Split out named-compilezone and named-checkzone man pages

Both utilities were included as one man page, but this caused a problem:
Sphinx directive .. include was used twice on the same file, which
prevented us from using labels (or anything with unique identifier) in
the man pages. This effectivelly prevented linking to them.

Splitting man pages allows us to solve the linking problems and also
clearly make text easier to follow because it does not mention two tools
at the same time.

This change causes duplication of text, but given the frequecy of changes
to these tools I think it is acceptable. I've considered deduplication
using smaller .rst snippets which get included into both man pages,
but it would require more sed scripting to handle defaults etc. and
I think it would be way too complex solution for this problem.

Related: #2799

bin/check/named-checkzone.rst

@@ -11,16 +11,18 @@
 
 .. highlight: console
 
-named-checkzone, named-compilezone - zone file validity checking or converting tool
+.. BEWARE: Do not forget to edit also named-compilezone.rst!
------------------------------------------------------------------------------------
+
+.. _man_named-checkzone:
+
+named-checkzone - zone file validation tool
+-------------------------------------------
 
 Synopsis
 ~~~~~~~~
 
 :program:`named-checkzone` [**-d**] [**-h**] [**-j**] [**-q**] [**-v**] [**-c** class] [**-f** format] [**-F** format] [**-J** filename] [**-i** mode] [**-k** mode] [**-m** mode] [**-M** mode] [**-n** mode] [**-l** ttl] [**-L** serial] [**-o** filename] [**-r** mode] [**-s** style] [**-S** mode] [**-t** directory] [**-T** mode] [**-w** directory] [**-D**] [**-W** mode] {zonename} {filename}
 
-:program:`named-compilezone` [**-d**] [**-j**] [**-q**] [**-v**] [**-c** class] [**-C** mode] [**-f** format] [**-F** format] [**-J** filename] [**-i** mode] [**-k** mode] [**-m** mode] [**-n** mode] [**-l** ttl] [**-L** serial] [**-r** mode] [**-s** style] [**-t** directory] [**-T** mode] [**-w** directory] [**-D**] [**-W** mode] {**-o** filename} {zonename} {filename}
-
 Description
 ~~~~~~~~~~~
 
@@ -29,13 +31,6 @@ performs the same checks as ``named`` does when loading a zone. This
 makes ``named-checkzone`` useful for checking zone files before
 configuring them into a name server.
 
-``named-compilezone`` is similar to ``named-checkzone``, but it always
-dumps the zone contents to a specified file in a specified format.
-It also applies stricter check levels by default, since the
-dump output is used as an actual zone file loaded by ``named``.
-When manually specified otherwise, the check levels must at least be as
-strict as those specified in the ``named`` configuration file.
-
 Options
 ~~~~~~~
 
@@ -108,8 +103,7 @@ Options
 
 ``-k mode``
    This option performs ``check-names`` checks with the specified failure mode.
-   Possible modes are ``fail`` (the default for ``named-compilezone``),
+   Possible modes are ``fail``, ``warn`` (the default), and ``ignore``.
-   ``warn`` (the default for ``named-checkzone``), and ``ignore``.
 
 ``-l ttl``
    This option sets a maximum permissible TTL for the input file. Any record with a
@@ -132,13 +126,11 @@ Options
 
 ``-n mode``
    This option specifies whether NS records should be checked to see if they are
-   addresses. Possible modes are ``fail`` (the default for
+   addresses. Possible modes are ``fail``, ``warn`` (the default), and ``ignore``.
-   ``named-compilezone``), ``warn`` (the default for ``named-checkzone``),
-   and ``ignore``.
 
 ``-o filename``
    This option writes the zone output to ``filename``. If ``filename`` is ``-``, then
-   the zone output is written to standard output. This is mandatory for ``named-compilezone``.
+   the zone output is written to standard output.
 
 ``-r mode``
    This option checks for records that are treated as different by DNSSEC but are
@@ -150,9 +142,9 @@ Options
    ``full`` (the default) and ``relative``. The ``full`` format is most
    suitable for processing automatically by a separate script.
    The relative format is more human-readable and is thus
-   suitable for editing by hand. For ``named-checkzone``, this does not
+   suitable for editing by hand. This does not have any effect unless it dumps
-   have any effect unless it dumps the zone contents. It also does not
+   the zone contents. It also does not have any meaning if the output format
-   have any meaning if the output format is not text.
+   is not text.
 
 ``-S mode``
    This option checks whether an SRV record refers to a CNAME. Possible modes are
@@ -174,8 +166,7 @@ Options
    ``named.conf``.
 
 ``-D``
-   This option dumps the zone file in canonical format. This is always enabled for
+   This option dumps the zone file in canonical format.
-   ``named-compilezone``.
 
 ``-W mode``
    This option specifies whether to check for non-terminal wildcards. Non-terminal
@@ -198,5 +189,5 @@ and 0 otherwise.
 See Also
 ~~~~~~~~
 
-:manpage:`named(8)`, :manpage:`named-checkconf(8)`, :rfc:`1035`, BIND 9 Administrator Reference
+:manpage:`named(8)`, :manpage:`named-checkconf(8)`, :manpage:`named-compilezone(8)`,
-Manual.
+:rfc:`1035`, BIND 9 Administrator Reference Manual.

bin/check/named-compilezone.rst

@@ -0,0 +1,195 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0.  If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. highlight: console
+
+.. BEWARE: Do not forget to edit also named-checkzone.rst!
+
+.. _man_named-compilezone:
+
+named-compilezone - zone file converting tool
+---------------------------------------------
+
+Synopsis
+~~~~~~~~
+
+:program:`named-compilezone` [**-d**] [**-h**] [**-j**] [**-q**] [**-v**] [**-c** class] [**-f** format] [**-F** format] [**-J** filename] [**-i** mode] [**-k** mode] [**-m** mode] [**-M** mode] [**-n** mode] [**-l** ttl] [**-L** serial] [**-r** mode] [**-s** style] [**-S** mode] [**-t** directory] [**-T** mode] [**-w** directory] [**-D**] [**-W** mode] {**-o** filename} {zonename} {filename}
+
+Description
+~~~~~~~~~~~
+
+``named-compilezone`` checks the syntax and integrity of a zone file,
+and dumps the zone contents to a specified file in a specified format.
+It applies strict check levels by default, since the
+dump output is used as an actual zone file loaded by ``named``.
+When manually specified otherwise, the check levels must at least be as
+strict as those specified in the ``named`` configuration file.
+
+Options
+~~~~~~~
+
+``-d``
+   This option enables debugging.
+
+``-h``
+   This option prints the usage summary and exits.
+
+``-q``
+   This option sets quiet mode, which only sets an exit code to indicate
+   successful or failed completion.
+
+``-v``
+   This option prints the version of the ``named-checkzone`` program and exits.
+
+``-j``
+   When loading a zone file, this option tells ``named`` to read the journal if it exists. The journal
+   file name is assumed to be the zone file name with the
+   string ``.jnl`` appended.
+
+``-J filename``
+   When loading the zone file, this option tells ``named`` to read the journal from the given file, if
+   it exists. This implies ``-j``.
+
+``-c class``
+   This option specifies the class of the zone. If not specified, ``IN`` is assumed.
+
+``-i mode``
+   This option performs post-load zone integrity checks. Possible modes are
+   ``full`` (the default), ``full-sibling``, ``local``,
+   ``local-sibling``, and ``none``.
+
+   Mode ``full`` checks that MX records refer to A or AAAA records
+   (both in-zone and out-of-zone hostnames). Mode ``local`` only
+   checks MX records which refer to in-zone hostnames.
+
+   Mode ``full`` checks that SRV records refer to A or AAAA records
+   (both in-zone and out-of-zone hostnames). Mode ``local`` only
+   checks SRV records which refer to in-zone hostnames.
+
+   Mode ``full`` checks that delegation NS records refer to A or AAAA
+   records (both in-zone and out-of-zone hostnames). It also checks that
+   glue address records in the zone match those advertised by the child.
+   Mode ``local`` only checks NS records which refer to in-zone
+   hostnames or verifies that some required glue exists, i.e., when the
+   name server is in a child zone.
+
+   Modes ``full-sibling`` and ``local-sibling`` disable sibling glue
+   checks, but are otherwise the same as ``full`` and ``local``,
+   respectively.
+
+   Mode ``none`` disables the checks.
+
+``-f format``
+   This option specifies the format of the zone file. Possible formats are
+   ``text`` (the default), and ``raw``.
+
+``-F format``
+   This option specifies the format of the output file specified. For
+   ``named-checkzone``, this does not have any effect unless it dumps
+   the zone contents.
+
+   Possible formats are ``text`` (the default), which is the standard
+   textual representation of the zone, and ``raw`` and ``raw=N``, which
+   store the zone in a binary format for rapid loading by ``named``.
+   ``raw=N`` specifies the format version of the raw zone file: if ``N`` is
+   0, the raw file can be read by any version of ``named``; if N is 1, the
+   file can only be read by release 9.9.0 or higher. The default is 1.
+
+``-k mode``
+   This option performs ``check-names`` checks with the specified failure mode.
+   Possible modes are ``fail`` (the default), ``warn``, and ``ignore``.
+
+``-l ttl``
+   This option sets a maximum permissible TTL for the input file. Any record with a
+   TTL higher than this value causes the zone to be rejected. This
+   is similar to using the ``max-zone-ttl`` option in ``named.conf``.
+
+``-L serial``
+   When compiling a zone to ``raw`` format, this option sets the "source
+   serial" value in the header to the specified serial number. This is
+   expected to be used primarily for testing purposes.
+
+``-m mode``
+   This option specifies whether MX records should be checked to see if they are
+   addresses. Possible modes are ``fail``, ``warn`` (the default), and
+   ``ignore``.
+
+``-M mode``
+   This option checks whether a MX record refers to a CNAME. Possible modes are
+   ``fail``, ``warn`` (the default), and ``ignore``.
+
+``-n mode``
+   This option specifies whether NS records should be checked to see if they are
+   addresses. Possible modes are ``fail`` (the default), ``warn``,  and
+   ``ignore``.
+
+``-o filename``
+   This option writes the zone output to ``filename``. If ``filename`` is ``-``, then
+   the zone output is written to standard output. This is mandatory for ``named-compilezone``.
+
+``-r mode``
+   This option checks for records that are treated as different by DNSSEC but are
+   semantically equal in plain DNS. Possible modes are ``fail``,
+   ``warn`` (the default), and ``ignore``.
+
+``-s style``
+   This option specifies the style of the dumped zone file. Possible styles are
+   ``full`` (the default) and ``relative``. The ``full`` format is most
+   suitable for processing automatically by a separate script.
+   The relative format is more human-readable and is thus
+   suitable for editing by hand.
+
+``-S mode``
+   This option checks whether an SRV record refers to a CNAME. Possible modes are
+   ``fail``, ``warn`` (the default), and ``ignore``.
+
+``-t directory``
+   This option tells ``named`` to chroot to ``directory``, so that ``include`` directives in the
+   configuration file are processed as if run by a similarly chrooted
+   ``named``.
+
+``-T mode``
+   This option checks whether Sender Policy Framework (SPF) records exist and issues a
+   warning if an SPF-formatted TXT record is not also present. Possible
+   modes are ``warn`` (the default) and ``ignore``.
+
+``-w directory``
+   This option instructs ``named`` to chdir to ``directory``, so that relative filenames in master file
+   ``$INCLUDE`` directives work. This is similar to the directory clause in
+   ``named.conf``.
+
+``-D``
+   This option dumps the zone file in canonical format. This is always enabled for
+   ``named-compilezone``.
+
+``-W mode``
+   This option specifies whether to check for non-terminal wildcards. Non-terminal
+   wildcards are almost always the result of a failure to understand the
+   wildcard matching algorithm (:rfc:`1034`). Possible modes are ``warn``
+   (the default) and ``ignore``.
+
+``zonename``
+   This indicates the domain name of the zone being checked.
+
+``filename``
+   This is the name of the zone file.
+
+Return Values
+~~~~~~~~~~~~~
+
+``named-compilezone`` returns an exit status of 1 if errors were detected
+and 0 otherwise.
+
+See Also
+~~~~~~~~
+
+:manpage:`named(8)`, :manpage:`named-checkconf(8)`, :manpage:`named-checkzone(8)`,
+:rfc:`1035`, BIND 9 Administrator Reference Manual.

doc/arm/manpages.rst

@@ -31,8 +31,8 @@ Manual Pages
 .. include:: ../../bin/dig/host.rst
 .. include:: ../../bin/tools/mdig.rst
 .. include:: ../../bin/check/named-checkconf.rst
-.. _man_named-checkzone_named-compilezone:
 .. include:: ../../bin/check/named-checkzone.rst
+.. include:: ../../bin/check/named-compilezone.rst
 .. include:: ../../bin/tools/named-journalprint.rst
 .. include:: ../../bin/tools/named-nzd2nzf.rst
 .. include:: ../../bin/tools/named-rrchecker.rst

doc/man/named-checkzone.1in

@@ -33,21 +33,12 @@ named-checkzone \- zone file validity checking or converting tool
 .SH SYNOPSIS
 .sp
 \fBnamed\-checkzone\fP [\fB\-d\fP] [\fB\-h\fP] [\fB\-j\fP] [\fB\-q\fP] [\fB\-v\fP] [\fB\-c\fP class] [\fB\-f\fP format] [\fB\-F\fP format] [\fB\-J\fP filename] [\fB\-i\fP mode] [\fB\-k\fP mode] [\fB\-m\fP mode] [\fB\-M\fP mode] [\fB\-n\fP mode] [\fB\-l\fP ttl] [\fB\-L\fP serial] [\fB\-o\fP filename] [\fB\-r\fP mode] [\fB\-s\fP style] [\fB\-S\fP mode] [\fB\-t\fP directory] [\fB\-T\fP mode] [\fB\-w\fP directory] [\fB\-D\fP] [\fB\-W\fP mode] {zonename} {filename}
-.sp
-\fBnamed\-compilezone\fP [\fB\-d\fP] [\fB\-j\fP] [\fB\-q\fP] [\fB\-v\fP] [\fB\-c\fP class] [\fB\-C\fP mode] [\fB\-f\fP format] [\fB\-F\fP format] [\fB\-J\fP filename] [\fB\-i\fP mode] [\fB\-k\fP mode] [\fB\-m\fP mode] [\fB\-n\fP mode] [\fB\-l\fP ttl] [\fB\-L\fP serial] [\fB\-r\fP mode] [\fB\-s\fP style] [\fB\-t\fP directory] [\fB\-T\fP mode] [\fB\-w\fP directory] [\fB\-D\fP] [\fB\-W\fP mode] {\fB\-o\fP filename} {zonename} {filename}
 .SH DESCRIPTION
 .sp
 \fBnamed\-checkzone\fP checks the syntax and integrity of a zone file. It
 performs the same checks as \fBnamed\fP does when loading a zone. This
 makes \fBnamed\-checkzone\fP useful for checking zone files before
 configuring them into a name server.
-.sp
-\fBnamed\-compilezone\fP is similar to \fBnamed\-checkzone\fP, but it always
-dumps the zone contents to a specified file in a specified format.
-It also applies stricter check levels by default, since the
-dump output is used as an actual zone file loaded by \fBnamed\fP\&.
-When manually specified otherwise, the check levels must at least be as
-strict as those specified in the \fBnamed\fP configuration file.
 .SH OPTIONS
 .INDENT 0.0
 .TP
@@ -120,8 +111,7 @@ file can only be read by release 9.9.0 or higher. The default is 1.
 .TP
 .B \fB\-k mode\fP
 This option performs \fBcheck\-names\fP checks with the specified failure mode.
-Possible modes are \fBfail\fP (the default for \fBnamed\-compilezone\fP),
+Possible modes are \fBfail\fP, \fBwarn\fP (the default), and \fBignore\fP\&.
-\fBwarn\fP (the default for \fBnamed\-checkzone\fP), and \fBignore\fP\&.
 .TP
 .B \fB\-l ttl\fP
 This option sets a maximum permissible TTL for the input file. Any record with a
@@ -144,13 +134,11 @@ This option checks whether a MX record refers to a CNAME. Possible modes are
 .TP
 .B \fB\-n mode\fP
 This option specifies whether NS records should be checked to see if they are
-addresses. Possible modes are \fBfail\fP (the default for
+addresses. Possible modes are \fBfail\fP, \fBwarn\fP (the default), and \fBignore\fP\&.
-\fBnamed\-compilezone\fP), \fBwarn\fP (the default for \fBnamed\-checkzone\fP),
-and \fBignore\fP\&.
 .TP
 .B \fB\-o filename\fP
 This option writes the zone output to \fBfilename\fP\&. If \fBfilename\fP is \fB\-\fP, then
-the zone output is written to standard output. This is mandatory for \fBnamed\-compilezone\fP\&.
+the zone output is written to standard output.
 .TP
 .B \fB\-r mode\fP
 This option checks for records that are treated as different by DNSSEC but are
@@ -162,9 +150,9 @@ This option specifies the style of the dumped zone file. Possible styles are
 \fBfull\fP (the default) and \fBrelative\fP\&. The \fBfull\fP format is most
 suitable for processing automatically by a separate script.
 The relative format is more human\-readable and is thus
-suitable for editing by hand. For \fBnamed\-checkzone\fP, this does not
+suitable for editing by hand. This does not have any effect unless it dumps
-have any effect unless it dumps the zone contents. It also does not
+the zone contents. It also does not have any meaning if the output format
-have any meaning if the output format is not text.
+is not text.
 .TP
 .B \fB\-S mode\fP
 This option checks whether an SRV record refers to a CNAME. Possible modes are
@@ -186,8 +174,7 @@ This option instructs \fBnamed\fP to chdir to \fBdirectory\fP, so that relative
 \fBnamed.conf\fP\&.
 .TP
 .B \fB\-D\fP
-This option dumps the zone file in canonical format. This is always enabled for
+This option dumps the zone file in canonical format.
-\fBnamed\-compilezone\fP\&.
 .TP
 .B \fB\-W mode\fP
 This option specifies whether to check for non\-terminal wildcards. Non\-terminal
@@ -207,8 +194,8 @@ This is the name of the zone file.
 and 0 otherwise.
 .SH SEE ALSO
 .sp
-\fBnamed(8)\fP, \fBnamed\-checkconf(8)\fP, \fI\%RFC 1035\fP, BIND 9 Administrator Reference
+\fBnamed(8)\fP, \fBnamed\-checkconf(8)\fP, \fBnamed\-compilezone(8)\fP,
-Manual.
+\fI\%RFC 1035\fP, BIND 9 Administrator Reference Manual.
 .SH AUTHOR
 Internet Systems Consortium
 .SH COPYRIGHT

doc/man/named-compilezone.1in

@@ -32,19 +32,12 @@ level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
 named-compilezone \- zone file validity checking or converting tool
 .SH SYNOPSIS
 .sp
-\fBnamed\-checkzone\fP [\fB\-d\fP] [\fB\-h\fP] [\fB\-j\fP] [\fB\-q\fP] [\fB\-v\fP] [\fB\-c\fP class] [\fB\-f\fP format] [\fB\-F\fP format] [\fB\-J\fP filename] [\fB\-i\fP mode] [\fB\-k\fP mode] [\fB\-m\fP mode] [\fB\-M\fP mode] [\fB\-n\fP mode] [\fB\-l\fP ttl] [\fB\-L\fP serial] [\fB\-o\fP filename] [\fB\-r\fP mode] [\fB\-s\fP style] [\fB\-S\fP mode] [\fB\-t\fP directory] [\fB\-T\fP mode] [\fB\-w\fP directory] [\fB\-D\fP] [\fB\-W\fP mode] {zonename} {filename}
+\fBnamed\-compilezone\fP [\fB\-d\fP] [\fB\-h\fP] [\fB\-j\fP] [\fB\-q\fP] [\fB\-v\fP] [\fB\-c\fP class] [\fB\-f\fP format] [\fB\-F\fP format] [\fB\-J\fP filename] [\fB\-i\fP mode] [\fB\-k\fP mode] [\fB\-m\fP mode] [\fB\-M\fP mode] [\fB\-n\fP mode] [\fB\-l\fP ttl] [\fB\-L\fP serial] [\fB\-r\fP mode] [\fB\-s\fP style] [\fB\-S\fP mode] [\fB\-t\fP directory] [\fB\-T\fP mode] [\fB\-w\fP directory] [\fB\-D\fP] [\fB\-W\fP mode] {\fB\-o\fP filename} {zonename} {filename}
-.sp
-\fBnamed\-compilezone\fP [\fB\-d\fP] [\fB\-j\fP] [\fB\-q\fP] [\fB\-v\fP] [\fB\-c\fP class] [\fB\-C\fP mode] [\fB\-f\fP format] [\fB\-F\fP format] [\fB\-J\fP filename] [\fB\-i\fP mode] [\fB\-k\fP mode] [\fB\-m\fP mode] [\fB\-n\fP mode] [\fB\-l\fP ttl] [\fB\-L\fP serial] [\fB\-r\fP mode] [\fB\-s\fP style] [\fB\-t\fP directory] [\fB\-T\fP mode] [\fB\-w\fP directory] [\fB\-D\fP] [\fB\-W\fP mode] {\fB\-o\fP filename} {zonename} {filename}
 .SH DESCRIPTION
 .sp
-\fBnamed\-checkzone\fP checks the syntax and integrity of a zone file. It
+\fBnamed\-compilezone\fP checks the syntax and integrity of a zone file,
-performs the same checks as \fBnamed\fP does when loading a zone. This
+and dumps the zone contents to a specified file in a specified format.
-makes \fBnamed\-checkzone\fP useful for checking zone files before
+It applies strict check levels by default, since the
-configuring them into a name server.
-.sp
-\fBnamed\-compilezone\fP is similar to \fBnamed\-checkzone\fP, but it always
-dumps the zone contents to a specified file in a specified format.
-It also applies stricter check levels by default, since the
 dump output is used as an actual zone file loaded by \fBnamed\fP\&.
 When manually specified otherwise, the check levels must at least be as
 strict as those specified in the \fBnamed\fP configuration file.
@@ -120,8 +113,7 @@ file can only be read by release 9.9.0 or higher. The default is 1.
 .TP
 .B \fB\-k mode\fP
 This option performs \fBcheck\-names\fP checks with the specified failure mode.
-Possible modes are \fBfail\fP (the default for \fBnamed\-compilezone\fP),
+Possible modes are \fBfail\fP (the default), \fBwarn\fP, and \fBignore\fP\&.
-\fBwarn\fP (the default for \fBnamed\-checkzone\fP), and \fBignore\fP\&.
 .TP
 .B \fB\-l ttl\fP
 This option sets a maximum permissible TTL for the input file. Any record with a
@@ -144,9 +136,8 @@ This option checks whether a MX record refers to a CNAME. Possible modes are
 .TP
 .B \fB\-n mode\fP
 This option specifies whether NS records should be checked to see if they are
-addresses. Possible modes are \fBfail\fP (the default for
+addresses. Possible modes are \fBfail\fP (the default), \fBwarn\fP,  and
-\fBnamed\-compilezone\fP), \fBwarn\fP (the default for \fBnamed\-checkzone\fP),
+\fBignore\fP\&.
-and \fBignore\fP\&.
 .TP
 .B \fB\-o filename\fP
 This option writes the zone output to \fBfilename\fP\&. If \fBfilename\fP is \fB\-\fP, then
@@ -162,9 +153,7 @@ This option specifies the style of the dumped zone file. Possible styles are
 \fBfull\fP (the default) and \fBrelative\fP\&. The \fBfull\fP format is most
 suitable for processing automatically by a separate script.
 The relative format is more human\-readable and is thus
-suitable for editing by hand. For \fBnamed\-checkzone\fP, this does not
+suitable for editing by hand.
-have any effect unless it dumps the zone contents. It also does not
-have any meaning if the output format is not text.
 .TP
 .B \fB\-S mode\fP
 This option checks whether an SRV record refers to a CNAME. Possible modes are
@@ -203,12 +192,12 @@ This is the name of the zone file.
 .UNINDENT
 .SH RETURN VALUES
 .sp
-\fBnamed\-checkzone\fP returns an exit status of 1 if errors were detected
+\fBnamed\-compilezone\fP returns an exit status of 1 if errors were detected
 and 0 otherwise.
 .SH SEE ALSO
 .sp
-\fBnamed(8)\fP, \fBnamed\-checkconf(8)\fP, \fI\%RFC 1035\fP, BIND 9 Administrator Reference
+\fBnamed(8)\fP, \fBnamed\-checkconf(8)\fP, \fBnamed\-checkzone(8)\fP,
-Manual.
+\fI\%RFC 1035\fP, BIND 9 Administrator Reference Manual.
 .SH AUTHOR
 Internet Systems Consortium
 .SH COPYRIGHT

doc/man/named-compilezone.rst

@@ -11,4 +11,4 @@
 
 :orphan:
 
-.. include:: ../../bin/check/named-checkzone.rst
+.. include:: ../../bin/check/named-compilezone.rst