After support for route/netlink sockets is merged, not all sockets
will have stats counters associated with them, so it's now necessary
to check whether socket stats exist before incrementing or decrementing
them. rather than relying on the caller for this, we now just pass the
socket and an index, and the correct stats counter will be updated if
it exists.
- The read timer must always be stopped when reading stops.
- Read callbacks can now call isc_nm_read() again in TCP, TCPDNS and
TLSDNS; previously this caused an assertion.
- The wrong failure code could be sent after a UDP recv failure because
the if statements were in the wrong order. the check for a NULL
address needs to be after the check for an error code, otherwise the
result will always be set to ISC_R_EOF.
- When aborting a read or connect because the netmgr is shutting down,
use ISC_R_SHUTTINGDOWN. (ISC_R_CANCELED is now reserved for when the
read has been canceled by the caller.)
- A new function isc_nmhandle_timer_running() has been added enabling a
callback to check whether the timer has been reset after processing a
timeout.
- Incidental netmgr fix: always use isc__nm_closing() instead of
referencing sock->mgr->closing directly
- Corrected a few comments that used outdated function names.
The Windows support has been completely removed from the source tree
and BIND 9 now no longer supports native compilation on Windows.
We might consider reviewing mingw-w64 port if contributed by external
party, but no development efforts will be put into making BIND 9 compile
and run on Windows again.
The isc_nmiface_t type was holding just a single isc_sockaddr_t,
so we got rid of the datatype and use plain isc_sockaddr_t in place
where isc_nmiface_t was used before. This means less type-casting and
shorter path to access isc_sockaddr_t members.
At the same time, instead of keeping the reference to the isc_sockaddr_t
that was passed to us when we start listening, we will keep a local
copy. This prevents the data race on destruction of the ns_interface_t
objects where pending nmsockets could reference the sockaddr of already
destroyed ns_interface_t object.
This commit adds a new configuration option to set the receive and send
buffer sizes on the TCP and UDP netmgr sockets. The default is `0`
which doesn't set any value and just uses the value set by the operating
system.
There's no magic value here - set it too small and the performance will
drop, set it too large, the buffers can fill-up with queries that have
already timeouted on the client side and nobody is interested for the
answer and this would just make the server clog up even more by making
it produce useless work.
The `netstat -su` can be used on POSIX systems to monitor the receive
and send buffer errors.
Network manager events that require interlock (pause, resume, listen)
are now always executed in the same worker thread, mgr->workers[0],
to prevent races.
"stoplistening" events no longer require interlock.
The netmgr listening, stoplistening, pausing and resuming functions
now use barriers for synchronization, which makes the code much simpler.
isc/barrier.h defines isc_barrier macros as a front-end for uv_barrier
on platforms where that works, and pthread_barrier where it doesn't
(including TSAN builds).
This change ensures that a TCP connect callback is called from within
the context of a worker thread in case of a low-level error when
descriptors cannot be created (e.g. when there are too many open file
descriptors).
when running read callbacks, if the event result is not ISC_R_SUCCESS,
the callback is always run asynchronously. this is a problem on timeout,
because there's no chance to reset the timer before the socket has
already been destroyed. this commit allows read callbacks to run
synchronously for both ISC_R_SUCCESS and ISC_R_TIMEDOUT result codes.
This commit changes the taskmgr to run the individual tasks on the
netmgr internal workers. While an effort has been put into keeping the
taskmgr interface intact, couple of changes have been made:
* The taskmgr has no concept of universal privileged mode - rather the
tasks are either privileged or unprivileged (normal). The privileged
tasks are run as a first thing when the netmgr is unpaused. There
are now four different queues in in the netmgr:
1. priority queue - netievent on the priority queue are run even when
the taskmgr enter exclusive mode and netmgr is paused. This is
needed to properly start listening on the interfaces, free
resources and resume.
2. privileged task queue - only privileged tasks are queued here and
this is the first queue that gets processed when network manager
is unpaused using isc_nm_resume(). All netmgr workers need to
clean the privileged task queue before they all proceed normal
operation. Both task queues are processed when the workers are
finished.
3. task queue - only (traditional) task are scheduled here and this
queue along with privileged task queues are process when the
netmgr workers are finishing. This is needed to process the task
shutdown events.
4. normal queue - this is the queue with netmgr events, e.g. reading,
sending, callbacks and pretty much everything is processed here.
* The isc_taskmgr_create() now requires initialized netmgr (isc_nm_t)
object.
* The isc_nm_destroy() function now waits for indefinite time, but it
will print out the active objects when in tracing mode
(-DNETMGR_TRACE=1 and -DNETMGR_TRACE_VERBOSE=1), the netmgr has been
made a little bit more asynchronous and it might take longer time to
shutdown all the active networking connections.
* Previously, the isc_nm_stoplistening() was a synchronous operation.
This has been changed and the isc_nm_stoplistening() just schedules
the child sockets to stop listening and exits. This was needed to
prevent a deadlock as the the (traditional) tasks are now executed on
the netmgr threads.
* The socket selection logic in isc__nm_udp_send() was flawed, but
fortunatelly, it was broken, so we never hit the problem where we
created uvreq_t on a socket from nmhandle_t, but then a different
socket could be picked up and then we were trying to run the send
callback on a socket that had different threadid than currently
running.
The isc_nm_tlsdnsconnect() call could end up with two connect callbacks
called when the timeout fired and the TCP connection was aborted,
but the TLS handshake was not complete yet. isc__nm_connecttimeout_cb()
forgot to clean up sock->tls.pending_req when the connect callback was
called with ISC_R_TIMEDOUT, leading to a second callback running later.
A new argument has been added to the isc__nm_*_failed_connect_cb and
isc__nm_*_failed_read_cb functions, to indicate whether the callback
needs to run asynchronously or not.
The isc_nm_*connect() functions were refactored to always return the
connection status via the connect callback instead of sometimes returning
the hard failure directly (for example, when the socket could not be
created, or when the network manager was shutting down).
This commit changes the connect functions in all the network manager
modules, and also makes the necessary refactoring changes in places
where the connect functions are called.
The TCP module has been updated to use the generic functions from
netmgr.c instead of its own local copies. This brings the module
mostly up to par with the TCPDNS and TLSDNS modules.
Serveral problems were discovered and fixed after the change in
the connection timeout in the previous commits:
* In TLSDNS, the connection callback was not called at all under some
circumstances when the TCP connection had been established, but the
TLS handshake hadn't been completed yet. Additional checks have
been put in place so that tls_cycle() will end early when the
nmsocket is invalidated by the isc__nm_tlsdns_shutdown() call.
* In TCP, TCPDNS and TLSDNS, new connections would be established
even when the network manager was shutting down. The new
call isc__nm_closing() has been added and is used to bail out
early even before uv_tcp_connect() is attempted.
Similarly to the read timeout, it's now possible to recover from
ISC_R_TIMEDOUT event by restarting the timer from the connect callback.
The change here also fixes platforms that missing the socket() options
to set the TCP connection timeout, by moving the timeout code into user
space. On platforms that support setting the connect timeout via a
socket option, the timeout has been hardcoded to 2 minutes (the maximum
value of tcp-initial-timeout).
Previously, when the client timed out on read, the client socket would
be automatically closed and destroyed when the nmhandle was detached.
This commit changes the logic so that it's possible for the callback to
recover from the ISC_R_TIMEDOUT event by restarting the timer. This is
done by calling isc_nmhandle_settimeout(), which prevents the timeout
handling code from destroying the socket; instead, it continues to wait
for data.
One specific use case for multiple timeouts is serve-stale - the client
socket could be created with shorter timeout (as specified with
stale-answer-client-timeout), so we can serve the requestor with stale
answer, but keep the original query running for a longer time.
After the TCPDNS refactoring the initial and idle timers were broken and
only the tcp-initial-timeout was always applied on the whole TCP
connection.
This broke any TCP connection that took longer than tcp-initial-timeout,
most often this would affect large zone AXFRs.
This commit changes the timeout logic in this way:
* On TCP connection accept the tcp-initial-timeout is applied
and the timer is started
* When we are processing and/or sending any DNS message the timer is
stopped
* When we stop processing all DNS messages, the tcp-idle-timeout
is applied and the timer is started again
- style, cleanup, and removal of unnecessary code.
- combined isc_nm_http_add_endpoint() and isc_nm_http_add_doh_endpoint()
into one function, renamed isc_http_endpoint().
- moved isc_nm_http_connect_send_request() into doh_test.c as a helper
function; remove it from the public API.
- renamed isc_http2 and isc_nm_http2 types and functions to just isc_http
and isc_nm_http, for consistency with other existing names.
- shortened a number of long names.
- the caller is now responsible for determining the peer address.
in isc_nm_httpconnect(); this eliminates the need to parse the URI
and the dependency on an external resolver.
- the caller is also now responsible for creating the SSL client context,
for consistency with isc_nm_tlsdnsconnect().
- added setter functions for HTTP/2 ALPN. instead of setting up ALPN in
isc_tlsctx_createclient(), we now have a function
isc_tlsctx_enable_http2client_alpn() that can be run from
isc_nm_httpconnect().
- refactored isc_nm_httprequest() into separate read and send functions.
isc_nm_send() or isc_nm_read() is called on an http socket, it will
be stored until a corresponding isc_nm_read() or _send() arrives; when
we have both halves of the pair the HTTP request will be initiated.
- isc_nm_httprequest() is renamed isc__nm_http_request() for use as an
internal helper function by the DoH unit test. (eventually doh_test
should be rewritten to use read and send, and this function should
be removed.)
- added implementations of isc__nm_tls_settimeout() and
isc__nm_http_settimeout().
- increased NGHTTP2 header block length for client connections to 128K.
- use isc_mem_t for internal memory allocations inside nghttp2, to
help track memory leaks.
- send "Cache-Control" header in requests and responses. (note:
currently we try to bypass HTTP caching proxies, but ideally we should
interact with them: https://tools.ietf.org/html/rfc8484#section-5.1)
This commit completes the support for DNS-over-HTTP(S) built on top of
nghttp2 and plugs it into the BIND. Support for both GET and POST
requests is present, as required by RFC8484.
Both encrypted (via TLS) and unencrypted HTTP/2 connections are
supported. The latter are mostly there for debugging/troubleshooting
purposes and for the means of encryption offloading to third-party
software (as might be desirable in some environments to simplify TLS
certificates management).
This commit includes work-in-progress implementation of
DNS-over-HTTP(S).
Server-side code remains mostly untested, and there is only support
for POST requests.
On Windows, we were limiting the number of listening children to just 1,
but we were then iterating on mgr->nworkers. That lead to scheduling
more async_*listen() than actually allocated and out-of-bound read-write
operation on the heap.
When we were in nmthread, the isc__nm_async_<proto>connect() function
executes in the same thread as the isc__nm_<proto>connect() and on a
failure, it would block indefinitely because the failure branch was
setting sock->active to false before the condition around the wait had a
chance to skip the WAIT().
This also fixes the zero system test being stuck on FreeBSD 11, so we
re-enable the test in the commit.
On platforms without load-balancing socket all the queries would be
handle by a single thread. Currently, the support for load-balanced
sockets is present in Linux with SO_REUSEPORT and FreeBSD 12 with
SO_REUSEPORT_LB.
This commit adds workaround for such platforms that:
1. setups single shared listening socket for all listening nmthreads for
UDP, TCP and TCPDNS netmgr transports
2. Calls uv_udp_bind/uv_tcp_bind on the underlying socket just once and
for rest of the nmthreads only copy the internal libuv flags (should
be just UV_HANDLE_BOUND and optionally UV_HANDLE_IPV6).
3. start reading on UDP socket or listening on TCP socket
The load distribution among the nmthreads is uneven, but it's still
better than utilizing just one thread for processing all the incoming
queries
This is a part of the works that intends to make the netmgr stable,
testable, maintainable and tested. It contains a numerous changes to
the netmgr code and unfortunately, it was not possible to split this
into smaller chunks as the work here needs to be committed as a complete
works.
NOTE: There's a quite a lot of duplicated code between udp.c, tcp.c and
tcpdns.c and it should be a subject to refactoring in the future.
The changes that are included in this commit are listed here
(extensively, but not exclusively):
* The netmgr_test unit test was split into individual tests (udp_test,
tcp_test, tcpdns_test and newly added tcp_quota_test)
* The udp_test and tcp_test has been extended to allow programatic
failures from the libuv API. Unfortunately, we can't use cmocka
mock() and will_return(), so we emulate the behaviour with #define and
including the netmgr/{udp,tcp}.c source file directly.
* The netievents that we put on the nm queue have variable number of
members, out of these the isc_nmsocket_t and isc_nmhandle_t always
needs to be attached before enqueueing the netievent_<foo> and
detached after we have called the isc_nm_async_<foo> to ensure that
the socket (handle) doesn't disappear between scheduling the event and
actually executing the event.
* Cancelling the in-flight TCP connection using libuv requires to call
uv_close() on the original uv_tcp_t handle which just breaks too many
assumptions we have in the netmgr code. Instead of using uv_timer for
TCP connection timeouts, we use platform specific socket option.
* Fix the synchronization between {nm,async}_{listentcp,tcpconnect}
When isc_nm_listentcp() or isc_nm_tcpconnect() is called it was
waiting for socket to either end up with error (that path was fine) or
to be listening or connected using condition variable and mutex.
Several things could happen:
0. everything is ok
1. the waiting thread would miss the SIGNAL() - because the enqueued
event would be processed faster than we could start WAIT()ing.
In case the operation would end up with error, it would be ok, as
the error variable would be unchanged.
2. the waiting thread miss the sock->{connected,listening} = `true`
would be set to `false` in the tcp_{listen,connect}close_cb() as
the connection would be so short lived that the socket would be
closed before we could even start WAIT()ing
* The tcpdns has been converted to using libuv directly. Previously,
the tcpdns protocol used tcp protocol from netmgr, this proved to be
very complicated to understand, fix and make changes to. The new
tcpdns protocol is modeled in a similar way how tcp netmgr protocol.
Closes: #2194, #2283, #2318, #2266, #2034, #1920
* The tcp and tcpdns is now not using isc_uv_import/isc_uv_export to
pass accepted TCP sockets between netthreads, but instead (similar to
UDP) uses per netthread uv_loop listener. This greatly reduces the
complexity as the socket is always run in the associated nm and uv
loops, and we are also not touching the libuv internals.
There's an unfortunate side effect though, the new code requires
support for load-balanced sockets from the operating system for both
UDP and TCP (see #2137). If the operating system doesn't support the
load balanced sockets (either SO_REUSEPORT on Linux or SO_REUSEPORT_LB
on FreeBSD 12+), the number of netthreads is limited to 1.
* The netmgr has now two debugging #ifdefs:
1. Already existing NETMGR_TRACE prints any dangling nmsockets and
nmhandles before triggering assertion failure. This options would
reduce performance when enabled, but in theory, it could be enabled
on low-performance systems.
2. New NETMGR_TRACE_VERBOSE option has been added that enables
extensive netmgr logging that allows the software engineer to
precisely track any attach/detach operations on the nmsockets and
nmhandles. This is not suitable for any kind of production
machine, only for debugging.
* The tlsdns netmgr protocol has been split from the tcpdns and it still
uses the old method of stacking the netmgr boxes on top of each other.
We will have to refactor the tlsdns netmgr protocol to use the same
approach - build the stack using only libuv and openssl.
* Limit but not assert the tcp buffer size in tcp_alloc_cb
Closes: #2061
When calling the high level netmgr functions, the callback would be
sometimes called synchronously if we catch the failure directly, or
asynchronously if it happens later. The synchronous call to the
callback could create deadlocks as the caller would not expect the
failed callback to be executed directly.
this function sets the read timeout for the socket associated
with a netmgr handle and, if the timer is running, resets it.
for TCPDNS sockets it also sets the read timeout and resets the
timer on the outer TCP socket.
When we are operating on the tcpdns socket, we need to double check
whether the socket or its outerhandle or its listener or its mgr is
still active and when not, bail out early.
There were more races that could happen while connecting to a
socket while closing or shutting down the same socket. This
commit introduces a .closing flag to guard the socket from
being closed twice.
There was a data race where a new event could be scheduled after
isc__nm_async_shutdown() had cleaned up all the dangling UDP/TCP
sockets from the loop.
- don't bother closing sockets that are already closing.
- UDP read timeout timer was not stopped after reading.
- improve handling of TCP connection failures.
- isc_nm_tcpdnsconnect() sets up up an outgoing TCP DNS connection.
- isc_nm_tcpconnect(), _udpconnect() and _tcpdnsconnect() now take a
timeout argument to ensure connections time out and are correctly
cleaned up on failure.
- isc_nm_read() now supports UDP; it reads a single datagram and then
stops until the next time it's called.
- isc_nm_cancelread() now runs asynchronously to prevent assertion
failure if reading is interrupted by a non-network thread (e.g.
a timeout).
- isc_nm_cancelread() can now apply to UDP sockets.
- added shim code to support UDP connection in versions of libuv
prior to 1.27, when uv_udp_connect() was added
all these functions will be used to support outgoing queries in dig,
xfrin, dispatch, etc.
When client disconnects before the connection can be accepted, the named
would log a spurious log message:
error: Accepting TCP connection failed: socket is not connected
We now ignore the ISC_R_NOTCONNECTED result code and log only other
errors
1. The isc__nm_tcp_send() and isc__nm_tcp_read() was not checking
whether the socket was still alive and scheduling reads/sends on
closed socket.
2. The isc_nm_read(), isc_nm_send() and isc_nm_resumeread() have been
changed to always return the error conditions via the callbacks, so
they always succeed. This applies to all protocols (UDP, TCP and
TCPDNS).
There were two problems how tcp_send_direct() was used:
1. The tcp_send_direct() can return ISC_R_CANCELED (or translated error
from uv_tcp_send()), but the isc__nm_async_tcpsend() wasn't checking
the error code and not releasing the uvreq in case of an error.
2. In isc__nm_tcp_send(), when the TCP send is already in the right
netthread, it uses tcp_send_direct() to send the TCP packet right
away. When that happened the uvreq was not freed, and the error code
was returned to the caller. We need to return ISC_R_SUCCESS and
rather use the callback to report an error in such case.
When closing the socket that is actively reading from the stream, the
read_cb() could be called between uv_close() and close callback when the
server socket has been already detached hence using sock->statichandle
after it has been already freed.
When networking statistics was added to the netmgr (in commit
5234a8e00a6ae1df738020f27544594ccb8d5215), two lines were added that
increment the 'STATID_RECVFAIL' statistic: One if 'uv_read_start'
fails and one at the end of the 'read_cb'. The latter happens
if 'nread < 0'.
According to the libuv documentation, I/O read callbacks (such as for
files and sockets) are passed a parameter 'nread'. If 'nread' is less
than 0, there was an error and 'UV_EOF' is the end of file error, which
you may want to handle differently.
In other words, we should not treat EOF as a RECVFAIL error.
If we clone the csock (children socket) in TCP accept_connection()
instead of passing the ssock (server socket) to the call back and
cloning it there we unbreak the assumption that every socket is handled
inside it's own worker thread and therefore we can get rid of (at least)
callback locking.
The isc__nm_tcpdns_stoplistening() would call isc__nmsocket_clearcb()
that would clear the .accept_cb from non-netmgr thread. Change the
tcpdns_stoplistening to enqueue ievent that would get processed in the
right netmgr thread to avoid locking.
On POSIX based systems both uv_os_sock_t and uv_os_fd_t are both typedef
to int. That's not true on Windows, where uv_os_sock_t is SOCKET and
uv_os_fd_t is HANDLE and they differ in level of indirection.
The isc__nm_socket_freebind() has been refactored to match other
isc__nm_socket_...() helper functions and take uv_os_fd_t and
sa_family_t as function arguments.
