A new option 'min-transfer-rate-in <bytes> <minutes>' has been added
to the view and zone configurations. It can abort incoming zone
transfers which run very slowly due to network related issues, for
example. The default value is set to 10240 bytes in 5 minutes.
Closes#3914
Merge branch '3914-detect-and-restart-stalled-zone-transfers' into 'main'
See merge request isc-projects/bind9!9098
Expose the average transfer rate (in bytes-per-second) during the
last full 'min-transfer-rate-in <bytes> <minutes>' minutes interval.
If no such interval has passed yet, then the overall average rate is
reported instead.
Add a new big zone, run a zone transfer in slow mode, and check
whether the zone transfer gets canceled because 100000 bytes are
not transferred in 5 seconds (as it's running in slow mode).
This new option sets a minimum amount of transfer rate for
an incoming zone transfer that will abort a transfer, which
for some network related reasons run very slowly.
The cache has been updated so that if new data is rejected - for example, because there was already existing data at a higher trust level - then its covering RRSIG will also be rejected.
Closes#5132
Merge branch '5132-improve-cd-behavior' into 'main'
See merge request isc-projects/bind9!9999
Add a new dns_rdataset_equals() function to check whether two
rdatasets are equal in DNSSEC terms.
When an rdataset being cached is rejected because its trust
level is lower than the existing rdataset, we now check to see
whether the rejected data was identical to the existing data.
This allows us to cache a potentially useful RRSIG when handling
CD=1 queries, while still rejecting RRSIGs that would definitely
have resulted in a validation failure.
Rdata slabs used in the QP databases are usually prepended with a slab header, but are sometimes "raw", containing only the rdata and no header. Previously, to allow for them to be used both ways, functions that operated on them took a `reservelen` argument, which would be set to either the header length or to zero, and skipped over that many bytes at the beginning of the buffer. Most such functions were never used on the raw form. To make the code clearer, each of these functions now operates on full slabs with headers, and an alternate "raw" version of the function has been added in cases where that was needed.
In addition, the `dns_rdataslab_merge()` and `_subtract()` functions have been rewritten for clarity and efficiency, and a minor bug has been fixed in `dns_rdataslab_equal()` and `_equalx()`, which could cause an incorrect result if both slabs being compared had zero length.
Merge branch 'each-refactor-rdataslab' into 'main'
See merge request isc-projects/bind9!10084
The "raw" version of the header was used for the noqname and the closest
proofs to save around 152 bytes of the dns_slabheader_t while bringing
an additional complexity. Remove the raw version of the dns_slabheader
API at the slight expense of having unused dns_slabheader_t data sitting
in front of the proofs.
reduce the number of rdata comparisons needed by walking
through the original slab once to determine whether the rdata
in it is duplicated in the slab to be subtracted, and then
write out the rdatas that aren't. previously, this was
done twice: once when determining the size of the target buffer
and then again when copying data into it.
when merging two rdata slabs, we now check once to see
whether an item in the new slab has a duplicate in the
old. previously this was done twice; once to determine the
size of the target buffer required, and then again when
copying the data into it.
we also minimize the number of rdata comparisons necessary,
by remembering which items in the old slab have already been
found to be duplicates.
The function name dns_slabheader_fromrdataset() was too similar
to dns_rdataslab_fromrdataset(). Instead, we now have an rdataset
method 'getheader' which is implemented for slab-type rdatasets.
A new NOHEADER rdataset attribute is set for rdatasets using
raw slabs (i.e., noqname and closest encloser proofs); when
called on rdatasets with that flag set, dns_rdataset_getheader()
returns NULL.
when dns_rdataslab_fromrdataset() is run, in addition to
allocating space for a slab header, it also partially
initializes it, setting the type match rdataset->type and
rdataset->covers, the trust to rdataset->trust, and the TTL to
rdataset->ttl.
there are now two functions for creating an rdataslab from an
rdataset: dns_rdataslab_fromrdataset() creates a full slab (including
space for a slab header), and dns_rdataslab_raw_fromrdataset() creates
a raw slab.
- there are now two functions for getting rdataslab size:
dns_rdataslab_size() is for full slabs and dns_rdataslab_sizeraw()
for raw slabs. there is no longer a need for a reservelen parameter.
- dns_rdataslab_count() also no longer takes a reservelen parameter.
(currently it's never used for raw slabs, so there is no _countraw()
function.)
- dns_rdataslab_rdatasize() has been removed, because
dns_rdataslab_sizeraw() can do the same thing.
- dns_rdataslab_merge() and dns_rdataslab_subtract() both take
slabheader parameters instead of character buffers, and the
reservelen parameter has been removed.
if both rdataslabs being compared have zero length, return true.
also, since these functions are only ever called on slabheaders
with sizeof(dns_slabheader_t) as the reserve length, we can
simplify the API: remove the reservelen argument, and pass the
slabs as type dns_slabheader_t * instead of unsigned char *.
The dns_slabheader object uses the 'next' pointer for two purposes.
In the first header for any given type, 'next' points to the first
header for the next type. But 'down' points to the next header of
the same type, and in that record, 'next' points back up.
This design made the code confusing to read. We now use a union
so that the 'next' pointer can also be called 'up'.
The value returned by http_send_outgoing() is not used anywhere, so we
make it not return anything (void). Probably it is an omission from
older times.
When handling outgoing data, there were a couple of rarely executed
code paths that would not take into account that the callback MUST be
called.
It could lead to potential memory leaks and consequent shutdown hangs.
This commit changes the way how the number of active HTTP streams is
calculated and allows it to scale with the values of the maximum
amount of streams per connection, instead of effectively capping at
STREAM_CLIENTS_PER_CONN.
The original limit, which is intended to define the pipelining limit
for TCP/DoT. However, it appeared to be too restrictive for DoH, as it
works quite differently and implements pipelining at protocol level by
the means of multiplexing multiple streams. That renders each stream
to be effectively a separate connection from the point of view of the
rest of the codebase.
Previously we would limit the amount of incoming data to process based
solely on the presence of not completed send requests. That worked,
however, it was found to severely degrade performance in certain
cases, as was revealed during extended testing.
Now we switch to keeping track of how much data is in flight (or ready
to be in flight) and limit the amount of processed incoming data when
the amount of in flight data surpasses the given threshold, similarly
to like we do in other transports.
In the qpzone implementation of `dns_db_closeversion()`, if there are changed nodes that have no remaining data, delete them.
Closes#5169
Merge branch '5169-qpzone-delete-dead-nodes' into 'main'
See merge request isc-projects/bind9!10089
Removed some code from the cache database implementation that was left over from before it and the zone database implementation were separated.
Merge branch 'each-qpcache-refactor' into 'main'
See merge request isc-projects/bind9!9991
Database versions are not used in cache databases. Some places in
qpcache.c required the version argument to be NULL; others marked it
as UNUSED. Unify all cases to require version to be NULL.
Add new related_headers() function that simplifies the code
flow in qpcache_findrdataset(). Also use check_stale_header() function
to remove code duplication.
Add a helper function both_headers() that unifies the slabheader
matching for simple type: it returns true when both the type and
the matching RRSIG have been found.
The new maybe_update_headers() function unifies the LRU updates to the
slabheaders that was scattered all over the place. More calls to update
headers after bindrdatasets() were also added for completeness.
This removes code duplication between the dual bindrdataset() calls. It
also unifies the handling as there were small differences between the
calls: one variant was checking for !NEGATIVE(found) condition and one
wasn't, and it is technically ok to do the check for all variants.
The check_stale_header() function now updates header_prev directly
so it doesn't have to be handled in the outer loop; it's always
set to the correct value of the previous header in the chain.
some code was left in the cache database implementation after
it was separated from the zone database, and can be cleaned up
and refactored now:
- the DNS_SLABHEADERATTR_IGNORE flag is never set in the cache
- support for loading the cache from was removed, but the add()
function still had a 'loading' flag that's always false
- two different macros were used for checking the
DNS_SLABHEADERATTR_NONEXISTENT flag - EXISTS() and NONEXISTENT().
it's clearer to just use EXISTS().
- the cache doesn't support versions, so it isn't necessary to
walk down the 'down' pointer chain when iterating through the
cache or looking for a header to update. 'down' now only points
to records that are deleted from the cache but have not yet been
purged from memory. this allows us to simplify both the iterator
and the add() function.
The host command was extended to also query for the HTTPS RR type by default.
Merge branch 'feature/main/host-rr-https' into 'main'
See merge request isc-projects/bind9!8642
Unless explicitly specified type from host command, do fourth query for
type HTTPS RR. It is expected it will become more common and some
systems already query that record for every name.
ISC_LOG_WARNING was used while ISC_LOG_DEBUG(3) was implied.
Closes#5145
Merge branch '5145-artem-fix-wrong-logging-severity-in-do_nsfetch' into 'main'
See merge request isc-projects/bind9!10017
The text that stale-cache-enable is set to no has no effect on
max-cache-ttl, but on max-stale-ttl.
Closes#5181
Merge branch '5181-max-stale-ttl-typo-arm' into 'main'
See merge request isc-projects/bind9!10108
Remove code in the QP zone database to handle failures of `dns_qp_insert()` which can't actually happen.
Closes#5171
Merge branch '5171-qpzone-insert-checks' into 'main'
See merge request isc-projects/bind9!10088
in some places there were checks for failures of dns_qp_insert()
after dns_qp_getname(). such failures could only happen if another
thread inserted a node between the two calls, and that can't happen
because the calls are serialized with dns_qpmulti_write(). we can
simplify the code and just add an INSIST.
