This commit adds support for Strict/Mutual TLS to dig.
The new command-line options and their behaviour are modelled after
kdig (+tls-ca, +tls-hostname, +tls-certfile, +tls-keyfile) for
compatibility reasons. That is, using +tls-* is sufficient to enable
DoT in dig, implying +tls-ca
If there is no other DNS transport specified via command-line,
specifying any of +tls-* options makes dig use DoT. In this case, its
behaviour is the same as if +tls-ca is specified: that is, the remote
peer's certificate is verified using the platform-specific
intermediate CA certificates store. This behaviour is introduced for
compatibility with kdig.
C11 has builtin support for _Noreturn function specifier with
convenience noreturn macro defined in <stdnoreturn.h> header.
Replace ISC_NORETURN macro by C11 noreturn with fallback to
__attribute__((noreturn)) if the C11 support is not complete.
For the reference, the _cancel_lookup() function iterates through
the lookup's queries list and detaches them. In the ideal scenario,
that should be the last reference and the query will be destroyed
after that, but it is also possible that we are still expecting a
callback, which also holds a reference (for example, _cancel_lookup()
could have been called from recv_done(), when send_done() was still
not executed).
The start_udp() and start_tcp() functions are currently designed in
slightly different ways: start_udp() creates a new query attachment
`connectquery`, to be called in the callback function, while
start_tcp() does not, which is a bug, but is hidden by the fact
that when the query is being erroneously destroyed prematurely (before
_cancel_lookup() is called) in the result of that, it also gets
de-listed from the lookup's queries' list, so _cancel_lookup() doesn't
even try to detach it.
For better understanding, here's an illustration of the query's
references count changes, and from where it was changed:
UDP
---
1. _new_query() -> refcount = 1 (initial)
2. start_udp() -> refcount = 2 (lookup->current_query)
3. start_udp() -> refcount = 3 (connectquery)
4. udp_ready() -> refcount = 4 (readquery)
5. udp_ready() -> refcount = 5 (sendquery)
6. udp_ready() -> refcount = 4 (lookup->current_query)
7. udp_ready() -> refcount = 3 (connectquery)
8. send_done() -> refcount = 2 (sendquery)
9. recv_done() -> refcount = 1 (readquery)
10. _cancel_lookup() -> refcount = 0 (initial)
11. the query gets destroyed and removed from `lookup->q`
TCP, fortunate scenario
-----------------------
1. _new_query() -> refcount = 1 (initial)
2. start_tcp() -> refcount = 2 (lookup->current_query)
3. launch_next_query() -> refcount = 3 (readquery)
4. launch_next_query() -> refcount = 4 (sendquery)
5. tcp_connected() -> refcount = 3 (lookup->current_query)
6. tcp_connected() -> refcount = 2 (bug, there was no connectquery)
7. send_done() -> refcount = 1 (sendquery)
8. recv_done() -> refcount = 0 (readquery)
9. the query gets prematurely destroyed and removed from `lookup->q`
10. _cancel_lookup() -> the query is not in `lookup->q`
TCP, unfortunate scenario, revealing the bug
--------------------------------------------
1. _new_query() -> refcount = 1 (initial)
2. start_tcp() -> refcount = 2 (lookup->current_query)
3. launch_next_query() -> refcount = 3 (readquery)
4. launch_next_query() -> refcount = 4 (sendquery)
5. tcp_connected() -> refcount = 3 (lookup->current_query)
6. tcp_connected() -> refcount = 2 (bug, there was no connectquery)
7. recv_done() -> refcount = 1 (readquery)
8. _cancel_lookup() -> refcount = 0 (the query was in `lookup->q`)
9. we hit an assertion here when trying to destroy the query, because
sendhandle is not detached (which is done by send_done()).
10. send_done() -> this never happens
This commit does the following:
1. Add a `connectquery` attachment in start_tcp(), like done in
start_udp().
2. Add missing _cancel_lookup() calls for error scenarios, which
were possibly missing because before fixing the bug, calling
_cancel_lookup() and then calling query_detach() would cause
an assertion.
3. Log a debug message and call isc_nm_cancelread(query->readhandle)
for every query in the lookup from inside the _cancel_lookup()
function, like it is done in _cancel_all().
4. Add a `canceled` property for the query which becomes `true` when
the lookup (and subsequently, its queries) are canceled.
5. Use the `canceled` property in the network manager callbacks to
know that the query was canceled, and act like `eresult` was equal
to `ISC_R_CANCELED`.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Unify the header guard style and replace the inconsistent include guards
with #pragma once.
The #pragma once is widely and very well supported in all compilers that
BIND 9 supports, and #pragma once was already in use in several new or
refactored headers.
Using simpler method will also allow us to automate header guard checks
as this is simpler to programatically check.
For reference, here are the reasons for the change taken from
Wikipedia[1]:
> In the C and C++ programming languages, #pragma once is a non-standard
> but widely supported preprocessor directive designed to cause the
> current source file to be included only once in a single compilation.
>
> Thus, #pragma once serves the same purpose as include guards, but with
> several advantages, including: less code, avoidance of name clashes,
> and sometimes improvement in compilation speed. On the other hand,
> #pragma once is not necessarily available in all compilers and its
> implementation is tricky and might not always be reliable.
1. https://en.wikipedia.org/wiki/Pragma_once
dig previously ran isc_nm_udpconnect() three times before giving
up, to work around a freebsd bug that caused connect() to return
a spurious transient EADDRINUSE. this commit moves the retry code
into the network manager itself, so that isc_nm_udpconnect() no
longer needs to return a result code.
* Following the example set in 634bdfb16d, the tlsdns netmgr
module now uses libuv and SSL primitives directly, rather than
opening a TLS socket which opens a TCP socket, as the previous
model was difficult to debug. Closes#2335.
* Remove the netmgr tls layer (we will have to re-add it for DoH)
* Add isc_tls API to wrap the OpenSSL SSL_CTX object into libisc
library; move the OpenSSL initialization/deinitialization from dstapi
needed for OpenSSL 1.0.x to the isc_tls_{initialize,destroy}()
* Add couple of new shims needed for OpenSSL 1.0.x
* When LibreSSL is used, require at least version 2.7.0 that
has the best OpenSSL 1.1.x compatibility and auto init/deinit
* Enforce OpenSSL 1.1.x usage on Windows
* Added a TLSDNS unit test and implemented a simple TLSDNS echo
server and client.
FreeBSD sometimes returns spurious errors in UDP connect() attempts,
so we try a few times before giving up. However, each failed attempt
triggers a call to udp_ready() in dighost.c, and that was causing
the query object to be detached prematurely.
Sometimes, the dig_lookup_t could be destroyed before the final
send_done() callback was be called, leading to dereferencing an
already freed dig_lookup_t object. By making the dig_lookup_t
reference counted, we are ensuring that it won't be freed until
the last reference (from dig_query_t .lookup) is released.
because dig now uses the netmgr, printing of response messages
happens in a different thread than setup. the IDN output filtering
procedure, which set using dns_name_settotextfilter(), is stored as
thread-local data, and so if it's set during setup, it won't be
accessible when printing. we now set it immediately before printing,
in the same thread, and clear it immedately afterward.
The network manager does not support returning UDP datagrams to
clients from unexpected sources; it is therefore not possible for
dig to accept them. The "+[no]unexpected" option has therefore
been removed from the dig command and its documentation.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
