Add additional info about complain mode, its behavior, how to enable
it and add warnings about its use.
In addition add info on how to set kernel parameters on boot for
the various options that are covered.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/722
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
Rule downgrades are used to provide some confinement when a feature
is only partially supported by the kernel.
Eg. On a kernel that doesn't support fine grained af_unix mediation
but does support network mediation.
unix (connect, receive, send)
type=stream
peer=(addr="@/tmp/.ICE-unix/[0-9]*"),
will be downgraded to
network unix type=stream,
Which while more permissive still provides some mediation while
allowing the appication to still function. However making the rule
a deny rule result in tightening the profile.
Eg.
deny unix (connect, receive, send)
type=stream
peer=(addr="@/tmp/.ICE-unix/[0-9]*"),
will be downgraded to
deny network unix type=stream,
and that deny rule will take priority over any allow rule. Which means
that if the profile also had unix allow rules they will get blocked by
the downgraded deny rule, because deny rules have a higher priority,
and the application will break. Even worse there is no way to add the
functionality back to the profile without deleting the offending deny
rule.
To fix this we drop deny rules that can't be downgraded in a way that
won't break the application.
Fixes: https://bugzilla.opensuse.org/show_bug.cgi?id=1180766
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/700
Signed-off-by: John Johansen <john.johansen@canonical.com>
The dynamic_cast operator is slow as it needs to look at RTTI information and even does some string comparisons, especially in deep hierarchies. Profiling with callgrind showed that dynamic_cast can eat a huge portion of the running time, as it takes most of the time that is spent in the simplify_tree() function. For some complex profiles, the number of calls to dynamic_cast can be in the range of millions.
This commit replaces the use of dynamic_cast in the Node hierarchy with a method called is_type(), which returns true if the pointer can be casted to the specified type. It works by looking at an Node object field that is an integer with bits set for each type up in the hierarchy. Therefore, dynamic_cast is replaced by a simple bits operation.
In my tests, for complex profiles the improvement in speed even made running apparmor_parser with "-O no-expr-simplify" slower that when simplifying, apparently because the smaller trees obtained after the expression simplification require less calls to DFA::update_state_transitions(), and that compensates the now significantly slower time spent in simplify_tree(). This opens the door to maybe avoid "-O no-expr-simplify" in the snapd daemon, thus allowing faster run-time checks in the kernel.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/711
Acked-by: John Johansen <john.johansen@canonical.com>
On some systems the build of the parser is spitting out
cc: fatal error: no input files
compilation terminated.
This is being caused by the REALLOCARRAY checkfailing due to cpp trying
to check for both input and output files and not correctly falling
back to stdin/stdout if infile and outfile aren't specified.
Fix this by being explicit that infile and outfile are supposed to
use stdin and stdout.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/712
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
The dynamic_cast operator is slow as it needs to look at RTTI
information and even does some string comparisons, especially in deep
hierarchies like the one for Node. Profiling with callgrind showed
that dynamic_cast can eat a huge portion of the running time, as it
takes most of the time that is spent in the simplify_tree()
function. For some complex profiles, the number of calls to
dynamic_cast can be in the range of millions.
This commit replaces the use of dynamic_cast in the Node hierarchy
with a method called is_type(), which returns true if the pointer can
be casted to the specified type. It works by looking at a Node object
field that is an integer with bits set for each type up in the
hierarchy. Therefore, dynamic_cast is replaced by a simple bits
operation.
This change can reduce the compilation times for some profiles more
that 50%, especially in arm/arm64 arch. This opens the door to maybe
avoid "-O no-expr-simplify" in the snapd daemon, as now that option
would make the compilation slower in almost all cases.
This is the example profile used in some of my tests, with this change
the run-time is around 1/3 of what it was before on an x86 laptop:
profile "test" (attach_disconnected,mediate_deleted) {
dbus send
bus={fcitx,session}
path=/inputcontext_[0-9]*
interface=org.fcitx.Fcitx.InputContext
member="{Close,Destroy,Enable}IC"
peer=(label=unconfined),
dbus send
bus={fcitx,session}
path=/inputcontext_[0-9]*
interface=org.fcitx.Fcitx.InputContext
member=Reset
peer=(label=unconfined),
dbus receive
bus=fcitx
peer=(label=unconfined),
dbus receive
bus=session
interface=org.fcitx.Fcitx.*
peer=(label=unconfined),
dbus send
bus={fcitx,session}
path=/inputcontext_[0-9]*
interface=org.fcitx.Fcitx.InputContext
member="Focus{In,Out}"
peer=(label=unconfined),
dbus send
bus={fcitx,session}
path=/inputcontext_[0-9]*
interface=org.fcitx.Fcitx.InputContext
member="{CommitPreedit,Set*}"
peer=(label=unconfined),
dbus send
bus={fcitx,session}
path=/inputcontext_[0-9]*
interface=org.fcitx.Fcitx.InputContext
member="{MouseEvent,ProcessKeyEvent}"
peer=(label=unconfined),
dbus send
bus={fcitx,session}
path=/inputcontext_[0-9]*
interface=org.freedesktop.DBus.Properties
member=GetAll
peer=(label=unconfined),
dbus (send)
bus=session
path=/org/a11y/bus
interface=org.a11y.Bus
member=GetAddress
peer=(label=unconfined),
dbus (send)
bus=session
path=/org/a11y/bus
interface=org.freedesktop.DBus.Properties
member=Get{,All}
peer=(label=unconfined),
dbus (receive, send)
bus=accessibility
path=/org/a11y/atspi/**
peer=(label=unconfined),
dbus (send)
bus=system
path=/org/freedesktop/Accounts
interface=org.freedesktop.DBus.Introspectable
member=Introspect
peer=(label=unconfined),
dbus (send)
bus=system
path=/org/freedesktop/Accounts
interface=org.freedesktop.Accounts
member=FindUserById
peer=(label=unconfined),
dbus (receive, send)
bus=system
path=/org/freedesktop/Accounts/User[0-9]*
interface=org.freedesktop.DBus.Properties
member={Get,PropertiesChanged}
peer=(label=unconfined),
dbus (send)
bus=session
interface=org.gtk.Actions
member=Changed
peer=(name=org.freedesktop.DBus, label=unconfined),
dbus (receive)
bus=session
interface=org.gtk.Actions
member={Activate,DescribeAll,SetState}
peer=(label=unconfined),
dbus (receive)
bus=session
interface=org.gtk.Menus
member={Start,End}
peer=(label=unconfined),
dbus (send)
bus=session
interface=org.gtk.Menus
member=Changed
peer=(name=org.freedesktop.DBus, label=unconfined),
dbus (send)
bus=session
path="/com/ubuntu/MenuRegistrar"
interface="com.ubuntu.MenuRegistrar"
member="{Register,Unregister}{App,Surface}Menu"
peer=(label=unconfined),
}
65ba20b955ba91cd44e7a1a3f3194ea7f567dcb2 provides a fix for job
scaling but during a merge conflict part of the patch got dropped.
This is the missing portion of the patch that was approved as part
of MR703
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/703
Signed-off-by: John Johansen <john.johansen@canonical.com>
job scaling allows the parser to resample the number of cpus available
and increase the number of jobs that can be launched if cpu available
increases.
Unfortunately job scaling was being applied even when a fixed number
of jobs was specified. So
--jobs=2
doesn't actually clamp the compile at 2 jobs.
Instead job scaling should only be applied when --jobs=auto or when
jobs are set to a multiple of the cpus.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/703
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
The parsers default settings can OOM smaller special use systems
when building or loading policy. Use basic memory info and cpus to
tune the parser for lower resource environments.
Currently this just sets the jobs parameters if the default values
haven't been modified by user config or parameters. But in the
future this could add cache control and compile parameters.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/702
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
If af_unix rules are not supported but network rules are and
--warn=rule-downgraded is not set then the parser will incorrectly
output warning when the rule is actually being downgraded.
Warning from profile test-profile (./prof): extended network unix socket rules not enforced
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/699
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/144
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
3.0 added the ability to extract and use the kernels cap mask
to augment its internal capability list as a stop gap measure to
support new capabilities.
Unfortunately not all kernel export the cap/mask and this is causing
the policy compile to fail. If the kernel doesn't export a cp/mask
just use the internal list.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/140
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/691
Signed-off-by: John Johansen <john.johansen@canonical.com>
Adjust function and variable names to spell separator correctly. Kept
as a distinct change in case someone wants to cherrypick other fixes.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/687
Fix spelling errors in code strings. Some strings are translatable.
This fixes are potentially user visible.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/687
With the exception of the documentation fixes, these should all be
invisible to users.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/687
The generated files are exactly the same, but the code is a bit more
readable.
Additional differences:
- added test_gen_list() to verify the result of gen_list()
- null_target has a non-empty value to avoid that it gets skipped in
loops as empty value
- invert_save has an additional entry for ''
- copyright header added (based on git log of gen-xtrans.pl)
Linux 5.9 added CAP_CHECKPOINT_RESTORE add it to the set of supported
capabilities.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/654
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
pwarn() prints "Warning" itsself, therefore it doesn't make sense to include/repeat that word in the actual warning text.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/650
Acked-by: John Johansen <john.johansen@canonical.com>
when a profile is being forced to complain a variation of the
following message is displayed
Warning from /etc/apparmor.d/usr.sbin.sssd (/etc/apparmor.d/usr.sbin.sssd line 54): Warning failed to create cache: usr.sbin.sssd
This is incorrect in that the parser doesn't even try to create the
cache, it just can't cache force complain profiles.
Output a warning message for this case that is correct.
Fixes: https://bugs.launchpad.net/ubuntu/+source/apparmor/+bug/1899218
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/649
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
Acked-by: Christian Boltz <apparmor@cboltz.de>
The comments describing the example rules to pin the abi are wrong.
The comments of the two example rules are swapped resulting in confusion.
While we are at it. Add a reference to the wiki doc on abi, and
how to disable abi warnings without pinning.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/648
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
add limits.h
aa_status.c:269:22: error: 'PATH_MAX' undeclared (first use in this function); did you mean 'AF_MAX'? | 269 | real_exe = calloc(PATH_MAX + 1, sizeof(char));
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/647
Signed-off-by: Armin Kuster [akuster808@gmail.com](mailto:akuster808@gmail.com)
Acked-by: John Johansen <john.johansen@canonical.com>
In cross build environments, using the hosts cpp gives incorrect
detection of reallocarray. Change cpp to a variable.
fixes:
parser_misc.c: In function 'int capable_add_cap(const char*, int, unsigned int, capability_flags)':
| parser_misc.c:297:37: error: 'reallocarray' was not declared in this scope
| 297 | tmp = (struct capability_table *) reallocarray(cap_table, sizeof(struct capability_table), cap_table_size+1);
Signed-off-by: Armin Kuster <akuster808@gmail.com>
By using assertIn, we test if a given message is contained in the parser
error message. This can (and actually does) hide errors if the error
message changes outside the checked part.
Change the test to assertEqual to test the full error message, and add
'\n' to all expected error messages to make them still match.
Depending on the kernel version and patches, there can be an additional
message
Cache read/write disabled: interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.)
which will be ignored by the check.
bison change the default text past to yerror in bison 3.6, this
breaks make check as some tests are comparing against the error
output
======================================================================
FAIL: test_modefail (__main__.AAErrorTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/jj/apparmor.git/parser/tst/testlib.py", line 50, in new_unittest_func
return unittest_func(self)
File "./errors.py", line 58, in test_modefail
self._run_test(
File "./errors.py", line 40, in _run_test
self.assertIn(message, outerr, report)
AssertionError: 'AppArmor parser error for errors/modefail.sd in profile errors/modefail.sd at line 6: syntax error, unexpected TOK_ID, expecting TOK_MODE' not found in 'AppArmor parser error for errors/modefail.sd in profile errors/modefail.sd at line 6: syntax error\n' :
Command: ../apparmor_parser --config-file=./parser.conf -S -I errors errors/modefail.sd
Exit value:1
STDERR
AppArmor parser error for errors/modefail.sd in profile errors/modefail.sd at line 6: syntax error
To fix this we need to add
define parse.error=verbose
to bison. Unfortunately define parse.error was only added in bison 3.0
and and older versions of bison will break if that is defined in
parser_yacc.y
Instead test for the version of bison available and set define parse.error
as a build flag if supported by the version of bison being called.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/640
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
Currently mount options type= and options= do not expand variables
but they should. Fix it.
Note: this does not treat either as paths because their use is
too device dependent for it to be safe to filter slashes.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/638
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Steve Beattie <steve.beattie@canonical.com>
Attempt to get clarity on what is valid syntax for mount options and
fstype options.
Note that simple_tests/mount/bad_opt_27.sd is marked TODO, as the
parser accepts it but should not.
Also mark the tests as expecting to fail to raise an exception by the
python utils.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/607
Signed-off-by: John Johansen <john.johansen@canonical.com>
Test to ensure that slash filtering occurs properly in mount path
components.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/607
Signed-off-by: John Johansen <john.johansen@canonical.com>
Test to ensure that slash filtering occurs properly in dbus path
components.
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/607
Signed-off-by: John Johansen <john.johansen@canonical.com>
The mnt_point and devices conditionals in mount rules are generally
paths and should have slashes filtered after variable expansion.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/607
Signed-off-by: John Johansen <john.johansen@canonical.com>
Similar to unix addr rules, the dbus path conditional is more a path
than a profile name and should get its slashes filtered after variable
expansion.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/607
Signed-off-by: John Johansen <john.johansen@canonical.com>
af_unix allows for sockets to be bound to a name that is autogenerated.
Currently this type of binding is only supported by a very generic
rule.
unix (bind) type=dgram,
but this allows both sockets with specified names and anonymous
sockets. Extend unix rule syntax to support specifying just an
auto bind socket by specifying addr=auto
eg.
unix (bind) addr=auto,
It is important to note that addr=auto only works for the bind
permission as once the socket is bound to an autogenerated address,
the addr with have a valid unique value that can be matched against
with a regular
addr=@name
expression
Fixes: https://bugs.launchpad.net/apparmor/+bug/1867216
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/521
Signed-off-by: John Johansen <john.johansen@canonical.com>
v8 network permissions extend into the range used by exec mapping
so it is important to not blindly do execmapping on both the
file dfa and policydb dfa any more.
Track what type of dfa and its permissions we are building so
we can properly apply exec mapping only when building the
file dfa.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/521
Signed-off-by: John Johansen <john.johansen@canonical.com>
Snapd now loads its own policy via its own systemd unit
https://github.com/snapcore/snapd/pull/8467
If A distro is not using snapd systemd unit then dropping snapd policy
from the apparmor unit is a breaking change, distros will either need
to use the snapd systemd unit or revert
0164fd05 init: stop loading snap policy
Signed-off-by: John Johansen <john.johansen@canonical.com>
snapd now loads its snap policy via its own systemd unit, so stop
loading the snap policy in /var/lib/snapd/apparmor/profiles
Fixs: https://launchpad.net/bugs/1871148
Signed-off-by: John Johansen <john.johansen@canonical.com>
This add a test to ensure that the parser is inserting rules to allow
access to the proc interface for change_hat.
Unfortunately the rule the parser inserts is a bare owner write that
we can't replicate in policy as policy write perm maps to create,
append and write.
So to test equality compare profiles using rules granting access to
the proc attr interface except one uses the append permission and
the other uses write. They will differ in permissions unless the
parser inserts the proc attr write rule for change_hat in which
case the permissions will get merged and we have equivalence.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/626
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR625 fixed hats not emitting the rule to access the proc interface
needed for change_hat, but it broke the rule being emitted for the
parent (which used to work).
The proc attr access rule should be emitted for any profile that
is a hat OR any profile that contains hats.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/626
Signed-off-by: John Johansen <john.johansen@canonical.com>
The parser is supposed to add a rule to profiles if they are a hat
or contain hats granting write access to the kernel interfaces
used to perform the change_hat operation.
Unfortunately the check is broken and currently won't add the
rule to hats (it does add it for the parent).
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/625
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Acked-by: Steve Beattie <steve.beattie@canonical.com>
Convert the two commented-out fprintf() lines in is_merged_x_consistent() to useful debug logging using PDEBUG macro.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/616
Acked-by: John Johansen <john.johansen@canonical.com>
A debug message in reset_parser() gives developers more data about how
the parser is behaving. In addition, it provides much needed context to
the relatively vague debug message in clear_cap_flag().
Another solution might be to pass the profile name into
clear_cap_flag(), however, clear_cap_flag() does not need the profile
name, except potentially for debugging purposes.
Signed-off-by: Mike Salvatore <mike.salvatore@canonical.com>
