When introducing change 5149, "rndc dumpdb" started to print a line
above a stale RRset, indicating how long the data will be retained.
At that time, I thought it should also be possible to load
a cache from file. But if a TTL has a value of 0 (because it is stale),
stale entries wouldn't be loaded from file. So, I added the
'max-stale-ttl' to TTL values, and adjusted the $DATE accordingly.
Since we actually don't have a "load cache from file" feature, this
is premature and is causing confusion at operators. This commit
changes the 'max-stale-ttl' adjustments.
A check in the serve-stale system test is added for a non-stale
RRset (longttl.example) to make sure the TTL in cache is sensible.
Also, the comment above stale RRsets could have nonsensical
values. A possible reason why this may happen is when the RRset was
marked a stale but the 'max-stale-ttl' has passed (and is actually an
RRset awaiting cleanup). This would lead to the "will be retained"
value to be negative (but since it is stored in an uint32_t, you would
get a nonsensical value (e.g. 4294362497).
To mitigate against this, we now also check if the header is not
ancient. In addition we check if the stale_ttl would be negative, and
if so we set it to 0. Most likely this will not happen because the
header would already have been marked ancient, but there is a possible
race condition where the 'rdh_ttl + serve_stale_ttl' has passed,
but the header has not been checked for staleness.
Even if a call to gss_accept_sec_context() fails, it might still cause a
GSS-API response token to be allocated and left for the caller to
release. Make sure the token is released before an early return from
dst_gssapi_acceptctx().
Previously, dns_journal_begin_transaction() could reserve the wrong
amount of space. We now check that the transaction is internally
consistent when upgrading / downgrading a journal and we also handle the
bad transaction headers.
Instead of journal_write(), use correct format call journal_write_xhdr()
to write the dummy transaction header which looks at j->header_ver1 to
determine which transaction header to write instead of always writing a
zero filled journal_rawxhdr_t header.
The isc_nm_*connect() functions were refactored to always return the
connection status via the connect callback instead of sometimes returning
the hard failure directly (for example, when the socket could not be
created, or when the network manager was shutting down).
This commit changes the connect functions in all the network manager
modules, and also makes the necessary refactoring changes in places
where the connect functions are called.
Fix race between zone_maintenance and dns_zone_notifyreceive functions,
zone_maintenance was attempting to read a zone flag calling
DNS_ZONE_FLAG(zone, flag) while dns_zone_notifyreceive was updating
a flag in the same zone calling DNS_ZONE_SETFLAG(zone, ...).
The code reading the flag in zone_maintenance was not protected by the
zone's lock, to avoid a race the zone's lock is now being acquired
before an attempt to read the zone flag is made.
The dboption DNS_DBFIND_STALEONLY caused confusion because it implies
we are looking for stale data **only** and ignore any active RRsets in
the cache. Rename it to DNS_DBFIND_STALETIMEOUT as it is more clear
the option is related to a lookup due to "stale-answer-client-timeout".
Rename other usages of "staleonly", instead use "lookup due to...".
Also rename related function and variable names.
When implementing "stale-answer-client-timeout", we decided that
we should only return positive answers prematurely to clients. A
negative response is not useful, and in that case it is better to
wait for the recursion to complete.
To do so, we check the result and if it is not ISC_R_SUCCESS, we
decide that it is not good enough. However, there are more return
codes that could lead to a positive answer (e.g. CNAME chains).
This commit removes the exception and now uses the same logic that
other stale lookups use to determine if we found a useful stale
answer (stale_found == true).
This means we can simplify two test cases in the serve-stale system
test: nodata.example is no longer treated differently than data.example.
The NS_QUERYATTR_ANSWERED attribute is to prevent sending a response
twice. Without the attribute, this may happen if a staleonly lookup
found a useful answer and sends a response to the client, and later
recursion ends and also tries to send a response.
The attribute was also used to mask adding a duplicate RRset. This is
considered harmful. When we created a response to the client with a
stale only lookup (regardless if we actually have send the response),
we should clear the rdatasets that were added during that lookup.
Mark such rdatasets with the a new attribute,
DNS_RDATASETATTR_STALE_ADDED. Set a query attribute
NS_QUERYATTR_STALEOK if we may have added rdatasets during a stale
only lookup. Before creating a response on a normal lookup, check if
we can expect rdatasets to have been added during a staleonly lookup.
If so, clear the rdatasets from the message with the attribute
DNS_RDATASETATTR_STALE_ADDED set.
add matching macros to pass arguments from called methods
to generic methods. This will reduce the amount of work
required when extending methods.
Also cleanup unnecessary UNUSED declarations.
CDS/CDNSKEY DELETE records are only useful if they are signed,
otherwise the parent cannot verify these RRsets anyway. So once the DS
has been removed (and signaled to BIND), we can remove the DNSKEY and
RRSIG records, and at this point we can also remove the CDS/CDNSKEY
records.
The 'keymgr_key_init()' function initializes key states if they have
not been set previously. It looks at the key timing metadata and
determines using the given times whether a state should be set to
RUMOURED or OMNIPRESENT.
However, the DNSKEY and ZRRSIG states were mixed up: When looking
at the Activate timing metadata we should set the ZRRSIG state, and
when looking at the Published timing metadata we should set the
DNSKEY state.
Dynamic zones with dnssec-policy could not be thawed because KASP
zones were considered always dynamic. But a dynamic KASP zone should
also check whether updates are disabled.
The transport should also be detached when we skip a master, otherwise
named will crash when sending a SOA query to the next master over TLS,
because the transport must be NULL when we enter
'dns_view_gettransport'.
- use a value less than 2^32 for DNS_ZONEFLG_FIXJOURNAL; a larger value
could cause problems in some build environments. the zone flag
DNS_ZONEFLG_DIFFONRELOAD, which was no longer in use, has now been
deleted and its value reused for _FIXJOURNAL.
*** CID 329157: Null pointer dereferences (REVERSE_INULL)
/lib/dns/journal.c: 754 in journal_open()
748 j->header.index_size * sizeof(journal_rawpos_t));
749 }
750 if (j->index != NULL) {
751 isc_mem_put(j->mctx, j->index,
752 j->header.index_size * sizeof(journal_pos_t));
753 }
CID 329157: Null pointer dereferences (REVERSE_INULL)
Null-checking "j->filename" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
754 if (j->filename != NULL) {
755 isc_mem_free(j->mctx, j->filename);
756 }
757 if (j->fp != NULL) {
758 (void)isc_stdio_close(j->fp);
759 }
- style, cleanup, and removal of unnecessary code.
- combined isc_nm_http_add_endpoint() and isc_nm_http_add_doh_endpoint()
into one function, renamed isc_http_endpoint().
- moved isc_nm_http_connect_send_request() into doh_test.c as a helper
function; remove it from the public API.
- renamed isc_http2 and isc_nm_http2 types and functions to just isc_http
and isc_nm_http, for consistency with other existing names.
- shortened a number of long names.
- the caller is now responsible for determining the peer address.
in isc_nm_httpconnect(); this eliminates the need to parse the URI
and the dependency on an external resolver.
- the caller is also now responsible for creating the SSL client context,
for consistency with isc_nm_tlsdnsconnect().
- added setter functions for HTTP/2 ALPN. instead of setting up ALPN in
isc_tlsctx_createclient(), we now have a function
isc_tlsctx_enable_http2client_alpn() that can be run from
isc_nm_httpconnect().
- refactored isc_nm_httprequest() into separate read and send functions.
isc_nm_send() or isc_nm_read() is called on an http socket, it will
be stored until a corresponding isc_nm_read() or _send() arrives; when
we have both halves of the pair the HTTP request will be initiated.
- isc_nm_httprequest() is renamed isc__nm_http_request() for use as an
internal helper function by the DoH unit test. (eventually doh_test
should be rewritten to use read and send, and this function should
be removed.)
- added implementations of isc__nm_tls_settimeout() and
isc__nm_http_settimeout().
- increased NGHTTP2 header block length for client connections to 128K.
- use isc_mem_t for internal memory allocations inside nghttp2, to
help track memory leaks.
- send "Cache-Control" header in requests and responses. (note:
currently we try to bypass HTTP caching proxies, but ideally we should
interact with them: https://tools.ietf.org/html/rfc8484#section-5.1)
'named-journalprint -x' now prints the journal's index table and
the offset of each transaction in the journal, so that index consistency
can be confirmed.
when the 'max-ixfr-ratio' option was added, journal transaction
headers were revised to include a count of RR's in each transaction.
this made it impossible to read old journal files after an upgrade.
this branch restores the ability to read version 1 transaction
headers. when rolling forward, printing journal contents, if
the wrong transaction header format is found, we can switch.
when dns_journal_rollforward() detects a version 1 transaction
header, it returns DNS_R_RECOVERABLE. this triggers zone_postload()
to force a rewrite of the journal file in the new format, and
also to schedule a dump of the zone database with minimal delay.
journal repair is done by dns_journal_compact(), which rewrites
the entire journal, ignoring 'max-journal-size'. journal size is
corrected later.
newly created journal files now have "BIND LOG V9.2" in their headers
instead of "BIND LOG V9". files with the new version string cannot be
read using the old transaction header format. note that this means
newly created journal files will be rejected by older versions of named.
named-journalprint now takes a "-x" option, causing it to print
transaction header information before each delta, including its
format version.
When applying dnssec-policy on a dynamic zone (e.g. that allows Dynamic
Updates), the NSEC3 parameters were put on the queue, but they were
not being processed (until a reload of the zone or reconfiguration).
Process the NSEC3PARAM queue on zone postload when handling a
dynamic zone.
The 'checknames' field wasn't initialized in dns_view_create(), but it
should otherwise AddressSanitizer identifies the following runtime error
in query_test.c.
runtime error: load of value 190, which is not a valid value for type '_Bool'
On each keymgr run, we now also check if key files can be removed.
The 'purge-keys' interval determines how long keys should be retained
after they have become completely hidden.
Key files should not be removed if it has a state that is set to
something else then HIDDEN, if purge-keys is 0 (disabled), if
the key goal is set to OMNIPRESENT, or if the key is unused (a key is
unused if no timing metadata set, and no states are set or if set,
they are set to HIDDEN).
If the last changed timing metadata plus the purge-keys interval is
in the past, the key files may be removed.
Add a dst_key_t variable 'purge' to signal that the key file should
not be written to file again.
Add a new option 'purge-keys' to 'dnssec-policy' that will purge key
files for deleted keys. The option determines how long key files
should be retained prior to removing the corresponding files from
disk.
If set to 0, the option is disabled and 'named' will not remove key
files from disk.
dns_dt_open() is not currently called with mode dns_dtmode_unix.
*** CID 281489: Resource leaks (RESOURCE_LEAK)
/lib/dns/dnstap.c: 983 in dns_dt_open()
977
978 if (!dnstap_file(handle->reader)) {
979 CHECK(DNS_R_BADDNSTAP);
980 }
981 break;
982 case dns_dtmode_unix:
CID 281489: Resource leaks (RESOURCE_LEAK)
Variable "handle" going out of scope leaks the storage it points to.
983 return (ISC_R_NOTIMPLEMENTED);
984 default:
985 INSIST(0);
986 ISC_UNREACHABLE();
987 }
988
Instead of calling isc_tls_initialize()/isc_tls_destroy() explicitly use
gcc/clang attributes on POSIX and DLLMain on Windows to initialize and
shutdown OpenSSL library.
This resolves the issue when isc_nm_create() / isc_nm_destroy() was
called multiple times and it would call OpenSSL library destructors from
isc_nm_destroy().
At the same time, since we now have introduced the ctor/dtor for libisc,
this commit moves the isc_mem API initialization (the list of the
contexts) and changes the isc_mem_checkdestroyed() to schedule the
checking of memory context on library unload instead of executing the
code immediately.
Since we now require both libcrypto and libssl to be initialized for
netmgr, we move all the OpenSSL initialization code except the engine
initialization to isc_tls API.
The isc_tls_initialize() and isc_tls_destroy() has been made idempotent,
so they could be called multiple time. However when isc_tls_destroy()
has been called, the isc_tls_initialize() could not be called again.
On 24-core machine, the tests would crash because we would run out of
the hazard pointers. We now adjust the number of hazard pointers to be
in the <128,256> interval based on the number of available cores.
Note: This is just a band-aid and needs a proper fix.
Commit fa505bfb0e7623d7cfc94ae15a0246ae71000904 omitted two unit tests
while introducing the SKIP_TEST_EXIT_CODE preprocessor macro. Fix the
outliers to make use of SKIP_TEST_EXIT_CODE consistent across all unit
tests. Also make sure lib/dns/tests/dnstap_test returns an exit code
that indicates a skipped test when dnstap is not enabled.
The only reason for including the gssapi.h from the dst/gssapi.h header
was to get the typedefs of gss_cred_id_t and gss_ctx_id_t. Instead of
using those types directly this commit introduces dns_gss_cred_id_t and
dns_gss_ctx_id_t types that are being used in the public API and
privately retyped to their counterparts when we actually call the gss
api.
This also conceals the gssapi headers, so users of the libdns library
doesn't have to add GSSAPI_CFLAGS to the Makefile when including libdns
dst API.
The lmdb.h doesn't have to be included from the dns/view.h header as it
is separately included where used. This stops exposing the inclusion of
lmdb.h from the libdns headers.
This commit fix a leak which was happening every time an inline-signed
zone was added to the configuration, followed by a rndc reconfig.
During the reconfig process, the secure version of every inline-signed
zone was "moved" to a new view upon a reconfig and it "took the raw
version along", but only once the secure version was freed (at shutdown)
was prev_view for the raw version detached from, causing the old view to
be released as well.
This caused dangling references to be kept for the previous view, thus
keeping all resources used by that view in memory.
The strlcat() call was wrong.
*** CID 316608: Memory - corruptions (OVERRUN)
/lib/dns/resolver.c: 5017 in fctx_create()
5011 * Make fctx->info point to a copy of a formatted string
5012 * "name/type".
5013 */
5014 dns_name_format(name, buf, sizeof(buf));
5015 dns_rdatatype_format(type, typebuf, sizeof(typebuf));
5016 p = strlcat(buf, "/", sizeof(buf));
>>> CID 316608: Memory - corruptions (OVERRUN)
>>> Calling "strlcat" with "buf + p" and "1036UL" is suspicious because "buf" points into a buffer of 1036 bytes and the function call may access "(char *)(buf + p) + 1035UL". [Note: The source code implementation of the function has been overridden by a builtin model.]
5017 strlcat(buf + p, typebuf, sizeof(buf));
5018 fctx->info = isc_mem_strdup(mctx, buf);
5019
5020 FCTXTRACE("create");
5021 dns_name_init(&fctx->name, NULL);
5022 dns_name_dup(name, mctx, &fctx->name);
Coverity assumes that the memory holding any value read using byte
swapping is tainted. As we store the NSEC3PARAM records in wire
form and iterations is byte swapped the memory holding the record
is marked as tainted. nsec3->salt_length is marked as tainted
transitively. To remove the taint the value need to be range checked.
For a correctly formatted record region.length should match
nsec3->salt_length and provides a convenient value to check the field
against.
*** CID 316507: Insecure data handling (TAINTED_SCALAR)
/lib/dns/rdata/generic/nsec3param_51.c: 241 in tostruct_nsec3param()
235 region.length = rdata->length;
236 nsec3param->hash = uint8_consume_fromregion(®ion);
237 nsec3param->flags = uint8_consume_fromregion(®ion);
238 nsec3param->iterations = uint16_consume_fromregion(®ion);
239
240 nsec3param->salt_length = uint8_consume_fromregion(®ion);
>>> CID 316507: Insecure data handling (TAINTED_SCALAR)
>>> Passing tainted expression "nsec3param->salt_length" to "mem_maybedup", which uses it as an offset.
241 nsec3param->salt = mem_maybedup(mctx, region.base,
242 nsec3param->salt_length);
243 if (nsec3param->salt == NULL) {
244 return (ISC_R_NOMEMORY);
245 }
246 isc_region_consume(®ion, nsec3param->salt_length);
Coverity assumes that the memory holding any value read using byte
swapping is tainted. As we store the NSEC3 records in wire form
and iterations is byte swapped the memory holding the record is
marked as tainted. nsec3->salt_length and nsec3->next_length are
marked as tainted transitively. To remove the taint the values need
to be range checked. Valid values for these should never exceed
region.length so that is becomes a reasonable value to check against.
*** CID 316509: (TAINTED_SCALAR)
/lib/dns/rdata/generic/nsec3_50.c: 312 in tostruct_nsec3()
306 if (nsec3->salt == NULL) {
307 return (ISC_R_NOMEMORY);
308 }
309 isc_region_consume(®ion, nsec3->salt_length);
310
311 nsec3->next_length = uint8_consume_fromregion(®ion);
>>> CID 316509: (TAINTED_SCALAR)
>>> Passing tainted expression "nsec3->next_length" to "mem_maybedup", which uses it as an offset.
312 nsec3->next = mem_maybedup(mctx, region.base, nsec3->next_length);
313 if (nsec3->next == NULL) {
314 goto cleanup;
315 }
316 isc_region_consume(®ion, nsec3->next_length);
317
/lib/dns/rdata/generic/nsec3_50.c: 305 in tostruct_nsec3()
299 region.length = rdata->length;
300 nsec3->hash = uint8_consume_fromregion(®ion);
301 nsec3->flags = uint8_consume_fromregion(®ion);
302 nsec3->iterations = uint16_consume_fromregion(®ion);
303
304 nsec3->salt_length = uint8_consume_fromregion(®ion);
>>> CID 316509: (TAINTED_SCALAR)
>>> Passing tainted expression "nsec3->salt_length" to "mem_maybedup", which uses it as an offset.
305 nsec3->salt = mem_maybedup(mctx, region.base, nsec3->salt_length);
306 if (nsec3->salt == NULL) {
307 return (ISC_R_NOMEMORY);
308 }
309 isc_region_consume(®ion, nsec3->salt_length);
310
