- The `timeout_action` parameter to dns_dispatch_addresponse() been
replaced with a netmgr callback that is called when a dispatch read
times out. this callback may optionally reset the read timer and
resume reading.
- Added a function to convert isc_interval to milliseconds; this is used
to translate fctx->interval into a value that can be passed to
dns_dispatch_addresponse() as the timeout.
- Note that netmgr timeouts are accurate to the millisecond, so code to
check whether a timeout has been reached cannot rely on microsecond
accuracy.
- If serve-stale is configured, then a timeout received by the resolver
may trigger it to return stale data, and then resume waiting for the
read timeout. this is no longer based on a separate stale timer.
- The code for canceling requests in request.c has been altered so that
it can run asynchronously.
- TCP timeout events apply to the dispatch, which may be shared by
multiple queries. since in the event of a timeout we have no query ID
to use to identify the resp we wanted, we now just send the timeout to
the oldest query that was pending.
- There was some additional refactoring in the resolver: combining
fctx_join() and fctx_try_events() into one function to reduce code
duplication, and using fixednames in fetchctx and fetchevent.
- Incidental fix: new_adbaddrinfo() can't return NULL anymore, so the
code can be simplified.
The flow of operations in dispatch is changing and will now be similar
for both UDP and TCP queries:
1) Call dns_dispatch_addresponse() to assign a query ID and register
that we'll be listening for a response with that ID soon. the
parameters for this function include callback functions to inform the
caller when the socket is connected and when the message has been
sent, as well as a task action that will be sent when the response
arrives. (later this could become a netmgr callback, but at this
stage to minimize disruption to the calling code, we continue to use
isc_task for the response event.) on successful completion of this
function, a dispatch entry object will be instantiated.
2) Call dns_dispatch_connect() on the dispatch entry. this runs
isc_nm_udpconnect() or isc_nm_tcpdnsconnect(), as needed, and begins
listening for responses. the caller is informed via a callback
function when the connection is established.
3) Call dns_dispatch_send() on the dispatch entry. this runs
isc_nm_send() to send a request.
4) Call dns_dispatch_removeresponse() to terminate listening and close
the connection.
Implementation comments below:
- As we will be using netmgr buffers now. code to send the length in
TCP queries has also been removed as that is handled by the netmgr.
- TCP dispatches can be used by multiple simultaneous queries, so
dns_dispatch_connect() now checks whether the dispatch is already
connected before calling isc_nm_tcpdnsconnect() again.
- Running dns_dispatch_getnext() from a non-network thread caused a
crash due to assertions in the netmgr read functions that appear to be
unnecessary now. the assertions have been removed.
- fctx->nqueries was formerly incremented when the connection was
successful, but is now incremented when the query is started and
decremented if the connection fails.
- It's no longer necessary for each dispatch to have a pool of tasks, so
there's now a single task per dispatch.
- Dispatch code to avoid UDP ports already in use has been removed.
- dns_resolver and dns_request have been modified to use netmgr callback
functions instead of task events. some additional changes were needed
to handle shutdown processing correctly.
- Timeout processing is not yet fully converted to use netmgr timeouts.
- Fixed a lock order cycle reported by TSAN (view -> zone-> adb -> view)
by by calling dns_zt functions without holding the view lock.
We now use dns_dispatch_cancel() for this purpose. NOTE: The caller
still has to track whether there are pending send or connect events in
the dispatch or dispatch entry; later this should be moved into the
dispatch module as well.
Also removed some public dns_dispatch_*() API calls that are no longer
used outside dispatch itself.
dns_dispatch_connect() connects a dispatch socket (for TCP) or a
dispatch entry socket (for UDP). This is the next step in moving all
uses of the isc_socket code into the dispatch module.
This API is temporary; it needs to be cleaned up further so that it can
be called the same way for both TCP and UDP.
Previously, creation of TCP dispatches differed from UDP in that a TCP
dispatch was created to attach to an existing socket, whereas a UDP
dispatch would be created in a vacuum and sockets would be opened on
demand when a transaction was initiated.
We are moving as much socket code as possible into the dispatch module,
so that it can be replaced with a netmgr version as easily as
possible. (This will also have the side effect of making TCP and UDP
dispatches more similar.)
As a step in that direction, this commit changes
dns_dispatch_createtcp() so that it creates the TCP socket.
- Many dispatch attributes can be set implicitly instead of being passed
in. we can infer whether to set DNS_DISPATCHATTR_TCP or _UDP from
whether we're calling dns_dispatch_createtcp() or _createudp(). we
can also infer DNS_DISPATCHATTR_IPV4 or _IPV6 from the addresses or
the socket that were passed in.
- We no longer use dup'd sockets in UDP dispatches, so the 'dup_socket'
parameter has been removed from dns_dispatch_createudp(), along with
the code implementing it. also removed isc_socket_dup() since it no
longer has any callers.
- The 'buffersize' parameter was ignored and has now been removed;
buffersize is now fixed at 4096.
- Maxbuffers and maxrequests don't need to be passed in on every call to
dns_dispatch_createtcp() and _createudp().
In all current uses, the value for mgr->maxbuffers will either be
raised once from its default of 20000 to 32768, or else left
alone. (passing in a value lower than 20000 does not lower it.) there
isn't enough difference between these values for there to be any need
to configure this.
The value for disp->maxrequests controls both the quota of concurrent
requests for a dispatch and also the size of the dispatch socket
memory pool. it's not clear that this quota is necessary at all. the
memory pool size currently starts at 32768, but is sometimes lowered
to 4096, which is definitely unnecessary.
This commit sets both values permanently to 32768.
- Previously TCP dispatches allocated their own separate QID table,
which didn't incorporate a port table. this commit removes
per-dispatch QID tables and shares the same table between all
dispatches. since dispatches are created for each TCP socket, this may
speed up the dispatch allocation process. there may be a slight
increase in lock contention since all dispatches are sharing a single
QID table, but since TCP sockets are used less often than UDP
sockets (which were already sharing a QID table), it should not be a
substantial change.
- The dispatch port table was being used to determine whether a port was
already in use; if so, then a UDP socket would be bound with
REUSEADDR. this commit removes the port table, and always binds UDP
sockets that way.
Currently the netmgr doesn't support unconnected, shared UDP sockets, so
there's no reason to retain that functionality in the dispatcher prior
to porting to the netmgr.
In this commit, the DNS_DISPATCHATTR_EXCLUSIVE attribute has been
removed as it is now non-optional; UDP dispatches are alwasy exclusive.
Code implementing non-exclusive UDP dispatches has been removed.
dns_dispatch_getentrysocket() now always returns the dispsocket for UDP
dispatches and the dispatch socket for TCP dispatches.
There is no longer any need to search for existing dispatches from
dns_dispatch_getudp(), so the 'mask' option has been removed, and the
function renamed to the more descriptive dns_dispatch_createudp().
- style cleanup
- removed NULL checks in places where they are not currently needed
- use isc_refcount for dispatch reference counting
- revised code flow for readability
- remove some #ifdefs that are no longer relevant
- remove unused struct members
- removed unnecessary function parameters
- use C99 struct initialization
The DNS_REQUESTOPT_SHARE flag was added when client-side pipelining of
TCP queries was implemented. there was no need to make it optional;
forcing it to be in effect for all requests simplfiies the code.
- UDP buffersize is now established when creating dispatch manager
and is always set to 4096.
- Set up the default port range in dispatchmgr before setting the magic
number.
- Magic is not set until dispatchmgr is fully created.
Also disable the semantic patch as the code needs tweaks here and there because
some destroy functions might not destroy the object and return early if the
object is still in use.
The isc_buffer_allocate() function now cannot fail with ISC_R_MEMORY.
This commit removes all the checks on the return code using the semantic
patch from previous commit, as isc_buffer_allocate() now returns void.
isc_event_allocate() calls isc_mem_get() to allocate the event structure. As
isc_mem_get() cannot fail softly (e.g. it never returns NULL), the
isc_event_allocate() cannot return NULL, hence we remove the (ret == NULL)
handling blocks using the semantic patch from the previous commit.
Using isc_mem_put(mctx, ...) + isc_mem_detach(mctx) required juggling with the
local variables when mctx was part of the freed object. The isc_mem_putanddetach
function can handle this case internally, but it wasn't used everywhere. This
commit apply the semantic patching plus bit of manual work to replace all such
occurrences with proper usage of isc_mem_putanddetach().
- mark the 'geoip-use-ecs' option obsolete; warn when it is used
in named.conf
- prohibit 'ecs' ACL tags in named.conf; note that this is a fatal error
since simply ignoring the tags could make ACLs behave unpredictably
- re-simplify the radix and iptable code
- clean up dns_acl_match(), dns_aclelement_match(), dns_acl_allowed()
and dns_geoip_match() so they no longer take ecs options
- remove the ECS-specific unit and system test cases
- remove references to ECS from the ARM
