Ideally we'd update them to the chosen exec target - but until this is
implemented, it doesn't make sense to ask about adding a //null-* peer
to a profile.
I propose this patch for all branches.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1090
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Merge request https://gitlab.com/apparmor/apparmor/merge_requests/1084
makes it so attach_disconnected.path implies attach_disconnected, so
remove superfluous flag from tests.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
setns tests part of the userns could fail if the parent process opened
the child pipe to write it was done before the child opened the pipe
with read permissions.
From the fifo(7) man page:
A process can open a FIFO in nonblocking mode. In this case, opening
for read‐only succeeds even if no one has opened on the write side yet
and opening for write‐only fails with ENXIO (no such device or
address) unless the other end has already been opened.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1093
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
setns tests part of the userns could fail if the parent process opened
the child pipe to write it was done before the child opened the pipe
with read permissions.
From the fifo(7) man page:
A process can open a FIFO in nonblocking mode. In this case, opening
for read‐only succeeds even if no one has opened on the write side yet
and opening for write‐only fails with ENXIO (no such device or
address) unless the other end has already been opened.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Now that we have `final_name` as shortcut for
`hashlog[aamode][full_profile]['final_name']`, update the code that used
the long version to make it more readable.
ask_exec() and ask_addhat() set
hashlog[aamode][full_profile]['final_name'].
While this was used to get profile and hat split, it was not used as key
for log_dict. This resulted in entries like
log_dict['PERMITTING']['foo//null-/usr/bin/cat']
which are obviously wrong.
Use final_name as log_dict key so that we end up with (assuming child
exec was selected)
log_dict['PERMITTING']['foo///usr/bin/cat']
Ideally we'd update them to the chosen exec target - but until this is
implemented, it doesn't make sense to ask about adding a //null-* peer
to a profile.
On (terribly, but real-world) slow buid hosts, running test-logprof.py
fails with a timeout. Increase the timeout so that even those build
hosts get enough time to finish the aa-logprof tests.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1087
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
On (terribly, but real-world) slow buid hosts, running test-logprof.py
fails with a timeout. Increase the timeout so that even those build
hosts get enough time to finish the aa-logprof tests.
str.removeprefix() was introduced in Python 3.9. Replace it with
backwards-compatible code.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1085
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Currently you need to use attach_disconnected with
attach_disconnected.path=XXX to be able to attach to a different
location than / whic is ugly and redundant.
Make it so attach_disconnected.path implies attach_disconnected.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1084
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
Currently you need to use attach_disconnected with
attach_disconnected.path=XXX to be able to attach to a different
location than / whic is ugly and redundant.
Make it so attach_disconnected.path implies attach_disconnected.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add support for specifying the path prefix used when attach disconnected
is specified.
TODO: add regression tests
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/661
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Add support for specifying the path prefix used when attach disconnected
is specified. The kernel supports prepending a different value than
/ when a path is disconnected. Expose through a profile flag.
Signed-off-by: John Johansen <john.johansen@canonical.com>
... and a simple test for a single (fake) event for ping.
Notes:
- to let aa-logprof work in the CI environment, we need to skip checking
for the AppArmor mountpoint. Introduce --no-check-mountpoint for this.
- PYTHONPATH and LD_LIBRARY_PATH need to be explicitely forwarded when
starting aa-logprof via subprocess.Popen()
- if the test runs with coverage enabled, it will also start aa-logprof
with coverage (parameters copied from Makefile).
Speaking about coverage - this test adds 4% overall coverage, and 10%
more coverage for apparmor/aa.py.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1082
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Though many Linux distros choose to pass _/usr/lib_ as the libexecdir while configuring dovecot, such as [Debian](https://sources.debian.org/src/dovecot/1%3A2.3.20%2Bdfsg1-1/debian/rules/#L132) and [Arch](https://gitlab.archlinux.org/archlinux/packaging/packages/dovecot/-/blob/main/PKGBUILD#L76), others like Alpine Linux and Gentoo don't pass anything as libexecdir, allowing it to default to _/usr/libexec_.
Both appear to be valid. From [FHS 3.0, Chapter 4.7](https://refspecs.linuxfoundation.org/FHS_3.0/fhs/ch04s07.html):
> Some previous versions of this document did not support _/usr/libexec_, despite it being standard practice in a number of environments. To accomodate this restriction, it became common practice to use _/usr/lib_ instead. Either practice is now acceptable, but each application must choose one way or the other to organize itself.
Allow for the default libexec subdir _/usr/libexec/dovecot_ as well as the more common
_/usr/lib/dovecot_.
Signed-off-by: Peter Levine <plevine457@gmail.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1080
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
... and a simple test for a single (fake) event for ping.
Notes:
- to let aa-logprof work in the CI environment, we need to skip checking
for the AppArmor mountpoint. Introduce --no-check-mountpoint for this.
- PYTHONPATH and LD_LIBRARY_PATH need to be explicitely forwarded when
starting aa-logprof via subprocess.Popen()
- if the test runs with coverage enabled, it will also start aa-logprof
with coverage (parameters copied from Makefile).
Speaking about coverage - this test adds 4% overall coverage, and 10%
more coverage for apparmor/aa.py.
(except the deprecated tunables/sys)
This allows users to extend variables without editing the main tunables
files.
It also allows to cleanly introduce new tunable files (via
tunables/global.d) and new aliases (via tunables/alias.d).
Note: some files already had `include <tunables/$FILE.d>`. These get
changed to `include if exists`, and the comments for these includes get
unified.
Also extend make check to ensure that all tunables include tunables/$FILE.d
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/347
I propose this patch for 3.0..master.
Closes#347
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1077
Approved-by: timeout
Merged-by: Christian Boltz <apparmor@cboltz.de>
Allow for the default libexec subdir, /usr/libexec/dovecot, as well
as the more common /usr/lib/dovecot.
Signed-off-by: Peter Levine <plevine457@gmail.com>
The permissions for AA_NET_OPT need to be bounded by mask so we can
make sure it matches when a policy specified only setopt or only
getopt. This was causing failures on the regression tests
unix_socket_pathname, unix_socket_abstract, unix_socket_unnamed and
unix_socket_autobind
Fixes: 44f3be091 ("parser: convert the stored audit from a bit mask to a bool")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1079
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The permissions for AA_NET_OPT need to be bounded by mask so we can
make sure it matches when a policy specified only setopt or only
getopt. This was causing failures on the regression tests
unix_socket_pathname, unix_socket_abstract, unix_socket_unnamed and
unix_socket_autobind
Fixes: 44f3be091 ("parser: convert the stored audit from a bit mask to a bool")
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
Add support for the prompt profile flag. That allows policy to do an upcall to userspace if supported by the kernel and if a userspace daemon is available.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1062
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Add a json_log option (default: disabled) to logprof.conf that enables
logging of all aa-logprof and aa-genprof input and output to a
/tmp/aa-jsonlog-* file.
This can be useful for debugging, and maybe also to create tests that do
a full aa-logprof run.
This patch introduces a minor behaviour change if aa-logprof errors out
on startup (for example if the config file is broken or the parser can't
be found):
Before:
```
$ aa-logprof --json
{"dialog": "apparmor-json-version","data": "2.12"}
ERROR: Can't find apparmor_parser at /sbin/apparmor_parser
```
After:
```
$ aa-logprof --json
ERROR: Can't find apparmor_parser at /sbin/apparmor_parser
```
Note that the json version line will not be printed if aa-logprof or
aa-genprof error out that early.
If there are no startup errors, the behaviour will not change.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1078
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Minor fixes for the firefox profile:
1. The attachment spec was failing to match `/usr/lib/firefox-esr/firefox-esr` on Debian;
2. The `Mounted` method of `org.gtk.vfs.MountTracker` is received, not sent.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1076
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
Add a json_log option (default: disabled) to logprof.conf that enables
logging of all aa-logprof and aa-genprof input and output to a
/tmp/aa-jsonlog-* file.
This can be useful for debugging, and maybe also to create tests that do
a full aa-logprof run.
This patch introduces a minor behaviour change if aa-logprof errors out
on startup (for example if the config file is broken or the parser can't
be found):
Before:
```
$ aa-logprof --json
{"dialog": "apparmor-json-version","data": "2.12"}
ERROR: Can't find apparmor_parser at /sbin/apparmor_parser
```
After:
```
$ aa-logprof --json
ERROR: Can't find apparmor_parser at /sbin/apparmor_parser
```
Note that the json version line will not be printed if aa-logprof or
aa-genprof error out that early.
If there are no startup errors, the behaviour will not change.
(except the deprecated tunables/sys)
This allows users to extend variables without editing the main tunables
files.
It also allows to cleanly introduce new tunable files (via
tunables/global.d) and new aliases (via tunables/alias.d).
Note: some files already had `include <tunables/$FILE.d>`. These get
changed to `include if exists`, and the comments for these includes get
unified.
Fixes: https://gitlab.com/apparmor/apparmor/-/issues/347
... because it gets translated to CMD_px or CMD_cx earlier in the
function.
Also add a safety check for unknown answers.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1072
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
It appears that lto1 does not support -dynamic, and that ld no longer
documents -dynamic. Which results in the following build failure
when usine lto1 for link time optimizations
```
[ 45s] libtool: link: gcc -shared -fPIC -DPIC .libs/grammar.o .libs/libaalogparse.o .libs/kernel.o .libs/scanner.o .libs/private.o .libs/features.o .libs/kernel_interface.o .libs/policy_cache.o .libs/PMurHash.o -flto-partition=none -O2 -fstack-protector-strong -flto=auto -dynamic -Wl,--version-script=../src/libapparmor.map -flto=auto -pthread -Wl,-soname -Wl,libapparmor.so.1 -o .libs/libapparmor.so.1.17.0
[ 45s] lto1: warning: unrecognized gcc debugging option: y
[ 45s] lto1: warning: unrecognized gcc debugging option: n
[ 45s] lto1: warning: unrecognized gcc debugging option: m
[ 45s] lto1: warning: unrecognized gcc debugging option: i
[ 45s] lto1: warning: unrecognized gcc debugging option: c
```
Switch to -Bdynamic which is documented.
Signed-off-by: John Johansen <john.johansen@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1071
Approved-by: Georgia Garcia <georgia.garcia@canonical.com>
Approved-by: Christian Boltz <apparmor@cboltz.de>
Merged-by: John Johansen <john@jjmx.net>
The test to check if the kernel supports a feature covers two cases:
1. The file/directory indicates a feature is supported.
2. The feature is supported if it's in the contents of the file.
When the intended check is for case 1, and the file does not exist,
then the code checks if it's case 2, but since it was not supposed to
be, we end up grepping a directory, causing an error message. Fix this
by checking if we're grepping a file.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1074
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
This reverts commit 460c3d5b59d020d363ffcf9f61787850ecc0c3e0.
The 4.0 ABI was pinned for the development cycle but it can cause
in-tree uses of parser/parser.conf to fail if it cannot find the 4.0
file in /etc/apparmor.d/abi/.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1073
Approved-by: John Johansen <john@jjmx.net>
Merged-by: John Johansen <john@jjmx.net>
The test to check if the kernel supports a feature covers two cases:
1. The file/directory indicates a feature is supported.
2. The feature is supported if it's in the contents of the file.
When the intended check is for case 1, and the file does not exist,
then the code checks if it's case 2, but since it was not supposed to
be, we end up grepping a directory, causing an error message. Fix this
by checking if we're grepping a file.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
This reverts commit 460c3d5b59d020d363ffcf9f61787850ecc0c3e0.
The 4.0 ABI was pinned for the development cycle but it can cause
in-tree uses of parser/parser.conf to fail if it cannot find the 4.0
file in /etc/apparmor.d/abi/.
Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com>
It appears that lto1 does not support -dynamic, and that ld no longer
documents -dynamic. Which results in the following build failure
when usine lto1 for link time optimizations
[ 45s] libtool: link: gcc -shared -fPIC -DPIC .libs/grammar.o .libs/libaalogparse.o .libs/kernel.o .libs/scanner.o .libs/private.o .libs/features.o .libs/kernel_interface.o .libs/policy_cache.o .libs/PMurHash.o -flto-partition=none -O2 -fstack-protector-strong -flto=auto -dynamic -Wl,--version-script=../src/libapparmor.map -flto=auto -pthread -Wl,-soname -Wl,libapparmor.so.1 -o .libs/libapparmor.so.1.17.0
[ 45s] lto1: warning: unrecognized gcc debugging option: y
[ 45s] lto1: warning: unrecognized gcc debugging option: n
[ 45s] lto1: warning: unrecognized gcc debugging option: m
[ 45s] lto1: warning: unrecognized gcc debugging option: i
[ 45s] lto1: warning: unrecognized gcc debugging option: c
Switch to -Bdynamic which is documented.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Do this to simplify test identification, and also support the different
invocation mechanisms of unittest, like running individual tests.
MR: https://gitlab.com/apparmor/apparmor/-/merge_requests/1070
Signed-off-by: Steve Beattie <steve.beattie@canonical.com>
Approved-by: John Johansen <john@jjmx.net>
