Since all the libraries are internal now, just cleanup the ISCAPI remnants
in isc_socket, isc_task and isc_timer APIs. This means, there's one less
layer as following changes have been done:
* struct isc_socket and struct isc_socketmgr have been removed
* struct isc__socket and struct isc__socketmgr have been renamed
to struct isc_socket and struct isc_socketmgr
* struct isc_task and struct isc_taskmgr have been removed
* struct isc__task and struct isc__taskmgr have been renamed
to struct isc_task and struct isc_taskmgr
* struct isc_timer and struct isc_timermgr have been removed
* struct isc__timer and struct isc__timermgr have been renamed
to struct isc_timer and struct isc_timermgr
* All the associated code that dealt with typing isc_<foo>
to isc__<foo> and back has been removed.
Previously, the taskmgr, timermgr and socketmgr had a constructor
variant, that would create the mgr on top of existing appctx. This was
no longer true and isc_<*>mgr was just calling isc_<*>mgr_create()
directly without any extra code.
This commit just cleans up the extra function.
The isc_nm_*connect() functions were refactored to always return the
connection status via the connect callback instead of sometimes returning
the hard failure directly (for example, when the socket could not be
created, or when the network manager was shutting down).
This commit changes the connect functions in all the network manager
modules, and also makes the necessary refactoring changes in places
where the connect functions are called.
util.h requires ISC_CONSTRUCTOR definition, which depends on config.h
inclusion. It does not include it from isc/util.h (or any other header).
Using isc/util.h fails hard when isc/util.h is used without including
bind's config.h.
Move the check to c file, where ISC_CONSTRUCTOR is used. Ensure config.h
is included there.
The current isc_time_now uses CLOCK_REALTIME_COARSE which only updates
on a timer tick. This clock is generally fine for millisecond accuracy,
but on servers with 100hz clocks, this clock is nowhere near accurate
enough for microsecond accuracy.
This commit adds a new isc_time_now_hires function that uses
CLOCK_REALTIME, which gives the current time, though it is somewhat
expensive to call. When microsecond accuracy is required, it may be
required to use extra resources for higher accuracy.
The RFC7828 specifies the keepalive interval to be 16-bit, specified in
units of 100 milliseconds and the configuration options tcp-*-timeouts
are following the suit. The units of 100 milliseconds are very
unintuitive and while we can't change the configuration and presentation
format, we should not follow this weird unit in the API.
This commit changes the isc_nm_(get|set)timeouts() functions to work
with milliseconds and convert the values to milliseconds before passing
them to the function, not just internally.
After the TCPDNS refactoring the initial and idle timers were broken and
only the tcp-initial-timeout was always applied on the whole TCP
connection.
This broke any TCP connection that took longer than tcp-initial-timeout,
most often this would affect large zone AXFRs.
This commit changes the timeout logic in this way:
* On TCP connection accept the tcp-initial-timeout is applied
and the timer is started
* When we are processing and/or sending any DNS message the timer is
stopped
* When we stop processing all DNS messages, the tcp-idle-timeout
is applied and the timer is started again
- style, cleanup, and removal of unnecessary code.
- combined isc_nm_http_add_endpoint() and isc_nm_http_add_doh_endpoint()
into one function, renamed isc_http_endpoint().
- moved isc_nm_http_connect_send_request() into doh_test.c as a helper
function; remove it from the public API.
- renamed isc_http2 and isc_nm_http2 types and functions to just isc_http
and isc_nm_http, for consistency with other existing names.
- shortened a number of long names.
- the caller is now responsible for determining the peer address.
in isc_nm_httpconnect(); this eliminates the need to parse the URI
and the dependency on an external resolver.
- the caller is also now responsible for creating the SSL client context,
for consistency with isc_nm_tlsdnsconnect().
- added setter functions for HTTP/2 ALPN. instead of setting up ALPN in
isc_tlsctx_createclient(), we now have a function
isc_tlsctx_enable_http2client_alpn() that can be run from
isc_nm_httpconnect().
- refactored isc_nm_httprequest() into separate read and send functions.
isc_nm_send() or isc_nm_read() is called on an http socket, it will
be stored until a corresponding isc_nm_read() or _send() arrives; when
we have both halves of the pair the HTTP request will be initiated.
- isc_nm_httprequest() is renamed isc__nm_http_request() for use as an
internal helper function by the DoH unit test. (eventually doh_test
should be rewritten to use read and send, and this function should
be removed.)
- added implementations of isc__nm_tls_settimeout() and
isc__nm_http_settimeout().
- increased NGHTTP2 header block length for client connections to 128K.
- use isc_mem_t for internal memory allocations inside nghttp2, to
help track memory leaks.
- send "Cache-Control" header in requests and responses. (note:
currently we try to bypass HTTP caching proxies, but ideally we should
interact with them: https://tools.ietf.org/html/rfc8484#section-5.1)
Instead of calling isc_tls_initialize()/isc_tls_destroy() explicitly use
gcc/clang attributes on POSIX and DLLMain on Windows to initialize and
shutdown OpenSSL library.
This resolves the issue when isc_nm_create() / isc_nm_destroy() was
called multiple times and it would call OpenSSL library destructors from
isc_nm_destroy().
At the same time, since we now have introduced the ctor/dtor for libisc,
this commit moves the isc_mem API initialization (the list of the
contexts) and changes the isc_mem_checkdestroyed() to schedule the
checking of memory context on library unload instead of executing the
code immediately.
The two memory debugging features: ISC_MEM_DEFAULTFILL
(ISC_MEMFLAG_FILL) and ISC_MEM_TRACKLINES were always enabled in all
builds and the former was only disabled in `named`.
This commits disables those two features in non-developer build to make
the memory allocator significantly faster.
This is yet another step into unlocking some parts of the memory
contexts. All the regularly updated variables has been turned into
atomic types, so we can later remove the locks when updating various
counters.
Also unlock as much code as possible without breaking anything.
On 24-core machine, the tests would crash because we would run out of
the hazard pointers. We now adjust the number of hazard pointers to be
in the <128,256> interval based on the number of available cores.
Note: This is just a band-aid and needs a proper fix.
Previously, the applications using libisc would be able to override the
internal memory methods with own implementation. This was no longer
possible, but the extra level of indirection was not removed. This
commit removes the extra level of indirection for the memory methods and
the default_memalloc() and default_memfree().
The internal memory allocator had an extra code to keep a list of blocks
for small size allocation. This would help to reduce the interactions
with the system malloc as the memory would be already allocated from the
system, but there's an extra cost associated with that - all the
allocations/deallocations must be locked, effectively eliminating any
optimizations in the system allocator targeted at multi-threaded
applications. While the isc_mem API is still using locks pretty heavily,
this is a first step into reducing the memory allocation/deallocation
contention.
The <isc/readline.h> header provided a compatibility shim to use when
other non-GNU readline libraries are in use. The two places where
readline library is being used is nslookup and nsupdate, so the header
file has been moved to bin/dig directory and it's directly included from
bin/nsupdate.
This also conceals any readline headers exposed from the libisc headers.
This commit completes the support for DNS-over-HTTP(S) built on top of
nghttp2 and plugs it into the BIND. Support for both GET and POST
requests is present, as required by RFC8484.
Both encrypted (via TLS) and unencrypted HTTP/2 connections are
supported. The latter are mostly there for debugging/troubleshooting
purposes and for the means of encryption offloading to third-party
software (as might be desirable in some environments to simplify TLS
certificates management).
This commit includes work-in-progress implementation of
DNS-over-HTTP(S).
Server-side code remains mostly untested, and there is only support
for POST requests.
This commit resurrects the old TLS code from
8f73c70d23e26954165fd44ce5617a95f112bcff.
It also includes numerous stability fixes and support for
isc_nm_cancelread() for the TLS layer.
The code was resurrected to be used for DoH.
* Following the example set in 634bdfb16d8, the tlsdns netmgr
module now uses libuv and SSL primitives directly, rather than
opening a TLS socket which opens a TCP socket, as the previous
model was difficult to debug. Closes#2335.
* Remove the netmgr tls layer (we will have to re-add it for DoH)
* Add isc_tls API to wrap the OpenSSL SSL_CTX object into libisc
library; move the OpenSSL initialization/deinitialization from dstapi
needed for OpenSSL 1.0.x to the isc_tls_{initialize,destroy}()
* Add couple of new shims needed for OpenSSL 1.0.x
* When LibreSSL is used, require at least version 2.7.0 that
has the best OpenSSL 1.1.x compatibility and auto init/deinit
* Enforce OpenSSL 1.1.x usage on Windows
* Added a TLSDNS unit test and implemented a simple TLSDNS echo
server and client.
This is a part of the works that intends to make the netmgr stable,
testable, maintainable and tested. It contains a numerous changes to
the netmgr code and unfortunately, it was not possible to split this
into smaller chunks as the work here needs to be committed as a complete
works.
NOTE: There's a quite a lot of duplicated code between udp.c, tcp.c and
tcpdns.c and it should be a subject to refactoring in the future.
The changes that are included in this commit are listed here
(extensively, but not exclusively):
* The netmgr_test unit test was split into individual tests (udp_test,
tcp_test, tcpdns_test and newly added tcp_quota_test)
* The udp_test and tcp_test has been extended to allow programatic
failures from the libuv API. Unfortunately, we can't use cmocka
mock() and will_return(), so we emulate the behaviour with #define and
including the netmgr/{udp,tcp}.c source file directly.
* The netievents that we put on the nm queue have variable number of
members, out of these the isc_nmsocket_t and isc_nmhandle_t always
needs to be attached before enqueueing the netievent_<foo> and
detached after we have called the isc_nm_async_<foo> to ensure that
the socket (handle) doesn't disappear between scheduling the event and
actually executing the event.
* Cancelling the in-flight TCP connection using libuv requires to call
uv_close() on the original uv_tcp_t handle which just breaks too many
assumptions we have in the netmgr code. Instead of using uv_timer for
TCP connection timeouts, we use platform specific socket option.
* Fix the synchronization between {nm,async}_{listentcp,tcpconnect}
When isc_nm_listentcp() or isc_nm_tcpconnect() is called it was
waiting for socket to either end up with error (that path was fine) or
to be listening or connected using condition variable and mutex.
Several things could happen:
0. everything is ok
1. the waiting thread would miss the SIGNAL() - because the enqueued
event would be processed faster than we could start WAIT()ing.
In case the operation would end up with error, it would be ok, as
the error variable would be unchanged.
2. the waiting thread miss the sock->{connected,listening} = `true`
would be set to `false` in the tcp_{listen,connect}close_cb() as
the connection would be so short lived that the socket would be
closed before we could even start WAIT()ing
* The tcpdns has been converted to using libuv directly. Previously,
the tcpdns protocol used tcp protocol from netmgr, this proved to be
very complicated to understand, fix and make changes to. The new
tcpdns protocol is modeled in a similar way how tcp netmgr protocol.
Closes: #2194, #2283, #2318, #2266, #2034, #1920
* The tcp and tcpdns is now not using isc_uv_import/isc_uv_export to
pass accepted TCP sockets between netthreads, but instead (similar to
UDP) uses per netthread uv_loop listener. This greatly reduces the
complexity as the socket is always run in the associated nm and uv
loops, and we are also not touching the libuv internals.
There's an unfortunate side effect though, the new code requires
support for load-balanced sockets from the operating system for both
UDP and TCP (see #2137). If the operating system doesn't support the
load balanced sockets (either SO_REUSEPORT on Linux or SO_REUSEPORT_LB
on FreeBSD 12+), the number of netthreads is limited to 1.
* The netmgr has now two debugging #ifdefs:
1. Already existing NETMGR_TRACE prints any dangling nmsockets and
nmhandles before triggering assertion failure. This options would
reduce performance when enabled, but in theory, it could be enabled
on low-performance systems.
2. New NETMGR_TRACE_VERBOSE option has been added that enables
extensive netmgr logging that allows the software engineer to
precisely track any attach/detach operations on the nmsockets and
nmhandles. This is not suitable for any kind of production
machine, only for debugging.
* The tlsdns netmgr protocol has been split from the tcpdns and it still
uses the old method of stacking the netmgr boxes on top of each other.
We will have to refactor the tlsdns netmgr protocol to use the same
approach - build the stack using only libuv and openssl.
* Limit but not assert the tcp buffer size in tcp_alloc_cb
Closes: #2061
Add server-side TLS support to netmgr - that includes moving some of the
isc_nm_ functions from tcp.c to a wrapper in netmgr.c calling a proper
tcp or tls function, and a new isc_nm_listentls() function.
Add DoT support to tcpdns - isc_nm_listentlsdns().
this function sets the read timeout for the socket associated
with a netmgr handle and, if the timer is running, resets it.
for TCPDNS sockets it also sets the read timeout and resets the
timer on the outer TCP socket.
- isc_nm_tcpdnsconnect() sets up up an outgoing TCP DNS connection.
- isc_nm_tcpconnect(), _udpconnect() and _tcpdnsconnect() now take a
timeout argument to ensure connections time out and are correctly
cleaned up on failure.
- isc_nm_read() now supports UDP; it reads a single datagram and then
stops until the next time it's called.
- isc_nm_cancelread() now runs asynchronously to prevent assertion
failure if reading is interrupted by a non-network thread (e.g.
a timeout).
- isc_nm_cancelread() can now apply to UDP sockets.
- added shim code to support UDP connection in versions of libuv
prior to 1.27, when uv_udp_connect() was added
all these functions will be used to support outgoing queries in dig,
xfrin, dispatch, etc.
1. The isc__nm_tcp_send() and isc__nm_tcp_read() was not checking
whether the socket was still alive and scheduling reads/sends on
closed socket.
2. The isc_nm_read(), isc_nm_send() and isc_nm_resumeread() have been
changed to always return the error conditions via the callbacks, so
they always succeed. This applies to all protocols (UDP, TCP and
TCPDNS).
Attaching and detaching handle pointers will make it easier to
determine where and why reference counting errors have occurred.
A handle needs to be referenced more than once when multiple
asynchronous operations are in flight, so callers must now maintain
multiple handle pointers for each pending operation. For example,
ns_client objects now contain:
- reqhandle: held while waiting for a request callback (query,
notify, update)
- sendhandle: held while waiting for a send callback
- fetchhandle: held while waiting for a recursive fetch to
complete
- updatehandle: held while waiting for an update-forwarding
task to complete
control channel connection objects now contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- cmdhandle: held while an rndc command is running
httpd connections contain:
- readhandle: held while waiting for a read callback
- sendhandle: held while waiting for a send callback
- rename isc_nmsocket_t->tcphandle to statichandle
- cancelread functions now take handles instead of sockets
- add a 'client' flag in socket objects, currently unused, to
indicate whether it is to be used as a client or server socket
While
if (isc_refcount_decrement() == 1) { // memory_order_release
isc_refcount_destroy(); // memory_order_acquire
...
}
is theoretically the most efficent in practice, using
memory_order_acq_rel produces the same code on x86_64 and doesn't
trigger tsan data races (which use a idealistic model) if
isc_refcount_destroy() is not called immediately. In fact
isc_refcount_destroy() could be removed if we didn't want
to check for the count being 0 when isc_refcount_destroy() is
called.
https://stackoverflow.com/questions/49112732/memory-order-in-shared-pointer-destructor
This commit updates and simplifies the checks for the readline support
in nslookup and nsupdate:
* Change the autoconf checks to pkg-config only, all supported
libraries have accompanying .pc files now.
* Add editline support in addition to libedit and GNU readline
* Add isc/readline.h shim header that defines dummy readline()
function when no readline library is available
When pk11_numbits() is passed a user provided input that contains all
zeroes (via crafted DNS message), it would crash with assertion
failure. Fix that by properly handling such input.
Created isc_refcount_decrement_expect macro to test conditionally
the return value to ensure it is in expected range. Converted
unchecked isc_refcount_decrement to use isc_refcount_decrement_expect.
Converted INSIST(isc_refcount_decrement()...) to isc_refcount_decrement_expect.
The stdatomic shims for non-C11 compilers (Windows, old gcc, ...) and
mutexatomic implemented only and minimal subset of the atomic types.
This commit adds 16-bit operations for Windows and all atomic types as
defined in standard.
the blackhole ACL was accidentally disabled with respect to client
queries during the netmgr conversion.
in order to make this work for TCP, it was necessary to add a return
code to the accept callback functions passed to isc_nm_listentcp() and
isc_nm_listentcpdns().
The isc_nm_cancelread() function cancels reading on a connected
socket and calls its read callback function with a 'result'
parameter of ISC_R_CANCELED.
the isc_nm_tcpconnect() function establishes a client connection via
TCP. once the connection is esablished, a callback function will be
called with a newly created network manager handle.
