Configure "none" as a builtin policy. Change the 'cfg_kasp_fromconfig'
api so that the 'name' will determine what policy needs to be
configured.
When transitioning a zone from secure to insecure, there will be
cases when a zone with no DNSSEC policy (dnssec-policy none) should
be using KASP. When there are key state files available, this is an
indication that the zone once was DNSSEC signed but is reconfigured
to become insecure.
If we would not run the keymgr, named would abruptly remove the
DNSSEC records from the zone, making the zone bogus. Therefore,
change the code such that a zone will use kasp if there is a valid
dnssec-policy configured, or if there are state files available.
RFC 8767 recommends that attempts to refresh to be done no more
frequently than every 30 seconds.
Added check into named-checkconf, which will warn if values below the
default are found in configuration.
BIND will also log the warning during loading of configuration in the
same fashion.
it is now an error to have two primaries lists with the same
name. this is true regardless of whether the "primaries" or
"masters" keywords were used to define them.
as "type primary" is preferred over "type master" now, it makes
sense to make "primaries" available as a synonym too.
added a correctness check to ensure "primaries" and "masters"
cannot both be used in the same zone.
these keywords were added to the parser as synonyms for "master"
and "slave" but were never hooked in to the configuration of named,
so they were ignored. this has been fixed and the option is now
checked for correctness.
The rewrite of BIND 9 build system is a large work and cannot be reasonable
split into separate merge requests. Addition of the automake has a positive
effect on the readability and maintainability of the build system as it is more
declarative, it allows conditional and we are able to drop all of the custom
make code that BIND 9 developed over the years to overcome the deficiencies of
autoconf + custom Makefile.in files.
This squashed commit contains following changes:
- conversion (or rather fresh rewrite) of all Makefile.in files to Makefile.am
by using automake
- the libtool is now properly integrated with automake (the way we used it
was rather hackish as the only official way how to use libtool is via
automake
- the dynamic module loading was rewritten from a custom patchwork to libtool's
libltdl (which includes the patchwork to support module loading on different
systems internally)
- conversion of the unit test executor from kyua to automake parallel driver
- conversion of the system test executor from custom make/shell to automake
parallel driver
- The GSSAPI has been refactored, the custom SPNEGO on the basis that
all major KRB5/GSSAPI (mit-krb5, heimdal and Windows) implementations
support SPNEGO mechanism.
- The various defunct tests from bin/tests have been removed:
bin/tests/optional and bin/tests/pkcs11
- The text files generated from the MD files have been removed, the
MarkDown has been designed to be readable by both humans and computers
- The xsl header is now generated by a simple sed command instead of
perl helper
- The <irs/platform.h> header has been removed
- cleanups of configure.ac script to make it more simpler, addition of multiple
macros (there's still work to be done though)
- the tarball can now be prepared with `make dist`
- the system tests are partially able to run in oot build
Here's a list of unfinished work that needs to be completed in subsequent merge
requests:
- `make distcheck` doesn't yet work (because of system tests oot run is not yet
finished)
- documentation is not yet built, there's a different merge request with docbook
to sphinx-build rst conversion that needs to be rebased and adapted on top of
the automake
- msvc build is non functional yet and we need to decide whether we will just
cross-compile bind9 using mingw-w64 or fix the msvc build
- contributed dlz modules are not included neither in the autoconf nor automake
When dnssec-policy was introduced, it implicitly set inline-signing.
But DNSSEC maintenance required either inline-signing to be enabled,
or a dynamic zone. In other words, not in all cases you want to
DNSSEC maintain your zone with inline-signing.
Change the behavior and determine whether inline-signing is
required: if the zone is dynamic, don't use inline-signing,
otherwise implicitly set it.
You can also explicitly set inline-signing to yes with dnssec-policy,
the restriction that both inline-signing and dnssec-policy cannot
be set at the same time is now lifted.
However, 'inline-signing no;' on a non-dynamic zone with a
dnssec-policy is not possible.
Both clang-tidy and uncrustify chokes on statement like this:
for (...)
if (...)
break;
This commit uses a very simple semantic patch (below) to add braces around such
statements.
Semantic patch used:
@@
statement S;
expression E;
@@
while (...)
- if (E) S
+ { if (E) { S } }
@@
statement S;
expression E;
@@
for (...;...;...)
- if (E) S
+ { if (E) { S } }
@@
statement S;
expression E;
@@
if (...)
- if (E) S
+ { if (E) { S } }
This commit makes some minor changes to the trust anchor code:
1. Replace the undescriptive n1, n2 and n3 identifiers with slightly
better rdata1, rdata2, and rdata3.
2. Fix an occurrence where in the error log message a static number
32 was printed, rather than the rdata3 length.
3. Add a default case to the switch statement checking DS digest
algorithms to catch unknown algorithms.
'dnssec-policy' can now also be set on the options and view level and
a zone that does not set 'dnssec-policy' explicitly will inherit it
from the view or options level.
This requires a new keyword to be introduced: 'none'. If set to
'none' the zone will not be DNSSEC maintained, in other words it will
stay unsigned. You can use this to break the inheritance. Of course
you can also break the inheritance by referring to a different
policy.
The keywords 'default' and 'none' are not allowed when configuring
your own dnssec-policy statement.
Add appropriate tests for checking the configuration (checkconf)
and add tests to the kasp system test to verify the inheritance
works.
Edit the kasp system test such that it can deal with unsigned zones
and views (so setting a TSIG on the query).
This commit introduces the initial `dnssec-policy` configuration
statement. It has an initial set of options to deal with signature
and key maintenance.
Add some checks to ensure that dnssec-policy is configured at the
right locations, and that policies referenced to in zone statements
actually exist.
Add some checks that when a user adds the new `dnssec-policy`
configuration, it will no longer contain existing DNSSEC
configuration options. Specifically: `inline-signing`,
`auto-dnssec`, `dnssec-dnskey-kskonly`, `dnssec-secure-to-insecure`,
`update-check-ksk`, `dnssec-update-mode`, `dnskey-sig-validity`,
and `sig-validity-interval`.
Test a good kasp configuration, and some bad configurations.
The ttlval configuration types are replaced by duration configuration
types. The duration is an ISO 8601 duration that is going to be used
for DNSSEC key timings such as key lifetimes, signature resign
intervals and refresh periods, etc. But it is also still allowed to
use the BIND ttlval ways of configuring intervals (number plus
optional unit).
A duration is stored as an array of 7 different time parts.
A duration can either be expressed in weeks, or in a combination of
the other datetime indicators.
Add several unit tests to ensure the correct value is parsed given
different string values.
This commit changes the BIND cookie algorithms to match
draft-sury-toorop-dnsop-server-cookies-00. Namely, it changes the Client Cookie
algorithm to use SipHash 2-4, adds the new Server Cookie algorithm using SipHash
2-4, and changes the default for the Server Cookie algorithm to be siphash24.
Add siphash24 cookie algorithm, and make it keep legacy aes as
- managed-keys is now deprecated as well as trusted-keys, though
it continues to work as a synonym for dnssec-keys
- references to managed-keys have been updated throughout the code.
- tests have been updated to use dnssec-keys format
- also the trusted-keys entries have been removed from the generated
bind.keys.h file and are no longer generated by bindkeys.pl.
- any use of trusted or static keys for the root zone will now
elicit a warning, regardless of what the keys may be
- ditto for any use of a key for dlv.isc.org, static or managed
- trusted-keys is now flagged as deprecated, but still works
- managed-keys can be used to configure permanent trust anchors by
using the "static-key" keyword in place of "initial-key"
- parser now uses an enum for static-key and initial-key keywords
Since 2008, the cleaning-interval timer has been documented as
"effectively obsolete" and disabled in the default configuration with
a comment saying "now meaningless".
This change deletes all the code that implements the cleaning-interval
timer, except for the config parser in whcih it is now explicitly
marked as obsolete.
I have verified (using the deletelru and deletettl cache stats) that
named still cleans the cache after this change.
