Previously, only a single controlconf message would be processed from a
single TCP read even if the TCP read buffer contained multiple messages.
Refactor the isccc_ccmsg unit to store the extra buffer in the internal
buffer and use the already read data first before reading from the
network again.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Dominik Thalhammer <dominik@thalhammer.it>
When shutting down the whole server, the reading could stop and detach
from controlconnection before sending is done. If send callback then
detaches from the last controlconnection handle, the ccmsg would be
invalidated after the send callback and thus we must not access ccmsg
after calling the send_cb().
We need to stop reading when calling isc_ccmsg_disconnect() as the
reading handle doesn't have to be last because sending might be in
progress. After that, we can safely remove .reading member because the
reading would not be called after the disconnect has been called.
The ccmsg_senddone() should also not call the recv callback if the
sending failed, that's the job of the caller's send callback - in fact
it already does that, so the code in ccmsg_senddone() was superfluous.
The conn_shutdown() function is called whenever a control channel
connection is supposed to be closed, e.g. after a response to the client
is sent or when named is being shut down. That function calls
isccc_ccmsg_invalidate(), which resets the magic number in the structure
holding the messages exchanged over a given control channel connection
(isccc_ccmsg_t). The expectation here is that all operations related to
the given control channel connection will have been completed by the
time the connection needs to be shut down.
However, if named shutdown is initiated while a control channel message
is still in flight, some netmgr callbacks might still be pending when
conn_shutdown() is called and isccc_ccmsg_t invalidated. This causes
the REQUIRE assertion checking the magic number in ccmsg_senddone() to
fail when the latter function is eventually called, resulting in a
crash.
Fix by splitting up isccc_ccmsg_invalidate() into two separate
functions:
- isccc_ccmsg_disconnect(), which initiates TCP connection shutdown,
- isccc_ccmsg_invalidate(), which cleans up magic number and buffer,
and then:
- replacing all existing uses of isccc_ccmsg_invalidate() with calls
to isccc_ccmsg_disconnect(),
- only calling isccc_ccmsg_invalidate() when all netmgr callbacks are
guaranteed to have been run.
Adjust function comments accordingly.
When shutting down TCP sockets, the read callback calling logic was
flawed, it would call either one less callback or one extra. Fix the
logic in the way:
1. When isc_nm_read() has been called but isc_nm_read_stop() hasn't on
the handle, the read callback will be called with ISC_R_CANCELED to
cancel active reading from the socket/handle.
2. When isc_nm_read() has been called and isc_nm_read_stop() has been
called on the on the handle, the read callback will be called with
ISC_R_SHUTTINGDOWN to signal that the dormant (not-reading) socket
is being shut down.
3. The .reading and .recv_read flags are little bit tricky. The
.reading flag indicates if the outer layer is reading the data (that
would be uv_tcp_t for TCP and isc_nmsocket_t (TCP) for TLSStream),
the .recv_read flag indicates whether somebody is interested in the
data read from the socket.
Usually, you would expect that the .reading should be false when
.recv_read is false, but it gets even more tricky with TLSStream as
the TLS protocol might need to read from the socket even when sending
data.
Fix the usage of the .recv_read and .reading flags in the TLSStream
to their true meaning - which mostly consist of using .recv_read
everywhere and then wrapping isc_nm_read() and isc_nm_read_stop()
with the .reading flag.
4. The TLS failed read helper has been modified to resemble the TCP code
as much as possible, clearing and re-setting the .recv_read flag in
the TCP timeout code has been fixed and .recv_read is now cleared
when isc_nm_read_stop() has been called on the streaming socket.
5. The use of Network Manager in the named_controlconf, isccc_ccmsg, and
isc_httpd units have been greatly simplified due to the improved design.
6. More unit tests for TCP and TLS testing the shutdown conditions have
been added.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Artem Boldariev <artem@isc.org>
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
The isc_buffer_reserve() would be passed a reference to the buffer
pointer, which was unnecessary as the pointer would never be changed
in the current implementation. Remove the extra dereference.
The HMACs and GSSAPI are just using unallocated values.
Moving them around shouldn't cause issues.
Only the dnssec system test knew the internal number in use for hmacmd5.
After the loopmgr work has been merged, we can now cleanup the TCP and
TLS protocols a little bit, because there are stronger guarantees that
the sockets will be kept on the respective loops/threads. We only need
asynchronous call for listening sockets (start, stop) and reading from
the TCP (because the isc_nm_read() might be called from read callback
again.
This commit does the following changes (they are intertwined together):
1. Cleanup most of the asynchronous events in the TCP code, and add
comments for the events that needs to be kept asynchronous.
2. Remove isc_nm_resumeread() from the netmgr API, and replace
isc_nm_resumeread() calls with existing isc_nm_read() calls.
3. Remove isc_nm_pauseread() from the netmgr API, and replace
isc_nm_pauseread() calls with a new isc_nm_read_stop() call.
4. Disable the isc_nm_cancelread() for the streaming protocols, only the
datagram-like protocols can use isc_nm_cancelread().
5. Add isc_nmhandle_close() that can be used to shutdown the socket
earlier than after the last detach. Formerly, the socket would be
closed only after all reading and sending would be finished and the
last reference would be detached. The new isc_nmhandle_close() can
be used to close the underlying socket earlier, so all the other
asynchronous calls would call their respective callbacks immediately.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Artem Boldariev <artem@isc.org>
There were a number of places that had copies of various ASCII
tables (case conversion, hex and decimal conversion) that are intended
to be faster than the ctype.h macros, or avoid locale pollution.
Move them into libisc, and wrap the lookup tables with macros that
avoid the ctype.h gotchas.
Historically, the inline keyword was a strong suggestion to the compiler
that it should inline the function marked inline. As compilers became
better at optimising, this functionality has receded, and using inline
as a suggestion to inline a function is obsolete. The compiler will
happily ignore it and inline something else entirely if it finds that's
a better optimisation.
Therefore, remove all the occurences of the inline keyword with static
functions inside single compilation unit and leave the decision whether
to inline a function or not entirely on the compiler
NOTE: We keep the usage the inline keyword when the purpose is to change
the linkage behaviour.
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
When the dispatch code was refactored in libdns, the netmgr was changed
to return ISC_R_SHUTTINGDOWN when the netmgr is shutting down, and the
ISC_R_CANCELED is now reserved only for situation where the callback was
canceled by the caller.
This change wasn't reflected in the controlconf.c channel which was
still looking for ISC_R_CANCELED as the shutdown event.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
OpenSSL 3.0.1 does not accept 0 as a digest buffer length when
calling EVP_DigestSignFinal as it now checks that the digest buffer
length is large enough for the digest. Pass the digest buffer
length instead.
Unify the header guard style and replace the inconsistent include guards
with #pragma once.
The #pragma once is widely and very well supported in all compilers that
BIND 9 supports, and #pragma once was already in use in several new or
refactored headers.
Using simpler method will also allow us to automate header guard checks
as this is simpler to programatically check.
For reference, here are the reasons for the change taken from
Wikipedia[1]:
> In the C and C++ programming languages, #pragma once is a non-standard
> but widely supported preprocessor directive designed to cause the
> current source file to be included only once in a single compilation.
>
> Thus, #pragma once serves the same purpose as include guards, but with
> several advantages, including: less code, avoidance of name clashes,
> and sometimes improvement in compilation speed. On the other hand,
> #pragma once is not necessarily available in all compilers and its
> implementation is tricky and might not always be reliable.
1. https://en.wikipedia.org/wiki/Pragma_once
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
Both <isccc/util.h> and <isc/util.h> defined DE_CONST() macro. As
<isccc/util.h> header includes <isc/util.h>, remove the macro from
<isccc/util.h> header.
The native PKCS#11 support has been removed in favour of better
maintained, more performance and easier to use OpenSSL PKCS#11 engine
from the OpenSC project.
The Makefile.tests was modifying global AM_CFLAGS and LDADD and could
accidentally pull /usr/include to be listed before the internal
libraries, which is known to cause problems if the headers from the
previous version of BIND 9 has been installed on the build machine.
The Windows support has been completely removed from the source tree
and BIND 9 now no longer supports native compilation on Windows.
We might consider reviewing mingw-w64 port if contributed by external
party, but no development efforts will be put into making BIND 9 compile
and run on Windows again.
The BIND 9 libraries are considered to be internal only and hence the
API and ABI changes a lot. Keeping track of the API/ABI changes takes
time and it's a complicated matter as the safest way to make everything
stable would be to bump any library in the dependency chain as in theory
if libns links with libdns, and a binary links with both, and we bump
the libdns SOVERSION, but not the libns SOVERSION, the old libns might
be loaded by binary pulling old libdns together with new libdns loaded
by the binary. The situation gets even more complicated with loading
the plugins that have been compiled with few versions old BIND 9
libraries and then dynamically loaded into the named.
We are picking the safest option possible and usable for internal
libraries - instead of using -version-info that has only a weak link to
BIND 9 version number, we are using -release libtool option that will
embed the corresponding BIND 9 version number into the library name.
That means that instead of libisc.so.1701 (as an example) the library
will now be named libisc-9.17.10.so.
This commit extends the perl Configure script to also check for libssl
in addition to libcrypto and change the vcxproj source files to link
with both libcrypto and libssl.
1. The isc__nm_tcp_send() and isc__nm_tcp_read() was not checking
whether the socket was still alive and scheduling reads/sends on
closed socket.
2. The isc_nm_read(), isc_nm_send() and isc_nm_resumeread() have been
changed to always return the error conditions via the callbacks, so
they always succeed. This applies to all protocols (UDP, TCP and
TCPDNS).
Since Mac OS X 10.1, Mach-O object files are by default built with a
so-called two-level namespace which prevents symbol lookups in BIND unit
tests that attempt to override the implementations of certain library
functions from working as intended. This feature can be disabled by
passing the "-flat_namespace" flag to the linker. Fix unit tests
affected by this issue on macOS by adding "-flat_namespace" to LDFLAGS
used for building all object files on that operating system (it is not
enough to only set that flag for the unit test executables).
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
control channel connection objects now contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- cmdhandle: held while an rndc command is running
httpd connections contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- using an isc_task to execute all rndc functions makes it relatively
simple for them to acquire task exclusive mode when needed
- control_recvmessage() has been separated into two functions,
control_recvmessage() and control_respond(). the respond function
can be called immediately from control_recvmessage() when processing
a nonce, or it can be called after returning from the task event
that ran the rndc command function.
- updated libisccc to use netmgr events
- updated rndc to use isc_nm_tcpconnect() to establish connections
- updated control channel to use isc_nm_listentcp()
open issues:
- the control channel timeout was previously 60 seconds, but it is now
overridden by the TCP idle timeout setting, which defaults to 30
seconds. we should add a function that sets the timeout value for
a specific listener socket, instead of always using the global value
set in the netmgr. (for the moment, since 30 seconds is a reasonable
timeout for the control channel, I'm not prioritizing this.)
- the netmgr currently has no support for UNIX-domain sockets; until
this is addressed, it will not be possible to configure rndc to use
them. we will need to either fix this or document the change in
behavior.
Make various adjustments necessary to enable "make dist" to build a BIND
source tarball whose contents are complete enough to build binaries, run
unit & system tests, and generate documentation on Unix systems.
Known outstanding issues:
- "make distcheck" does not work yet.
- Tests do not work for out-of-tree source-tarball-based builds.
- Source tarballs are not complete enough for building on Windows.
All of the above will be addressed in due course.
