mir/bind
2
0
Fork 0
mirror of https://gitlab.isc.org/isc-projects/bind9 synced 2025-08-30 05:57:52 +00:00
Code Issues Releases Wiki Activity

Update system test documentation

Browse Source 
Rewrite and reorganize the test documentation to focus on the pytest
runner, omit any mentions of the legacy runner which are no longer
relevant, and mention a few pytest tricks.
This commit is contained in:
Tom Krizek 2023-11-06 14:45:07 +01:00
parent 3e26d99c3c
commit fba295600b
No known key found for this signature in database
GPG Key ID: 01623B9B652A20A7
2 changed files with 470 additions and 793 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

793
bin/tests/system/README
View File

@ -1,793 +0,0 @@
Copyright (C) Internet Systems Consortium, Inc. ("ISC")
SPDX-License-Identifier: MPL-2.0
This Source Code Form is subject to the terms of the Mozilla Public
License, v. 2.0. If a copy of the MPL was not distributed with this
file, you can obtain one at https://mozilla.org/MPL/2.0/.
See the COPYRIGHT file distributed with this work for additional
information regarding copyright ownership.
Introduction
===
This directory holds a simple test environment for running bind9 system tests
involving multiple name servers.
Each system test directory holds a set of scripts and configuration files to
test different parts of BIND. The directories are named for the aspect of BIND
they test, for example:
dnssec/ DNSSEC tests
forward/ Forwarding tests
glue/ Glue handling tests
etc.
A system test directory must start with an alphabetic character and may not
contain any special characters. Only hyphen may be used as a word separator.
Typically each set of tests sets up 2-5 name servers and then performs one or
more tests against them. Within the test subdirectory, each name server has a
separate subdirectory containing its configuration data. These subdirectories
are named "nsN" or "ansN" (where N is a number between 1 and 8, e.g. ns1, ans2
etc.)
The tests are completely self-contained and do not require access to the real
DNS. Generally, one of the test servers (usually ns1) is set up as a root
nameserver and is listed in the hints file of the others.
Preparing to Run the Tests
===
To enable all servers to run on the same machine, they bind to separate virtual
IP addresses on the loopback interface. ns1 runs on 10.53.0.1, ns2 on
10.53.0.2, etc. Before running any tests, you must set up these addresses by
running the command
sh ifconfig.sh up
as root. The interfaces can be removed by executing the command:
sh ifconfig.sh down
... also as root.
The servers use unprivileged ports (above 1024) instead of the usual port 53,
so they can be run without root privileges once the interfaces have been set
up.
Note for MacOS Users
---
If you wish to make the interfaces survive across reboots, copy
org.isc.bind.system and org.isc.bind.system.plist to /Library/LaunchDaemons
then run
launchctl load /Library/LaunchDaemons/org.isc.bind.system.plist
... as root.
Running the System Tests with pytest
===
The pytest system test runner is currently in development, but it is the
recommended way to run tests. Please report issues to QA.
Running an Individual Test
---
pytest -k <test-name>
Note that in comparison to the legacy test runner, some additional tests might
be picked up when specifying just the system test directory name. To check
which tests will be executed, you can use the `--collect-only` option. You
might also be able to find a more specific test name to provide to ensure only
your desired test is executed. See help for `-k` option in `pytest --help` for
more info.
It is also possible to run a single individual pytest test case. For example,
you can use the name test_sslyze_dot to execute just the test_sslyze_dot()
function from doth/tests_sslyze.py. The entire needed setup and teardown will
be handled by the framework.
Running All the System Tests
---
Issuing plain `pytest` command without any argument will execute all tests
sequenatially. To execute them in parallel, ensure you have pytest-xdist
installed and run:
pytest -n <number-of-workers>
Running the System Tests Using the Legacy Runner
===
!!! WARNING !!!
---
The legacy way to run system tests is currently being reworked into a pytest
system test runner described in the previous section. The contents of this
section might be out of date and no longer applicable. Please try and use the
pytest runner if possible and report issues and missing features.
Running an Individual Test
---
The tests can be run individually using the following command:
sh legacy.run.sh [flags] <test-name> [<test-arguments>]
e.g.
sh legacy.run.sh [flags] notify
Optional flags are:
-k Keep servers running after the test completes. Each test
usually starts a number of nameservers, either instances
of the "named" being tested, or custom servers (written in
Python or Perl) that feature test-specific behavior. The
servers are automatically started before the test is run
and stopped after it ends. This flag leaves them running
at the end of the test, so that additional queries can be
sent by hand. To stop the servers afterwards, use the
command "sh stop.sh <test-name>".
-n Noclean - do not remove the output files if the test
completes successfully. By default, files created by the
test are deleted if it passes; they are not deleted if the
test fails.
-p <number> Sets the range of ports used by the test. A block of 100
ports is available for each test, the number given to the
"-p" switch being the number of the start of that block
(e.g. "-p 7900" will mean that the test is able to use
ports 7900 through 7999). If not specified, the test will
have ports 5000 to 5099 available to it.
Arguments are:
test-name Mandatory. The name of the test, which is the name of the
subdirectory in bin/tests/system holding the test files.
test-arguments Optional arguments that are passed to each of the test's
scripts.
Running All The System Tests
---
To run all the system tests, enter the command:
make [-j numproc] test
The optional "numproc" argument specifies the maximum number of tests that can
run in parallel. The default is 1, which means that all of the tests run
sequentially. If greater than 1, up to "numproc" tests will run simultaneously,
new tests being started as tests finish. Each test will get a unique set of
ports, so there is no danger of tests interfering with one another. Parallel
running will reduce the total time taken to run the BIND system tests, but will
mean that the output from all the tests sent to the screen will be mixed up
with one another.
In this case, retention of the output files after a test completes successfully
is specified by setting the environment variable SYSTEMTEST_NO_CLEAN to 1 prior
to running make, e.g.
SYSTEMTEST_NO_CLEAN=1 make [-j numproc] test
while setting environment variable SYSTEMTEST_FORCE_COLOR to 1 forces system
test output to be printed in color.
Format of Test Output
---
All output from the system tests is in the form of lines with the following
structure:
<letter>:<test-name>:<message> [(<number>)]
e.g.
I:catz:checking that dom1.example is not served by primary (1)
The meanings of the fields are as follows:
<letter>
This indicates the type of message. This is one of:
S Start of the test
A Start of test (retained for backwards compatibility)
T Start of test (retained for backwards compatibility)
E End of the test
I Information. A test will typically output many of these messages
during its run, indicating test progress. Note that such a message may
be of the form "I:testname:failed", indicating that a sub-test has
failed.
R Result. Each test will result in one such message, which is of the
form:
R:<test-name>:<result>
where <result> is one of:
PASS The test passed
FAIL The test failed
SKIPPED The test was not run, usually because some
prerequisites required to run the test are missing.
<test-name>
This is the name of the test from which the message emanated, which is also the
name of the subdirectory holding the test files.
<message>
This is text output by the test during its execution.
(<number>)
If present, this will correlate with a file created by the test. The tests
execute commands and route the output of each command to a file. The name of
this file depends on the command and the test, but will usually be of the form:
<command>.out.<suffix><number>
e.g. nsupdate.out.test28, dig.out.q3. This aids diagnosis of problems by
allowing the output that caused the problem message to be identified.
Re-Running the Tests
---
If there is a requirement to re-run a test (or the entire test suite), the
files produced by the tests should be deleted first. Normally, these files are
deleted if the test succeeds but are retained on error. The legacy.run.sh
script automatically calls a given test's clean.sh script before invoking its
setup.sh script.
Deletion of the files produced by the set of tests (e.g. after the execution of
make) can be carried out using the command:
sh cleanall.sh
or
make testclean
(Note that the Makefile has two other targets for cleaning up files: "clean"
will delete all the files produced by the tests, as well as the object and
executable files used by the tests. "distclean" does all the work of "clean"
as well as deleting configuration files produced by "configure".)
Developer Notes
===
This section is intended for developers writing new tests.
Overview
---
As noted above, each test is in a separate directory. To interact with the
test framework, the directories contain the following standard files:
prereq.sh Run at the beginning to determine whether the test can be run at
all; if not, we see a R:SKIPPED result. This file is optional:
if not present, the test is assumed to have all its prerequisites
met.
setup.sh Run after prereq.sh, this sets up the preconditions for the tests.
Although optional, virtually all tests will require such a file to
set up the ports they should use for the test.
tests.sh Runs the actual tests. This file is mandatory.
tests_sh_xyz.py A glue file for the pytest runner for executing shell tests.
clean.sh Run at the end to clean up temporary files, but only if the test
was completed successfully and its running was not inhibited by the
"-n" switch being passed to "legacy.run.sh". Otherwise the
temporary files are left in place for inspection.
ns<N> These subdirectories contain test name servers that can be queried
or can interact with each other. The value of N indicates the
address the server listens on: for example, ns2 listens on
10.53.0.2, and ns4 on 10.53.0.4. All test servers use an
unprivileged port, so they don't need to run as root. These
servers log at the highest debug level and the log is captured in
the file "named.run".
ans<N> Like ns[X], but these are simple mock name servers implemented in
Perl or Python. They are generally programmed to misbehave in ways
named would not so as to exercise named's ability to interoperate
with badly behaved name servers.
Port Usage
---
In order for the tests to run in parallel, each test requires a unique set of
ports. These are specified by the "-p" option passed to "legacy.run.sh", which
sets environment variables that the scripts listed above can reference.
The convention used in the system tests is that the number passed is the start
of a range of 100 ports. The test is free to use the ports as required,
although the first ten ports in the block are named and generally tests use the
named ports for their intended purpose. The names of the environment variables
are:
PORT Number to be used for the query port.
CONTROLPORT Number to be used as the RNDC control port.
EXTRAPORT1 - EXTRAPORT8 Eight port numbers that can be used as needed.
Two other environment variables are defined:
LOWPORT The lowest port number in the range.
HIGHPORT The highest port number in the range.
Since port ranges usually start on a boundary of 10, the variables are set such
that the last digit of the port number corresponds to the number of the
EXTRAPORTn variable. For example, if the port range were to start at 5200, the
port assignments would be:
PORT = 5200
EXTRAPORT1 = 5201
:
EXTRAPORT8 = 5208
CONTROLPORT = 5209
LOWPORT = 5200
HIGHPORT = 5299
When running tests in parallel (i.e. giving a value of "numproc" greater than 1
in the "make" command listed above), it is guaranteed that each
test will get a set of unique port numbers.
Writing a Test
---
The test framework requires up to four shell scripts (listed above) as well as
a number of nameserver instances to run. Certain expectations are put on each
script:
General
---
1. Each of the four scripts will be invoked with the command
(cd <test-directory> ; sh <script> [<arguments>] )
... so that working directory when the script starts executing is the test
directory.
2. Arguments can be only passed to the script if the test is being run as a
one-off with "legacy.run.sh". In this case, everything on the command line
after the name of the test is passed to each script. For example, the command:
sh legacy.run.sh -p 12300 mytest -D xyz
... will run "mytest" with a port range of 12300 to 12399. Each of the
framework scripts provided by the test will be invoked using the remaining
arguments, e.g.:
(cd mytest ; sh prereq.sh -D xyz)
(cd mytest ; sh setup.sh -D xyz)
(cd mytest ; sh tests.sh -D xyz)
(cd mytest ; sh clean.sh -D xyz)
No arguments will be passed to the test scripts if the test is run as part of
a run of the full test suite (e.g. the tests are started with make).
3. Each script should start with the following lines:
. ../conf.sh
"conf.sh" defines a series of environment variables together with functions
useful for the test scripts.
prereq.sh
---
As noted above, this is optional. If present, it should check whether specific
software needed to run the test is available and/or whether BIND has been
configured with the appropriate options required.
* If the software required to run the test is present and the BIND
configure options are correct, prereq.sh should return with a status code
of 0.
* If the software required to run the test is not available and/or BIND
has not been configured with the appropriate options, prereq.sh should
return with a status code of 1.
* If there is some other problem (e.g. prerequisite software is available
but is not properly configured), a status code of 255 should be returned.
setup.sh
---
This is responsible for setting up the configuration files used in the test.
To cope with the varying port number, ports are not hard-coded into
configuration files (or, for that matter, scripts that emulate nameservers).
Instead, setup.sh is responsible for editing the configuration files to set the
port numbers.
To do this, configuration files should be supplied in the form of templates
containing tokens identifying ports. The tokens have the same name as the
environment variables listed above, but are prefixed and suffixed by the "@"
symbol. For example, a fragment of a configuration file template might look
like:
controls {
inet 10.53.0.1 port @CONTROLPORT@ allow { any; } keys { rndc_key; };
};
options {
query-source address 10.53.0.1;
notify-source 10.53.0.1;
transfer-source 10.53.0.1;
port @PORT@;
allow-new-zones yes;
};
setup.sh should copy the template to the desired filename using the
"copy_setports" shell function defined in "conf.sh", i.e.
copy_setports ns1/named.conf.in ns1/named.conf
This replaces the tokens @PORT@, @CONTROLPORT@, @EXTRAPORT1@ through
@EXTRAPORT8@ with the contents of the environment variables listed above.
setup.sh should do this for all configuration files required when the test
starts.
("setup.sh" should also use this method for replacing the tokens in any Perl or
Python name servers used in the test.)
tests.sh
---
This is the main test file and the contents depend on the test. The contents
are completely up to the developer, although most test scripts have a form
similar to the following for each sub-test:
1. n=$((n + 1))
2. echo_i "prime cache nodata.example ($n)"
3. ret=0
4. $DIG -p ${PORT} @10.53.0.1 nodata.example TXT > dig.out.test$n
5. grep "status: NOERROR" dig.out.test$n > /dev/null || ret=1
6. grep "ANSWER: 0," dig.out.test$n > /dev/null || ret=1
7. if [ $ret != 0 ]; then echo_i "failed"; fi
8. status=$((status + ret))
1. Increment the test number "n" (initialized to zero at the start of the
script).
2. Indicate that the sub-test is about to begin. Note that "echo_i" instead
of "echo" is used. echo_i is a function defined in "conf.sh" which will
prefix the message with "I:<testname>:", so allowing the output from each
test to be identified within the output. The test number is included in
the message in order to tie the sub-test with its output.
3. Initialize return status.
4 - 6. Carry out the sub-test. In this case, a nameserver is queried (note
that the port used is given by the PORT environment variable, which was set
by the inclusion of the file "conf.sh" at the start of the script). The
output is routed to a file whose suffix includes the test number. The
response from the server is examined and, in this case, if the required
string is not found, an error is indicated by setting "ret" to 1.
7. If the sub-test failed, a message is printed. "echo_i" is used to print
the message to add the prefix "I:<test-name>:" before it is output.
8. "status", used to track how many of the sub-tests have failed, is
incremented accordingly. The value of "status" determines the status
returned by "tests.sh", which in turn determines whether the framework
prints the PASS or FAIL message.
Regardless of this, rules that should be followed are:
a. Use the environment variables set by conf.sh to determine the ports to use
for sending and receiving queries.
b. Use a counter to tag messages and to associate the messages with the output
files.
c. Store all output produced by queries/commands into files. These files
should be named according to the command that produced them, e.g. "dig"
output should be stored in a file "dig.out.<suffix>", the suffix being
related to the value of the counter.
d. Use "echo_i" to output informational messages.
e. Retain a count of test failures and return this as the exit status from
the script.
tests_sh_xyz.py
---------------
This glue file is required by the pytest runner in order to find and execute
the shell tests in tests.sh.
Replace the "xyz" with the system test name and create the file with the
following contents.
def test_xyz(run_tests_sh):
run_tests_sh()
clean.sh
---
The inverse of "setup.sh", this is invoked by the framework to clean up the
test directory. It should delete all files that have been created by the test
during its run.
Starting Nameservers
---
As noted earlier, a system test will involve a number of nameservers. These
will be either instances of named, or special servers written in a language
such as Perl or Python.
For the former, the version of "named" being run is that in the "bin/named"
directory in the tree holding the tests (i.e. if "make test" is being run
immediately after "make", the version of "named" used is that just built). The
configuration files, zone files etc. for these servers are located in
subdirectories of the test directory named "nsN", where N is a small integer.
The latter are special nameservers, mostly used for generating deliberately bad
responses, located in subdirectories named "ansN" (again, N is an integer).
In addition to configuration files, these directories should hold the
appropriate script files as well.
Note that the "N" for a particular test forms a single number space, e.g. if
there is an "ns2" directory, there cannot be an "ans2" directory as well.
Ideally, the directory numbers should start at 1 and work upwards.
When running a test, the servers are started using "start.sh" (which is nothing
more than a wrapper for start.pl). The options for "start.pl" are documented
in the header for that file, so will not be repeated here. In summary, when
invoked by "legacy.run.sh", start.pl looks for directories named "nsN" or
"ansN" in the test directory and starts the servers it finds there.
"named" Command-Line Options
---
By default, start.pl starts a "named" server with the following options:
-c named.conf Specifies the configuration file to use (so by implication,
each "nsN" nameserver's configuration file must be called
named.conf).
-d 99 Sets the maximum debugging level.
-D <name> The "-D" option sets a string used to identify the
nameserver in a process listing. In this case, the string
is the name of the subdirectory.
-g Runs the server in the foreground and logs everything to
stderr.
-m record
Turns on these memory usage debugging flags.
-U 4 Uses four listeners.
Acquires a lock on this file in the "nsN" directory, so
preventing multiple instances of this named running in this
directory (which could possibly interfere with the test).
All output is sent to a file called "named.run" in the nameserver directory.
The options used to start named can be altered. There are three ways of doing
this. "start.pl" checks the methods in a specific order: if a check succeeds,
the options are set and any other specification is ignored. In order, these
are:
1. Specifying options to "start.sh"/"start.pl" after the name of the test
directory, e.g.
sh start.sh reclimit ns1 -- "-c n.conf -d 43"
(This is only really useful when running tests interactively.)
2. Including a file called "named.args" in the "nsN" directory. If present,
the contents of the first non-commented, non-blank line of the file are used as
the named command-line arguments. The rest of the file is ignored.
3. Tweaking the default command line arguments with "-T" options. This flag is
used to alter the behavior of BIND for testing and is not documented in the
ARM. The presence of certain files in the "nsN" directory adds flags to
the default command line (the content of the files is irrelevant - it
is only the presence that counts):
named.noaa Appends "-T noaa" to the command line, which causes
"named" to never set the AA bit in an answer.
named.dropedns Adds "-T dropedns" to the command line, which causes
"named" to recognise EDNS options in messages, but drop
messages containing them.
named.maxudp1460 Adds "-T maxudp1460" to the command line, setting the
maximum UDP size handled by named to 1460.
named.maxudp512 Adds "-T maxudp512" to the command line, setting the
maximum UDP size handled by named to 512.
named.noedns Appends "-T noedns" to the command line, which disables
recognition of EDNS options in messages.
named.notcp Adds "-T notcp", which disables TCP in "named".
named.soa Appends "-T nosoa" to the command line, which disables
the addition of SOA records to negative responses (or to
the additional section if the response is triggered by RPZ
rewriting).
Starting Other Nameservers
---
In contrast to "named", nameservers written in Perl or Python (whose script
file should have the name "ans.pl" or "ans.py" respectively) are started with a
fixed command line. In essence, the server is given the address and nothing
else.
(This is not strictly true: Python servers are provided with the number of the
query port to use. Altering the port used by Perl servers currently requires
creating a template file containing the "@PORT@" token, and having "setup.sh"
substitute the actual port being used before the test starts.)
Stopping Nameservers
---
As might be expected, the test system stops nameservers with the script
"stop.sh", which is little more than a wrapper for "stop.pl". Like "start.pl",
the options available are listed in the file's header and will not be repeated
here.
In summary though, the nameservers for a given test, if left running by
specifying the "-k" flag to "legacy.run.sh" when the test is started, can be
stopped by the command:
sh stop.sh <test-name> [server]
... where if the server (e.g. "ns1", "ans3") is not specified, all servers
associated with the test are stopped.
Adding a Test to the System Test Suite
---
Once a test has been created, the following files should be edited:
* conf.sh.common The name of the test should be added to the PARALLEL_COMMON
variable.
* Makefile.am The name of the test should be added to the TESTS variable.
(It is likely that a future iteration of the system test suite will remove the
need to edit multiple files to add a test.)
Valgrind
---
When running system tests, named can be run under Valgrind. The output from
Valgrind are sent to per-process files that can be reviewed after the test has
completed. To enable this, set the USE_VALGRIND environment variable to
"helgrind" to run the Helgrind tool, or any other value to run the Memcheck
tool. To use "helgrind" effectively, build BIND with --disable-atomic.
Developer Notes for pytest runner
===
Test discovery and collection
---
There are two distinct types of system tests. The first is a shell script
tests.sh containing individual test cases executed sequentially and the
success/failure is determined by return code. The second type is a regular
pytest file which contains test functions.
Dealing with the regular pytest files doesn't require any special consideration
as long as the naming conventions are met. Discovering the tests.sh tests is
more complicated.
The chosen solution is to add a bit of glue for each system test. For every
tests.sh, there is an accompanying tests_sh_*.py file that contains a test
function which utilizes a custom run_tests_sh fixture to call the tests.sh
script. Other solutions were tried and eventually rejected. While this
introduces a bit of extra glue, it is the most portable, compatible and least
complex solution.
Module scope
---
Pytest fixtures can have a scope. The "module" scope is the most important for
our use. A module is a python file which contains test functions. Every system
test directory may contain multiple modules (i.e. tests_*.py files)!
The server setup/teardown is done for a module. Bundling test cases together
inside a single module may save some resources. However, test cases inside a
single module can't be executed in parallel.
It is possible to execute different modules defined within a single system test
directory in parallel. This is possible thanks to executing the tests inside a
temporary directory and proper port assignment to ensure there won't be any
conflicts.
Test logging
---
Each module has a separate log which will be saved as pytest.log.txt in the
temporary directory in which the test is executed. This log includes messages
for this module setup/teardown as well as any logging from the tests using the
`logger` fixture. Logging level DEBUG and above will be present in this log.
In general, any log messages using INFO or above will also be printed out
during pytest execution. In CI, the pytest output is also saved to
pytest.out.txt in the bin/tests/system directory.
Parallel execution
---
As mentioned in the previous section, test cases inside a single module can't
be executed in parallel. To put it differently, all tests cases inside the same
module must be performed by the same worker/thread. Otherwise, server
setup/teardown fixtures won't be shared and runtime issues due to port
collisions are likely to occur.
Pytest-xdist is used for executing pytest test cases in parallel using the `-n
N_WORKERS` option. By default, xdist will distribute any test case to any
worker, which would lead to the issue described above. Therefore, conftest.py
enforces equivalent of `--dist loadscope` option which ensures that test cases
within the same (module) scope will be handled by the same worker. Parallelism
is automatically disabled when xdist.scheduler.loadscope library is not
available.
$ pytest -n auto
Test selection
---
It is possible to run just a single pytest test case from any module. Use
standard pytest facility to select the desired test case(s), i.e. pass a
sufficiently unique identifier for `-k` parameter. You can also check which
tests will be executed by using the `--collect-only` flag to debug your `-k`
expression.
Compatibility with older pytest version
---
Keep in mind that the pytest runner must work with ancient versions of pytest.
When implementing new features, it is advisable to check feature support in
pytest and pytest-xdist in older distributions first.
As a general rule, any changes to the pytest runner need to keep working on all
platforms in CI that use the pytest runner. As of 2023-01-13, the oldest
supported version is whatever is available in EL8.
We may need to add more compat code eventually to handle breaking upstream
changes. For example, using request.fspath attribute is already deprecatred in
latest pytest.
Maintenance Notes for legacy runner
===
This section is aimed at developers maintaining BIND's system test framework.
Notes on Parallel Execution
---
Although execution of an individual test is controlled by "legacy.run.sh",
which executes the above shell scripts (and starts the relevant servers) for
each test, the running of all tests in the test suite is controlled by the
Makefile.
All system tests are capable of being run in parallel. For this to work, each
test needs to use a unique set of ports. To avoid the need to define which
tests use which ports (and so risk port clashes as further tests are added),
the ports are determined by "get_ports.sh", a port broker script which keeps
track of ports given to each individual system test.
Cleaning Up From Tests
---
When a test is run, up to three different types of files are created:
1. Files generated by the test itself, e.g. output from "dig" and "rndc", are
stored in the test directory.
2. Files produced by named which may not be cleaned up if named exits
abnormally, e.g. core files, PID files etc., are stored in the test directory.
If the test fails, all these files are retained. But if the test succeeds,
they are cleaned up at different times:
1. Files generated by the test itself are cleaned up by the test's own
"clean.sh", which is called from "legacy.run.sh".
2. Files that may not be cleaned up if named exits abnormally can be removed
using the "cleanall.sh" script.

470
bin/tests/system/README.md Normal file
View File

@ -0,0 +1,470 @@
<!--
Copyright (C) Internet Systems Consortium, Inc. ("ISC")
SPDX-License-Identifier: MPL-2.0
This Source Code Form is subject to the terms of the Mozilla Public
License, v. 2.0. If a copy of the MPL was not distributed with this
file, you can obtain one at https://mozilla.org/MPL/2.0/.
See the COPYRIGHT file distributed with this work for additional
information regarding copyright ownership.
-->
# BIND9 System Test Framework
This directory holds test environments for running bind9 system tests involving
multiple name servers.
Each system test directory holds a set of scripts and configuration files to
test different parts of BIND. The directories are named for the aspect of BIND
they test, for example:
dnssec/ DNSSEC tests
forward/ Forwarding tests
glue/ Glue handling tests
etc.
A system test directory must start with an alphabetic character and may not
contain any special characters. Only hyphen may be used as a word separator.
Typically each set of tests sets up 2-5 name servers and then performs one or
more tests against them. Within the test subdirectory, each name server has a
separate subdirectory containing its configuration data. These subdirectories
are named "nsN" or "ansN" (where N is a number between 1 and 8, e.g. ns1, ans2
etc.)
The tests are completely self-contained and do not require access to the real
DNS. Generally, one of the test servers (usually ns1) is set up as a root
nameserver and is listed in the hints file of the others.
## Running the Tests
### Prerequisites
To run system tests, make sure you have the following dependencies installed:
- python3
- pytest
- perl
- dnspython
- pytest-xdist (for parallel execution)
Individual system tests might also require additional dependencies. If those
are missing, the affected tests will be skipped and should produce a message
specifying what additional prerequisites they expect.
### Network Setup
To enable all servers to run on the same machine, they bind to separate virtual
IP addresses on the loopback interface. ns1 runs on 10.53.0.1, ns2 on
10.53.0.2, etc. Before running any tests, you must set up these addresses by
running the command
sh ifconfig.sh up
as root. The interfaces can be removed by executing the command:
sh ifconfig.sh down
... also as root.
The servers use unprivileged ports (above 1024) instead of the usual port 53,
so they can be run without root privileges once the interfaces have been set
up.
**Note for MacOS Users**
If you wish to make the interfaces survive across reboots, copy
org.isc.bind.system and org.isc.bind.system.plist to /Library/LaunchDaemons
then run
launchctl load /Library/LaunchDaemons/org.isc.bind.system.plist
... as root.
### Running a Single Test
The recommended way is to use pytest and its test selection facilities:
pytest -k <test-name-or-pattern>
Using `-k` to specify a pattern allows to run a single pytest test case within
a system test. E.g. you can use `-k test_sslyze_dot` to execute just the
`test_sslyze_dot()` function from `doth/tests_sslyze.py`.
However, using the `-k` pattern might pick up more tests than intended. You can
use the `--collect-only` option to check the list of tests which match you `-k`
pattern. If you just want to execute all system tests within a single test
directory, you can also use the utility script:
./run.sh system_test_dir_name
### Running All the System Tests
Issuing plain `pytest` command without any argument will execute all tests
sequentially. To execute them in parallel, ensure you have pytest-xdist
installed and run:
pytest [-n <number-of-workers>]
Alternately, using the make command is also supported:
make [-j numproc] test
### Test Artifacts
Each test module is executed inside a unique temporary directory which contains
all the artifacts from the test run. If the tests succeed, they are deleted by
default. To override this behaviour, pass `--noclean` to pytest.
The directory name starts with the system test name, followed by `_tmp_XXXXXX`,
i.e. `dns64_tmp_r07vei9s` for `dns64` test run. Since this name changes each
run, a convenience symlink that has a stable name is also created. It points to
the latest test artifacts directory and has a form of `dns64_sh_dns64`
(depending on the particular test module).
To clean up the temporary directories and symlinks, run `make clean-local` in
the system test directory.
The following test artifacts are typically available:
- pytest.log.txt: main log file with test output
- files generated by the test itself, e.g. output from "dig" and "rndc"
- files produced by named, other tools or helper scripts
## Writing System Tests
### File Overview
Tests are organized into system test directories which may hold one or more
test modules (python files). Each module may have multiple test cases. The
system test directories may contain the following standard files:
- `tests_*.py`: These python files are picked up by pytest as modules. If they
contain any test functions, they're added to the test suite.
- `setup.sh`: This sets up the preconditions for the tests. Although optional,
virtually all tests will require such a file to set up the ports they should
use for the test.
- `tests.sh`: Any shell-based tests are located within this file. Runs the
actual tests.
- `tests_sh_*.py`: A glue file for the pytest runner for executing shell tests.
- `ns<N>`: These subdirectories contain test name servers that can be queried
or can interact with each other. The value of N indicates the address the
server listens on: for example, ns2 listens on 10.53.0.2, and ns4 on
10.53.0.4. All test servers use an unprivileged port, so they don't need to
run as root. These servers log at the highest debug level and the log is
captured in the file "named.run".
- `ans<N>`: Like ns[X], but these are simple mock name servers implemented in
Perl or Python. They are generally programmed to misbehave in ways named
would not so as to exercise named's ability to interoperate with badly
behaved name servers.
### Module Scope
A module is a python file which contains test functions. Every system
test directory may contain multiple modules (i.e. tests_*.py files).
The server setup/teardown is performed for each module. Bundling test cases
together inside a single module may save some resources. However, test cases
inside a single module can't be executed in parallel.
It is possible to execute different modules defined within a single system test
directory in parallel. This is possible thanks to executing the tests inside a
temporary directory and proper port assignment to ensure there won't be any
conflicts.
### Port Usage
In order for the tests to run in parallel, each test requires a unique set of
ports. This is ensured by the pytest runner, which assigns a unique set of
ports to each test module.
Inside the python tests, it is possible to use the `ports` fixture to get the
assigned port numbers. They're also set as environment variables. These include:
- `PORT`: used as the basic dns port
- `TLSPORT`: used as the port for DNS-over-TLS
- `HTTPPORT`, `HTTPSPORT`: used as the ports for DNS-over-HTTP
- `CONTROLPORT`: used as the RNDC control port
- `EXTRAPORT1` through `EXTRAPORT8`: additional ports that can be used as needed
### Logging
Each module has a separate log which will be saved as pytest.log.txt in the
temporary directory in which the test is executed. This log includes messages
for this module setup/teardown as well as any logging from the tests using the
`logger` fixture. Logging level DEBUG and above will be present in this log.
In general, any log messages using INFO or above will also be printed out
during pytest execution. In CI, the pytest output is also saved to
pytest.out.txt in the bin/tests/system directory.
### Adding a Test to the System Test Suite
Once a test has been created it will be automatically picked up by the pytest
runner if it upholds the convention expected by pytest (especially when it comes
to naming files and test functions).
However, if a new system test directory is created, it also needs to be added to
`TESTS` in `Makefile.am`, in order to work with `make check`.
## Test Files
### setup.sh
This script is responsible for setting up the configuration files used in the
test. It is used by both the python and shell tests. It is interpreted just
before the servers are started up for each test module.
To cope with the varying port number, ports are not hard-coded into
configuration files (or, for that matter, scripts that emulate nameservers).
Instead, setup.sh is responsible for editing the configuration files to set the
port numbers.
To do this, configuration files should be supplied in the form of templates
containing tokens identifying ports. The tokens have the same name as the
environment variables listed above, but are prefixed and suffixed by the "@"
symbol. For example, a fragment of a configuration file template might look
like:
controls {
inet 10.53.0.1 port @CONTROLPORT@ allow { any; } keys { rndc_key; };
};
options {
query-source address 10.53.0.1;
notify-source 10.53.0.1;
transfer-source 10.53.0.1;
port @PORT@;
allow-new-zones yes;
};
setup.sh should copy the template to the desired filename using the
"copy_setports" shell function defined in "conf.sh", i.e.
copy_setports ns1/named.conf.in ns1/named.conf
This replaces tokens like @PORT@ with the contents of the environment variables
listed above. setup.sh should do this for all configuration files required when
the test starts.
("setup.sh" should also use this method for replacing the tokens in any Perl or
Python name servers used in the test.)
### tests_*.py
These are test modules containing tests written in python. Every test is a
function which begins with the name `test_` (according to pytest convention). It
is possible to pass fixtures to the test function by specifying their name as
function arguments. Fixtures are used to provide context to the tests, e.g.:
- `ports` is a dictionary with assigned port numbers
- `logger` is a test-specific logging object
### tests_sh_*.py
These are glue files that are required to execute shell based tests (see below).
These modules shouldn't contain any python tests (use a separate file instead).
### tests.sh
This is the test file for shell based tests.
## Nameservers
As noted earlier, a system test will involve a number of nameservers. These
will be either instances of named, or special servers written in a language
such as Perl or Python.
For the former, the version of "named" being run is that in the "bin/named"
directory in the tree holding the tests (i.e. if "make test" is being run
immediately after "make", the version of "named" used is that just built). The
configuration files, zone files etc. for these servers are located in
subdirectories of the test directory named "nsN", where N is a small integer.
The latter are special nameservers, mostly used for generating deliberately bad
responses, located in subdirectories named "ansN" (again, N is an integer).
In addition to configuration files, these directories should hold the
appropriate script files as well.
Note that the "N" for a particular test forms a single number space, e.g. if
there is an "ns2" directory, there cannot be an "ans2" directory as well.
Ideally, the directory numbers should start at 1 and work upwards.
When tests are executed, pytest takes care of the test setup and teardown. It
looks for any `nsN` and `ansN` directories in the system test directory and
starts those servers.
### `named` Command-Line Options
By default, `named` server is started with the following options:
-c named.conf Specifies the configuration file to use (so by implication,
each "nsN" nameserver's configuration file must be called
named.conf).
-d 99 Sets the maximum debugging level.
-D <name> The "-D" option sets a string used to identify the
nameserver in a process listing. In this case, the string
is the name of the subdirectory.
-g Runs the server in the foreground and logs everything to
stderr.
-m record
Turns on these memory usage debugging flags.
-U 4 Uses four listeners.
All output is sent to a file called `named.run` in the nameserver directory.
The options used to start named can be altered. There are a couple ways of
doing this. `start.pl` checks the methods in a specific order: if a check
succeeds, the options are set and any other specification is ignored. In order,
these are:
1. Specifying options to `start.pl` or `start_server` shell utility function
after the name of the test directory, e.g.
start_server --noclean --restart --port ${PORT} ns1 -- "-D xfer-ns1 -T transferinsecs -T transferslowly"
2. Including a file called "named.args" in the "nsN" directory. If present,
the contents of the first non-commented, non-blank line of the file are used as
the named command-line arguments. The rest of the file is ignored.
3. Tweaking the default command line arguments with "-T" options. This flag is
used to alter the behavior of BIND for testing and is not documented in the
ARM. The presence of certain files in the "nsN" directory adds flags to
the default command line (the content of the files is irrelevant - it
is only the presence that counts):
named.noaa Appends "-T noaa" to the command line, which causes
"named" to never set the AA bit in an answer.
named.dropedns Adds "-T dropedns" to the command line, which causes
"named" to recognise EDNS options in messages, but drop
messages containing them.
named.maxudp1460 Adds "-T maxudp1460" to the command line, setting the
maximum UDP size handled by named to 1460.
named.maxudp512 Adds "-T maxudp512" to the command line, setting the
maximum UDP size handled by named to 512.
named.noedns Appends "-T noedns" to the command line, which disables
recognition of EDNS options in messages.
named.notcp Adds "-T notcp", which disables TCP in "named".
named.soa Appends "-T nosoa" to the command line, which disables
the addition of SOA records to negative responses (or to
the additional section if the response is triggered by RPZ
rewriting).
### Running Nameservers Interactively
In order to debug the nameservers, you can let pytest perform the nameserver
setup and interact with the servers before the test starts, or even at specific
points during the test, using the `--trace` option to drop you into pdb debugger
which pauses the execution of the tests, while keeping the server state intact:
pytest -k dns64 --trace
## Developer Notes
### Test discovery and collection
There are two distinct types of system tests. The first is a shell script
tests.sh containing individual test cases executed sequentially and the
success/failure is determined by return code. The second type is a regular
pytest file which contains test functions.
Dealing with the regular pytest files doesn't require any special consideration
as long as the naming conventions are met. Discovering the tests.sh tests is
more complicated.
The chosen solution is to add a bit of glue for each system test. For every
tests.sh, there is an accompanying tests_sh_*.py file that contains a test
function which utilizes a custom run_tests_sh fixture to call the tests.sh
script. Other solutions were tried and eventually rejected. While this
introduces a bit of extra glue, it is the most portable, compatible and least
complex solution.
### Compatibility with older pytest version
Keep in mind that the pytest runner must work with ancient versions of pytest.
When implementing new features, it is advisable to check feature support in
pytest and pytest-xdist in older distributions first.
As a general rule, any changes to the pytest runner need to keep working on all
platforms in CI that use the pytest runner. As of 2023-11-14, the oldest
supported version is whatever is available in EL8.
We may need to add more compat code eventually to handle breaking upstream
changes. For example, using request.fspath attribute is already deprecated in
latest pytest.
### Format of Shell Test Output
Shell-based tests have the following format of output:
<letter>:<test-name>:<message> [(<number>)]
e.g.
I:catz:checking that dom1.example is not served by primary (1)
The meanings of the fields are as follows:
<letter>
This indicates the type of message. This is one of:
S Start of the test
A Start of test (retained for backwards compatibility)
T Start of test (retained for backwards compatibility)
E End of the test
I Information. A test will typically output many of these messages
during its run, indicating test progress. Note that such a message may
be of the form "I:testname:failed", indicating that a sub-test has
failed.
R Result. Each test will result in one such message, which is of the
form:
R:<test-tmpdir>:<result>
where <result> is one of:
PASS The test passed
FAIL The test failed
SKIPPED The test was not run, usually because some
prerequisites required to run the test are missing.
<test-tmpdir>
This is the name of the temporary test directory from which the message
emanated, which is also the name of the subdirectory holding the test files.
<message>
This is text output by the test during its execution.
(<number>)
If present, this will correlate with a file created by the test. The tests
execute commands and route the output of each command to a file. The name of
this file depends on the command and the test, but will usually be of the form:
<command>.out.<suffix><number>
e.g. nsupdate.out.test28, dig.out.q3. This aids diagnosis of problems by
allowing the output that caused the problem message to be identified.