Add the code and documentation required to provide KSR import using
rndc. This is just the command, and the feature is at this point in
time still not implemented.
named now prints its initial working directory during startup and the
changed working directory when loading or reloading its configuration
file if it has a valid 'directory' option defined.
Add isc_logconfig_get() function to get the current logconfig and use
the getter to replace most of the little dancing around setting up
logging in the tools. Thus:
isc_log_create(mctx, &lctx, &logconfig);
isc_log_setcontext(lctx);
dns_log_setcontext(lctx);
...
...use lcfg...
...
isc_log_destroy();
is now only:
logconfig = isc_logconfig_get(lctx);
...use lcfg...
For thread-safety, isc_logconfig_get() should be surrounded by RCU read
lock, but since we never use isc_logconfig_get() in threaded context,
the only place where it is actually used (but not really needed) is
named_log_init().
This condition in catalog zone processing functions is checked only
for sanity, so there is no meaning for a log message that normally
shouldn't be ever logged.
implement, document, and test the 'max-query-restarts' option
which specifies the query restart limit - the number of times
we can follow CNAMEs before terminating resolution.
Instead of calling dst_lib_init() and dst_lib_destroy() explicitly by
all the programs, create a separate memory context for the DST subsystem
and use the library constructor and destructor to initialize the DST
internals.
The OpenSSL 1.x Engines support has been deprecated in the OpenSSL 3.x
and is going to be removed. Remove the OpenSSL Engine support in favor
of OpenSSL Providers.
When automatic-interface-scan is disabled, the route socket was still
being opened. Add new API to connect / disconnect from the route socket
only as needed.
Additionally, move the block that disables periodic interface rescans to
a place where it actually have access to the configuration values.
Previously, the values were being checked before the configuration was
loaded.
Some external log file rotation programs use signals to tell programs
to close log files. SIGHUP can be used to do this but it also does
a full reconfiguration. Configure named to accept SIGUSR1 as a
signal to close log files.
View matching on an incoming query checks the query's signature,
which can be a CPU-heavy task for a SIG(0)-signed message. Implement
an asynchronous mode of the view matching function which uses the
offloaded signature checking facilities, and use it for the incoming
queries.
This is a tiny helper function which is used only once and can be
replaced with two function calls instead. Removing this makes
supporting asynchronous signature checking less complicated.
In order to protect from a malicious DNS client that sends many
queries with a SIG(0)-signed message, add a quota of simultaneously
running SIG(0) checks.
This protection can only help when named is using more than one worker
threads. For example, if named is running with the '-n 4' option, and
'sig0checks-quota 2;' is used, then named will make sure to not use
more than 2 workers for the SIG(0) signature checks in parallel, thus
leaving the other workers to serve the remaining clients which do not
use SIG(0)-signed messages.
That limitation is going to change when SIG(0) signature checks are
offloaded to "slow" threads in a future commit.
The 'sig0checks-quota-exempt' ACL option can be used to exempt certain
clients from the quota requirements using their IP or network addresses.
The 'sig0checks-quota-maxwait-ms' option is used to define a maximum
amount of time for named to wait for a quota to appear. If during that
time no new quota becomes available, named will answer to the client
with DNS_R_REFUSED.
Previously, the number of RR types for a single owner name was limited
only by the maximum number of the types (64k). As the data structure
that holds the RR types for the database node is just a linked list, and
there are places where we just walk through the whole list (again and
again), adding a large number of RR types for a single owner named with
would slow down processing of such name (database node).
Add a configurable limit to cap the number of the RR types for a single
owner. This is enforced at the database (rbtdb, qpzone, qpcache) level
and configured with new max-types-per-name configuration option that
can be configured globally, per-view and per-zone.
Previously, the number of RRs in the RRSets were internally unlimited.
As the data structure that holds the RRs is just a linked list, and
there are places where we just walk through all of the RRs, adding an
RRSet with huge number of RRs inside would slow down processing of said
RRSets.
Add a configurable limit to cap the number of the RRs in a single RRSet.
This is enforced at the database (rbtdb, qpzone, qpcache) level and
configured with new max-records-per-type configuration option that can
be configured globally, per-view and per-zone.
The high-water allows administrators to better tune the recursive
clients limit without having to to poll the statistics channel in high
rates to get this number.
the previous commit introduced a possible race in getsigningtime()
where the rdataset header could change between being found on the
heap and being bound.
getsigningtime() now looks at the first element of the heap, gathers the
locknum, locks the respective lock, and retrieves the header from the
heap again. If the locknum has changed, it will rinse and repeat.
Theoretically, this could spin forever, but practically, it almost never
will as the heap changes on the zone are very rare.
we simplify matters further by changing the dns_db_getsigningtime()
API call. instead of passing back a bound rdataset, we pass back the
information the caller actually needed: the resigning time, owner name
and type of the rdataset that was first on the heap.
if we had a method to get the running loop, similar to how
isc_tid() gets the current thread ID, we can simplify loop
and loopmgr initialization.
remove most uses of isc_loop_current() in favor of isc_loop().
in some places where that was the only reason to pass loopmgr,
remove loopmgr from the function parameters.
by default, QPDB is the database used by named and all tools and
unit tests. the old default of RBTDB can now be restored by using
"configure --with-zonedb=rbt --with-cachedb=rbt".
some tests have been fixed so they will work correctly with either
database.
CHANGES and release notes have been updated to reflect this change.
replace the string "rbt" throughout BIND with "qp" so that
qpdb databases will be used by default instead of rbtdb.
rbtdb databases can still be used by specifying "database rbt;"
in a zone statement.
With _exit() instead of exit() in place, we don't need
isc__tls_setfatalmode() mechanism as the atexit() calls will not be
executed including OpenSSL atexit hooks.
Since the fatal() isn't a correct but rather abrupt termination of the
program, we want to skip the various atexit() calls because not all
memory might be freed during fatal() call, etc. Using _exit() instead
of exit() has this effect - the program will end, but no destructors or
atexit routines will be called.
Expose the newly added 'first refresh' flag in the information
provided by the 'rndc staus' command, by showing the number of
zones, which are not yet fully ready, and their first refresh
is pending or is in-progress.
Instead of running all the cryptographic validation in a tight loop,
spread it out into multiple event loop "ticks", but moving every single
validation into own isc_async_run() asynchronous event. Move the
cryptographic operations - both verification and DNSKEY selection - to
the offloaded threads (isc_work_enqueue), this further limits the time
we spend doing expensive operations on the event loops that should be
fast.
Limit the impact of invalid or malicious RRSets that contain crafted
records causing the dns_validator to do many validations per single
fetch by adding a cap on the maximum number of validations and maximum
number of validation failures that can happen before the resolving
fails.
This is now the default way to implement attaching to/detaching from
a pointer.
Also update cfg_keystore_fromconfig() to allow NULL value for the
keystore pointer. In most cases we detach it immediately after the
function call.
Move dns_dnssec_findzonekeys from the dnssec.{c,h} source code to
zone.{c,h} (the header file already commented that this should be done
inside dns_zone_t).
Alter the function in such a way, that keys are searched for in the
key stores if a 'dnssec-policy' (kasp) is attached to the zone,
otherwise keep using the zone's key-directory.
When writing key files to disk, use the internally stored directory.
Add an access function 'dst_key_directory()'.
Most calls to keymgr functions no longer need to provide the
key-directory value. Only 'dns_keymgr_run' still needs access to
the zone's key-directory in case the key-store is set to the built-in
key-directory.
Refactor dns_dnssec_findmatchingkeys and dns_dnssec_keylistfromrdataset
to take into account the key store directories in case the zone is using
dnssec-policy (kasp). Add 'kasp' and 'keystores' parameters.
This requires the keystorelist to be stored inside the zone structure.
The calls to these functions in the DNSSEC tools can use NULL as the
kasp value, as dnssec-signzone does not (yet) support dnssec-policy,
and key collision is checked inside the directory where it is created.
When creating the kasp structure, instead of storing the name of the
key store on keys, store a reference to the key store object instead.
This requires to build the keystore list prior to creating the kasp
structures, in the dnssec tools, the check code and the server code.
We will create a builtin keystore called "key-directory" which means
use the zone's key-directory as the key store.
The check code changes, because now the keystore is looked up before
creating the kasp structure (and if the keystore is not found, this
is an error). Instead of looking up the keystore after all
'dnssec-policy' clauses have been read.
Multiple zones should be able to read the same key and signing policy
at the same time. Since writing the kasp lock only happens during
reconfiguration, and the complete kasp list is being replaced, there
is actually no need for a lock. Reference counting ensures that a kasp
structure is not destroyed when still being attached to one or more
zones.
This significantly improves the load configuration time.
