'-T transferinsecs' makes named interpret the max-transfer-time-out,
max-transfer-idle-out, max-transfer-time-in and max-transfer-idle-in
configuration options as seconds instead of minutes.
'-T transferslowly' makes named to sleep for one second for every
xfrout message.
'-T transferstuck' makes named to sleep for one minute for every
xfrout message.
isc_loopmgr_pause can't be called before isc_loopmgr_run is
called as the thread ids are not yet valid. If there is a
fatal error before isc_loopmgr_run is run then don't call
isc_loopmgr_pause.
Cleanup the remnants of MS Compiler bits from <isc/refcount.h>, printing
the information in named/main.c, and cleanup some comments about Windows
that no longer apply.
The bits in picohttpparser.{h,c} were left out, because it's not our
code.
The isc_time_now() and isc_time_now_hires() were used inconsistently
through the code - either with status check, or without status check,
or via TIME_NOW() macro with RUNTIME_CHECK() on failure.
Refactor the isc_time_now() and isc_time_now_hires() to always fail when
getting current time has failed, and return the isc_time_t value as
return value instead of passing the pointer to result in the argument.
It's sometimes helpful to get a quick idea of the call stack when
debugging. This change factors out the backtrace logging from named's
fatal error handler so that it's easy to use in other places too.
Completely remove the TKEY Mode 2 (Diffie-Hellman Exchanged Keying) from
BIND 9 (from named, named.conf and all the tools). The TKEY usage is
fringe at best and in all known cases, GSSAPI is being used as it should.
The draft-eastlake-dnsop-rfc2930bis-tkey specifies that:
4.2 Diffie-Hellman Exchanged Keying (Deprecated)
The use of this mode (#2) is NOT RECOMMENDED for the following two
reasons but the specification is still included in Appendix A in case
an implementation is needed for compatibility with old TKEY
implementations. See Section 4.6 on ECDH Exchanged Keying.
The mixing function used does not meet current cryptographic
standards because it uses MD5 [RFC6151].
RSA keys must be excessively long to achieve levels of security
required by current standards.
We might optionally implement Elliptic Curve Diffie-Hellman (ECDH) key
exchange mode 6 if the draft ever reaches the RFC status. Meanwhile the
insecure DH mode needs to be removed.
Named now logs both compile time and run time UV versions when
starting up. This is useful information to have when debugging
network issues involving named.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
the built-in trust anchors in named and delv are sufficent for
validation. named still needs to be able to load trust anchors from
a bind.keys file for testing purposes, but it doesn't need to be
the default behavior.
we now only load trust anchors from a file if explicitly specified
via the "bindkeys-file" option in named or the "-a" command line
argument to delv. documentation has been cleaned up to remove references
to /etc/bind.keys.
Closes#3850.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
The only function left in the isc_resource API was setting the file
limit. Replace the whole unit with a simple getrlimit to check the
maximum value of RLIMIT_NOFILE and set the maximum back to rlimit_cur.
This is more compatible than trying to set RLIMIT_UNLIMITED on the
RLIMIT_NOFILE as it doesn't work on Linux (see man 5 proc on
/proc/sys/fs/nr_open), neither it does on Darwin kernel (see man 2
getrlimit).
The only place where the maximum value could be raised under privileged
user would be BSDs, but the `named_os_adjustnofile()` were not called
there before. We would apply the increased limits only on Linux and Sun
platforms.
After deprecating the operating system limits settings (coresize,
datasize, files and stacksize), mark them as ancient and remove the code
that sets the values from config.
I.e. print the name of the function in BIND that called the system
function that returned an error. Since it was useful for pthreads
code, it seems worthwhile doing so everywhere.
Mostly generated automatically with the following semantic patch,
except where coccinelle was confused by #ifdef in lib/isc/net.c
@@ expression list args; @@
- UNEXPECTED_ERROR(__FILE__, __LINE__, args)
+ UNEXPECTED_ERROR(args)
@@ expression list args; @@
- FATAL_ERROR(__FILE__, __LINE__, args)
+ FATAL_ERROR(args)
There's a known memory leak in the engine_pkcs11 at the time of writing
this and it interferes with the named ability to check for memory leaks
in the OpenSSL memory context by default.
Add an autoconf option to explicitly enable the memory leak detection,
and use it in the CI except for pkcs11 enabled builds. When this gets
fixed in the engine_pkc11, the option can be enabled by default.
As we can't check the deallocations done in the library memory contexts
by default because it would always fail on non-clean exit (that happens
on error or by calling exit() early), we just want to enable the checks
to be done on normal exit.
The libxml2 library provides a way to replace the default allocator with
user supplied allocator (malloc, realloc, strdup and free).
Create a memory context specifically for libxml2 to allow tracking the
memory usage that has originated from within libxml2. This will provide
a separate memory context for libxml2 to track the allocations and when
shutting down the application it will check that all libxml2 allocations
were returned to the allocator.
Additionally, move the xmlInitParser() and xmlCleanupParser() calls from
bin/named/main.c to library constructor/destructor in libisc library.
The usage of xmlInitThreads() and xmlCleanupThreads() functions in
libxml2 is now marked as deprecated, and these functions will be made
private in the future.
Use xmlInitParser() and xmlCleanupParser() instead of them.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
* isc_timer was rewritten using the uv_timer, and isc_timermgr_t was
completely removed; isc_timer objects are now directly created on the
isc_loop event loops.
* the isc_timer API has been simplified. the "inactive" timer type has
been removed; timers are now stopped by calling isc_timer_stop()
instead of resetting to inactive.
* isc_manager now creates a loop manager rather than a timer manager.
* modules and applications using isc_timer have been updated to use the
new API.
The isc_task_onshutdown() was used to post event that should be run when
the task is being shutdown. This could happen explicitly in the
isc_test_shutdown() call or implicitly when we detach the last reference
to the task and there are no more events posted on the task.
This whole task onshutdown mechanism just makes things more complicated,
and it's easier to post the "shutdown" events when we are shutting down
explicitly and the existing code already always knows when it should
shutdown the task that's being used to execute the onshutdown events.
Replace the isc_task_onshutdown() calls with explicit calls to execute
the shutdown tasks.
As we are going to use libuv outside of the netmgr, we need the shims to
be readily available for the rest of the codebase.
Move the "netmgr/uv-compat.h" to <isc/uv.h> and netmgr/uv-compat.c to
uv.c, and as a rule of thumb, the users of libuv should include
<isc/uv.h> instead of <uv.h> directly.
Additionally, merge netmgr/uverr2result.c into uv.c and rename the
single function from isc__nm_uverr2result() to isc_uverr2result().
It might be useful to display built-in configuration with all its
values. It should make it easier to test what default values has changed
in a new release.
Related: #1326
C11 has builtin support for _Noreturn function specifier with
convenience noreturn macro defined in <stdnoreturn.h> header.
Replace ISC_NORETURN macro by C11 noreturn with fallback to
__attribute__((noreturn)) if the C11 support is not complete.
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
Gcc 7+ and Clang 10+ have implemented __attribute__((fallthrough)) which
is explicit version of the /* FALLTHROUGH */ comment we are currently
using.
Add and apply FALLTHROUGH macro that uses the attribute if available,
but does nothing on older compilers.
In one case (lib/dns/zone.c), using the macro revealed that we were
using the /* FALLTHROUGH */ comment in wrong place, remove that comment.
The current implementation of isc_queue uses Michael-Scott lock-free
queue that in turn uses hazard pointers. It was discovered that the way
we use the isc_queue, such complicated mechanism isn't really needed,
because most of the time, we either execute the work directly when on
nmthread (in case of UDP) or schedule the work from the matching
nmthreads.
Replace the current implementation of the isc_queue with a simple locked
ISC_LIST. There's a slight improvement - since copying the whole list
is very lightweight - we move the queue into a new list before we start
the processing and locking just for moving the queue and not for every
single item on the list.
NOTE: There's a room for future improvements - since we don't guarantee
the order in which the netievents are processed, we could have two lists
- one unlocked that would be used when scheduling the work from the
matching thread and one locked that would be used from non-matching
thread.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
Mutex profiling code (used when the ISC_MUTEX_PROFILE preprocessor macro
is set to 1) has been broken for the past 3 years (since commit
0bed9bfc28) and nobody complained, which
is a strong indication that this code is not being used these days any
more. External tools for both measuring performance and detecting
locking issues are already wired into various GitLab CI checks. Drop
all code depending on the ISC_MUTEX_PROFILE preprocessor macro being
set.
Remove the dynamic registration of result codes. Convert isc_result_t
from unsigned + #defines into 32-bit enum type in grand unified
<isc/result.h> header. Keep the existing values of the result codes
even at the expense of the description and identifier tables being
unnecessary large.
Additionally, add couple of:
switch (result) {
[...]
default:
break;
}
statements where compiler now complains about missing enum values in the
switch statement.
The native PKCS#11 support has been removed in favour of better
maintained, more performance and easier to use OpenSSL PKCS#11 engine
from the OpenSC project.
The ISC_MEM_DEBUGSIZE and ISC_MEM_DEBUGCTX did sanity checks on matching
size and memory context on the memory returned to the allocator. Those
will no longer needed when most of the allocator will be replaced with
jemalloc.
This commit adds two new autoconf options `--enable-doh` (enabled by
default) and `--with-libnghttp2` (mandatory when DoH is enabled).
When DoH support is disabled the library is not linked-in and support
for http(s) protocol is disabled in the netmgr, named and dig.
The isc/platform.h header was left empty which things either already
moved to config.h or to appropriate headers. This is just the final
cleanup commit.
Previously, we would set the locale on a global level and that could
possibly lead to different behaviour in underlying functions. In this
commit, we change to code to use the system locale only when calling the
libidn2 functions and reset the locale back to "POSIX" when exiting the
libidn2 code.
The Windows support has been completely removed from the source tree
and BIND 9 now no longer supports native compilation on Windows.
We might consider reviewing mingw-w64 port if contributed by external
party, but no development efforts will be put into making BIND 9 compile
and run on Windows again.
Previously, netmgr, taskmgr, timermgr and socketmgr all had their own
isc_<*>mgr_create() and isc_<*>mgr_destroy() functions. The new
isc_managers_create() and isc_managers_destroy() fold all four into a
single function and makes sure the objects are created and destroy in
correct order.
Especially now, when taskmgr runs on top of netmgr, the correct order is
important and when the code was duplicated at many places it's easy to
make mistake.
The former isc_<*>mgr_create() and isc_<*>mgr_destroy() functions were
made private and a single call to isc_managers_create() and
isc_managers_destroy() is required at the program startup / shutdown.
