS) | ecode[4]; - DPRINTF(("ims set to %02lx at group repeat\n", ims)); - } - - if (*ecode == OP_KETRMIN) - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, 0) || - match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - } - else /* OP_KETRMAX */ - { - if (match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup) || - match(eptr, ecode+3, offset_top, md, ims, eptrb, 0)) return TRUE; - } - } - return FALSE; - - /* An alternation is the end of a branch; scan along to find the end of the - bracketed group and go to there. */ - - case OP_ALT: - do ecode += (ecode[1] << 8) + ecode[2]; while (*ecode == OP_ALT); - break; - - /* BRAZERO and BRAMINZERO occur just before a bracket group, indicating - that it may occur zero times. It may repeat infinitely, or not at all - - i.e. it could be ()* or ()? in the pattern. Brackets with fixed upper - repeat limits are compiled as a number of copies, with the optional ones - preceded by BRAZERO or BRAMINZERO. */ - - case OP_BRAZERO: - { - const uschar *next = ecode+1; - if (match(eptr, next, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - do next += (next[1] << 8) + next[2]; while (*next == OP_ALT); - ecode = next + 3; - } - break; - - case OP_BRAMINZERO: - { - const uschar *next = ecode+1; - do next += (next[1] << 8) + next[2]; while (*next == OP_ALT); - if (match(eptr, next+3, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - ecode++; - } - break; - - /* End of a group, repeated or non-repeating. If we are at the end of - an assertion "group", stop matching and return TRUE, but record the - current high water mark for use by positive assertions. Do this also - for the "once" (not-backup up) groups. */ - - case OP_KET: - case OP_KETRMIN: - case OP_KETRMAX: - { - const uschar *prev = ecode - (ecode[1] << 8) - ecode[2]; - const uschar *saved_eptr = eptrb->saved_eptr; - - eptrb = eptrb->prev; /* Back up the stack of bracket start pointers */ - - if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT || - *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT || - *prev == OP_ONCE) - { - md->end_match_ptr = eptr; /* For ONCE */ - md->end_offset_top = offset_top; - return TRUE; - } - - /* In all other cases except a conditional group we have to check the - group number back at the start and if necessary complete handling an - extraction by setting the offsets and bumping the high water mark. */ - - if (*prev != OP_COND) - { - int offset; - int number = *prev - OP_BRA; - - /* For extended extraction brackets (large number), we have to fish out - the number from a dummy opcode at the start. */ - - if (number > EXTRACT_BASIC_MAX) number = (prev[4] << 8) | prev[5]; - offset = number << 1; - -#ifdef DEBUG - printf("end bracket %d", number); - printf("\n"); -#endif - - if (number > 0) - { - if (offset >= md->offset_max) md->offset_overflow = TRUE; else - { - md->offset_vector[offset] = - md->offset_vector[md->offset_end - number]; - md->offset_vector[offset+1] = eptr - md->start_subject; - if (offset_top <= offset) offset_top = offset + 2; - } - } - } - - /* Reset the value of the ims flags, in case they got changed during - the group. */ - - ims = original_ims; - DPRINTF(("ims reset to %02lx\n", ims)); - - /* For a non-repeating ket, just continue at this level. This also - happens for a repeating ket if no characters were matched in the group. - This is the forcible breaking of infinite loops as implemented in Perl - 5.005. If there is an options reset, it will get obeyed in the normal - course of events. */ - - if (*ecode == OP_KET || eptr == saved_eptr) - { - ecode += 3; - break; - } - - /* The repeating kets try the rest of the pattern or restart from the - preceding bracket, in the appropriate order. */ - - if (*ecode == OP_KETRMIN) - { - if (match(eptr, ecode+3, offset_top, md, ims, eptrb, 0) || - match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup)) - return TRUE; - } - else /* OP_KETRMAX */ - { - if (match(eptr, prev, offset_top, md, ims, eptrb, match_isgroup) || - match(eptr, ecode+3, offset_top, md, ims, eptrb, 0)) return TRUE; - } - } - return FALSE; - - /* Start of subject unless notbol, or after internal newline if multiline */ - - case OP_CIRC: - if (md->notbol && eptr == md->start_subject) return FALSE; - if ((ims & PCRE_MULTILINE) != 0) - { - if (eptr != md->start_subject && eptr[-1] != NEWLINE) return FALSE; - ecode++; - break; - } - /* ... else fall through */ - - /* Start of subject assertion */ - - case OP_SOD: - if (eptr != md->start_subject) return FALSE; - ecode++; - break; - - /* Assert before internal newline if multiline, or before a terminating - newline unless endonly is set, else end of subject unless noteol is set. */ - - case OP_DOLL: - if ((ims & PCRE_MULTILINE) != 0) - { - if (eptr < md->end_subject) { if (*eptr != NEWLINE) return FALSE; } - else { if (md->noteol) return FALSE; } - ecode++; - break; - } - else - { - if (md->noteol) return FALSE; - if (!md->endonly) - { - if (eptr < md->end_subject - 1 || - (eptr == md->end_subject - 1 && *eptr != NEWLINE)) return FALSE; - - ecode++; - break; - } - } - /* ... else fall through */ - - /* End of subject assertion (\z) */ - - case OP_EOD: - if (eptr < md->end_subject) return FALSE; - ecode++; - break; - - /* End of subject or ending \n assertion (\Z) */ - - case OP_EODN: - if (eptr < md->end_subject - 1 || - (eptr == md->end_subject - 1 && *eptr != NEWLINE)) return FALSE; - ecode++; - break; - - /* Word boundary assertions */ - - case OP_NOT_WORD_BOUNDARY: - case OP_WORD_BOUNDARY: - { - BOOL prev_is_word = (eptr != md->start_subject) && - ((md->ctypes[eptr[-1]] & ctype_word) != 0); - BOOL cur_is_word = (eptr < md->end_subject) && - ((md->ctypes[*eptr] & ctype_word) != 0); - if ((*ecode++ == OP_WORD_BOUNDARY)? - cur_is_word == prev_is_word : cur_is_word != prev_is_word) - return FALSE; - } - break; - - /* Match a single character type; inline for speed */ - - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0 && eptr < md->end_subject && *eptr == NEWLINE) - return FALSE; - if (eptr++ >= md->end_subject) return FALSE; -#ifdef SUPPORT_UTF8 - if (md->utf8) - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; -#endif - ecode++; - break; - - case OP_NOT_DIGIT: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_digit) != 0) - return FALSE; - ecode++; - break; - - case OP_DIGIT: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_digit) == 0) - return FALSE; - ecode++; - break; - - case OP_NOT_WHITESPACE: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_space) != 0) - return FALSE; - ecode++; - break; - - case OP_WHITESPACE: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_space) == 0) - return FALSE; - ecode++; - break; - - case OP_NOT_WORDCHAR: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_word) != 0) - return FALSE; - ecode++; - break; - - case OP_WORDCHAR: - if (eptr >= md->end_subject || - (md->ctypes[*eptr++] & ctype_word) == 0) - return FALSE; - ecode++; - break; - - /* Match a back reference, possibly repeatedly. Look past the end of the - item to see if there is repeat information following. The code is similar - to that for character classes, but repeated for efficiency. Then obey - similar code to character type repeats - written out again for speed. - However, if the referenced string is the empty string, always treat - it as matched, any number of times (otherwise there could be infinite - loops). */ - - case OP_REF: - { - int length; - int offset = (ecode[1] << 9) | (ecode[2] << 1); /* Doubled ref number */ - ecode += 3; /* Advance past item */ - - /* If the reference is unset, set the length to be longer than the amount - of subject left; this ensures that every attempt at a match fails. We - can't just fail here, because of the possibility of quantifiers with zero - minima. */ - - length = (offset >= offset_top || md->offset_vector[offset] < 0)? - md->end_subject - eptr + 1 : - md->offset_vector[offset+1] - md->offset_vector[offset]; - - /* Set up for repetition, or handle the non-repeated case */ - - switch (*ecode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - c = *ecode++ - OP_CRSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - minimize = (*ecode == OP_CRMINRANGE); - min = (ecode[1] << 8) + ecode[2]; - max = (ecode[3] << 8) + ecode[4]; - if (max == 0) max = INT_MAX; - ecode += 5; - break; - - default: /* No repeat follows */ - if (!match_ref(offset, eptr, length, md, ims)) return FALSE; - eptr += length; - continue; /* With the main loop */ - } - - /* If the length of the reference is zero, just continue with the - main loop. */ - - if (length == 0) continue; - - /* First, ensure the minimum number of matches are present. We get back - the length of the reference string explicitly rather than passing the - address of eptr, so that eptr can be a register variable. */ - - for (i = 1; i <= min; i++) - { - if (!match_ref(offset, eptr, length, md, ims)) return FALSE; - eptr += length; - } - - /* If min = max, continue at the same level without recursion. - They are not both allowed to be zero. */ - - if (min == max) continue; - - /* If minimizing, keep trying and advancing the pointer */ - - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || !match_ref(offset, eptr, length, md, ims)) - return FALSE; - eptr += length; - } - /* Control never gets here */ - } - - /* If maximizing, find the longest string and work backwards */ - - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (!match_ref(offset, eptr, length, md, ims)) break; - eptr += length; - } - while (eptr >= pp) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - eptr -= length; - } - return FALSE; - } - } - /* Control never gets here */ - - - - /* Match a character class, possibly repeatedly. Look past the end of the - item to see if there is repeat information following. Then obey similar - code to character type repeats - written out again for speed. */ - - case OP_CLASS: - { - const uschar *data = ecode + 1; /* Save for matching */ - ecode += 33; /* Advance past the item */ - - switch (*ecode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - c = *ecode++ - OP_CRSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - minimize = (*ecode == OP_CRMINRANGE); - min = (ecode[1] << 8) + ecode[2]; - max = (ecode[3] << 8) + ecode[4]; - if (max == 0) max = INT_MAX; - ecode += 5; - break; - - default: /* No repeat follows */ - min = max = 1; - break; - } - - /* First, ensure the minimum number of matches are present. */ - - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject) return FALSE; - GETCHARINC(c, eptr) /* Get character; increment eptr */ - -#ifdef SUPPORT_UTF8 - /* We do not yet support class members > 255 */ - if (c > 255) return FALSE; -#endif - - if ((data[c/8] & (1 << (c&7))) != 0) continue; - return FALSE; - } - - /* If max == min we can continue with the main loop without the - need to recurse. */ - - if (min == max) continue; - - /* If minimizing, keep testing the rest of the expression and advancing - the pointer while it matches the class. */ - - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject) return FALSE; - GETCHARINC(c, eptr) /* Get character; increment eptr */ - -#ifdef SUPPORT_UTF8 - /* We do not yet support class members > 255 */ - if (c > 255) return FALSE; -#endif - if ((data[c/8] & (1 << (c&7))) != 0) continue; - return FALSE; - } - /* Control never gets here */ - } - - /* If maximizing, find the longest possible run, then work backwards. */ - - else - { - const uschar *pp = eptr; - int len = 1; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len) /* Get character, set length if UTF-8 */ - -#ifdef SUPPORT_UTF8 - /* We do not yet support class members > 255 */ - if (c > 255) break; -#endif - if ((data[c/8] & (1 << (c&7))) == 0) break; - eptr += len; - } - - while (eptr >= pp) - { - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - -#ifdef SUPPORT_UTF8 - BACKCHAR(eptr) -#endif - } - return FALSE; - } - } - /* Control never gets here */ - - /* Match a run of characters */ - - case OP_CHARS: - { - register int length = ecode[1]; - ecode += 2; - -#ifdef DEBUG /* Sigh. Some compilers never learn. */ - if (eptr >= md->end_subject) - printf("matching subject against pattern "); - else - { - printf("matching subject "); - pchars(eptr, length, TRUE, md); - printf(" against pattern "); - } - pchars(ecode, length, FALSE, md); - printf("\n"); -#endif - - if (length > md->end_subject - eptr) return FALSE; - if ((ims & PCRE_CASELESS) != 0) - { - while (length-- > 0) - if (md->lcc[*ecode++] != md->lcc[*eptr++]) - return FALSE; - } - else - { - while (length-- > 0) if (*ecode++ != *eptr++) return FALSE; - } - } - break; - - /* Match a single character repeatedly; different opcodes share code. */ - - case OP_EXACT: - min = max = (ecode[1] << 8) + ecode[2]; - ecode += 3; - goto REPEATCHAR; - - case OP_UPTO: - case OP_MINUPTO: - min = 0; - max = (ecode[1] << 8) + ecode[2]; - minimize = *ecode == OP_MINUPTO; - ecode += 3; - goto REPEATCHAR; - - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - c = *ecode++ - OP_STAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single-character matches. We can give - up quickly if there are fewer than the minimum number of characters left in - the subject. */ - - REPEATCHAR: - if (min > md->end_subject - eptr) return FALSE; - c = *ecode++; - - /* The code is duplicated for the caseless and caseful cases, for speed, - since matching characters is likely to be quite common. First, ensure the - minimum number of matches are present. If min = max, continue at the same - level without recursing. Otherwise, if minimizing, keep trying the rest of - the expression and advancing one matching character if failing, up to the - maximum. Alternatively, if maximizing, find the maximum number of - characters and work backwards. */ - - DPRINTF(("matching %c{%d,%d} against subject %.*s\n", c, min, max, - max, eptr)); - - if ((ims & PCRE_CASELESS) != 0) - { - c = md->lcc[c]; - for (i = 1; i <= min; i++) - if (c != md->lcc[*eptr++]) return FALSE; - if (min == max) continue; - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject || - c != md->lcc[*eptr++]) - return FALSE; - } - /* Control never gets here */ - } - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || c != md->lcc[*eptr]) break; - eptr++; - } - while (eptr >= pp) - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - return FALSE; - } - /* Control never gets here */ - } - - /* Caseful comparisons */ - - else - { - for (i = 1; i <= min; i++) if (c != *eptr++) return FALSE; - if (min == max) continue; - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject || c != *eptr++) return FALSE; - } - /* Control never gets here */ - } - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || c != *eptr) break; - eptr++; - } - while (eptr >= pp) - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - return FALSE; - } - } - /* Control never gets here */ - - /* Match a negated single character */ - - case OP_NOT: - if (eptr >= md->end_subject) return FALSE; - ecode++; - if ((ims & PCRE_CASELESS) != 0) - { - if (md->lcc[*ecode++] == md->lcc[*eptr++]) return FALSE; - } - else - { - if (*ecode++ == *eptr++) return FALSE; - } - break; - - /* Match a negated single character repeatedly. This is almost a repeat of - the code for a repeated single character, but I haven't found a nice way of - commoning these up that doesn't require a test of the positive/negative - option for each character match. Maybe that wouldn't add very much to the - time taken, but character matching *is* what this is all about... */ - - case OP_NOTEXACT: - min = max = (ecode[1] << 8) + ecode[2]; - ecode += 3; - goto REPEATNOTCHAR; - - case OP_NOTUPTO: - case OP_NOTMINUPTO: - min = 0; - max = (ecode[1] << 8) + ecode[2]; - minimize = *ecode == OP_NOTMINUPTO; - ecode += 3; - goto REPEATNOTCHAR; - - case OP_NOTSTAR: - case OP_NOTMINSTAR: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTQUERY: - case OP_NOTMINQUERY: - c = *ecode++ - OP_NOTSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single-character matches. We can give - up quickly if there are fewer than the minimum number of characters left in - the subject. */ - - REPEATNOTCHAR: - if (min > md->end_subject - eptr) return FALSE; - c = *ecode++; - - /* The code is duplicated for the caseless and caseful cases, for speed, - since matching characters is likely to be quite common. First, ensure the - minimum number of matches are present. If min = max, continue at the same - level without recursing. Otherwise, if minimizing, keep trying the rest of - the expression and advancing one matching character if failing, up to the - maximum. Alternatively, if maximizing, find the maximum number of - characters and work backwards. */ - - DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", c, min, max, - max, eptr)); - - if ((ims & PCRE_CASELESS) != 0) - { - c = md->lcc[c]; - for (i = 1; i <= min; i++) - if (c == md->lcc[*eptr++]) return FALSE; - if (min == max) continue; - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject || - c == md->lcc[*eptr++]) - return FALSE; - } - /* Control never gets here */ - } - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || c == md->lcc[*eptr]) break; - eptr++; - } - while (eptr >= pp) - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - return FALSE; - } - /* Control never gets here */ - } - - /* Caseful comparisons */ - - else - { - for (i = 1; i <= min; i++) if (c == *eptr++) return FALSE; - if (min == max) continue; - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - if (i >= max || eptr >= md->end_subject || c == *eptr++) return FALSE; - } - /* Control never gets here */ - } - else - { - const uschar *pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || c == *eptr) break; - eptr++; - } - while (eptr >= pp) - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; - return FALSE; - } - } - /* Control never gets here */ - - /* Match a single character type repeatedly; several different opcodes - share code. This is very similar to the code for single characters, but we - repeat it in the interests of efficiency. */ - - case OP_TYPEEXACT: - min = max = (ecode[1] << 8) + ecode[2]; - minimize = TRUE; - ecode += 3; - goto REPEATTYPE; - - case OP_TYPEUPTO: - case OP_TYPEMINUPTO: - min = 0; - max = (ecode[1] << 8) + ecode[2]; - minimize = *ecode == OP_TYPEMINUPTO; - ecode += 3; - goto REPEATTYPE; - - case OP_TYPESTAR: - case OP_TYPEMINSTAR: - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - case OP_TYPEQUERY: - case OP_TYPEMINQUERY: - c = *ecode++ - OP_TYPESTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single character type matches */ - - REPEATTYPE: - ctype = *ecode++; /* Code for the character type */ - - /* First, ensure the minimum number of matches are present. Use inline - code for maximizing the speed, and do the type test once at the start - (i.e. keep it out of the loop). Also we can test that there are at least - the minimum number of bytes before we start, except when doing '.' in - UTF8 mode. Leave the test in in all cases; in the special case we have - to test after each character. */ - - if (min > md->end_subject - eptr) return FALSE; - if (min > 0) switch(ctype) - { - case OP_ANY: -#ifdef SUPPORT_UTF8 - if (md->utf8) - { - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject || - (*eptr++ == NEWLINE && (ims & PCRE_DOTALL) == 0)) - return FALSE; - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - break; - } -#endif - /* Non-UTF8 can be faster */ - if ((ims & PCRE_DOTALL) == 0) - { for (i = 1; i <= min; i++) if (*eptr++ == NEWLINE) return FALSE; } - else eptr += min; - break; - - case OP_NOT_DIGIT: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_digit) != 0) return FALSE; - break; - - case OP_DIGIT: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_digit) == 0) return FALSE; - break; - - case OP_NOT_WHITESPACE: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_space) != 0) return FALSE; - break; - - case OP_WHITESPACE: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_space) == 0) return FALSE; - break; - - case OP_NOT_WORDCHAR: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_word) != 0) - return FALSE; - break; - - case OP_WORDCHAR: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_word) == 0) - return FALSE; - break; - } - - /* If min = max, continue at the same level without recursing */ - - if (min == max) continue; - - /* If minimizing, we have to test the rest of the pattern before each - subsequent match. */ - - if (minimize) - { - for (i = min;; i++) - { - if (match(eptr, ecode, offset_top, md, ims, eptrb, 0)) return TRUE; - if (i >= max || eptr >= md->end_subject) return FALSE; - - c = *eptr++; - switch(ctype) - { - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0 && c == NEWLINE) return FALSE; -#ifdef SUPPORT_UTF8 - if (md->utf8) - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; -#endif - break; - - case OP_NOT_DIGIT: - if ((md->ctypes[c] & ctype_digit) != 0) return FALSE; - break; - - case OP_DIGIT: - if ((md->ctypes[c] & ctype_digit) == 0) return FALSE; - break; - - case OP_NOT_WHITESPACE: - if ((md->ctypes[c] & ctype_space) != 0) return FALSE; - break; - - case OP_WHITESPACE: - if ((md->ctypes[c] & ctype_space) == 0) return FALSE; - break; - - case OP_NOT_WORDCHAR: - if ((md->ctypes[c] & ctype_word) != 0) return FALSE; - break; - - case OP_WORDCHAR: - if ((md->ctypes[c] & ctype_word) == 0) return FALSE; - break; - } - } - /* Control never gets here */ - } - - /* If maximizing it is worth using inline code for speed, doing the type - test once at the start (i.e. keep it out of the loop). */ - - else - { - const uschar *pp = eptr; - switch(ctype) - { - case OP_ANY: - - /* Special code is required for UTF8, but when the maximum is unlimited - we don't need it. */ - -#ifdef SUPPORT_UTF8 - if (md->utf8 && max < INT_MAX) - { - if ((ims & PCRE_DOTALL) == 0) - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || *eptr++ == NEWLINE) break; - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - } - else - { - for (i = min; i < max; i++) - { - eptr++; - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - } - break; - } -#endif - /* Non-UTF8 can be faster */ - if ((ims & PCRE_DOTALL) == 0) - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || *eptr == NEWLINE) break; - eptr++; - } - } - else - { - c = max - min; - if (c > md->end_subject - eptr) c = md->end_subject - eptr; - eptr += c; - } - break; - - case OP_NOT_DIGIT: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) != 0) - break; - eptr++; - } - break; - - case OP_DIGIT: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) == 0) - break; - eptr++; - } - break; - - case OP_NOT_WHITESPACE: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) != 0) - break; - eptr++; - } - break; - - case OP_WHITESPACE: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) == 0) - break; - eptr++; - } - break; - - case OP_NOT_WORDCHAR: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) != 0) - break; - eptr++; - } - break; - - case OP_WORDCHAR: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) == 0) - break; - eptr++; - } - break; - } - - while (eptr >= pp) - { - if (match(eptr--, ecode, offset_top, md, ims, eptrb, 0)) - return TRUE; -#ifdef SUPPORT_UTF8 - if (md->utf8) - while (eptr > pp && (*eptr & 0xc0) == 0x80) eptr--; -#endif - } - return FALSE; - } - /* Control never gets here */ - - /* There's been some horrible disaster. */ - - default: - DPRINTF(("Unknown opcode %d\n", *ecode)); - md->errorcode = PCRE_ERROR_UNKNOWN_NODE; - return FALSE; - } - - /* Do not stick any code in here without much thought; it is assumed - that "continue" in the code above comes out to here to repeat the main - loop. */ - - } /* End of main loop */ -/* Control never reaches here */ -} - - - - -/************************************************* -* Execute a Regular Expression * -*************************************************/ - -/* This function applies a compiled re to a subject string and picks out -portions of the string if it matches. Two elements in the vector are set for -each substring: the offsets to the start and end of the substring. - -Arguments: - external_re points to the compiled expression - external_extra points to "hints" from pcre_study() or is NULL - subject points to the subject string - length length of subject string (may contain binary zeros) - start_offset where to start in the subject string - options option bits - offsets points to a vector of ints to be filled in with offsets - offsetcount the number of elements in the vector - -Returns: > 0 => success; value is the number of elements filled in - = 0 => success, but offsets is not big enough - -1 => failed to match - < -1 => some kind of unexpected problem -*/ - -int -pcre_exec(const pcre *external_re, const pcre_extra *external_extra, - const char *subject, int length, int start_offset, int options, int *offsets, - int offsetcount) -{ -int resetcount, ocount; -int first_char = -1; -int req_char = -1; -int req_char2 = -1; -unsigned long int ims = 0; -match_data match_block; -const uschar *start_bits = NULL; -const uschar *start_match = (const uschar *)subject + start_offset; -const uschar *end_subject; -const uschar *req_char_ptr = start_match - 1; -const real_pcre *re = (const real_pcre *)external_re; -const real_pcre_extra *extra = (const real_pcre_extra *)external_extra; -BOOL using_temporary_offsets = FALSE; -BOOL anchored; -BOOL startline; - -if ((options & ~PUBLIC_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION; - -if (re == NULL || subject == NULL || - (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL; -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; - -anchored = ((re->options | options) & PCRE_ANCHORED) != 0; -startline = (re->options & PCRE_STARTLINE) != 0; - -match_block.start_pattern = re->code; -match_block.start_subject = (const uschar *)subject; -match_block.end_subject = match_block.start_subject + length; -end_subject = match_block.end_subject; - -match_block.endonly = (re->options & PCRE_DOLLAR_ENDONLY) != 0; -match_block.utf8 = (re->options & PCRE_UTF8) != 0; - -match_block.notbol = (options & PCRE_NOTBOL) != 0; -match_block.noteol = (options & PCRE_NOTEOL) != 0; -match_block.notempty = (options & PCRE_NOTEMPTY) != 0; - -match_block.errorcode = PCRE_ERROR_NOMATCH; /* Default error */ - -match_block.lcc = re->tables + lcc_offset; -match_block.ctypes = re->tables + ctypes_offset; - -/* The ims options can vary during the matching as a result of the presence -of (?ims) items in the pattern. They are kept in a local variable so that -restoring at the exit of a group is easy. */ - -ims = re->options & (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL); - -/* If the expression has got more back references than the offsets supplied can -hold, we get a temporary bit of working store to use during the matching. -Otherwise, we can use the vector supplied, rounding down its size to a multiple -of 3. */ - -ocount = offsetcount - (offsetcount % 3); - -if (re->top_backref > 0 && re->top_backref >= ocount/3) - { - ocount = re->top_backref * 3 + 3; - match_block.offset_vector = (int *)(pcre_malloc)(ocount * sizeof(int)); - if (match_block.offset_vector == NULL) return PCRE_ERROR_NOMEMORY; - using_temporary_offsets = TRUE; - DPRINTF(("Got memory to hold back references\n")); - } -else match_block.offset_vector = offsets; - -match_block.offset_end = ocount; -match_block.offset_max = (2*ocount)/3; -match_block.offset_overflow = FALSE; - -/* Compute the minimum number of offsets that we need to reset each time. Doing -this makes a huge difference to execution time when there aren't many brackets -in the pattern. */ - -resetcount = 2 + re->top_bracket * 2; -if (resetcount > offsetcount) resetcount = ocount; - -/* Reset the working variable associated with each extraction. These should -never be used unless previously set, but they get saved and restored, and so we -initialize them to avoid reading uninitialized locations. */ - -if (match_block.offset_vector != NULL) - { - register int *iptr = match_block.offset_vector + ocount; - register int *iend = iptr - resetcount/2 + 1; - while (--iptr >= iend) *iptr = -1; - } - -/* Set up the first character to match, if available. The first_char value is -never set for an anchored regular expression, but the anchoring may be forced -at run time, so we have to test for anchoring. The first char may be unset for -an unanchored pattern, of course. If there's no first char and the pattern was -studied, there may be a bitmap of possible first characters. */ - -if (!anchored) - { - if ((re->options & PCRE_FIRSTSET) != 0) - { - first_char = re->first_char; - if ((ims & PCRE_CASELESS) != 0) first_char = match_block.lcc[first_char]; - } - else - if (!startline && extra != NULL && - (extra->options & PCRE_STUDY_MAPPED) != 0) - start_bits = extra->start_bits; - } - -/* For anchored or unanchored matches, there may be a "last known required -character" set. If the PCRE_CASELESS is set, implying that the match starts -caselessly, or if there are any changes of this flag within the regex, set up -both cases of the character. Otherwise set the two values the same, which will -avoid duplicate testing (which takes significant time). This covers the vast -majority of cases. It will be suboptimal when the case flag changes in a regex -and the required character in fact is caseful. */ - -if ((re->options & PCRE_REQCHSET) != 0) - { - req_char = re->req_char; - req_char2 = ((re->options & (PCRE_CASELESS | PCRE_ICHANGED)) != 0)? - (re->tables + fcc_offset)[req_char] : req_char; - } - -/* Loop for handling unanchored repeated matching attempts; for anchored regexs -the loop runs just once. */ - -do - { - int rc; - register int *iptr = match_block.offset_vector; - register int *iend = iptr + resetcount; - - /* Reset the maximum number of extractions we might see. */ - - while (iptr < iend) *iptr++ = -1; - - /* Advance to a unique first char if possible */ - - if (first_char >= 0) - { - if ((ims & PCRE_CASELESS) != 0) - while (start_match < end_subject && - match_block.lcc[*start_match] != first_char) - start_match++; - else - while (start_match < end_subject && *start_match != first_char) - start_match++; - } - - /* Or to just after \n for a multiline match if possible */ - - else if (startline) - { - if (start_match > match_block.start_subject + start_offset) - { - while (start_match < end_subject && start_match[-1] != NEWLINE) - start_match++; - } - } - - /* Or to a non-unique first char after study */ - - else if (start_bits != NULL) - { - while (start_match < end_subject) - { - register int c = *start_match; - if ((start_bits[c/8] & (1 << (c&7))) == 0) start_match++; else break; - } - } - -#ifdef DEBUG /* Sigh. Some compilers never learn. */ - printf(">>>> Match against: "); - pchars(start_match, end_subject - start_match, TRUE, &match_block); - printf("\n"); -#endif - - /* If req_char is set, we know that that character must appear in the subject - for the match to succeed. If the first character is set, req_char must be - later in the subject; otherwise the test starts at the match point. This - optimization can save a huge amount of backtracking in patterns with nested - unlimited repeats that aren't going to match. We don't know what the state of - case matching may be when this character is hit, so test for it in both its - cases if necessary. However, the different cased versions will not be set up - unless PCRE_CASELESS was given or the casing state changes within the regex. - Writing separate code makes it go faster, as does using an autoincrement and - backing off on a match. */ - - if (req_char >= 0) - { - register const uschar *p = start_match + ((first_char >= 0)? 1 : 0); - - /* We don't need to repeat the search if we haven't yet reached the - place we found it at last time. */ - - if (p > req_char_ptr) - { - /* Do a single test if no case difference is set up */ - - if (req_char == req_char2) - { - while (p < end_subject) - { - if (*p++ == req_char) { p--; break; } - } - } - - /* Otherwise test for either case */ - - else - { - while (p < end_subject) - { - register int pp = *p++; - if (pp == req_char || pp == req_char2) { p--; break; } - } - } - - /* If we can't find the required character, break the matching loop */ - - if (p >= end_subject) break; - - /* If we have found the required character, save the point where we - found it, so that we don't search again next time round the loop if - the start hasn't passed this character yet. */ - - req_char_ptr = p; - } - } - - /* When a match occurs, substrings will be set for all internal extractions; - we just need to set up the whole thing as substring 0 before returning. If - there were too many extractions, set the return code to zero. In the case - where we had to get some local store to hold offsets for backreferences, copy - those back references that we can. In this case there need not be overflow - if certain parts of the pattern were not used. */ - - match_block.start_match = start_match; - if (!match(start_match, re->code, 2, &match_block, ims, NULL, match_isgroup)) - continue; - - /* Copy the offset information from temporary store if necessary */ - - if (using_temporary_offsets) - { - if (offsetcount >= 4) - { - memcpy(offsets + 2, match_block.offset_vector + 2, - (offsetcount - 2) * sizeof(int)); - DPRINTF(("Copied offsets from temporary memory\n")); - } - if (match_block.end_offset_top > offsetcount) - match_block.offset_overflow = TRUE; - - DPRINTF(("Freeing temporary memory\n")); - (pcre_free)(match_block.offset_vector); - } - - rc = match_block.offset_overflow? 0 : match_block.end_offset_top/2; - - if (offsetcount < 2) rc = 0; else - { - offsets[0] = start_match - match_block.start_subject; - offsets[1] = match_block.end_match_ptr - match_block.start_subject; - } - - DPRINTF((">>>> returning %d\n", rc)); - return rc; - } - -/* This "while" is the end of the "do" above */ - -while (!anchored && - match_block.errorcode == PCRE_ERROR_NOMATCH && - start_match++ < end_subject); - -if (using_temporary_offsets) - { - DPRINTF(("Freeing temporary memory\n")); - (pcre_free)(match_block.offset_vector); - } - -DPRINTF((">>>> returning %d\n", match_block.errorcode)); - -return match_block.errorcode; -} - -/* End of pcre.c */ diff --git a/parser/pcre/pcre.h b/parser/pcre/pcre.h deleted file mode 100644 index d6c239394..000000000 --- a/parser/pcre/pcre.h +++ /dev/null @@ -1,113 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* Copyright (c) 1997-2001 University of Cambridge */ - -#ifndef _PCRE_H -#define _PCRE_H - -/* The file pcre.h is build by "configure". Do not edit it; instead -make changes to pcre.in. */ - -#define PCRE_MAJOR 3 -#define PCRE_MINOR 9 -#define PCRE_DATE 02-Jan-2002 - -/* Win32 uses DLL by default */ - -#ifdef _WIN32 -# ifdef STATIC -# define PCRE_DL_IMPORT -# else -# define PCRE_DL_IMPORT __declspec(dllimport) -# endif -#else -# define PCRE_DL_IMPORT -#endif - -/* Have to include stdlib.h in order to ensure that size_t is defined; -it is needed here for malloc. */ - -#include - -/* Allow for C++ users */ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Options */ - -#define PCRE_CASELESS 0x0001 -#define PCRE_MULTILINE 0x0002 -#define PCRE_DOTALL 0x0004 -#define PCRE_EXTENDED 0x0008 -#define PCRE_ANCHORED 0x0010 -#define PCRE_DOLLAR_ENDONLY 0x0020 -#define PCRE_EXTRA 0x0040 -#define PCRE_NOTBOL 0x0080 -#define PCRE_NOTEOL 0x0100 -#define PCRE_UNGREEDY 0x0200 -#define PCRE_NOTEMPTY 0x0400 -#define PCRE_UTF8 0x0800 - -/* Exec-time and get-time error codes */ - -#define PCRE_ERROR_NOMATCH (-1) -#define PCRE_ERROR_NULL (-2) -#define PCRE_ERROR_BADOPTION (-3) -#define PCRE_ERROR_BADMAGIC (-4) -#define PCRE_ERROR_UNKNOWN_NODE (-5) -#define PCRE_ERROR_NOMEMORY (-6) -#define PCRE_ERROR_NOSUBSTRING (-7) - -/* Request types for pcre_fullinfo() */ - -#define PCRE_INFO_OPTIONS 0 -#define PCRE_INFO_SIZE 1 -#define PCRE_INFO_CAPTURECOUNT 2 -#define PCRE_INFO_BACKREFMAX 3 -#define PCRE_INFO_FIRSTCHAR 4 -#define PCRE_INFO_FIRSTTABLE 5 -#define PCRE_INFO_LASTLITERAL 6 - -/* Types */ - -struct real_pcre; /* declaration; the definition is private */ -struct real_pcre_extra; /* declaration; the definition is private */ - -typedef struct real_pcre pcre; -typedef struct real_pcre_extra pcre_extra; - -/* Store get and free functions. These can be set to alternative malloc/free -functions if required. Some magic is required for Win32 DLL; it is null on -other OS. */ - -PCRE_DL_IMPORT extern void *(*pcre_malloc)(size_t); -PCRE_DL_IMPORT extern void (*pcre_free)(void *); - -#undef PCRE_DL_IMPORT - -/* Functions */ - -extern pcre *pcre_compile(const char *, int, const char **, int *, - const unsigned char *); -extern int pcre_copy_substring(const char *, int *, int, int, char *, int); -extern int pcre_exec(const pcre *, const pcre_extra *, const char *, - int, int, int, int *, int); -extern void pcre_free_substring(const char *); -extern void pcre_free_substring_list(const char **); -extern int pcre_get_substring(const char *, int *, int, int, const char **); -extern int pcre_get_substring_list(const char *, int *, int, const char ***); -extern int pcre_info(const pcre *, int *, int *); -extern int pcre_fullinfo(const pcre *, const pcre_extra *, int, void *); -extern const unsigned char *pcre_maketables(void); -extern pcre_extra *pcre_study(const pcre *, int, const char **); -extern const char *pcre_version(void); - -#ifdef __cplusplus -} /* extern "C" */ -#endif - -#endif /* End of pcre.h */