diff --git a/attiny/boards.txt b/attiny/boards.txt
new file mode 100644
index 0000000..3bab3d5
--- /dev/null
+++ b/attiny/boards.txt
@@ -0,0 +1,13 @@
+attiny45.name=ATtiny45
+attiny45.upload.maximum_size=4096
+attiny45.build.mcu=attiny45
+attiny45.build.f_cpu=1000000L
+attiny45.build.core=arduino:arduino
+attiny45.build.variant=tiny8
+
+attiny85.name=ATtiny85
+attiny85.upload.maximum_size=8192
+attiny85.build.mcu=attiny85
+attiny85.build.f_cpu=1000000L
+attiny85.build.core=arduino:arduino
+attiny85.build.variant=tiny8
diff --git a/attiny45_85/cores/attiny45_85/pins_arduino.c b/attiny/variants/tiny8/pins_arduino.h
similarity index 78%
rename from attiny45_85/cores/attiny45_85/pins_arduino.c
rename to attiny/variants/tiny8/pins_arduino.h
index 6bacb15..b274848 100755
--- a/attiny45_85/cores/attiny45_85/pins_arduino.c
+++ b/attiny/variants/tiny8/pins_arduino.h
@@ -25,9 +25,10 @@
   Modified 09-10-2009 for attiny45 A.Saporetti
 */
 
-#include <avr/io.h>
-#include "wiring_private.h"
-#include "pins_arduino.h"
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <avr/pgmspace.h>
 
 // ATMEL ATTINY45 / ARDUINO
 //
@@ -35,33 +36,31 @@
 // Ain0 (D 5) PB5  1|    |8  Vcc
 // Ain3 (D 3) PB3  2|    |7  PB2 (D 2)  Ain1
 // Ain2 (D 4) PB4  3|    |6  PB1 (D 1) pwm1
-//      	  GND  4|    |5  PB0 (D 0) pwm0
+//            GND  4|    |5  PB0 (D 0) pwm0
 //                  +----+
 
 
-#define PB 1
-
-#define REPEAT8(x) x, x, x, x, x, x, x, x
-#define BV0TO7 _BV(0), _BV(1), _BV(2), _BV(3), _BV(4), _BV(5), _BV(6), _BV(7)
-#define BV7TO0 _BV(7), _BV(6), _BV(5), _BV(4), _BV(3), _BV(2), _BV(1), _BV(0)
-
+#ifdef ARDUINO_MAIN
 
 // these arrays map port names (e.g. port B) to the
 // appropriate addresses for various functions (e.g. reading
 // and writing) tiny45 only port B 
-const uint8_t PROGMEM port_to_mode_PGM[] = {
+const uint16_t PROGMEM port_to_mode_PGM[] = {
 	NOT_A_PORT,
-	&DDRB,
+	NOT_A_PORT,
+	(uint16_t) &DDRB,
 };
 
-const uint8_t PROGMEM port_to_output_PGM[] = {
+const uint16_t PROGMEM port_to_output_PGM[] = {
 	NOT_A_PORT,
-	&PORTB,
+	NOT_A_PORT,
+	(uint16_t) &PORTB,
 };
 
-const uint8_t PROGMEM port_to_input_PGM[] = {
+const uint16_t PROGMEM port_to_input_PGM[] = {
 	NOT_A_PIN,
-	&PINB,
+	NOT_A_PIN,
+	(uint16_t) &PINB,
 };
 
 const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
@@ -86,9 +85,13 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
 
 const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
 	TIMER0A, /* OC0A */
-	TIMER1,
+	TIMER0B,
 	NOT_ON_TIMER,
 	NOT_ON_TIMER,
 	NOT_ON_TIMER,
 	NOT_ON_TIMER,
 };
+
+#endif
+
+#endif
\ No newline at end of file
diff --git a/attiny45_85/boards.txt b/attiny45_85/boards.txt
deleted file mode 100644
index 8d77fba..0000000
--- a/attiny45_85/boards.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-attiny45usbtinyisp.name=ATtiny45 (w/ USB Tiny ISP)
-attiny45usbtinyisp.upload.using=arduino:usbtinyisp
-attiny45usbtinyisp.upload.maximum_size=4096
-attiny45usbtinyisp.build.mcu=attiny45
-attiny45usbtinyisp.build.f_cpu=1000000L
-attiny45usbtinyisp.build.core=attiny45_85
-
-attiny45arduinoisp.name=ATtiny45 (w/ Arduino as ISP)
-attiny45arduinoisp.upload.using=arduino:arduinoisp
-attiny45arduinoisp.upload.maximum_size=4096
-attiny45arduinoisp.build.mcu=attiny45
-attiny45arduinoisp.build.f_cpu=1000000L
-attiny45arduinoisp.build.core=attiny45_85
-
-attiny45avrisp.name=ATtiny45 (w/ AVRISP mkII)
-attiny45avrisp.upload.using=arduino:avrispmkii
-attiny45avrisp.upload.maximum_size=4096
-attiny45avrisp.build.mcu=attiny45
-attiny45avrisp.build.f_cpu=1000000L
-attiny45avrisp.build.core=attiny45_85
-
-attiny85usbtinyisp.name=ATtiny85 (w/ USB Tiny ISP)
-attiny85usbtinyisp.upload.using=arduino:usbtinyisp
-attiny85usbtinyisp.upload.maximum_size=8192
-attiny85usbtinyisp.build.mcu=attiny85
-attiny85usbtinyisp.build.f_cpu=1000000L
-attiny85usbtinyisp.build.core=attiny45_85
-
-attiny85arduinoisp.name=ATtiny85 (w/ Arduino as ISP)
-attiny85arduinoisp.upload.using=arduino:arduinoisp
-attiny85arduinoisp.upload.maximum_size=8192
-attiny85arduinoisp.build.mcu=attiny85
-attiny85arduinoisp.build.f_cpu=1000000L
-attiny85arduinoisp.build.core=attiny45_85
-
-attiny85avrisp.name=ATtiny85 (w/ AVRISP mkII)
-attiny85avrisp.upload.using=arduino:avrispmkii
-attiny85avrisp.upload.maximum_size=8192
-attiny85avrisp.build.mcu=attiny85
-attiny85avrisp.build.f_cpu=1000000L
-attiny85avrisp.build.core=attiny45_85
diff --git a/attiny45_85/cores/attiny45_85/.DS_Store b/attiny45_85/cores/attiny45_85/.DS_Store
deleted file mode 100644
index b042455..0000000
Binary files a/attiny45_85/cores/attiny45_85/.DS_Store and /dev/null differ
diff --git a/attiny45_85/cores/attiny45_85/Makefile b/attiny45_85/cores/attiny45_85/Makefile
deleted file mode 100755
index 5223a8f..0000000
--- a/attiny45_85/cores/attiny45_85/Makefile
+++ /dev/null
@@ -1,243 +0,0 @@
-# Arduino 0015 Makefile
-# Arduino adaptation by mellis, eighthave, oli.keller
-#
-# This makefile allows you to build sketches from the command line
-# without the Arduino environment (or Java).
-#
-# Detailed instructions for using the makefile:
-#
-#  1. Copy this file into the folder with your sketch. There should be a
-#     file with the same name as the folder and with the extension .pde
-#     (e.g. foo.pde in the foo/ folder).
-#
-#  2. Modify the line containg "INSTALL_DIR" to point to the directory that
-#     contains the Arduino installation (for example, under Mac OS X, this
-#     might be /Applications/arduino-0012).
-#
-#  3. Modify the line containing "PORT" to refer to the filename
-#     representing the USB or serial connection to your Arduino board
-#     (e.g. PORT = /dev/tty.USB0).  If the exact name of this file
-#     changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*).
-#
-#  4. Set the line containing "MCU" to match your board's processor. 
-#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
-#     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
-#     change F_CPU to 8000000.
-#
-#  5. At the command line, change to the directory containing your
-#     program's file and the makefile.
-#
-#  6. Type "make" and press enter to compile/verify your program.
-#
-#  7. Type "make upload", reset your Arduino board, and press enter to
-#     upload your program to the Arduino board.
-#
-# $Id$
-
-TARGET = $(notdir $(CURDIR))
-INSTALL_DIR = ../../..
-PORT = /dev/tty.usb*
-UPLOAD_RATE = 19200
-AVRDUDE_PROGRAMMER = stk500v1
-MCU = attiny84
-F_CPU = 8000000
-
-############################################################################
-# Below here nothing should be changed...
-
-ARDUINO = $(INSTALL_DIR)/hardware/cores/arduino
-AVR_TOOLS_PATH = $(INSTALL_DIR)/hardware/tools/avr/bin
-SRC =  $(ARDUINO)/pins_arduino.c $(ARDUINO)/wiring.c \
-$(ARDUINO)/wiring_analog.c $(ARDUINO)/wiring_digital.c \
-$(ARDUINO)/wiring_pulse.c $(ARDUINO)/wiring_serial.c \
-$(ARDUINO)/wiring_shift.c $(ARDUINO)/WInterrupts.c
-CXXSRC = $(ARDUINO)/HardwareSerial.cpp $(ARDUINO)/WMath.cpp \
-$(ARDUINO)/Print.cpp
-FORMAT = ihex
-
-
-# Name of this Makefile (used for "make depend").
-MAKEFILE = Makefile
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
-# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
-DEBUG = stabs
-
-OPT = s
-
-# Place -D or -U options here
-CDEFS = -DF_CPU=$(F_CPU)
-CXXDEFS = -DF_CPU=$(F_CPU)
-
-# Place -I options here
-CINCS = -I$(ARDUINO)
-CXXINCS = -I$(ARDUINO)
-
-# Compiler flag to set the C Standard level.
-# c89   - "ANSI" C
-# gnu89 - c89 plus GCC extensions
-# c99   - ISO C99 standard (not yet fully implemented)
-# gnu99 - c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-CDEBUG = -g$(DEBUG)
-CWARN = -Wall -Wstrict-prototypes
-CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
-#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
-
-CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CSTANDARD) $(CEXTRA)
-CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT)
-#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
-LDFLAGS = -lm
-
-
-# Programming support using avrdude. Settings and variables.
-AVRDUDE_PORT = $(PORT)
-AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex
-AVRDUDE_FLAGS = -V -F -C $(INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf \
--p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
--b $(UPLOAD_RATE)
-
-# Program settings
-CC = $(AVR_TOOLS_PATH)/avr-gcc
-CXX = $(AVR_TOOLS_PATH)/avr-g++
-OBJCOPY = $(AVR_TOOLS_PATH)/avr-objcopy
-OBJDUMP = $(AVR_TOOLS_PATH)/avr-objdump
-AR  = $(AVR_TOOLS_PATH)/avr-ar
-SIZE = $(AVR_TOOLS_PATH)/avr-size
-NM = $(AVR_TOOLS_PATH)/avr-nm
-AVRDUDE = $(AVR_TOOLS_PATH)/avrdude
-REMOVE = rm -f
-MV = mv -f
-
-# Define all object files.
-OBJ = $(SRC:.c=.o) $(CXXSRC:.cpp=.o) $(ASRC:.S=.o) 
-
-# Define all listing files.
-LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
-ALL_CXXFLAGS = -mmcu=$(MCU) -I. $(CXXFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-# Default target.
-all: applet_files build sizeafter
-
-build: elf hex 
-
-applet_files: $(TARGET).pde
-	# Here is the "preprocessing".
-	# It creates a .cpp file based with the same name as the .pde file.
-	# On top of the new .cpp file comes the WProgram.h header.
-	# At the end there is a generic main() function attached.
-	# Then the .cpp file will be compiled. Errors during compile will
-	# refer to this new, automatically generated, file. 
-	# Not the original .pde file you actually edit...
-	test -d applet || mkdir applet
-	echo '#include "WProgram.h"' > applet/$(TARGET).cpp
-	cat $(TARGET).pde >> applet/$(TARGET).cpp
-	cat $(ARDUINO)/main.cxx >> applet/$(TARGET).cpp
-
-elf: applet/$(TARGET).elf
-hex: applet/$(TARGET).hex
-eep: applet/$(TARGET).eep
-lss: applet/$(TARGET).lss 
-sym: applet/$(TARGET).sym
-
-# Program the device.  
-upload: applet/$(TARGET).hex
-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
-
-
-	# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex
-ELFSIZE = $(SIZE)  applet/$(TARGET).elf
-sizebefore:
-	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
-
-sizeafter:
-	@if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(HEXSIZE); echo; fi
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT=$(OBJCOPY) --debugging \
---change-section-address .data-0x800000 \
---change-section-address .bss-0x800000 \
---change-section-address .noinit-0x800000 \
---change-section-address .eeprom-0x810000 
-
-
-coff: applet/$(TARGET).elf
-	$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
-	$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof
-
-
-.SUFFIXES: .elf .hex .eep .lss .sym
-
-.elf.hex:
-	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-.elf.eep:
-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
-
-# Create extended listing file from ELF output file.
-.elf.lss:
-	$(OBJDUMP) -h -S $< > $@
-
-# Create a symbol table from ELF output file.
-.elf.sym:
-	$(NM) -n $< > $@
-
-	# Link: create ELF output file from library.
-applet/$(TARGET).elf: $(TARGET).pde applet/core.a 
-	$(CC) $(ALL_CFLAGS) -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
-
-applet/core.a: $(OBJ)
-	@for i in $(OBJ); do echo $(AR) rcs applet/core.a $$i; $(AR) rcs applet/core.a $$i; done
-
-
-
-# Compile: create object files from C++ source files.
-.cpp.o:
-	$(CXX) -c $(ALL_CXXFLAGS) $< -o $@ 
-
-# Compile: create object files from C source files.
-.c.o:
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
-
-
-# Compile: create assembler files from C source files.
-.c.s:
-	$(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-.S.o:
-	$(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Automatic dependencies
-%.d: %.c
-	$(CC) -M $(ALL_CFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@
-
-%.d: %.cpp
-	$(CXX) -M $(ALL_CXXFLAGS) $< | sed "s;$(notdir $*).o:;$*.o $*.d:;" > $@
-
-
-# Target: clean project.
-clean:
-	$(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
-	applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/core.a \
-	$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
-
-.PHONY:	all build elf hex eep lss sym program coff extcoff clean applet_files sizebefore sizeafter
-
-include $(SRC:.c=.d)
-include $(CXXSRC:.cpp=.d)
diff --git a/attiny45_85/cores/attiny45_85/Print.cpp b/attiny45_85/cores/attiny45_85/Print.cpp
deleted file mode 100755
index 74d0e5b..0000000
--- a/attiny45_85/cores/attiny45_85/Print.cpp
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- Print.cpp - Base class that provides print() and println()
- Copyright (c) 2008 David A. Mellis.  All right reserved.
- 
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
- 
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- Lesser General Public License for more details.
- 
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- 
- Modified 23 November 2006 by David A. Mellis
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <math.h>
-#include "wiring.h"
-
-#include "Print.h"
-
-// Public Methods //////////////////////////////////////////////////////////////
-
-/* default implementation: may be overridden */
-void Print::write(const char *str)
-{
-  while (*str)
-    write(*str++);
-}
-
-/* default implementation: may be overridden */
-void Print::write(const uint8_t *buffer, size_t size)
-{
-  while (size--)
-    write(*buffer++);
-}
-
-void Print::print(uint8_t b)
-{
-  this->write(b);
-}
-
-void Print::print(char c)
-{
-  print((byte) c);
-}
-
-void Print::print(const char str[])
-{
-  write(str);
-}
-
-void Print::print(int n)
-{
-  print((long) n);
-}
-
-void Print::print(unsigned int n)
-{
-  print((unsigned long) n);
-}
-
-void Print::print(long n)
-{
-  if (n < 0) {
-    print('-');
-    n = -n;
-  }
-  printNumber(n, 10);
-}
-
-void Print::print(unsigned long n)
-{
-  printNumber(n, 10);
-}
-
-void Print::print(long n, int base)
-{
-  if (base == 0)
-    print((char) n);
-  else if (base == 10)
-    print(n);
-  else
-    printNumber(n, base);
-}
-
-void Print::print(double n)
-{
-  printFloat(n, 2);
-}
-
-void Print::println(void)
-{
-  print('\r');
-  print('\n');  
-}
-
-void Print::println(char c)
-{
-  print(c);
-  println();  
-}
-
-void Print::println(const char c[])
-{
-  print(c);
-  println();
-}
-
-void Print::println(uint8_t b)
-{
-  print(b);
-  println();
-}
-
-void Print::println(int n)
-{
-  print(n);
-  println();
-}
-
-void Print::println(unsigned int n)
-{
-  print(n);
-  println();
-}
-
-void Print::println(long n)
-{
-  print(n);
-  println();  
-}
-
-void Print::println(unsigned long n)
-{
-  print(n);
-  println();  
-}
-
-void Print::println(long n, int base)
-{
-  print(n, base);
-  println();
-}
-
-void Print::println(double n)
-{
-  print(n);
-  println();
-}
-
-// Private Methods /////////////////////////////////////////////////////////////
-
-void Print::printNumber(unsigned long n, uint8_t base)
-{
-  unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. 
-  unsigned long i = 0;
-
-  if (n == 0) {
-    print('0');
-    return;
-  } 
-
-  while (n > 0) {
-    buf[i++] = n % base;
-    n /= base;
-  }
-
-  for (; i > 0; i--)
-    print((char) (buf[i - 1] < 10 ?
-      '0' + buf[i - 1] :
-      'A' + buf[i - 1] - 10));
-}
-
-void Print::printFloat(double number, uint8_t digits) 
-{ 
-  // Handle negative numbers
-  if (number < 0.0)
-  {
-     print('-');
-     number = -number;
-  }
-
-  // Round correctly so that print(1.999, 2) prints as "2.00"
-  double rounding = 0.5;
-  for (uint8_t i=0; i<digits; ++i)
-    rounding /= 10.0;
-  
-  number += rounding;
-
-  // Extract the integer part of the number and print it
-  unsigned long int_part = (unsigned long)number;
-  double remainder = number - (double)int_part;
-  print(int_part);
-
-  // Print the decimal point, but only if there are digits beyond
-  if (digits > 0)
-    print("."); 
-
-  // Extract digits from the remainder one at a time
-  while (digits-- > 0)
-  {
-    remainder *= 10.0;
-    int toPrint = int(remainder);
-    print(toPrint);
-    remainder -= toPrint; 
-  } 
-}
diff --git a/attiny45_85/cores/attiny45_85/Print.h b/attiny45_85/cores/attiny45_85/Print.h
deleted file mode 100755
index a69e85d..0000000
--- a/attiny45_85/cores/attiny45_85/Print.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
-  Print.h - Base class that provides print() and println()
-  Copyright (c) 2008 David A. Mellis.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-#ifndef Print_h
-#define Print_h
-
-#include <inttypes.h>
-#include <stdio.h> // for size_t
-
-#define DEC 10
-#define HEX 16
-#define OCT 8
-#define BIN 2
-#define BYTE 0
-
-class Print
-{
-  private:
-    void printNumber(unsigned long, uint8_t);
-    void printFloat(double, uint8_t);
-  public:
-    virtual void write(uint8_t) = 0;
-    virtual void write(const char *str);
-    virtual void write(const uint8_t *buffer, size_t size);
-    void print(char);
-    void print(const char[]);
-    void print(uint8_t);
-    void print(int);
-    void print(unsigned int);
-    void print(long);
-    void print(unsigned long);
-    void print(long, int);
-    void print(double);
-    void println(void);
-    void println(char);
-    void println(const char[]);
-    void println(uint8_t);
-    void println(int);
-    void println(unsigned int);
-    void println(long);
-    void println(unsigned long);
-    void println(long, int);
-    void println(double);
-};
-
-#endif
diff --git a/attiny45_85/cores/attiny45_85/WConstants.h b/attiny45_85/cores/attiny45_85/WConstants.h
deleted file mode 100755
index 3e19ac4..0000000
--- a/attiny45_85/cores/attiny45_85/WConstants.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "wiring.h"
diff --git a/attiny45_85/cores/attiny45_85/WInterrupts.c b/attiny45_85/cores/attiny45_85/WInterrupts.c
deleted file mode 100755
index 7067fa6..0000000
--- a/attiny45_85/cores/attiny45_85/WInterrupts.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
-
-/*
-  Part of the Wiring project - http://wiring.uniandes.edu.co
-
-  Copyright (c) 2004-05 Hernando Barragan
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-  
-  Modified 24 November 2006 by David A. Mellis
-
-  Modified 28-08-2009 for attiny84 R.Wiersma
-  Modified 09-10-2009 for attiny45 A.Saporetti
-*/
-
-#include <inttypes.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <avr/pgmspace.h>
-#include <stdio.h>
-
-#include "WConstants.h"
-#include "wiring_private.h"
-
-volatile static voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS];
-// volatile static voidFuncPtr twiIntFunc;
-
-#define EICRA MCUCR
-#define EIMSK GIMSK
-
-void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
-  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
-    intFunc[interruptNum] = userFunc;
-    
-    // Configure the interrupt mode (trigger on low input, any change, rising
-    // edge, or falling edge).  The mode constants were chosen to correspond
-    // to the configuration bits in the hardware register, so we simply shift
-    // the mode into place.
-      
-    // Enable the interrupt.
-
-    //only 1 interrupt
-    switch (interruptNum) {
-    case 0:
-      EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
-      EIMSK |= (1 << INT0);
-      break;
-    }
-  }
-}
-
-void detachInterrupt(uint8_t interruptNum) {
-  if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
-    // Disable the interrupt.  (We can't assume that interruptNum is equal
-    // to the number of the EIMSK bit to clear, as this isn't true on the 
-    // ATmega8.  There, INT0 is 6 and INT1 is 7.)
-
-    //only 1 interrupt
-    switch (interruptNum) {
-    case 0:
-      EIMSK &= ~(1 << INT0);
-      break;;
-    }
-      
-    intFunc[interruptNum] = 0;
-  }
-}
-
-//SIGNAL(EXT_INT0_vect) {
-ISR(INT0_vect) {
-  if(intFunc[EXTERNAL_INT_0])
-    intFunc[EXTERNAL_INT_0]();
-}
\ No newline at end of file
diff --git a/attiny45_85/cores/attiny45_85/WMath.cpp b/attiny45_85/cores/attiny45_85/WMath.cpp
deleted file mode 100755
index 2120c4c..0000000
--- a/attiny45_85/cores/attiny45_85/WMath.cpp
+++ /dev/null
@@ -1,60 +0,0 @@
-/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
-
-/*
-  Part of the Wiring project - http://wiring.org.co
-  Copyright (c) 2004-06 Hernando Barragan
-  Modified 13 August 2006, David A. Mellis for Arduino - http://www.arduino.cc/
-  
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-  
-  $Id$
-*/
-
-extern "C" {
-  #include "stdlib.h"
-}
-
-void randomSeed(unsigned int seed)
-{
-  if (seed != 0) {
-    srandom(seed);
-  }
-}
-
-long random(long howbig)
-{
-  if (howbig == 0) {
-    return 0;
-  }
-  return random() % howbig;
-}
-
-long random(long howsmall, long howbig)
-{
-  if (howsmall >= howbig) {
-    return howsmall;
-  }
-  long diff = howbig - howsmall;
-  return random(diff) + howsmall;
-}
-
-long map(long x, long in_min, long in_max, long out_min, long out_max)
-{
-  return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
-}
-
-unsigned int makeWord(unsigned int w) { return w; }
-unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; }
\ No newline at end of file
diff --git a/attiny45_85/cores/attiny45_85/WProgram.h b/attiny45_85/cores/attiny45_85/WProgram.h
deleted file mode 100755
index e3ab143..0000000
--- a/attiny45_85/cores/attiny45_85/WProgram.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef WProgram_h
-#define WProgram_h
-
-#include <stdlib.h>
-#include <string.h>
-#include <math.h>
-
-#include <avr/interrupt.h>
-
-#include "wiring.h"
-
-#ifdef __cplusplus
-//#include "HardwareSerial.h" // burp
-
-uint16_t makeWord(uint16_t w);
-uint16_t makeWord(byte h, byte l);
-
-#define word(...) makeWord(__VA_ARGS__)
-
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
-
-// WMath prototypes
-long random(long);
-long random(long, long);
-void randomSeed(unsigned int);
-long map(long, long, long, long, long);
-
-#endif
-
-#endif
\ No newline at end of file
diff --git a/attiny45_85/cores/attiny45_85/binary.h b/attiny45_85/cores/attiny45_85/binary.h
deleted file mode 100755
index af14980..0000000
--- a/attiny45_85/cores/attiny45_85/binary.h
+++ /dev/null
@@ -1,515 +0,0 @@
-#ifndef Binary_h
-#define Binary_h
-
-#define B0 0
-#define B00 0
-#define B000 0
-#define B0000 0
-#define B00000 0
-#define B000000 0
-#define B0000000 0
-#define B00000000 0
-#define B1 1
-#define B01 1
-#define B001 1
-#define B0001 1
-#define B00001 1
-#define B000001 1
-#define B0000001 1
-#define B00000001 1
-#define B10 2
-#define B010 2
-#define B0010 2
-#define B00010 2
-#define B000010 2
-#define B0000010 2
-#define B00000010 2
-#define B11 3
-#define B011 3
-#define B0011 3
-#define B00011 3
-#define B000011 3
-#define B0000011 3
-#define B00000011 3
-#define B100 4
-#define B0100 4
-#define B00100 4
-#define B000100 4
-#define B0000100 4
-#define B00000100 4
-#define B101 5
-#define B0101 5
-#define B00101 5
-#define B000101 5
-#define B0000101 5
-#define B00000101 5
-#define B110 6
-#define B0110 6
-#define B00110 6
-#define B000110 6
-#define B0000110 6
-#define B00000110 6
-#define B111 7
-#define B0111 7
-#define B00111 7
-#define B000111 7
-#define B0000111 7
-#define B00000111 7
-#define B1000 8
-#define B01000 8
-#define B001000 8
-#define B0001000 8
-#define B00001000 8
-#define B1001 9
-#define B01001 9
-#define B001001 9
-#define B0001001 9
-#define B00001001 9
-#define B1010 10
-#define B01010 10
-#define B001010 10
-#define B0001010 10
-#define B00001010 10
-#define B1011 11
-#define B01011 11
-#define B001011 11
-#define B0001011 11
-#define B00001011 11
-#define B1100 12
-#define B01100 12
-#define B001100 12
-#define B0001100 12
-#define B00001100 12
-#define B1101 13
-#define B01101 13
-#define B001101 13
-#define B0001101 13
-#define B00001101 13
-#define B1110 14
-#define B01110 14
-#define B001110 14
-#define B0001110 14
-#define B00001110 14
-#define B1111 15
-#define B01111 15
-#define B001111 15
-#define B0001111 15
-#define B00001111 15
-#define B10000 16
-#define B010000 16
-#define B0010000 16
-#define B00010000 16
-#define B10001 17
-#define B010001 17
-#define B0010001 17
-#define B00010001 17
-#define B10010 18
-#define B010010 18
-#define B0010010 18
-#define B00010010 18
-#define B10011 19
-#define B010011 19
-#define B0010011 19
-#define B00010011 19
-#define B10100 20
-#define B010100 20
-#define B0010100 20
-#define B00010100 20
-#define B10101 21
-#define B010101 21
-#define B0010101 21
-#define B00010101 21
-#define B10110 22
-#define B010110 22
-#define B0010110 22
-#define B00010110 22
-#define B10111 23
-#define B010111 23
-#define B0010111 23
-#define B00010111 23
-#define B11000 24
-#define B011000 24
-#define B0011000 24
-#define B00011000 24
-#define B11001 25
-#define B011001 25
-#define B0011001 25
-#define B00011001 25
-#define B11010 26
-#define B011010 26
-#define B0011010 26
-#define B00011010 26
-#define B11011 27
-#define B011011 27
-#define B0011011 27
-#define B00011011 27
-#define B11100 28
-#define B011100 28
-#define B0011100 28
-#define B00011100 28
-#define B11101 29
-#define B011101 29
-#define B0011101 29
-#define B00011101 29
-#define B11110 30
-#define B011110 30
-#define B0011110 30
-#define B00011110 30
-#define B11111 31
-#define B011111 31
-#define B0011111 31
-#define B00011111 31
-#define B100000 32
-#define B0100000 32
-#define B00100000 32
-#define B100001 33
-#define B0100001 33
-#define B00100001 33
-#define B100010 34
-#define B0100010 34
-#define B00100010 34
-#define B100011 35
-#define B0100011 35
-#define B00100011 35
-#define B100100 36
-#define B0100100 36
-#define B00100100 36
-#define B100101 37
-#define B0100101 37
-#define B00100101 37
-#define B100110 38
-#define B0100110 38
-#define B00100110 38
-#define B100111 39
-#define B0100111 39
-#define B00100111 39
-#define B101000 40
-#define B0101000 40
-#define B00101000 40
-#define B101001 41
-#define B0101001 41
-#define B00101001 41
-#define B101010 42
-#define B0101010 42
-#define B00101010 42
-#define B101011 43
-#define B0101011 43
-#define B00101011 43
-#define B101100 44
-#define B0101100 44
-#define B00101100 44
-#define B101101 45
-#define B0101101 45
-#define B00101101 45
-#define B101110 46
-#define B0101110 46
-#define B00101110 46
-#define B101111 47
-#define B0101111 47
-#define B00101111 47
-#define B110000 48
-#define B0110000 48
-#define B00110000 48
-#define B110001 49
-#define B0110001 49
-#define B00110001 49
-#define B110010 50
-#define B0110010 50
-#define B00110010 50
-#define B110011 51
-#define B0110011 51
-#define B00110011 51
-#define B110100 52
-#define B0110100 52
-#define B00110100 52
-#define B110101 53
-#define B0110101 53
-#define B00110101 53
-#define B110110 54
-#define B0110110 54
-#define B00110110 54
-#define B110111 55
-#define B0110111 55
-#define B00110111 55
-#define B111000 56
-#define B0111000 56
-#define B00111000 56
-#define B111001 57
-#define B0111001 57
-#define B00111001 57
-#define B111010 58
-#define B0111010 58
-#define B00111010 58
-#define B111011 59
-#define B0111011 59
-#define B00111011 59
-#define B111100 60
-#define B0111100 60
-#define B00111100 60
-#define B111101 61
-#define B0111101 61
-#define B00111101 61
-#define B111110 62
-#define B0111110 62
-#define B00111110 62
-#define B111111 63
-#define B0111111 63
-#define B00111111 63
-#define B1000000 64
-#define B01000000 64
-#define B1000001 65
-#define B01000001 65
-#define B1000010 66
-#define B01000010 66
-#define B1000011 67
-#define B01000011 67
-#define B1000100 68
-#define B01000100 68
-#define B1000101 69
-#define B01000101 69
-#define B1000110 70
-#define B01000110 70
-#define B1000111 71
-#define B01000111 71
-#define B1001000 72
-#define B01001000 72
-#define B1001001 73
-#define B01001001 73
-#define B1001010 74
-#define B01001010 74
-#define B1001011 75
-#define B01001011 75
-#define B1001100 76
-#define B01001100 76
-#define B1001101 77
-#define B01001101 77
-#define B1001110 78
-#define B01001110 78
-#define B1001111 79
-#define B01001111 79
-#define B1010000 80
-#define B01010000 80
-#define B1010001 81
-#define B01010001 81
-#define B1010010 82
-#define B01010010 82
-#define B1010011 83
-#define B01010011 83
-#define B1010100 84
-#define B01010100 84
-#define B1010101 85
-#define B01010101 85
-#define B1010110 86
-#define B01010110 86
-#define B1010111 87
-#define B01010111 87
-#define B1011000 88
-#define B01011000 88
-#define B1011001 89
-#define B01011001 89
-#define B1011010 90
-#define B01011010 90
-#define B1011011 91
-#define B01011011 91
-#define B1011100 92
-#define B01011100 92
-#define B1011101 93
-#define B01011101 93
-#define B1011110 94
-#define B01011110 94
-#define B1011111 95
-#define B01011111 95
-#define B1100000 96
-#define B01100000 96
-#define B1100001 97
-#define B01100001 97
-#define B1100010 98
-#define B01100010 98
-#define B1100011 99
-#define B01100011 99
-#define B1100100 100
-#define B01100100 100
-#define B1100101 101
-#define B01100101 101
-#define B1100110 102
-#define B01100110 102
-#define B1100111 103
-#define B01100111 103
-#define B1101000 104
-#define B01101000 104
-#define B1101001 105
-#define B01101001 105
-#define B1101010 106
-#define B01101010 106
-#define B1101011 107
-#define B01101011 107
-#define B1101100 108
-#define B01101100 108
-#define B1101101 109
-#define B01101101 109
-#define B1101110 110
-#define B01101110 110
-#define B1101111 111
-#define B01101111 111
-#define B1110000 112
-#define B01110000 112
-#define B1110001 113
-#define B01110001 113
-#define B1110010 114
-#define B01110010 114
-#define B1110011 115
-#define B01110011 115
-#define B1110100 116
-#define B01110100 116
-#define B1110101 117
-#define B01110101 117
-#define B1110110 118
-#define B01110110 118
-#define B1110111 119
-#define B01110111 119
-#define B1111000 120
-#define B01111000 120
-#define B1111001 121
-#define B01111001 121
-#define B1111010 122
-#define B01111010 122
-#define B1111011 123
-#define B01111011 123
-#define B1111100 124
-#define B01111100 124
-#define B1111101 125
-#define B01111101 125
-#define B1111110 126
-#define B01111110 126
-#define B1111111 127
-#define B01111111 127
-#define B10000000 128
-#define B10000001 129
-#define B10000010 130
-#define B10000011 131
-#define B10000100 132
-#define B10000101 133
-#define B10000110 134
-#define B10000111 135
-#define B10001000 136
-#define B10001001 137
-#define B10001010 138
-#define B10001011 139
-#define B10001100 140
-#define B10001101 141
-#define B10001110 142
-#define B10001111 143
-#define B10010000 144
-#define B10010001 145
-#define B10010010 146
-#define B10010011 147
-#define B10010100 148
-#define B10010101 149
-#define B10010110 150
-#define B10010111 151
-#define B10011000 152
-#define B10011001 153
-#define B10011010 154
-#define B10011011 155
-#define B10011100 156
-#define B10011101 157
-#define B10011110 158
-#define B10011111 159
-#define B10100000 160
-#define B10100001 161
-#define B10100010 162
-#define B10100011 163
-#define B10100100 164
-#define B10100101 165
-#define B10100110 166
-#define B10100111 167
-#define B10101000 168
-#define B10101001 169
-#define B10101010 170
-#define B10101011 171
-#define B10101100 172
-#define B10101101 173
-#define B10101110 174
-#define B10101111 175
-#define B10110000 176
-#define B10110001 177
-#define B10110010 178
-#define B10110011 179
-#define B10110100 180
-#define B10110101 181
-#define B10110110 182
-#define B10110111 183
-#define B10111000 184
-#define B10111001 185
-#define B10111010 186
-#define B10111011 187
-#define B10111100 188
-#define B10111101 189
-#define B10111110 190
-#define B10111111 191
-#define B11000000 192
-#define B11000001 193
-#define B11000010 194
-#define B11000011 195
-#define B11000100 196
-#define B11000101 197
-#define B11000110 198
-#define B11000111 199
-#define B11001000 200
-#define B11001001 201
-#define B11001010 202
-#define B11001011 203
-#define B11001100 204
-#define B11001101 205
-#define B11001110 206
-#define B11001111 207
-#define B11010000 208
-#define B11010001 209
-#define B11010010 210
-#define B11010011 211
-#define B11010100 212
-#define B11010101 213
-#define B11010110 214
-#define B11010111 215
-#define B11011000 216
-#define B11011001 217
-#define B11011010 218
-#define B11011011 219
-#define B11011100 220
-#define B11011101 221
-#define B11011110 222
-#define B11011111 223
-#define B11100000 224
-#define B11100001 225
-#define B11100010 226
-#define B11100011 227
-#define B11100100 228
-#define B11100101 229
-#define B11100110 230
-#define B11100111 231
-#define B11101000 232
-#define B11101001 233
-#define B11101010 234
-#define B11101011 235
-#define B11101100 236
-#define B11101101 237
-#define B11101110 238
-#define B11101111 239
-#define B11110000 240
-#define B11110001 241
-#define B11110010 242
-#define B11110011 243
-#define B11110100 244
-#define B11110101 245
-#define B11110110 246
-#define B11110111 247
-#define B11111000 248
-#define B11111001 249
-#define B11111010 250
-#define B11111011 251
-#define B11111100 252
-#define B11111101 253
-#define B11111110 254
-#define B11111111 255
-
-#endif
diff --git a/attiny45_85/cores/attiny45_85/main.cpp b/attiny45_85/cores/attiny45_85/main.cpp
deleted file mode 100644
index cc6e81d..0000000
--- a/attiny45_85/cores/attiny45_85/main.cpp
+++ /dev/null
@@ -1,14 +0,0 @@
-#include <WProgram.h>
-
-int main(void)
-{
-	init();
-
-	setup();
-    
-	for (;;)
-		loop();
-        
-	return 0;
-}
-
diff --git a/attiny45_85/cores/attiny45_85/main.cxx b/attiny45_85/cores/attiny45_85/main.cxx
deleted file mode 100755
index 52351e4..0000000
--- a/attiny45_85/cores/attiny45_85/main.cxx
+++ /dev/null
@@ -1,12 +0,0 @@
-int main(void)
-{
-	init();
-
-	setup();
-    
-	for (;;)
-		loop();
-        
-	return 0;
-}
-
diff --git a/attiny45_85/cores/attiny45_85/pins_arduino.h b/attiny45_85/cores/attiny45_85/pins_arduino.h
deleted file mode 100755
index 68925ab..0000000
--- a/attiny45_85/cores/attiny45_85/pins_arduino.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
-  pins_arduino.h - Pin definition functions for Arduino
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2007 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $
-
-  Modified 28-08-2009 for attiny84 R.Wiersma
-  Modified 14-108-2009 for attiny45 Saposoft
-*/
-
-#ifndef Pins_Arduino_h
-#define Pins_Arduino_h
-
-#include <avr/pgmspace.h>
-
-#define NOT_A_PIN 0
-#define NOT_A_PORT 0
-
-#define NOT_ON_TIMER 0
-#define TIMER0A 1
-#define TIMER0B 2
-#define TIMER1 3
-
-//changed it to uint16_t to uint8_t
-extern const uint8_t PROGMEM port_to_mode_PGM[];
-extern const uint8_t PROGMEM port_to_input_PGM[];
-extern const uint8_t PROGMEM port_to_output_PGM[];
-
-extern const uint8_t PROGMEM digital_pin_to_port_PGM[];
-// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];
-extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];
-extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];
-
-// Get the bit location within the hardware port of the given virtual pin.
-// This comes from the pins_*.c file for the active board configuration.
-// 
-// These perform slightly better as macros compared to inline functions
-//
-#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
-#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )
-#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )
-#define analogInPinToBit(P) (P)
-// in the following lines modified pgm_read_word in pgm_read_byte, word doesn't work on attiny45
-#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_output_PGM + (P))) )
-#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_input_PGM + (P))) )
-#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_byte( port_to_mode_PGM + (P))) )
-
-#endif
diff --git a/attiny45_85/cores/attiny45_85/wiring.c b/attiny45_85/cores/attiny45_85/wiring.c
deleted file mode 100755
index dda4830..0000000
--- a/attiny45_85/cores/attiny45_85/wiring.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
-  wiring.c - Partial implementation of the Wiring API for the ATmega8.
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2005-2006 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.c 585 2009-05-12 10:55:26Z dmellis $
-
-  Modified 28-08-2009 for attiny84 R.Wiersma
-  Modified 14-108-2009 for attiny45 Saposoft
-*/
-
-#include "wiring_private.h"
-
-// the prescaler is set so that timer0 ticks every 64 clock cycles, and the
-// the overflow handler is called every 256 ticks.
-#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256))
-
-// the whole number of milliseconds per timer0 overflow
-#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000)
-
-// the fractional number of milliseconds per timer0 overflow. we shift right
-// by three to fit these numbers into a byte. (for the clock speeds we care
-// about - 8 and 16 MHz - this doesn't lose precision.)
-#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3)
-#define FRACT_MAX (1000 >> 3)
-
-volatile unsigned long timer0_overflow_count = 0;
-volatile unsigned long timer0_millis = 0;
-static unsigned char timer0_fract = 0;
-
-//different name, TIMER0_OVF_vect to this
-SIGNAL(TIM0_OVF_vect)
-{
-	// copy these to local variables so they can be stored in registers
-	// (volatile variables must be read from memory on every access)
-	unsigned long m = timer0_millis;
-	unsigned char f = timer0_fract;
-
-	m += MILLIS_INC;
-	f += FRACT_INC;
-	if (f >= FRACT_MAX) {
-		f -= FRACT_MAX;
-		m += 1;
-	}
-
-	timer0_fract = f;
-	timer0_millis = m;
-	timer0_overflow_count++;
-}
-
-unsigned long millis()
-{
-	unsigned long m;
-	uint8_t oldSREG = SREG;
-
-	// disable interrupts while we read timer0_millis or we might get an
-	// inconsistent value (e.g. in the middle of a write to timer0_millis)
-	cli();
-	m = timer0_millis;
-	SREG = oldSREG;
-
-	return m;
-}
-
-unsigned long micros() {
-	unsigned long m, t;
-	uint8_t oldSREG = SREG;
-	
-	cli();	
-	t = TCNT0;
-  
-#ifdef TIFR0
-	if ((TIFR0 & _BV(TOV0)) && (t == 0))
-		t = 256;
-#else
-	if ((TIFR & _BV(TOV0)) && (t == 0))
-		t = 256;
-#endif
-
-	m = timer0_overflow_count;
-	SREG = oldSREG;
-	
-	return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond());
-}
-
-void delay(unsigned long ms)
-{
-	unsigned long start = millis();
-	
-	while (millis() - start <= ms)
-		;
-}
-
-/* Delay for the given number of microseconds.  Assumes a 8 or 16 MHz clock. 
- * Disables interrupts, which will disrupt the millis() function if used
- * too frequently. */
-void delayMicroseconds(unsigned int us)
-{
-	uint8_t oldSREG;
-
-	// calling avrlib's delay_us() function with low values (e.g. 1 or
-	// 2 microseconds) gives delays longer than desired.
-	//delay_us(us);
-
-#if F_CPU >= 16000000L
-	// for the 16 MHz clock on most Arduino boards
-
-	// for a one-microsecond delay, simply return.  the overhead
-	// of the function call yields a delay of approximately 1 1/8 us.
-	if (--us == 0)
-		return;
-
-	// the following loop takes a quarter of a microsecond (4 cycles)
-	// per iteration, so execute it four times for each microsecond of
-	// delay requested.
-	us <<= 2;
-
-	// account for the time taken in the preceeding commands.
-	us -= 2;
-#else
-	// for the 8 MHz internal clock on the ATmega168
-
-	// for a one- or two-microsecond delay, simply return.  the overhead of
-	// the function calls takes more than two microseconds.  can't just
-	// subtract two, since us is unsigned; we'd overflow.
-	if (--us == 0)
-		return;
-	if (--us == 0)
-		return;
-
-	// the following loop takes half of a microsecond (4 cycles)
-	// per iteration, so execute it twice for each microsecond of
-	// delay requested.
-	us <<= 1;
-    
-	// partially compensate for the time taken by the preceeding commands.
-	// we can't subtract any more than this or we'd overflow w/ small delays.
-	us--;
-#endif
-
-	// disable interrupts, otherwise the timer 0 overflow interrupt that
-	// tracks milliseconds will make us delay longer than we want.
-	oldSREG = SREG;
-	cli();
-
-	// busy wait
-	__asm__ __volatile__ (
-		"1: sbiw %0,1" "\n\t" // 2 cycles
-		"brne 1b" : "=w" (us) : "0" (us) // 2 cycles
-	);
-
-	// reenable interrupts.
-	SREG = oldSREG;
-}
-
-void init()
-{
-	// this needs to be called before setup() or some functions won't
-	// work there
-	sei();
-	
-/* dumpt everything, and only added the 2 timers the attiny has */
-	// on the ATmega168, timer 0 is also used for fast hardware pwm
-	// (using phase-correct PWM would mean that timer 0 overflowed half as often
-	// resulting in different millis() behavior on the ATmega8 and ATmega168)
-	sbi(TCCR0A, WGM01);
-	sbi(TCCR0A, WGM00);
-	// set timer 0 prescale factor to 64
-//	sbi(TCCR0B, CS02);
-	sbi(TCCR0B, CS01);
-	sbi(TCCR0B, CS00);
-	// enable timer 0 overflow interrupt
-	sbi(TIMSK, TOIE0);
-
-	// timers 1 are used for phase-correct hardware pwm
-	// this is better for motors as it ensures an even waveform
-	// note, however, that fast pwm mode can achieve a frequency of up
-	// 8 MHz (with a 16 MHz clock) at 50% duty cycle
-	// set timer 1 prescale factor to 64
-	sbi(TCCR1, CS11);
-	sbi(TCCR1, CS10);
-	sbi(TCCR1, PWM1A);
-	// put timer 1 in 8-bit phase correct pwm mode
-	// sbi(TCCR1, WGM10); non c'è nell attiny 45
-
-	// set a2d prescale factor to 128
-	// 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range.
-	// XXX: this will not work properly for other clock speeds, and
-	// this code should use F_CPU to determine the prescale factor.
-/* added F_CPU prescaler */
-#if F_CPU >= 16000000L //128
-	sbi(ADCSRA, ADPS2);
-	sbi(ADCSRA, ADPS1);
-	sbi(ADCSRA, ADPS0);
-#elif F_CPU >= 8000000L //64
-	sbi(ADCSRA, ADPS2);
-	sbi(ADCSRA, ADPS1);
-#else				//8
-	sbi(ADCSRA, ADPS1);
-	sbi(ADCSRA, ADPS0);
-#endif
-	// enable a2d conversions
-	sbi(ADCSRA, ADEN);
-}
\ No newline at end of file
diff --git a/attiny45_85/cores/attiny45_85/wiring.h b/attiny45_85/cores/attiny45_85/wiring.h
deleted file mode 100755
index f6abff4..0000000
--- a/attiny45_85/cores/attiny45_85/wiring.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
-  wiring.h - Partial implementation of the Wiring API for the ATmega8.
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2005-2006 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 602 2009-06-01 08:32:11Z dmellis $
-
-  Modified 28-08-2009 for attiny84 R.Wiersma
-  Modified 14-108-2009 for attiny45 Saposoft
-*/
-
-#ifndef Wiring_h
-#define Wiring_h
-
-#include <avr/io.h>
-#include "binary.h"
-
-#ifdef __cplusplus
-extern "C"{
-#endif
-
-#ifndef ARDUINO
-#define ARDUINO 18
-#endif
-
-#define HIGH 0x1
-#define LOW  0x0
-
-#define INPUT 0x0
-#define OUTPUT 0x1
-
-#define true 0x1
-#define false 0x0
-
-#define PI 3.1415926535897932384626433832795
-#define HALF_PI 1.5707963267948966192313216916398
-#define TWO_PI 6.283185307179586476925286766559
-#define DEG_TO_RAD 0.017453292519943295769236907684886
-#define RAD_TO_DEG 57.295779513082320876798154814105
-
-#define SERIAL  0x0
-#define DISPLAY 0x1
-
-#define LSBFIRST 0
-#define MSBFIRST 1
-
-// interrupts
-	// #define LOW  0x0
-#define CHANGE 1
-#define FALLING 2
-#define RISING 3
-// end interrupts
-	
-#define INTERNAL 3
-#define DEFAULT 1
-#define EXTERNAL 0
-
-// undefine stdlib's abs if encountered
-#ifdef abs
-#undef abs
-#endif
-
-#define min(a,b) ((a)<(b)?(a):(b))
-#define max(a,b) ((a)>(b)?(a):(b))
-#define abs(x) ((x)>0?(x):-(x))
-#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
-#define round(x)     ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
-#define radians(deg) ((deg)*DEG_TO_RAD)
-#define degrees(rad) ((rad)*RAD_TO_DEG)
-#define sq(x) ((x)*(x))
-
-#define interrupts() sei()
-#define noInterrupts() cli()
-
-#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
-#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
-#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
-
-#define lowByte(w) ((uint8_t) ((w) & 0xff))
-#define highByte(w) ((uint8_t) ((w) >> 8))
-
-#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
-#define bitSet(value, bit) ((value) |= (1UL << (bit)))
-#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
-#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
-
-typedef unsigned int word;
-
-#define bit(b) (1UL << (b))
-
-typedef uint8_t boolean;
-typedef uint8_t byte;
-
-void init(void);
-
-void pinMode(uint8_t, uint8_t);
-void digitalWrite(uint8_t, uint8_t);
-int digitalRead(uint8_t);
-int analogRead(uint8_t);
-void analogReference(uint8_t mode);
-void analogWrite(uint8_t, int);
-
-//No Serial to begin with
-//void beginSerial(long);
-//void serialWrite(unsigned char);
-//int serialAvailable(void);
-//int serialRead(void);
-//void serialFlush(void);
-
-unsigned long millis(void);
-unsigned long micros(void);
-void delay(unsigned long);
-void delayMicroseconds(unsigned int us);
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
-
-void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val);
-
-void attachInterrupt(uint8_t, void (*)(void), int mode);
-void detachInterrupt(uint8_t);
-
-void setup(void);
-void loop(void);
-
-#ifdef __cplusplus
-} // extern "C"
-#endif
-
-#endif
diff --git a/attiny45_85/cores/attiny45_85/wiring_analog.c b/attiny45_85/cores/attiny45_85/wiring_analog.c
deleted file mode 100755
index 9d87ccb..0000000
--- a/attiny45_85/cores/attiny45_85/wiring_analog.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
-  wiring_analog.c - analog input and output
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2005-2006 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
-
-  Modified 28-08-2009 for attiny84 R.Wiersma
-  Modified 14-108-2009 for attiny45 Saposoft
-*/
-
-#include "wiring_private.h"
-#include "pins_arduino.h"
-
-uint8_t analog_reference = DEFAULT;
-
-void analogReference(uint8_t mode)
-{
-	// can't actually set the register here because the default setting
-	// will connect AVCC and the AREF pin, which would cause a short if
-	// there's something connected to AREF.
-	analog_reference = mode;
-}
-
-int analogRead(uint8_t pin)
-{
-	uint8_t low, high;
-
-	// set the analog reference (high two bits of ADMUX) and select the
-	// channel (low 4 bits).  this also sets ADLAR (left-adjust result)
-	// to 0 (the default).
-//	ADMUX = (analog_reference << 6) | (pin & 0x3f); // more MUX
-// sapo per tiny45
-	ADMUX = pin & 0x3f;
-
-	// without a delay, we seem to read from the wrong channel
-	//delay(1);
-
-	// start the conversion
-	sbi(ADCSRA, ADSC);
-
-	// ADSC is cleared when the conversion finishes
-	while (bit_is_set(ADCSRA, ADSC));
-
-	// we have to read ADCL first; doing so locks both ADCL
-	// and ADCH until ADCH is read.  reading ADCL second would
-	// cause the results of each conversion to be discarded,
-	// as ADCL and ADCH would be locked when it completed.
-	low = ADCL;
-	high = ADCH;
-
-	// combine the two bytes
-	return (high << 8) | low;
-}
-
-// Right now, PWM output only works on the pins with
-// hardware support.  These are defined in the appropriate
-// pins_*.c file.  For the rest of the pins, we default
-// to digital output.
-void analogWrite(uint8_t pin, int val)
-{
-  // We need to make sure the PWM output is enabled for those pins
-  // that support it, as we turn it off when digitally reading or
-  // writing with them.  Also, make sure the pin is in output mode
-  // for consistenty with Wiring, which doesn't require a pinMode
-  // call for the analog output pins.
-  pinMode(pin, OUTPUT);
-
-  //Yep, only 2 PMW, Saposoft
-  	
-if (digitalPinToTimer(pin) == TIMER0A) {
-    if (val == 0) {
-	  digitalWrite(pin, LOW);
-    } else {
-	  // connect pwm to pin on timer 0, channel A
-	  sbi(TCCR0A, COM0A1);
-	  // set pwm duty
-	  OCR0A = val;      
-    }
-  } else if (digitalPinToTimer(pin) == TIMER1) {
-    if (val == 0) {
-	  digitalWrite(pin, LOW);
-    } else {
-	  // connect pwm to pin on timer 0, channel B
-	  sbi(TCCR1, COM1A1);
-	  // set pwm duty
-	  OCR1A = val;
-    }
-  }  else if (val < 128)
-    digitalWrite(pin, LOW);
-  else
-    digitalWrite(pin, HIGH);
-}
diff --git a/attiny45_85/cores/attiny45_85/wiring_digital.c b/attiny45_85/cores/attiny45_85/wiring_digital.c
deleted file mode 100755
index 9d3ae27..0000000
--- a/attiny45_85/cores/attiny45_85/wiring_digital.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
-  wiring_digital.c - digital input and output functions
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2005-2006 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
-
-  Modified 28-08-2009 for attiny84 R.Wiersma
-  Modified 14-108-2009 for attiny45 Saposoft
-*/
-
-#include "wiring_private.h"
-#include "pins_arduino.h"
-
-void pinMode(uint8_t pin, uint8_t mode)
-{
-	uint8_t bit = digitalPinToBitMask(pin);
-	uint8_t port = digitalPinToPort(pin);
-	volatile uint8_t *reg;
-
-	if (port == NOT_A_PIN) return;
-
-	// JWS: can I let the optimizer do this?
-	reg = portModeRegister(port);
-
-	if (mode == INPUT) *reg &= ~bit;
-	else *reg |= bit;
-}
-
-// Forcing this inline keeps the callers from having to push their own stuff
-// on the stack. It is a good performance win and only takes 1 more byte per
-// user than calling. (It will take more bytes on the 168.)
-//
-// But shouldn't this be moved into pinMode? Seems silly to check and do on
-// each digitalread or write.
-//
-//Only 2 PWM's
-static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline));
-static inline void turnOffPWM(uint8_t timer)
-{
-	if (timer == TIMER1) cbi(TCCR1, COM1A1);
-	if (timer == TIMER1) cbi(TCCR1, COM1B1);
-	if (timer == TIMER0A) cbi(TCCR0A, COM0A1);
-	if (timer == TIMER0B) cbi(TCCR0A, COM0B1);
-	if (timer == TIMER0A) cbi(TCCR0A, COM0A0);
-	if (timer == TIMER0B) cbi(TCCR0A, COM0B0);
-}
-
-void digitalWrite(uint8_t pin, uint8_t val)
-{
-	uint8_t timer = digitalPinToTimer(pin);
-	uint8_t bit = digitalPinToBitMask(pin);
-	uint8_t port = digitalPinToPort(pin);
-	volatile uint8_t *out;
-
-	if (port == NOT_A_PIN) return;
-
-	// If the pin that support PWM output, we need to turn it off
-	// before doing a digital write.
-	if (timer != NOT_ON_TIMER) turnOffPWM(timer);
-
-	out = portOutputRegister(port);
-
-	if (val == LOW) *out &= ~bit;
-	else *out |= bit;
-}
-
-int digitalRead(uint8_t pin)
-{
-	uint8_t timer = digitalPinToTimer(pin);
-	uint8_t bit = digitalPinToBitMask(pin);
-	uint8_t port = digitalPinToPort(pin);
-
-	if (port == NOT_A_PIN) return LOW;
-
-	// If the pin that support PWM output, we need to turn it off
-	// before getting a digital reading.
-	if (timer != NOT_ON_TIMER) turnOffPWM(timer);
-
-	if (*portInputRegister(port) & bit) return HIGH;
-	return LOW;
-}
diff --git a/attiny45_85/cores/attiny45_85/wiring_private.h b/attiny45_85/cores/attiny45_85/wiring_private.h
deleted file mode 100755
index 70ba9d0..0000000
--- a/attiny45_85/cores/attiny45_85/wiring_private.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
-  wiring_private.h - Internal header file.
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2005-2006 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $
-
-  Modified 28-08-2009 for attiny84 R.Wiersma
-*/
-
-#ifndef WiringPrivate_h
-#define WiringPrivate_h
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <avr/delay.h>
-#include <stdio.h>
-#include <stdarg.h>
-
-#include "wiring.h"
-
-#ifdef __cplusplus
-extern "C"{
-#endif
-
-#ifndef cbi
-#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
-#endif
-#ifndef sbi
-#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
-#endif
-
-//Who needs more interrupts?
-#define EXTERNAL_INT_0 0
-
-#define EXTERNAL_NUM_INTERRUPTS 1
-
-typedef void (*voidFuncPtr)(void);
-
-#ifdef __cplusplus
-} // extern "C"
-#endif
-
-#endif
diff --git a/attiny45_85/cores/attiny45_85/wiring_pulse.c b/attiny45_85/cores/attiny45_85/wiring_pulse.c
deleted file mode 100755
index 8f232f1..0000000
--- a/attiny45_85/cores/attiny45_85/wiring_pulse.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
-  wiring_pulse.c - pulseIn() function
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2005-2006 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
-*/
-
-#include "wiring_private.h"
-#include "pins_arduino.h"
-
-/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH
- * or LOW, the type of pulse to measure.  Works on pulses from 2-3 microseconds
- * to 3 minutes in length, but must be called at least a few dozen microseconds
- * before the start of the pulse. */
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout)
-{
-	// cache the port and bit of the pin in order to speed up the
-	// pulse width measuring loop and achieve finer resolution.  calling
-	// digitalRead() instead yields much coarser resolution.
-	uint8_t bit = digitalPinToBitMask(pin);
-	uint8_t port = digitalPinToPort(pin);
-	uint8_t stateMask = (state ? bit : 0);
-	unsigned long width = 0; // keep initialization out of time critical area
-	
-	// convert the timeout from microseconds to a number of times through
-	// the initial loop; it takes 16 clock cycles per iteration.
-	unsigned long numloops = 0;
-	unsigned long maxloops = microsecondsToClockCycles(timeout) / 16;
-	
-	// wait for any previous pulse to end
-	while ((*portInputRegister(port) & bit) == stateMask)
-		if (numloops++ == maxloops)
-			return 0;
-	
-	// wait for the pulse to start
-	while ((*portInputRegister(port) & bit) != stateMask)
-		if (numloops++ == maxloops)
-			return 0;
-	
-	// wait for the pulse to stop
-	while ((*portInputRegister(port) & bit) == stateMask)
-		width++;
-
-	// convert the reading to microseconds. The loop has been determined
-	// to be 10 clock cycles long and have about 16 clocks between the edge
-	// and the start of the loop. There will be some error introduced by
-	// the interrupt handlers.
-	return clockCyclesToMicroseconds(width * 10 + 16); 
-}
diff --git a/attiny45_85/cores/attiny45_85/wiring_shift.c b/attiny45_85/cores/attiny45_85/wiring_shift.c
deleted file mode 100755
index 956f864..0000000
--- a/attiny45_85/cores/attiny45_85/wiring_shift.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-  wiring_shift.c - shiftOut() function
-  Part of Arduino - http://www.arduino.cc/
-
-  Copyright (c) 2005-2006 David A. Mellis
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General
-  Public License along with this library; if not, write to the
-  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA  02111-1307  USA
-
-  $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $
-*/
-
-#include "wiring_private.h"
-
-void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, byte val)
-{
-	int i;
-
-	for (i = 0; i < 8; i++)  {
-		if (bitOrder == LSBFIRST)
-			digitalWrite(dataPin, !!(val & (1 << i)));
-		else	
-			digitalWrite(dataPin, !!(val & (1 << (7 - i))));
-			
-		digitalWrite(clockPin, HIGH);
-		digitalWrite(clockPin, LOW);		
-	}
-}