The zone 'retransfer3.' tests whether zones that 'rndc signing
-nsec3param' requests are queued even if the zone is not loaded.
The test assumes that if 'rndc signing -list' shows that the zone is
done signing with two keys, and there are no NSEC3 chains pending, the
zone is done handling the '-nsec3param' queued requests. However, it
is possible that the 'rndc signing -list' command is received before
the corresponding privatetype records are added to the zone (the records
that are used to retrieve the signing status with 'rndc signing').
This is what happens in test failure
https://gitlab.isc.org/isc-projects/bind9/-/jobs/2722752.
The 'rndc signing -list retransfer3' is thus an unreliable check.
It is simpler to just remove the check and wait for a certain amount
of time and check whether ns3 has re-signed the zone using NSEC3.
Commit b69e783164 inadvertently caused
builds using the --disable-doh switch to fail, by putting the
declaration of the isc__nm_async_settlsctx() function inside an #ifdef
block that is only evaluated when DNS-over-HTTPS support is enabled.
This results in the following compilation errors being triggered:
netmgr/netmgr.c:2657:1: error: no previous prototype for 'isc__nm_async_settlsctx' [-Werror=missing-prototypes]
2657 | isc__nm_async_settlsctx(isc__networker_t *worker, isc__netievent_t *ev0) {
| ^~~~~~~~~~~~~~~~~~~~~~~
Fix by making the declaration of the isc__nm_async_settlsctx() function
in lib/isc/netmgr/netmgr-int.h visible regardless of whether
DNS-over-HTTPS support is enabled or not.
Remove unnecessary != NULL checks
*** CID 352809: Null pointer dereferences (REVERSE_INULL) /lib/dns/message.c: 4654 in dns_message_buildopt()
4648 if (rdata != NULL) {
4649 dns_message_puttemprdata(message, &rdata);
4650 }
4651 if (rdataset != NULL) {
4652 dns_message_puttemprdataset(message, &rdataset);
4653 }
>>> CID 352809: Null pointer dereferences (REVERSE_INULL)
>>> Null-checking "rdatalist" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
4654 if (rdatalist != NULL) {
4655 dns_message_puttemprdatalist(message, &rdatalist);
4656 }
4657 return (result);
4658 }
4659
The usage of xmlInitThreads() and xmlCleanupThreads() functions in
libxml2 is now marked as deprecated, and these functions will be made
private in the future.
Use xmlInitParser() and xmlCleanupParser() instead of them.
The isc_nm_listentlsdns() function erroneously calls
isc__nm_tcpdns_stoplistening() instead of isc__nm_tlsdns_stoplistening()
when something goes wrong, which can cause an assertion failure.
In several cases where IDNA2008 mappings do not exist whereas IDNA2003
mappings do, dig was failing to process the suplied domain name. Take a
backwards compatible approach, and convert the domain to IDNA2008 form,
and if that fails try the IDNA2003 conversion.
There is an omission of assigning the return value coming from the
isc_portset_create() function to the result variable.
CID 356328:
/bin/named/server.c: 8756 in load_configuration()
8750 "creating UDP/IPv4 port set: %s",
8751 isc_result_totext(result));
8752 goto cleanup_bindkeys_parser;
8753 }
8754 isc_portset_create(named_g_mctx, &v6portset);
8755 if (result != ISC_R_SUCCESS) {
>>> CID 356328: Control flow issues (DEADCODE)
>>> Execution cannot reach this statement: "isc_log_write(named_g_lctx,...".
8756 isc_log_write(named_g_lctx, NAMED_LOGCATEGORY_GENERAL,
8757 NAMED_LOGMODULE_SERVER, ISC_LOG_ERROR,
8758 "creating UDP/IPv6 port set: %s",
8759 isc_result_totext(result));
8760 goto cleanup_v4portset;
8761 }
YAML strings should be quoted if they contain colon characters.
Since IPv6 addresses do, we now quote the query_address and
response_address strings in all YAML output.
The dnstap query_message field was in some cases being filled in
with response messages, along with the response_message field.
The query_message field should only be used when logging requests,
and the response_message field only when logging responses.
Check the new configuration option's syntax using the 'checkconf' system
test.
Check if the new option works by parsing DiG's output in the 'rpz'
system test.
Implement the configuration option with its checking and parsing parts.
The option should be later used by BIND to set an extended error
code (EDE) for the queries modified in the result of RPZ processing.
The RPZ documentation section with response policy rules and actions
is incomplete.
Add information about the 'RPZ-CLIENT-IP' rule, and 'TCP-Only' and
'DROP' actions.
When we are closing the listening sockets, there's a time window in
which the TCP connection could be accepted although the respective
stoplistening function has already returned to control to the caller.
Clear the accept callback function early, so it doesn't get called when
we are not interested in the incoming connections anymore.
The netmgr_test unit test has been subdivided into tcp_test,
tcpdns_test, tls_test, tlsdns_test, and udp_test components.
These have been updated to use the new loopmgr.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
* isc_timer was rewritten using the uv_timer, and isc_timermgr_t was
completely removed; isc_timer objects are now directly created on the
isc_loop event loops.
* the isc_timer API has been simplified. the "inactive" timer type has
been removed; timers are now stopped by calling isc_timer_stop()
instead of resetting to inactive.
* isc_manager now creates a loop manager rather than a timer manager.
* modules and applications using isc_timer have been updated to use the
new API.
This commit introduces new APIs for applications and signal handling,
intended to replace isc_app for applications built on top of libisc.
* isc_app will be replaced with isc_loopmgr, which handles the
starting and stopping of applications. In isc_loopmgr, the main
thread is not blocked, but is part of the working thread set.
The loop manager will start a number of threads, each with a
uv_loop event loop running. Setup and teardown functions can be
assigned which will run when the loop starts and stops, and
jobs can be scheduled to run in the meantime. When
isc_loopmgr_shutdown() is run from any the loops, all loops
will shut down and the application can terminate.
* signal handling will now be handled with a separate isc_signal unit.
isc_loopmgr only handles SIGTERM and SIGINT for application
termination, but the application may install additional signal
handlers, such as SIGHUP as a signal to reload configuration.
* new job running primitives, isc_job and isc_async, have been added.
Both units schedule callbacks (specifying a callback function and
argument) on an event loop. The difference is that isc_job unit is
unlocked and not thread-safe, so it can be used to efficiently
run jobs in the same thread, while isc_async is thread-safe and
uses locking, so it can be used to pass jobs from one thread to
another.
* isc_tid will be used to track the thread ID in isc_loop worker
threads.
* unit tests have been added for the new APIs.
