This commit makes BIND return HTTP status codes for malformed or too
small requests.
DNS request processing code would ignore such requests. Such an
approach works well for other DNS transport but does not make much
sense for HTTP, not allowing it to complete the request/response
sequence.
Suppose execution has reached the point where DNS message handling
code has been called. In that case, it means that the HTTP request has
been successfully processed, and, thus, we are expected to respond to
it either with a message containing some DNS payload or at least to
return an error status code. This commit ensures that BIND behaves
this way.
This commit adds two new autoconf options `--enable-doh` (enabled by
default) and `--with-libnghttp2` (mandatory when DoH is enabled).
When DoH support is disabled the library is not linked-in and support
for http(s) protocol is disabled in the netmgr, named and dig.
In DNS Flag Day 2020, we started setting the DF (Don't Fragment socket
option on the UDP sockets. It turned out, that this code was incomplete
leading to dropping the outgoing UDP packets.
This has been now remedied, so it is possible to disable the
fragmentation on the UDP sockets again as the sending error is now
handled by sending back an empty response with TC (truncated) bit set.
This reverts commit 66eefac78c92b64b6689a1655cc677a2b1d13496.
Previously, each protocol (TCPDNS, TLSDNS) has specified own function to
disable pipelining on the connection. An oversight would lead to
assertion failure when opcode is not query over non-TCPDNS protocol
because the isc_nm_tcpdns_sequential() function would be called over
non-TCPDNS socket. This commit removes the per-protocol functions and
refactors the code to have and use common isc_nm_sequential() function
that would either disable the pipelining on the socket or would handle
the request in per specific manner. Currently it ignores the call for
HTTP sockets and causes assertion failure for protocols where it doesn't
make sense to call the function at all.
This commit makes NM code to report HTTP as a stream protocol. This
makes it possible to handle large responses properly. Like:
dig +https @127.0.0.1 A cmts1-dhcp.longlines.com
The Windows support has been completely removed from the source tree
and BIND 9 now no longer supports native compilation on Windows.
We might consider reviewing mingw-w64 port if contributed by external
party, but no development efforts will be put into making BIND 9 compile
and run on Windows again.
The libuv has a support for running long running tasks in the dedicated
threadpools, so it doesn't affect networking IO.
This commit adds isc_nm_work_enqueue() wrapper that would wraps around
the libuv API and runs it on top of associated worker loop.
The only limitation is that the function must be called from inside
network manager thread, so the call to the function should be wrapped
inside a (bound) task.
configuring with --enable-mutex-atomics flagged these incorrectly
initialised variables on systems where pthread_mutex_init doesn't
just zero out the structure.
The isc_nmiface_t type was holding just a single isc_sockaddr_t,
so we got rid of the datatype and use plain isc_sockaddr_t in place
where isc_nmiface_t was used before. This means less type-casting and
shorter path to access isc_sockaddr_t members.
At the same time, instead of keeping the reference to the isc_sockaddr_t
that was passed to us when we start listening, we will keep a local
copy. This prevents the data race on destruction of the ns_interface_t
objects where pending nmsockets could reference the sockaddr of already
destroyed ns_interface_t object.
Previously, as a way of reducing the contention between threads a
clientmgr object would be created for each interface/IP address.
We tasks being more strictly bound to netmgr workers, this is no longer
needed and we can just create clientmgr object per worker queue (ncpus).
Each clientmgr object than would have a single task and single memory
context.
Instead of using fixed quantum, this commit adds atomic counter for
number of items on each queue and uses the number of netievents
scheduled to run as the limit of maximum number of netievents for a
single process_queue() run.
This prevents the endless loops when the netievent would schedule more
netievents onto the same loop, but we don't have to pick "magic" number
for the quantum.
This commit adds a new configuration option to set the receive and send
buffer sizes on the TCP and UDP netmgr sockets. The default is `0`
which doesn't set any value and just uses the value set by the operating
system.
There's no magic value here - set it too small and the performance will
drop, set it too large, the buffers can fill-up with queries that have
already timeouted on the client side and nobody is interested for the
answer and this would just make the server clog up even more by making
it produce useless work.
The `netstat -su` can be used on POSIX systems to monitor the receive
and send buffer errors.
Network manager events that require interlock (pause, resume, listen)
are now always executed in the same worker thread, mgr->workers[0],
to prevent races.
"stoplistening" events no longer require interlock.
- ensure isc_nm_pause() and isc_nm_resume() work the same whether
run from inside or outside of the netmgr.
- promote 'stop' events to the priority event level so they can
run while the netmgr is pausing or paused.
- when pausing, drain the priority queue before acquiring an
interlock; this prevents a deadlock when another thread is waiting
for us to complete a task.
- release interlock after pausing, reacquire it when resuming, so
that stop events can happen.
some incidental changes:
- use a function to enqueue pause and resume events (this was part of a
different change attempt that didn't work out; I kept it because I
thought was more readable).
- make mgr->nworkers a signed int to remove some annoying integer casts.
The netmgr listening, stoplistening, pausing and resuming functions
now use barriers for synchronization, which makes the code much simpler.
isc/barrier.h defines isc_barrier macros as a front-end for uv_barrier
on platforms where that works, and pthread_barrier where it doesn't
(including TSAN builds).
all zone loading tasks have the privileged flag, but we only want
them to run as privileged tasks when the server is being initialized;
if we privilege them the rest of the time, the server may hang for a
long time after a reload/reconfig. so now we call isc_taskmgr_setmode()
to turn privileged execution mode on or off in the task manager.
isc_task_privileged() returns true if the task's privilege flag is
set *and* the taskmgr is in privileged execution mode. this is used
to determine in which netmgr event queue the task should be run.
There was a theoretical possibility of clogging up the queue processing
with an endless loop where currently processing netievent would schedule
new netievent that would get processed immediately. This wasn't such a
problem when only netmgr netievents were processed, but with the
addition of the tasks, there are at least two situation where this could
happen:
1. In lib/dns/zone.c:setnsec3param() the task would get re-enqueued
when the zone was not yet fully loaded.
2. Tasks have internal quantum for maximum number of isc_events to be
processed, when the task quantum is reached, the task would get
rescheduled and then immediately processed by the netmgr queue
processing.
As the isc_queue doesn't have a mechanism to atomically move the queue,
this commit adds a mechanism to quantize the queue, so enqueueing new
netievents will never stop processing other uv_loop_t events.
The default quantum size is 128.
Since the queue used in the network manager allows items to be enqueued
more than once, tasks are now reference-counted around task_ready()
and task_run(). task_ready() now has a public API wrapper,
isc_task_ready(), that the netmgr can use to reschedule processing
of a task if the quantum has been reached.
Incidental changes: Cleaned up some unused fields left in isc_task_t
and isc_taskmgr_t after the last refactoring, and changed atomic
flags to atomic_bools for easier manipulation.
With taskmgr running on top of netmgr, the ordering of how the tasks and
netmgr shutdown interacts was wrong as previously isc_taskmgr_destroy()
was waiting until all tasks were properly shutdown and detached. This
responsibility was moved to netmgr, so we now need to do the following:
1. shutdown all the tasks - this schedules all shutdown events onto
the netmgr queue
2. shutdown the netmgr - this also makes sure all the tasks and
events are properly executed
3. Shutdown the taskmgr - this now waits for all the tasks to finish
running before returning
4. Shutdown the netmgr - this call waits for all the netmgr netievents
to finish before returning
This solves the race when the taskmgr object would be destroyed before
all the tasks were finished running in the netmgr loops.
Previously, netmgr, taskmgr, timermgr and socketmgr all had their own
isc_<*>mgr_create() and isc_<*>mgr_destroy() functions. The new
isc_managers_create() and isc_managers_destroy() fold all four into a
single function and makes sure the objects are created and destroy in
correct order.
Especially now, when taskmgr runs on top of netmgr, the correct order is
important and when the code was duplicated at many places it's easy to
make mistake.
The former isc_<*>mgr_create() and isc_<*>mgr_destroy() functions were
made private and a single call to isc_managers_create() and
isc_managers_destroy() is required at the program startup / shutdown.
This commit adds support for generating backtraces on Windows and
refactors the isc_backtrace API to match the Linux/BSD API (without
the isc_ prefix)
* isc_backtrace_gettrace() was renamed to isc_backtrace(), the third
argument was removed and the return type was changed to int
* isc_backtrace_symbols() was added
* isc_backtrace_symbols_fd() was added and used as appropriate
when running read callbacks, if the event result is not ISC_R_SUCCESS,
the callback is always run asynchronously. this is a problem on timeout,
because there's no chance to reset the timer before the socket has
already been destroyed. this commit allows read callbacks to run
synchronously for both ISC_R_SUCCESS and ISC_R_TIMEDOUT result codes.
This commit changes the taskmgr to run the individual tasks on the
netmgr internal workers. While an effort has been put into keeping the
taskmgr interface intact, couple of changes have been made:
* The taskmgr has no concept of universal privileged mode - rather the
tasks are either privileged or unprivileged (normal). The privileged
tasks are run as a first thing when the netmgr is unpaused. There
are now four different queues in in the netmgr:
1. priority queue - netievent on the priority queue are run even when
the taskmgr enter exclusive mode and netmgr is paused. This is
needed to properly start listening on the interfaces, free
resources and resume.
2. privileged task queue - only privileged tasks are queued here and
this is the first queue that gets processed when network manager
is unpaused using isc_nm_resume(). All netmgr workers need to
clean the privileged task queue before they all proceed normal
operation. Both task queues are processed when the workers are
finished.
3. task queue - only (traditional) task are scheduled here and this
queue along with privileged task queues are process when the
netmgr workers are finishing. This is needed to process the task
shutdown events.
4. normal queue - this is the queue with netmgr events, e.g. reading,
sending, callbacks and pretty much everything is processed here.
* The isc_taskmgr_create() now requires initialized netmgr (isc_nm_t)
object.
* The isc_nm_destroy() function now waits for indefinite time, but it
will print out the active objects when in tracing mode
(-DNETMGR_TRACE=1 and -DNETMGR_TRACE_VERBOSE=1), the netmgr has been
made a little bit more asynchronous and it might take longer time to
shutdown all the active networking connections.
* Previously, the isc_nm_stoplistening() was a synchronous operation.
This has been changed and the isc_nm_stoplistening() just schedules
the child sockets to stop listening and exits. This was needed to
prevent a deadlock as the the (traditional) tasks are now executed on
the netmgr threads.
* The socket selection logic in isc__nm_udp_send() was flawed, but
fortunatelly, it was broken, so we never hit the problem where we
created uvreq_t on a socket from nmhandle_t, but then a different
socket could be picked up and then we were trying to run the send
callback on a socket that had different threadid than currently
running.
The isc_nm_tlsdnsconnect() call could end up with two connect callbacks
called when the timeout fired and the TCP connection was aborted,
but the TLS handshake was not complete yet. isc__nm_connecttimeout_cb()
forgot to clean up sock->tls.pending_req when the connect callback was
called with ISC_R_TIMEDOUT, leading to a second callback running later.
A new argument has been added to the isc__nm_*_failed_connect_cb and
isc__nm_*_failed_read_cb functions, to indicate whether the callback
needs to run asynchronously or not.
The isc_nm_*connect() functions were refactored to always return the
connection status via the connect callback instead of sometimes returning
the hard failure directly (for example, when the socket could not be
created, or when the network manager was shutting down).
This commit changes the connect functions in all the network manager
modules, and also makes the necessary refactoring changes in places
where the connect functions are called.
The TCP module has been updated to use the generic functions from
netmgr.c instead of its own local copies. This brings the module
mostly up to par with the TCPDNS and TLSDNS modules.
Serveral problems were discovered and fixed after the change in
the connection timeout in the previous commits:
* In TLSDNS, the connection callback was not called at all under some
circumstances when the TCP connection had been established, but the
TLS handshake hadn't been completed yet. Additional checks have
been put in place so that tls_cycle() will end early when the
nmsocket is invalidated by the isc__nm_tlsdns_shutdown() call.
* In TCP, TCPDNS and TLSDNS, new connections would be established
even when the network manager was shutting down. The new
call isc__nm_closing() has been added and is used to bail out
early even before uv_tcp_connect() is attempted.
Similarly to the read timeout, it's now possible to recover from
ISC_R_TIMEDOUT event by restarting the timer from the connect callback.
The change here also fixes platforms that missing the socket() options
to set the TCP connection timeout, by moving the timeout code into user
space. On platforms that support setting the connect timeout via a
socket option, the timeout has been hardcoded to 2 minutes (the maximum
value of tcp-initial-timeout).
Previously, when the client timed out on read, the client socket would
be automatically closed and destroyed when the nmhandle was detached.
This commit changes the logic so that it's possible for the callback to
recover from the ISC_R_TIMEDOUT event by restarting the timer. This is
done by calling isc_nmhandle_settimeout(), which prevents the timeout
handling code from destroying the socket; instead, it continues to wait
for data.
One specific use case for multiple timeouts is serve-stale - the client
socket could be created with shorter timeout (as specified with
stale-answer-client-timeout), so we can serve the requestor with stale
answer, but keep the original query running for a longer time.
When NETMGR_TRACE(_VERBOSE) is enabled, the build would fail on some
non-Linux non-glibc platforms because:
* Use <stdint.h> print macros because uint_fast32_t is not always
unsigned long
* The header <execinfo.h> is not available on non-glibc, thus commit
adds dummy backtrace() and backtrace_symbols_fd() functions for
platforms without HAVE_BACKTRACE
The RFC7828 specifies the keepalive interval to be 16-bit, specified in
units of 100 milliseconds and the configuration options tcp-*-timeouts
are following the suit. The units of 100 milliseconds are very
unintuitive and while we can't change the configuration and presentation
format, we should not follow this weird unit in the API.
This commit changes the isc_nm_(get|set)timeouts() functions to work
with milliseconds and convert the values to milliseconds before passing
them to the function, not just internally.
The udp, tcpdns and tlsdns contained lot of cut&paste code or code that
was very similar making the stack harder to maintain as any change to
one would have to be copied to the the other protocols.
In this commit, we merge the common parts into the common functions
under isc__nm_<foo> namespace and just keep the little differences based
on the socket type.
After the TCPDNS refactoring the initial and idle timers were broken and
only the tcp-initial-timeout was always applied on the whole TCP
connection.
This broke any TCP connection that took longer than tcp-initial-timeout,
most often this would affect large zone AXFRs.
This commit changes the timeout logic in this way:
* On TCP connection accept the tcp-initial-timeout is applied
and the timer is started
* When we are processing and/or sending any DNS message the timer is
stopped
* When we stop processing all DNS messages, the tcp-idle-timeout
is applied and the timer is started again
It is advisable to disable Nagle's algorithm for HTTP/2 connections
because multiple HTTP/2 streams could be multiplexed over one
transport connection. Thus, delays when delivering small packets could
bring down performance for the whole session. HTTP/2 is meant to be
used this way.
- style, cleanup, and removal of unnecessary code.
- combined isc_nm_http_add_endpoint() and isc_nm_http_add_doh_endpoint()
into one function, renamed isc_http_endpoint().
- moved isc_nm_http_connect_send_request() into doh_test.c as a helper
function; remove it from the public API.
- renamed isc_http2 and isc_nm_http2 types and functions to just isc_http
and isc_nm_http, for consistency with other existing names.
- shortened a number of long names.
- the caller is now responsible for determining the peer address.
in isc_nm_httpconnect(); this eliminates the need to parse the URI
and the dependency on an external resolver.
- the caller is also now responsible for creating the SSL client context,
for consistency with isc_nm_tlsdnsconnect().
- added setter functions for HTTP/2 ALPN. instead of setting up ALPN in
isc_tlsctx_createclient(), we now have a function
isc_tlsctx_enable_http2client_alpn() that can be run from
isc_nm_httpconnect().
- refactored isc_nm_httprequest() into separate read and send functions.
isc_nm_send() or isc_nm_read() is called on an http socket, it will
be stored until a corresponding isc_nm_read() or _send() arrives; when
we have both halves of the pair the HTTP request will be initiated.
- isc_nm_httprequest() is renamed isc__nm_http_request() for use as an
internal helper function by the DoH unit test. (eventually doh_test
should be rewritten to use read and send, and this function should
be removed.)
- added implementations of isc__nm_tls_settimeout() and
isc__nm_http_settimeout().
- increased NGHTTP2 header block length for client connections to 128K.
- use isc_mem_t for internal memory allocations inside nghttp2, to
help track memory leaks.
- send "Cache-Control" header in requests and responses. (note:
currently we try to bypass HTTP caching proxies, but ideally we should
interact with them: https://tools.ietf.org/html/rfc8484#section-5.1)
Instead of calling isc_tls_initialize()/isc_tls_destroy() explicitly use
gcc/clang attributes on POSIX and DLLMain on Windows to initialize and
shutdown OpenSSL library.
This resolves the issue when isc_nm_create() / isc_nm_destroy() was
called multiple times and it would call OpenSSL library destructors from
isc_nm_destroy().
At the same time, since we now have introduced the ctor/dtor for libisc,
this commit moves the isc_mem API initialization (the list of the
contexts) and changes the isc_mem_checkdestroyed() to schedule the
checking of memory context on library unload instead of executing the
code immediately.
In DNS Flag Day 2020, the development branch started setting the
IP_DONTFRAG option on the UDP sockets. It turned out, that this
code was incomplete leading to dropping the outgoing UDP packets.
Henceforth this commit rolls back this setting until we have a
proper fix that would send back empty response with TC flag set.
This commit completes the support for DNS-over-HTTP(S) built on top of
nghttp2 and plugs it into the BIND. Support for both GET and POST
requests is present, as required by RFC8484.
Both encrypted (via TLS) and unencrypted HTTP/2 connections are
supported. The latter are mostly there for debugging/troubleshooting
purposes and for the means of encryption offloading to third-party
software (as might be desirable in some environments to simplify TLS
certificates management).
This commit includes work-in-progress implementation of
DNS-over-HTTP(S).
Server-side code remains mostly untested, and there is only support
for POST requests.
This commit resurrects the old TLS code from
8f73c70d23e26954165fd44ce5617a95f112bcff.
It also includes numerous stability fixes and support for
isc_nm_cancelread() for the TLS layer.
The code was resurrected to be used for DoH.
* Following the example set in 634bdfb16d8, the tlsdns netmgr
module now uses libuv and SSL primitives directly, rather than
opening a TLS socket which opens a TCP socket, as the previous
model was difficult to debug. Closes#2335.
* Remove the netmgr tls layer (we will have to re-add it for DoH)
* Add isc_tls API to wrap the OpenSSL SSL_CTX object into libisc
library; move the OpenSSL initialization/deinitialization from dstapi
needed for OpenSSL 1.0.x to the isc_tls_{initialize,destroy}()
* Add couple of new shims needed for OpenSSL 1.0.x
* When LibreSSL is used, require at least version 2.7.0 that
has the best OpenSSL 1.1.x compatibility and auto init/deinit
* Enforce OpenSSL 1.1.x usage on Windows
* Added a TLSDNS unit test and implemented a simple TLSDNS echo
server and client.
On Windows, we were limiting the number of listening children to just 1,
but we were then iterating on mgr->nworkers. That lead to scheduling
more async_*listen() than actually allocated and out-of-bound read-write
operation on the heap.
On FreeBSD, the option to configure connection timeout is called
TCP_KEEPINIT, use it to configure the connection timeout there.
This also fixes the dangling socket problems in the unit test, so
re-enable them.
On platforms without load-balancing socket all the queries would be
handle by a single thread. Currently, the support for load-balanced
sockets is present in Linux with SO_REUSEPORT and FreeBSD 12 with
SO_REUSEPORT_LB.
This commit adds workaround for such platforms that:
1. setups single shared listening socket for all listening nmthreads for
UDP, TCP and TCPDNS netmgr transports
2. Calls uv_udp_bind/uv_tcp_bind on the underlying socket just once and
for rest of the nmthreads only copy the internal libuv flags (should
be just UV_HANDLE_BOUND and optionally UV_HANDLE_IPV6).
3. start reading on UDP socket or listening on TCP socket
The load distribution among the nmthreads is uneven, but it's still
better than utilizing just one thread for processing all the incoming
queries
On Windows, WSAStartup() needs to be called to initialize Winsock before
any sockets are created or else socket() calls will return error code
10093 (WSANOTINITIALISED). Since BIND's Network Manager is intended to
work as a reusable networking library, it should take care of calling
WSAStartup() - and its cleanup counterpart, WSACleanup() - itself rather
than relying on external code to do it. Add the necessary WSAStartup()
and WSACleanup() calls to isc_nm_start() and isc_nm_destroy(),
respectively.
