bind/bin/tests/system/nsupdate/tests.sh

#!/bin/sh
#
# Copyright (C) 2004, 2007, 2009, 2010  Internet Systems Consortium, Inc. ("ISC")
# Copyright (C) 2000, 2001  Internet Software Consortium.
#
# Permission to use, copy, modify, and/or distribute this software for any
# purpose with or without fee is hereby granted, provided that the above
# copyright notice and this permission notice appear in all copies.
#
# THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH
# REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT,
# INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
# LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
# PERFORMANCE OF THIS SOFTWARE.

# $Id: tests.sh,v 1.32 2010/12/07 02:53:34 marka Exp $

SYSTEMTESTTOP=..
. $SYSTEMTESTTOP/conf.sh

status=0
n=0

# wait for zone transfer to complete
tries=0
while true; do
    if [ $tries -eq 10 ]
    then
        exit 1
    fi

    if grep "example.nil/IN.*Transfer completed" ns2/named.run > /dev/null
    then
        break
    else
        echo "I:zones are not fully loaded, waiting..."
        tries=`expr $tries + 1`
        sleep 1
    fi
done

echo "I:fetching first copy of zone before update"
$DIG +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\
	@10.53.0.1 axfr -p 5300 > dig.out.ns1 || status=1

echo "I:fetching second copy of zone before update"
$DIG +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\
	@10.53.0.2 axfr -p 5300 > dig.out.ns2 || status=1

echo "I:comparing pre-update copies to known good data"
$PERL ../digcomp.pl knowngood.ns1.before dig.out.ns1 || status=1
$PERL ../digcomp.pl knowngood.ns1.before dig.out.ns2 || status=1

echo "I:updating zone"
# nsupdate will print a ">" prompt to stdout as it gets each input line.
$NSUPDATE -k ns1/ddns.key <<END > /dev/null || status=1
server 10.53.0.1 5300
update add updated.example.nil. 600 A 10.10.10.1
update add updated.example.nil. 600 TXT Foo
update delete t.example.nil.

END
echo "I:sleeping 5 seconds for server to incorporate changes"
sleep 5

echo "I:fetching first copy of zone after update"
$DIG +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\
	@10.53.0.1 axfr -p 5300 > dig.out.ns1 || status=1

echo "I:fetching second copy of zone after update"
$DIG +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\
	@10.53.0.2 axfr -p 5300 > dig.out.ns2 || status=1

echo "I:comparing post-update copies to known good data"
$PERL ../digcomp.pl knowngood.ns1.after dig.out.ns1 || status=1
$PERL ../digcomp.pl knowngood.ns1.after dig.out.ns2 || status=1

echo "I:testing local update policy"
pre=`$DIG +short new.other.nil. @10.53.0.1 a -p 5300` || status=1
[ -z "$pre" ] || status=1

echo "I:updating zone"
# nsupdate will print a ">" prompt to stdout as it gets each input line.
$NSUPDATE -l -p 5300 -k ns1/session.key > /dev/null <<END || status=1
zone other.nil.
update add new.other.nil. 600 IN A 10.10.10.1
send
END

echo "I:sleeping 5 seconds for server to incorporate changes"
sleep 5

echo "I:checking result of update"
post=`$DIG +short new.other.nil. @10.53.0.1 a -p 5300` || status=1
[ "$post" = "10.10.10.1" ] || status=1

echo "I:comparing post-update copy to known good data"
$PERL ../digcomp.pl knowngood.ns1.after dig.out.ns1 || status=1

echo "I:testing zone consistency checks"
# inserting an NS record without a corresponding A or AAAA record should fail
$NSUPDATE -l -p 5300 -k ns1/session.key > nsupdate.out 2>&1 << END && status=1
update add other.nil. 600 in ns ns3.other.nil.
send
END
grep REFUSED nsupdate.out > /dev/null 2>&1 || status=1
# ...but should work if an A record is inserted first:
$NSUPDATE -l -p 5300 -k ns1/session.key > nsupdate.out 2>&1 << END || status=1
update add ns4.other.nil 600 in a 10.53.0.1
send
update add other.nil. 600 in ns ns4.other.nil.
send
END
grep REFUSED nsupdate.out > /dev/null 2>&1 && status=1
# ...or if an AAAA record does:
$NSUPDATE -l -p 5300 -k ns1/session.key > nsupdate.out 2>&1 << END || status=1
update add ns5.other.nil 600 in aaaa 2001:db8::1
send
update add other.nil. 600 in ns ns5.other.nil.
send
END
grep REFUSED nsupdate.out > /dev/null 2>&1 && status=1
# ...or if the NS and A/AAAA are inserted together:
$NSUPDATE -l -p 5300 -k ns1/session.key > nsupdate.out 2>&1 << END || status=1
update add other.nil. 600 in ns ns6.other.nil.
update add ns6.other.nil 600 in a 10.53.0.1
send
END
grep REFUSED nsupdate.out > /dev/null 2>&1 && status=1

echo "I:sleeping 5 seconds for server to incorporate changes"
sleep 5

echo "I:checking result of update"
$DIG +short @10.53.0.1 -p 5300 ns other.nil > dig.out.ns1 || status=1
grep ns3.other.nil dig.out.ns1 > /dev/null 2>&1 && status=1
grep ns4.other.nil dig.out.ns1 > /dev/null 2>&1 || status=1
grep ns5.other.nil dig.out.ns1 > /dev/null 2>&1 || status=1
grep ns6.other.nil dig.out.ns1 > /dev/null 2>&1 || status=1


if $PERL -e 'use Net::DNS;' 2>/dev/null
then
    echo "I:running update.pl test"
    $PERL update_test.pl -s 10.53.0.1 -p 5300 update.nil. || status=1
else
    echo "I:The second part of this test requires the Net::DNS library." >&2
fi

echo "I:fetching first copy of test zone"
$DIG +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\
	@10.53.0.1 axfr -p 5300 > dig.out.ns1 || status=1

echo "I:fetching second copy of test zone"
$DIG +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\
	@10.53.0.2 axfr -p 5300 > dig.out.ns2 || status=1

echo "I:comparing zones"
$PERL ../digcomp.pl dig.out.ns1 dig.out.ns2 || status=1

echo "I:SIGKILL and restart server ns1"
cd ns1
kill -KILL `cat named.pid`
rm named.pid
cd ..
sleep 10
if 
	$PERL $SYSTEMTESTTOP/start.pl --noclean . ns1
then
	echo "I:restarted server ns1"	
else
	echo "I:could not restart server ns1"
	exit 1
fi
sleep 10

echo "I:fetching ns1 after hard restart"
$DIG +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\
	@10.53.0.1 axfr -p 5300 > dig.out.ns1.after || status=1

echo "I:comparing zones"
$PERL ../digcomp.pl dig.out.ns1 dig.out.ns1.after || status=1

echo "I:begin RT #482 regression test"

echo "I:update master"
$NSUPDATE -k ns1/ddns.key <<END > /dev/null || status=1
server 10.53.0.1 5300
update add updated2.example.nil. 600 A 10.10.10.2
update add updated2.example.nil. 600 TXT Bar
update delete c.example.nil.
send
END

sleep 5

echo "I:SIGHUP slave"
kill -HUP `cat ns2/named.pid`

sleep 5

echo "I:update master again"
$NSUPDATE -k ns1/ddns.key <<END > /dev/null || status=1
server 10.53.0.1 5300
update add updated3.example.nil. 600 A 10.10.10.3
update add updated3.example.nil. 600 TXT Zap
update delete d.example.nil.
send
END

sleep 5

echo "I:SIGHUP slave again"
kill -HUP `cat ns2/named.pid`

sleep 5

if grep "out of sync" ns2/named.run
then
	status=1
fi

echo "I:end RT #482 regression test"

n=`expr $n + 1`
echo "I:start NSEC3PARAM changes via UPDATE on a unsigned zone test ($n)"
ret=0
$NSUPDATE << EOF
server 10.53.0.3 5300
update add example 3600 nsec3param 1 0 0 -
send
EOF

sleep 1

# the zone is not signed.  The nsec3param records should be removed.
# this also proves that the server is still running.
$DIG +tcp +noadd +nosea +nostat +noquest +nocmd +norec example.\
	@10.53.0.3 nsec3param -p 5300 > dig.out.ns3.$n || ret=1
grep "ANSWER: 0" dig.out.ns3.$n > /dev/null || ret=1
grep "flags:[^;]* aa[ ;]" dig.out.ns3.$n > /dev/null || ret=1
if [ $ret != 0 ] ; then echo "I: failed"; status=`expr $ret + $status`; fi

n=`expr $n + 1`
echo "I:change the NSEC3PARAM ttl via update ($n)"
ret=0
$NSUPDATE << EOF
server 10.53.0.3 5300
update add nsec3param.test 3600 NSEC3PARAM 1 0 1 -
send
EOF

sleep 1

$DIG +tcp +noadd +nosea +nostat +noquest +nocmd +norec nsec3param.test.\
        @10.53.0.3 nsec3param -p 5300 > dig.out.ns3.$n || ret=1
grep "ANSWER: 1" dig.out.ns3.$n > /dev/null || ret=1
grep "3600.*NSEC3PARAM" dig.out.ns3.$n > /dev/null || ret=1
grep "flags:[^;]* aa[ ;]" dig.out.ns3.$n > /dev/null || ret=1
if [ $ret != 0 ] ; then echo "I: failed"; status=`expr $ret + $status`; fi

n=`expr $n + 1`
echo "I:add a new the NSEC3PARAM via update ($n)"
ret=0
$NSUPDATE << EOF
server 10.53.0.3 5300
update add nsec3param.test 3600 NSEC3PARAM 1 0 4 -
send
EOF

sleep 1

$DIG +tcp +noadd +nosea +nostat +noquest +nocmd +norec nsec3param.test.\
        @10.53.0.3 nsec3param -p 5300 > dig.out.ns3.$n || ret=1
grep "ANSWER: 2" dig.out.ns3.$n > /dev/null || ret=1
grep "NSEC3PARAM 1 0 4 -" dig.out.ns3.$n > /dev/null || ret=1
grep "flags:[^;]* aa[ ;]" dig.out.ns3.$n > /dev/null || ret=1
if [ $ret != 0 ] ; then echo "I: failed"; status=`expr $ret + $status`; fi

n=`expr $n + 1`
echo "I:add, delete and change the ttl of the NSEC3PARAM rrset via update ($n)"
ret=0
$NSUPDATE << EOF
server 10.53.0.3 5300
update delete nsec3param.test NSEC3PARAM
update add nsec3param.test 7200 NSEC3PARAM 1 0 5 -
send
EOF

sleep 1

$DIG +tcp +noadd +nosea +nostat +noquest +nocmd +norec nsec3param.test.\
        @10.53.0.3 nsec3param -p 5300 > dig.out.ns3.$n || ret=1
grep "ANSWER: 1" dig.out.ns3.$n > /dev/null || ret=1
grep "7200.*NSEC3PARAM 1 0 5 -" dig.out.ns3.$n > /dev/null || ret=1
grep "flags:[^;]* aa[ ;]" dig.out.ns3.$n > /dev/null || ret=1
$JOURNALPRINT ns3/nsec3param.test.db.signed.jnl > jp.out.ns3.$n
# intermediate TTL changes.
grep "add nsec3param.test.	7200	IN	NSEC3PARAM 1 0 4 -" jp.out.ns3.$n > /dev/null || ret=1
grep "add nsec3param.test.	7200	IN	NSEC3PARAM 1 0 1 -" jp.out.ns3.$n > /dev/null || ret=1
# delayed adds and deletes.
grep "add nsec3param.test.	0	IN	TYPE65534 .# 6 000180000500" jp.out.ns3.$n > /dev/null || ret=1
grep "add nsec3param.test.	0	IN	TYPE65534 .# 6 000140000100" jp.out.ns3.$n > /dev/null || ret=1
grep "add nsec3param.test.	0	IN	TYPE65534 .# 6 000140000400" jp.out.ns3.$n > /dev/null || ret=1
if [ $ret != 0 ] ; then echo "I: failed"; status=`expr $ret + $status`; fi



echo "I:testing that rndc stop updates the master file"
$NSUPDATE -k ns1/ddns.key <<END > /dev/null || status=1
server 10.53.0.1 5300
update add updated4.example.nil. 600 A 10.10.10.3
send
END
$PERL $SYSTEMTESTTOP/stop.pl --use-rndc . ns1
# Removing the journal file and restarting the server means
# that the data served by the new server process are exactly
# those dumped to the master file by "rndc stop".
rm -f ns1/*jnl
$PERL $SYSTEMTESTTOP/start.pl --noclean . ns1
$DIG +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd updated4.example.nil.\
	@10.53.0.1 a -p 5300 > dig.out.ns1 || status=1
$PERL ../digcomp.pl knowngood.ns1.afterstop dig.out.ns1 || status=1

ret=0
echo "I:check that 'nsupdate -l' with a missing keyfile reports the missing file"
$NSUPDATE -l -p 5300 -k ns1/nonexistant.key 2> nsupdate.out < /dev/null
grep ns1/nonexistant.key nsupdate.out > /dev/null || ret=1
if test $ret -ne 0
then
echo "I:failed"; status=1
fi


echo "I:exit status: $status"
exit $status