This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
the resolver test checks that the correct number of fetches have
been sent NS rrsets of a given size, but it formerly did so by
counting queries received by the authoritative server, which could
result in an off-by-one count if one of the queries had been resent
due to a timeout or a port number collision.
this commit changes the test to count fetches initiated by the
resolver, which should prevent the intermittent test failure, and
is the actual datum we were interested in anyway.
Add a lame delegation to lame.example.org with only an A record
in the additional section; on failure, this will trigger a retry
with AAAA, which will loop. Test that dig returns SERVFAIL, in
addition to confirming that named doesn't hang on shutdown.
The additional processing method has been expanded to take the
owner name of the record, as HTTPS and SVBC need it to process "."
in service form.
The additional section callback can now return the RRset that was
added. We use this when adding CNAMEs. Previously, the recursion
would stop if it detected that a record you added already exists. With
CNAMEs this rule doesn't work, as you ultimately care about the RRset
at the target of the CNAME and not the presence of the CNAME itself.
Returning the record allows the caller to restart with the target
name. As CNAMEs can form loops, loop protection was added.
As HTTPS and SVBC can produce infinite chains, we prevent this by
tracking recursion depth and stopping if we go too deep.
The ISC_MEM_DEBUGSIZE and ISC_MEM_DEBUGCTX did sanity checks on matching
size and memory context on the memory returned to the allocator. Those
will no longer needed when most of the allocator will be replaced with
jemalloc.
one of the tests in the resolver system test depends on dig
getting no response to its first two query attempts, and SERVFAIL
on the third after resolution times out.
using a 5-second retry timer in dig means the SERVFAIL response
could occur while dig is discarding the second query and preparing
to send the third. in this case the server's response could be
missed. shortening the retry interval to 4 seconds ensures that
dig has already sent the third query when the SERVFAIL response
arrives.
also, the serve-stale system test could fail due to a race in which
it timed out after waiting ten seconds for a file to be written, and
the dig timeout was just a bit longer. this is addressed by extending
the dig timeout to 11 seconds for this test.
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.
$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
Add a system test that counts how many address fetches are made
for different numbers of NS records and checks that the number
are successfully limited.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
Added test to ensure that NXDOMAIN is returned when BIND is queried for a
non existing domain in CH class (if a view of CHAOS class is configured)
and that it also doesn't crash anymore in those cases.
These two tests were failing basically because in order for prefetching to
happen, the TTL for a given DNS record must be greater than or equal to
the prefetch config value + 9.
The previous TTL for both records was 10, while prefetch value in
configuration was 3, thus making only records with TTL >= 12 elligible
for prefetching.
TTL value for both records was adjusted to the value 13, and prefetch
value was set to 4 (inc by 1), so records with TTL (4 + 9) >= 13 are
elligible for prefetching.
Adjusting prefetch value to 4 gives the test 1 second more to avoid time
problems when sharing resources on a heavy loaded PC.
Also prefetch value in settings is now read by the script and used
by it to corrrectly calculate the amount of time needed to delay before
sending a request to trigger prefetch, adding a bit of flexibility to
fine tune the test in the future.
The previous test had two problems:
1. It wasn't written specifically for testing what it was supposed to:
prefetch disabled.
2. It could fail in some circunstances if the computer's load is too
high, due to sleeps not taking parallel tests and cpu load into account.
The new test is testing prefetch disabled as follows:
1. It asks for a txt record for a given domain and takes note of the
record's TTL (which is 10).
2. It sleeps for (TTL - 5) = 5 seconds, having a window of 5 seconds to
issue new queries before the record expires from cache.
3. Three(3) queries are executed in a row, with a interval of 1 second
between them, and for each query we verify that the TTL in response is
less than the previous one, thus ensuring that prefetch is disabled (if
it were enabled this record would have been refreshed already and TTL
would be >= the first TTL).
Having a window of 5 seconds to perform 3 queries with a interval of 1
second between them gives the test a reasonable amount of time
to not suffer from a machine with heavy load.
Some system tests assume dig's default setings are in effect. While
these defaults may only be silently overridden (because of specific
options set in /etc/resolv.conf) for BIND releases using liblwres for
parsing /etc/resolv.conf (i.e. BIND 9.11 and older), it is arguably
prudent to make sure that tests relying on specific +timeout and +tries
settings specify these explicitly in their dig invocations, in order to
prevent test failures from being triggered by any potential changes to
current defaults.
If dots are not escaped in the "1.2.3.4" regular expressions used for
checking whether IP address 1.2.3.4 is present in the tested resolver's
answers, a COOKIE that matches such a regular expression will trigger a
false positive for the "resolver" system test. Properly escape dots in
the aforementioned regular expressions to prevent that from happening.
Commit ba912435427cf884fdc1ca26743eba6c00439106 causes the resolver to
respond to a client query with FORMERR when all upstream queries sent to
the servers authoritative for QNAME elicit FORMERR responses. This
happens because resolver code returns DNS_R_FORMERR in such a case and
dns_result_torcode() acts as a pass-through for all arguments which are
already a valid RCODE.
The correct RCODE to set in the response returned to the client in the
case described above is SERVFAIL. Make sure this happens by overriding
the RCODE in query_gotanswer(), on the grounds that any format errors in
the client query itself should be caught long before execution reaches
that point. This change should not reduce query error logging accuracy
as the resolver code itself reports the exact reason for returning a
DNS_R_FORMERR result using log_formerr().
As part of resquery_response() refactoring [1], a goto statement was
replaced [2] with a call to a new function - originally called
rctx_delegation(), now folded into rctx_answer_none() - extracted from
existing code. However, one call site of that refactored function does
not reset the "result" variable, causing a referral with a non-empty
ANSWER section to be inadvertently treated as an error, which prevents
resolution of names reliant on servers sending such responses. Fix by
resetting the "result" variable to ISC_R_SUCCESS when a response
containing a non-empty ANSWER section can be treated as a delegation.
[1] see RT #45362
[2] see commit e1380a16741a3b4a57e54d7a9ce09dd12691522f
- add CHANGES note
- update copyrights and license headers
- add -j to the make commands in .gitlab-ci.yml to take
advantage of parallelization in the gitlab CI process
3938. [func] Added quotas to be used in recursive resolvers
that are under high query load for names in zones
whose authoritative servers are nonresponsive or
are experiencing a denial of service attack.
- "fetches-per-server" limits the number of
simultaneous queries that can be sent to any
single authoritative server. The configured
value is a starting point; it is automatically
adjusted downward if the server is partially or
completely non-responsive. The algorithm used to
adjust the quota can be configured via the
"fetch-quota-params" option.
- "fetches-per-zone" limits the number of
simultaneous queries that can be sent for names
within a single domain. (Note: Unlike
"fetches-per-server", this value is not
self-tuning.)
- New stats counters have been added to count
queries spilled due to these quotas.
See the ARM for details of these options. [RT #37125]
response when there is a malformed EDNS option.
[RT #39647]
4153. [bug] Dig should zero non significant +subnet bits. Check
that non significant ECS bits are zero on receipt.
[RT #39647]
experimental SIT option of BIND 9.10. The following
named.conf directives are avaliable: send-cookie,
cookie-secret, cookie-algorithm and nocookie-udp-size.
The following dig options are available:
+[no]cookie[=value] and +[no]badcookie. [RT #39928]
