Because of the "goto" in the "if" body the "else" part is unnecessary
and adds another level of indentation.
Cleanup the code to not have the "else" part.
Catz logs a warning message when it is told to modify a zone which was
not added by the current catalog zone.
When logging a warning, distinguish the two cases when the zone
was not added by a catalog zone at all, and when the zone was
added by a different catalog zone.
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
C11 has builtin support for _Noreturn function specifier with
convenience noreturn macro defined in <stdnoreturn.h> header.
Replace ISC_NORETURN macro by C11 noreturn with fallback to
__attribute__((noreturn)) if the C11 support is not complete.
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
Instead of passing the "workers" variable back and forth along with
passing the single isc_nm_t instance, add isc_nm_getnworkers() function
that returns the number of netmgr threads are running.
Change the ns_interfacemgr and ns_taskmgr to utilize the newly acquired
knowledge.
The isc_timer_create() function was a bit conflated. It could have been
used to create a timer and start it at the same time. As there was a
single place where this was done before (see the previous commit for
nta.c), this was cleaned up and the isc_timer_create() function was
changed to only create new timer.
Previously, the function(s) in the commit subject could fail for various
reasons - mostly allocation failures, or other functions returning
different return code than ISC_R_SUCCESS. Now, the aforementioned
function(s) cannot ever fail and they would always return ISC_R_SUCCESS.
Change the function(s) to return void and remove the extra checks in
the code that uses them.
The keep-response-order option has been obsoleted, and in this commit,
remove the keep-response-order ACL map rendering the option no-op, the
call the isc_nm_sequential() and the now unused isc_nm_sequential()
function itself.
If a view configuration error occurs during a named reconfiguration
procedure, BIND can end up having twin views (old and new), with some
zones and internal structures attached to the old one, and others
attached to the new one, which essentially creates chaos.
Implement some additional view reverting mechanisms to avoid the
situation described above:
1. Revert rpz configuration.
2. Revert catz configuration.
3. Revert zones to view attachments.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
If a catz event is scheduled while the task manager was being
shut down, task-exclusive mode is unavailable. This needs to be
handled as an error rather than triggering an assertion.
This commit enables client-side TLS contexts re-use for zone transfers
over TLS. That, in turn, makes it possible to use the internal session
cache associated with the contexts, allowing the TLS connections to be
established faster and requiring fewer resources by not going through
the full TLS handshake procedure.
Previously that would recreate the context on every connection, making
TLS session resumption impossible.
Also, this change lays down a foundation for Strict TLS (when the
client validates a server certificate), as the TLS context cache can
be extended to store additional data required for validation (like
intermediates CA chain).
Using the TLS context cache for server-side contexts could reduce the
number of contexts to initialise in the configurations when e.g. the
same 'tls' entry is used in multiple 'listen-on' statements for the
same DNS transport, binding to multiple IP addresses.
In such a case, only one TLS context will be created, instead of a
context per IP address, which could reduce the initialisation time, as
initialising even a non-ephemeral TLS context introduces some delay,
which can be *visually* noticeable by log activity.
Also, this change lays down a foundation for Mutual TLS (when the
server validates a client certificate, additionally to a client
validating the server), as the TLS context cache can be extended to
store additional data required for validation (like intermediates CA
chain).
Additionally to the above, the change ensures that the contexts are
not being changed after initialisation, as such a practice is frowned
upon. Previously we would set the supported ALPN tags within
isc_nm_listenhttp() and isc_nm_listentlsdns(). We do not do that for
client-side contexts, so that appears to be an overlook. Now we set
the supported ALPN tags right after server-side contexts creation,
similarly how we do for client-side ones.
A customary method of exporting TLS pre-master secrets used by a piece
of software (for debugging purposes, e.g. to examine decrypted traffic
in a packet sniffer) is to set the SSLKEYLOGFILE environment variable to
the path to the file in which this data should be logged.
In order to enable writing any data to a file using the logging
framework provided by libisc, a logging channel needs to be defined and
the relevant logging category needs to be associated with it. Since the
SSLKEYLOGFILE variable is only expected to contain a path, some defaults
for the logging channel need to be assumed. Add a new function,
named_log_setdefaultsslkeylogfile(), for setting up those implicit
defaults, which are equivalent to the following logging configuration:
channel default_sslkeylogfile {
file "${SSLKEYLOGFILE}" versions 10 size 100m suffix timestamp;
};
category sslkeylog {
default_sslkeylogfile;
};
This ensures TLS pre-master secrets do not use up more than about 1 GB
of disk space, which should be enough to hold debugging data for the
most recent 1 million TLS connections.
As these values are arguably not universally appropriate for all
deployment environments, a way for overriding them needs to exist.
Suppress creation of the default logging channel for TLS pre-master
secrets when the SSLKEYLOGFILE variable is set to the string "config".
This enables providing custom logging configuration for the relevant
category via the "logging" stanza. (Note that it would have been
simpler to only skip setting up the default logging channel for TLS
pre-master secrets if the SSLKEYLOGFILE environment variable is not set
at all. However, libisc only logs pre-master secrets if that variable
is set. Detecting a "magic" string enables the SSLKEYLOGFILE
environment variable to serve as a single control for both enabling TLS
pre-master secret collection and potentially also indicating where and
how they should be exported.)
The 850e9e59bf commit intended to recreate
the HTTPS and TLS interfaces during reconfiguration, but they are being
recreated also during regular interface re-scans.
Make sure the HTTPS and TLS interfaces are being recreated only during
reconfiguration.
A number of DNS implementation produce NSEC records with bad type
maps that don't contain types that exist at the name leading to
NODATA responses being synthesize instead of the records in the
zone. NSEC records with these bad type maps often have the NSEC
NSEC field set to '\000.QNAME'. We look for the first label of
this pattern.
e.g.
example.com NSEC \000.example.com SOA NS NSEC RRSIG
example.com RRRSIG NSEC ...
example.com SOA ...
example.com RRRSIG SOA ...
example.com NS ...
example.com RRRSIG NS ...
example.com A ...
example.com RRRSIG A ...
A is missing from the type map.
This introduces a temporary option 'reject-000-label' to control
this behaviour.
'server <prefix> { broken-nsec yes; };' can now be used to stop
NSEC records from negative responses from servers in the given
prefix being cached and hence available to synth-from-dnssec.
dns_db_nodecount can now be used to get counts from the auxilary
rbt databases. The existing node count is returned by
tree=dns_dbtree_main. The nsec and nsec3 node counts by dns_dbtree_nsec
and dns_dbtree_nsec3 respectively.
The following scenario triggers a "named" crash:
1. Configure a catalog zone.
2. Start "named".
3. Comment out the "catalog-zone" clause.
4. Run `rndc reconfig`.
5. Uncomment the "catalog-zone" clause.
6. Run `rndc reconfig` again.
Implement the required cleanup of the in-memory catalog zone during
the first `rndc reconfig`, so that the second `rndc reconfig` could
find it in an expected state.
The lame-ttl cache is implemented in ADB as per-server locked
linked-list "indexed" with <qname,qtype>. This list has to be walked
every time there's a new query or new record added into the lame cache.
Determined attacker can use this to degrade performance of the resolver.
Resolver testing has shown that disabling the lame cache has little
impact on the resolver performance and it's a minimal viable defense
against this kind of attack.
Some of the libns unit tests override the isc_nmhandle_attach() and
_detach() functions. This causes a failure in ns_interface_create()
if a route socket is being used, so we add a parameter to disable it.
the logfileconfig system test did not conform to the style of
other tests, and was difficult to read and maintain. it has
been cleaned up and simplifeid in several ways:
- named.args used when appropriate so that named can be started with
specified command line arguments, instead of having it launched
directly from tests.sh
- unused root zone removed from named configuration
- an existing directory used instead of using 'mkdir' to create one
- dnssec-validation disabled to stop the server sending unnecessary queries
incidental fix: removed leftover debugging printfs from logconf.c.
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* dns_view_adddelegationonly()
* dns_view_excludedelegationonly()
With isc_mem_get() and dns_name_dup() no longer being able to fail, some
functions can now only return ISC_R_SUCCESS. Change the return type to
void for the following function(s):
* dns_resolver_addalternate()
Replace some "master/slave" terminology in the code with the preferred
"primary/secondary" keywords. This also changes user output such as
log messages, and fixes a typo ("seconary") in cfg_test.c.
There are still some references to "master" and "slave" for various
reasons:
- The old syntax can still be used as a synonym.
- The master syntax is kept when it refers to master files and formats.
- This commit replaces mainly keywords that are local. If "master" or
"slave" is used in for example a structure that is all over the
place, it is considered out of scope for the moment.
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
as libdns is no longer exported, it's not necessary to have
init and shutdown functions. the only purpose they served
was to create a private mctx and run dst_lib_init(), which
can be called directly instead.
- startrecv() and getnext() have been rewritten.
- Don't set TCP flag when connecting a UDP dispatch.
- Prevent TCP connections from trying to connect twice.
- dns_dispatch_gettcp() can now find a matching TCP dispatch that has
not yet fully connected, and attach to it. when the connection is
completed, the connect callbacks are run for all of the pending
entries.
- An atomic 'state' variable is now used for connection state instead of
attributes.
- When dns_dispatch_cancel() is called on a TCP dispatch entry, only
that one entry is canceled. the dispatch itself should not be shut
down until there are no dispatch entries left associated with it.
- Other incidental cleanup, including removing DNS_DISPATCHATTR_IPV4 and
_IPV6 (they were being set in the dispatch attributes but never used),
cleaning up dns_requestmgr_create(), and renaming dns_dispatch_read()
to the more descriptive dns_dispatch_resume().
- Responses received by the dispatch are no longer sent to the caller
via a task event, but via a netmgr-style recv callback. the 'action'
parameter to dns_dispatch_addresponse() is now called 'response' and
is called directly from udp_recv() or tcp_recv() when a valid response
has been received.
- All references to isc_task and isc_taskmgr have been removed from
dispatch functions.
- All references to dns_dispatchevent_t have been removed and the type
has been deleted.
- Added a task to the resolver response context, to be used for fctx
events.
- When the caller cancels an operation, the response handler will be
called with ISC_R_CANCELED; it can abort immediately since the caller
will presumably have taken care of cleanup already.
- Cleaned up attach/detach in resquery and request.
Since every dispsock was associated with a dispentry anyway (though not
always vice versa), the members of dispsock have been combined into
dispentry, which is now reference-counted. dispentry objects are now
attached before connecting and detached afterward to prevent races
between the connect callback and dns_dispatch_removeresponse().
Dispatch and dispatchmgr objects are now reference counted as well, and
the shutdown process has been simplified. reference counting of
resquery and request objects has also been cleaned up significantly.
dns_dispatch_cancel() now flags a dispentry as having been canceled, so
that if the connect callback runs after cancellation, it will not
initiate a read.
The isblackholed() function has been simplified.
The flow of operations in dispatch is changing and will now be similar
for both UDP and TCP queries:
1) Call dns_dispatch_addresponse() to assign a query ID and register
that we'll be listening for a response with that ID soon. the
parameters for this function include callback functions to inform the
caller when the socket is connected and when the message has been
sent, as well as a task action that will be sent when the response
arrives. (later this could become a netmgr callback, but at this
stage to minimize disruption to the calling code, we continue to use
isc_task for the response event.) on successful completion of this
function, a dispatch entry object will be instantiated.
2) Call dns_dispatch_connect() on the dispatch entry. this runs
isc_nm_udpconnect() or isc_nm_tcpdnsconnect(), as needed, and begins
listening for responses. the caller is informed via a callback
function when the connection is established.
3) Call dns_dispatch_send() on the dispatch entry. this runs
isc_nm_send() to send a request.
4) Call dns_dispatch_removeresponse() to terminate listening and close
the connection.
Implementation comments below:
- As we will be using netmgr buffers now. code to send the length in
TCP queries has also been removed as that is handled by the netmgr.
- TCP dispatches can be used by multiple simultaneous queries, so
dns_dispatch_connect() now checks whether the dispatch is already
connected before calling isc_nm_tcpdnsconnect() again.
- Running dns_dispatch_getnext() from a non-network thread caused a
crash due to assertions in the netmgr read functions that appear to be
unnecessary now. the assertions have been removed.
- fctx->nqueries was formerly incremented when the connection was
successful, but is now incremented when the query is started and
decremented if the connection fails.
- It's no longer necessary for each dispatch to have a pool of tasks, so
there's now a single task per dispatch.
- Dispatch code to avoid UDP ports already in use has been removed.
- dns_resolver and dns_request have been modified to use netmgr callback
functions instead of task events. some additional changes were needed
to handle shutdown processing correctly.
- Timeout processing is not yet fully converted to use netmgr timeouts.
- Fixed a lock order cycle reported by TSAN (view -> zone-> adb -> view)
by by calling dns_zt functions without holding the view lock.
- Many dispatch attributes can be set implicitly instead of being passed
in. we can infer whether to set DNS_DISPATCHATTR_TCP or _UDP from
whether we're calling dns_dispatch_createtcp() or _createudp(). we
can also infer DNS_DISPATCHATTR_IPV4 or _IPV6 from the addresses or
the socket that were passed in.
- We no longer use dup'd sockets in UDP dispatches, so the 'dup_socket'
parameter has been removed from dns_dispatch_createudp(), along with
the code implementing it. also removed isc_socket_dup() since it no
longer has any callers.
- The 'buffersize' parameter was ignored and has now been removed;
buffersize is now fixed at 4096.
- Maxbuffers and maxrequests don't need to be passed in on every call to
dns_dispatch_createtcp() and _createudp().
In all current uses, the value for mgr->maxbuffers will either be
raised once from its default of 20000 to 32768, or else left
alone. (passing in a value lower than 20000 does not lower it.) there
isn't enough difference between these values for there to be any need
to configure this.
The value for disp->maxrequests controls both the quota of concurrent
requests for a dispatch and also the size of the dispatch socket
memory pool. it's not clear that this quota is necessary at all. the
memory pool size currently starts at 32768, but is sometimes lowered
to 4096, which is definitely unnecessary.
This commit sets both values permanently to 32768.
- Previously TCP dispatches allocated their own separate QID table,
which didn't incorporate a port table. this commit removes
per-dispatch QID tables and shares the same table between all
dispatches. since dispatches are created for each TCP socket, this may
speed up the dispatch allocation process. there may be a slight
increase in lock contention since all dispatches are sharing a single
QID table, but since TCP sockets are used less often than UDP
sockets (which were already sharing a QID table), it should not be a
substantial change.
- The dispatch port table was being used to determine whether a port was
already in use; if so, then a UDP socket would be bound with
REUSEADDR. this commit removes the port table, and always binds UDP
sockets that way.
Currently the netmgr doesn't support unconnected, shared UDP sockets, so
there's no reason to retain that functionality in the dispatcher prior
to porting to the netmgr.
In this commit, the DNS_DISPATCHATTR_EXCLUSIVE attribute has been
removed as it is now non-optional; UDP dispatches are alwasy exclusive.
Code implementing non-exclusive UDP dispatches has been removed.
dns_dispatch_getentrysocket() now always returns the dispsocket for UDP
dispatches and the dispatch socket for TCP dispatches.
There is no longer any need to search for existing dispatches from
dns_dispatch_getudp(), so the 'mask' option has been removed, and the
function renamed to the more descriptive dns_dispatch_createudp().
- style cleanup
- removed NULL checks in places where they are not currently needed
- use isc_refcount for dispatch reference counting
- revised code flow for readability
- remove some #ifdefs that are no longer relevant
- remove unused struct members
- removed unnecessary function parameters
- use C99 struct initialization
- UDP buffersize is now established when creating dispatch manager
and is always set to 4096.
- Set up the default port range in dispatchmgr before setting the magic
number.
- Magic is not set until dispatchmgr is fully created.
This commit adds the ability to enable or disable stateless TLS
session resumption tickets (see RFC5077). Having this ability is
twofold.
Firstly, these tickets are encrypted by the server, and the algorithm
might be weaker than the algorithm negotiated during the TLS session
establishment (it is in general the case for TLSv1.2, but the generic
principle applies to TLSv1.3 as well, despite it having better ciphers
for session tickets). Thus, they might compromise Perfect Forward
Secrecy.
Secondly, disabling it might be necessary if the same TLS key/cert
pair is supposed to be used by multiple servers to achieve, e.g., load
balancing because the session ticket by default gets generated in
runtime, while to achieve successful session resumption ability, in
this case, would have required using a shared key.
The proper alternative to having the ability to disable stateless TLS
session resumption tickets is to implement a proper session tickets
key rollover mechanism so that key rotation might be performed
often (e.g. once an hour) to not compromise forward secrecy while
retaining the associated performance benefits. That is much more work,
though. On the other hand, having the ability to disable session
tickets allows having a deployable configuration right now in the
cases when either forward secrecy is wanted or sharing the TLS
key/cert pair between multiple servers is needed (or both).
This commit adds support for enforcing the preference of server
ciphers over the client ones. This way, the server attains control
over the ciphers priority and, thus, can choose more strong cyphers
when a client prioritises less strong ciphers over the more strong
ones, which is beneficial when trying to achieve Perfect Forward
Secrecy.
This commit adds support for setting TLS cipher list string in the
format specified in the OpenSSL
documentation (https://www.openssl.org/docs/man1.1.1/man1/ciphers.html).
The syntax of the cipher list is verified so that specifying the wrong
string will prevent the configuration from being loaded.
This commit adds support for loading DH-parameters (Diffie-Hellman
parameters) via the new "dhparam-file" option within "tls" clause. In
particular, Diffie-Hellman parameters are needed to enable the range
of forward-secrecy enabled cyphers for TLSv1.2, which are getting
silently disabled otherwise.
This commit adds the ability to specify allowed TLS protocols versions
within the "tls" clause. If an unsupported TLS protocol version is
specified in a file, the configuration file will not pass
verification.
Also, this commit adds strict checks for "tls" clauses verification,
in particular:
- it ensures that loading configuration files containing duplicated
"tls" clauses is not allowed;
- it ensures that loading configuration files containing "tls" clauses
missing "cert-file" or "key-file" is not allowed;
- it ensures that loading configuration files containing "tls" clauses
named as "ephemeral" or "none" is not allowed.
Previously a missing/deleted zone which was referenced by a catalog
zone was causing a crash when doing a reload.
This commit will make `named` to ignore the fact that the zone is
missing, and make sure to restore it later on.
check for type "master" / "slave" at the same time as checking
for "primary" / "secondary" as we step through the maps.
Checking "primary" then "master" or "master" then "primary" does
not work as the synomym is not checked for to stop the search.
Similarly with "secondary" and "slave".
