When an HTTP/2 client terminates a session it means that it is about
to close the underlying connection. However, we were not doing that.
As a result, with the latest changes to the test suite, which made it
to limit amount of requests per a transport connection, the tests
using quota would hang for quite a while. This commit fixes that.
The function should not be called here because it is, in general,
supposed to be called at the end of the transport level callbacks to
perform I/O, and thus, calling it here is clearly a mistake because it
breaks other code expectations. As a result of the call to
http_do_bio() from within isc__nm_http_request() the unit tests were
running slower than expected in some situations.
In this particular situation http_do_bio() is going to be called at
the end of the transport_connect_cb() (initially), or http_readcb(),
sending all of the scheduled requests at once.
This change affects only the test suite because it is the only place
in the codebase where isc__nm_http_request() is used in order to
ensure that the server is able to handle multiple HTTP/2 streams at
once.
This commit fixes a crash in DoH caused by transport handle to be
detached too early when sending outgoing data.
We need to attach to the session->handle earlier because as an
indirect result of the nghttp2_session_mem_send() the session might
get closed and the handle detached. However, there is still might be
some outgoing data to handle. Besides, even when the underlying socket
was closed via the handle, we still should try to attempt to send
outgoing data via isc_nm_send() to let it call write callback, passed
to the http_send_outgoing().
This commit gets rid of custom code taking care of response buffering
by replacing the custom code with isc_buffer_t. Also, it gets rid of
an unnecessary memory copying when sending a response.
This commit replaces the ad-hoc 64K buffer for incoming POST data with
isc_buffer_t backed by dynamically allocated buffer sized accordingly
to the value in the "Content-Length" header.
The commit replaces an ad-hoc incoming DNS-message buffer in the
client-side DoH code with isc_buffer_t.
The commit also fixes a timing issue in the unit tests revealed by the
change.
This commit replaces a static ad-hoc HTTP/2 session's temporary buffer
with a realloc-able isc_buffer_t object, which is being allocated on
as needed basis, lowering the memory consumption somewhat. The buffer
is needed in very rare cases, so allocating it prematurely is not
wise.
Also, it fixes a bug in http_readcb() where the ad-hoc buffer appeared
to be improperly used, leading to a situation when the processed data
from the receiving regions can be processed twice, while unprocessed
data will never be processed.
This commit gets rid of RW locks in a hot path of the DoH code. In the
original design, it was implied that we add new endpoints after the
HTTP listener was created. Such a design implies some locking. We do
not need such flexibility, though. Instead, we could build a set of
endpoints before the HTTP listener gets created. Such a design does
not need RW locks at all.
This commit makes number of concurrent HTTP/2 streams per connection
configurable as a mean to fight DDoS attacks. As soon as the limit is
reached, BIND terminates the whole session.
The commit adds a global configuration
option (http-streams-per-connection) which can be overridden in an
http <name> {...} statement like follows:
http local-http-server {
...
streams-per-connection 100;
...
};
For now the default value is 100, which should be enough (e.g. NGINX
uses 128, but it is a full-featured WEB-server). When using lower
numbers (e.g. ~70), it is possible to hit the limit with
e.g. flamethrower.
This commit adds the code (and some tests) which allows verifying
validity of HTTP paths both in incoming HTTP requests and in BIND's
configuration file.
An unhandled code path left GET query string data uninitialised (equal
to NULL) and led to a crash during the requests' base64 data
decoding. This commit fixes that.
It was discovered that setting the thread affinity on both the netmgr
and netthread threads lead to inconsistent recursive performance because
sometimes the netmgr and netthread threads would compete over single
resource and sometimes not.
Removing setting the affinity causes a slight dip in the authoritative
performance around 5% (the measured range was from 3.8% to 7.8%), but
the recursive performance is now consistently good.
In the jemalloc merge request, we missed the fact that ah_frees and ah_handles
are reallocated which is not compatible with using isc_mem_get() for allocation
and isc_mem_put() for deallocation. This commit reverts that part and restores
use of isc_mem_allocate() and isc_mem_free().
Current mempools are kind of hybrid structures - they serve two
purposes:
1. mempool with a lock is basically static sized allocator with
pre-allocated free items
2. mempool without a lock is a doubly-linked list of preallocated items
The first kind of usage could be easily replaced with jemalloc small
sized arena objects and thread-local caches.
The second usage not-so-much and we need to keep this (in
libdns:message.c) for performance reasons.
The isc_mem_allocate() comes with additional cost because of the memory
tracking. In this commit, we replace the usage with isc_mem_get()
because we track the allocated sizes anyway, so it's possible to also
replace isc_mem_free() with isc_mem_put().
This commit makes BIND return HTTP status codes for malformed or too
small requests.
DNS request processing code would ignore such requests. Such an
approach works well for other DNS transport but does not make much
sense for HTTP, not allowing it to complete the request/response
sequence.
Suppose execution has reached the point where DNS message handling
code has been called. In that case, it means that the HTTP request has
been successfully processed, and, thus, we are expected to respond to
it either with a message containing some DNS payload or at least to
return an error status code. This commit ensures that BIND behaves
this way.
This error code fits better than the more generic "Internal Server
Error" (500) which implies that the problem is on the server.
Also, do not end the whole HTTP/2 session on a bad request.
We were too strict regarding the value and presence of "Accept" HTTP
header, slightly breaking compatibility with the specification.
According to RFC8484 client SHOULD add "Accept" header to the requests
but MUST be able to handle "application/dns-message" media type
regardless of the value of the header. That basically suggests we
ignore its value.
Besides, verifying the value of the "Accept" header is a bit tricky
because it could contain multiple media types, thus requiring proper
parsing. That is doable but does not provide us with any benefits.
Among other things, not verifying the value also fixes compatibility
with clients, which could advertise multiple media types as supported,
which we should accept. For example, it is possible for a perfectly
valid request to contain "application/dns-message", "application/*",
and "*/*" in the "Accept" header value. Still, we would treat such a
request as invalid.
The commit fixes BIND hanging when browsers end HTTP/2 streams
prematurely (for example, by sending RST_STREAM). It ensures that
isc__nmsocket_prep_destroy() will be called for an HTTP/2 stream,
allowing it to be properly disposed.
The problem was impossible to reproduce using dig or DoH benchmarking
software (e.g. flamethrower) because these do not tend to end HTTP/2
streams prematurely.
This commit adds two new autoconf options `--enable-doh` (enabled by
default) and `--with-libnghttp2` (mandatory when DoH is enabled).
When DoH support is disabled the library is not linked-in and support
for http(s) protocol is disabled in the netmgr, named and dig.
In DNS Flag Day 2020, we started setting the DF (Don't Fragment socket
option on the UDP sockets. It turned out, that this code was incomplete
leading to dropping the outgoing UDP packets.
This has been now remedied, so it is possible to disable the
fragmentation on the UDP sockets again as the sending error is now
handled by sending back an empty response with TC (truncated) bit set.
This reverts commit 66eefac78c92b64b6689a1655cc677a2b1d13496.
When the fragmentation is disabled on UDP sockets, the uv_udp_send()
call can fail with UV_EMSGSIZE for messages larger than path MTU.
Previously, this error would end with just discarding the response. In
this commit, a proper handling of such case is added and on such error,
a new DNS response with truncated bit set is generated and sent to the
client.
This change allows us to disable the fragmentation on the UDP
sockets again.
Previously, each protocol (TCPDNS, TLSDNS) has specified own function to
disable pipelining on the connection. An oversight would lead to
assertion failure when opcode is not query over non-TCPDNS protocol
because the isc_nm_tcpdns_sequential() function would be called over
non-TCPDNS socket. This commit removes the per-protocol functions and
refactors the code to have and use common isc_nm_sequential() function
that would either disable the pipelining on the socket or would handle
the request in per specific manner. Currently it ignores the call for
HTTP sockets and causes assertion failure for protocols where it doesn't
make sense to call the function at all.
The warning was produced by an ASAN build:
runtime error: null pointer passed as argument 2, which is declared to
never be null
This commit fixes it by checking if nghttp2_session_mem_send() has
actually returned anything.
This change sets the mentioned fields properly and gets rid of klusges
added in the times when we were keeping pointers to isc_sockaddr_t
instead of copies. Among other things it helps to avoid a situation
when garbage instead of an address appears in dig output.
We cannot use DoH for zone transfers. According to RFC8484 a DoH
request contains exactly one DNS message (see Section 6: Definition of
the "application/dns-message" Media Type,
https://datatracker.ietf.org/doc/html/rfc8484#section-6). This makes
DoH unsuitable for zone transfers as often (and usually!) these need
more than one DNS message, especially for larger zones.
As zone transfers over DoH are not (yet) standardised, nor discussed
in RFC8484, the best thing we can do is to return "not implemented."
Technically DoH can be used to transfer small zones which fit in one
message, but that is not enough for the generic case.
Also, this commit makes the server-side DoH code ensure that no
multiple responses could be attempted to be sent over one HTTP/2
stream. In HTTP/2 one stream is mapped to one request/response
transaction. Now the write callback will be called with failure error
code in such a case.
Support a situation in header processing callback when client side
code could receive a belated response or part of it. That could
happen when the HTTP/2 session was already closed, but there were some
response data from server in flight. Other client-side nghttp2
callbacks code already handled this case.
The bug became apparent after HTTP/2 write buffering was supported,
leading to rare unit test failures.
This commit ensures that sock->h2.connect.cstream gets nullified when
the object in question is deleted. This fixes a nasty crash in dig
exposed when receiving large responses leading to double free()ing.
Also, it refactors how the client-side code keeps track of client
streams (hopefully) preventing from similar errors appearing in the
future.
This commit makes NM code to report HTTP as a stream protocol. This
makes it possible to handle large responses properly. Like:
dig +https @127.0.0.1 A cmts1-dhcp.longlines.com
The Windows support has been completely removed from the source tree
and BIND 9 now no longer supports native compilation on Windows.
We might consider reviewing mingw-w64 port if contributed by external
party, but no development efforts will be put into making BIND 9 compile
and run on Windows again.
While cleaning up the usage of HAVE_UV_<func> macros, we forgot to
cleanup the HAVE_UV_UDP_CONNECT in the actual code and
HAVE_UV_TRANSLATE_SYS_ERROR and this was causing Windows build to fail
on uv_udp_send() because the socket was already connected and we were
falsely assuming that it was not.
The platforms with autoconf support were not affected, because we were
still checking for the functions from the configure.
This commit adds the ability to consolidate HTTP/2 write requests if
there is already one in flight. If it is the case, the code will
consolidate multiple subsequent write request into a larger one
allowing to utilise the network in a more efficient way by creating
larger TCP packets as well as by reducing TLS records overhead (by
creating large TLS records instead of multiple small ones).
This optimisation is especially efficient for clients, creating many
concurrent HTTP/2 streams over a transport connection at once. This
way, the code might create a small amount of multi-kilobyte requests
instead of many 50-120 byte ones.
In fact, it turned out to work so well that I had to add a work-around
to the code to ensure compatibility with the flamethrower, which, at
the time of writing, does not support TLS records larger than two
kilobytes. Now the code tries to flush the write buffer after 1.5
kilobyte, which is still pretty adequate for our use case.
Essentially, this commit implements a recommendation given by nghttp2
library:
https://nghttp2.org/documentation/nghttp2_session_mem_send.html
The libuv has a support for running long running tasks in the dedicated
threadpools, so it doesn't affect networking IO.
This commit adds isc_nm_work_enqueue() wrapper that would wraps around
the libuv API and runs it on top of associated worker loop.
The only limitation is that the function must be called from inside
network manager thread, so the call to the function should be wrapped
inside a (bound) task.
Instead of having a configure check for every missing function that has
been added in later version of libuv, we now use UV_VERSION_HEX to
decide whether we need the shim or not.
The uv_req_get_data() and uv_req_set_data() functions were introduced in
libuv >= 1.19.0, so we need to add compatibility shims with older libuv
versions.
configuring with --enable-mutex-atomics flagged these incorrectly
initialised variables on systems where pthread_mutex_init doesn't
just zero out the structure.
The isc_nmiface_t type was holding just a single isc_sockaddr_t,
so we got rid of the datatype and use plain isc_sockaddr_t in place
where isc_nmiface_t was used before. This means less type-casting and
shorter path to access isc_sockaddr_t members.
At the same time, instead of keeping the reference to the isc_sockaddr_t
that was passed to us when we start listening, we will keep a local
copy. This prevents the data race on destruction of the ns_interface_t
objects where pending nmsockets could reference the sockaddr of already
destroyed ns_interface_t object.
Previously, as a way of reducing the contention between threads a
clientmgr object would be created for each interface/IP address.
We tasks being more strictly bound to netmgr workers, this is no longer
needed and we can just create clientmgr object per worker queue (ncpus).
Each clientmgr object than would have a single task and single memory
context.
Instead of using fixed quantum, this commit adds atomic counter for
number of items on each queue and uses the number of netievents
scheduled to run as the limit of maximum number of netievents for a
single process_queue() run.
This prevents the endless loops when the netievent would schedule more
netievents onto the same loop, but we don't have to pick "magic" number
for the quantum.
This commit adds a new configuration option to set the receive and send
buffer sizes on the TCP and UDP netmgr sockets. The default is `0`
which doesn't set any value and just uses the value set by the operating
system.
There's no magic value here - set it too small and the performance will
drop, set it too large, the buffers can fill-up with queries that have
already timeouted on the client side and nobody is interested for the
answer and this would just make the server clog up even more by making
it produce useless work.
The `netstat -su` can be used on POSIX systems to monitor the receive
and send buffer errors.
The outgoing UDP socket selection would pick unintialized children
socket on Windows, because we have more netmgr workers than we have
listening sockets. This commit fixes the selection by keeping the
outgoing socket the same, so it's always run on existing socket.
