All the applications built on top of the loop manager were required to
create just a single instance of the loop manager. Refactor the loop
manager to not expose this instance to the callers and keep the loop
manager object internal to the isc_loop compilation unit.
This significantly simplifies a number of data structures and calls to
the isc_loop API.
Previously all kinds of TCP timeouts had a single getter and setter
functions. Separate each timeout to its own getter/setter functions,
because in majority of cases only one is required at a time, and it's
not optimal expanding those functions every time a new timeout value
is implemented.
The new 'tcp-primaries-timeout' configuration option works the same way
as the existing 'tcp-initial-timeout' option, but applies only to the
TCP connections made to the primary servers, so that the timeout value
can be set separately for them. The default is 15 seconds.
Also, while accommodating zone.c's code to support the new option, make
a light refactoring with the way UDP timeouts are calculated by using
definitions instead of hardcoded values.
Instead of relying on unreliable order of execution of the library
constructors and destructors, move them to individual binaries. The
advantage is that the execution time and order will remain constant and
will not depend on the dynamic load dependency solver.
This requires more work, but that was mitigated by a simple requirement,
any executable using libisc and libdns, must include <isc/lib.h> and
<dns/lib.h> respectively (in this particular order). In turn, these two
headers must not be included from within any library as they contain
inlined functions marked with constructor/destructor attributes.
This commit adds support for setting SNI hostnames in outgoing
connections over TLS.
Most of the changes are related to either adapting the code to accept
and extra argument in *connect() functions and a couple of changes to
the TLS Stream to actually make use of the new SNI hostname
information.
isc_loop() can now take its place.
This also requires changes to the test harness - instead of running the
setup and teardown outside of th main loop, we now schedule the setup
and teardown to run on the loop (via isc_loop_setup() and
isc_loop_teardown()) - this is needed because the new the isc_loop()
call has to be run on the active event loop, but previously the
isc_loop_current() (and the variants like isc_loop_main()) would work
even outside of the loop because it needed just isc_tid() to work, but
not the full loop (which was mainly true for the main thread).
Development versions of cmocka require the intmax_t and uintmax_t types
to be defined by the time the test code includes the <cmocka.h> header.
These types are defined in the <stdint.h> header, which is included by
the <inttypes.h> header, which in turn is already explicitly included by
some of the programs in the tests/ directory. Ensure all programs in
that directory that include the <cmocka.h> header also include the
<inttypes.h> header to future-proof the code while keeping the change
set minimal and the resulting code consistent. Also prevent explicitly
including the <stdint.h> header in those programs as it is included by
the <inttypes.h> header.
When shutting down TCP sockets, the read callback calling logic was
flawed, it would call either one less callback or one extra. Fix the
logic in the way:
1. When isc_nm_read() has been called but isc_nm_read_stop() hasn't on
the handle, the read callback will be called with ISC_R_CANCELED to
cancel active reading from the socket/handle.
2. When isc_nm_read() has been called and isc_nm_read_stop() has been
called on the on the handle, the read callback will be called with
ISC_R_SHUTTINGDOWN to signal that the dormant (not-reading) socket
is being shut down.
3. The .reading and .recv_read flags are little bit tricky. The
.reading flag indicates if the outer layer is reading the data (that
would be uv_tcp_t for TCP and isc_nmsocket_t (TCP) for TLSStream),
the .recv_read flag indicates whether somebody is interested in the
data read from the socket.
Usually, you would expect that the .reading should be false when
.recv_read is false, but it gets even more tricky with TLSStream as
the TLS protocol might need to read from the socket even when sending
data.
Fix the usage of the .recv_read and .reading flags in the TLSStream
to their true meaning - which mostly consist of using .recv_read
everywhere and then wrapping isc_nm_read() and isc_nm_read_stop()
with the .reading flag.
4. The TLS failed read helper has been modified to resemble the TCP code
as much as possible, clearing and re-setting the .recv_read flag in
the TCP timeout code has been fixed and .recv_read is now cleared
when isc_nm_read_stop() has been called on the streaming socket.
5. The use of Network Manager in the named_controlconf, isccc_ccmsg, and
isc_httpd units have been greatly simplified due to the improved design.
6. More unit tests for TCP and TLS testing the shutdown conditions have
been added.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Artem Boldariev <artem@isc.org>
OpenSSL 3.1.0 uses __attribute__(malloc), conflicting with a redefined
malloc in cmocka.h.
As a workaround, include an OpenSSL header file before including
cmocka.h in the unit tests where OpenSSL is used.
Instead of marking the unused entities with UNUSED(x) macro in the
function body, use a `ISC_ATTR_UNUSED` attribute macro that expans to
C23 [[maybe_unused]] or __attribute__((__unused__)) as fallback.
Previously, isc_job_run() could have been used to run the job on the
current loop and the isc_job_run() would take care of allocating and
deallocating the job. After the change in this MR, the isc_job_run()
is more complicated to use, so we introduce the isc_async_current()
macro to suplement isc_async_run() when we need to run the job on the
current loop.
This commit modifies the existing unit tests for TLS DNS and TCP DNS
in such a way that the new Stream DNS transport is used as it is
intended to be a drop-in replacement for these two transports.
After the loop manager refactoring TCP DNS and TLS DNS unit tests
ended up broken.
The problem is that in these unit tests the code is written in such a
way that for establishing a new connection tcpdns_connect() and
tlsdns_connect() functions are used. However, in these tests as a
connection callback function connect_connect_cb() is used. The
function logic is responsible for determining the function for
establishing subsequent connection.
To do so, it called get_stream_connect_function() ... which can return
only tcp_connect() or tls_connect(), not tcpdns_connect() or
tlsdns_connect(). That is definitely *not* what was implied.
All this time the unit tests were testing something, but now what was
intended.
This commit fixes the problem by passing the tcpdns_connect() and
tlsdns_connect() function pointers to connect_connect_cb().
In rare circumstances, the UDP port for the listening socket and the UDP
port for the connecting socket might be the same. Because we use the
"reuse" port socket option, this isn't caught when binding the socket,
and thus the connected client socket could send a datagram to itself,
completely bypassing the server. This doesn't happen under normal
operation mode because `named` is listening on a privileged port (53),
and even if not, it doesn't usually talk to itself as the tests do.
Pick an arbitrary port for listening (9153-9156) that is outside the
ephemeral port range for the network manager related unit tests (except
the `doh_test).
The netmgr_test unit test has been subdivided into tcp_test,
tcpdns_test, tls_test, tlsdns_test, and udp_test components.
These have been updated to use the new loopmgr.
