Allow larger TTL values in zones that go insecure. This is necessary
because otherwise the zone will not be loaded due to the max-zone-ttl
of P1D that is part of the current insecure policy.
In the keymgr.c code, default back to P1D if the max-zone-ttl is set
to zero.
Add an option to enable/disable inline-signing inside the
dnssec-policy clause. The existing inline-signing option that is
set in the zone clause takes priority, but if it is omitted, then the
value that is set in dnssec-policy is taken.
The built-in policies use inline-signing.
This means that if you want to use the default policy without
inline-signing you either have to set it explicitly in the zone
clause:
zone "example" {
...
dnssec-policy default;
inline-signing no;
};
Or create a new policy, only overriding the inline-signing option:
dnssec-policy "default-dynamic" {
inline-signing no;
};
zone "example" {
...
dnssec-policy default-dynamic;
};
This also means that if you are going insecure with a dynamic zone,
the built-in "insecure" policy needs to be accompanied with
"inline-signing no;".
These two configuration options worked in conjunction with 'auto-dnssec'
to determine KSK usage, and thus are now obsoleted.
However, in the code we keep KSK processing so that when a zone is
reconfigured from using 'dnssec-policy' immediately to 'none' (without
going through 'insecure'), the zone is not immediately made bogus.
Add one more test case for going straight to none, now with a dynamic
zone (no inline-signing).
the prior practice of passing a dns_name containing the
expanded name of an algorithm to dns_tsigkey_create() and
dns_tsigkey_createfromkey() is unnecessarily cumbersome;
we can now pass the algorithm number instead.
for testing purposes, we need to be able to specify a library path from
which to load the dnsrps implementation. this can now be done with the
"dnsrps-library" option.
DNSRPS can now be enabled in configure regardless of whether librpz.so
is currently installed on the system.
Completely remove the TKEY Mode 2 (Diffie-Hellman Exchanged Keying) from
BIND 9 (from named, named.conf and all the tools). The TKEY usage is
fringe at best and in all known cases, GSSAPI is being used as it should.
The draft-eastlake-dnsop-rfc2930bis-tkey specifies that:
4.2 Diffie-Hellman Exchanged Keying (Deprecated)
The use of this mode (#2) is NOT RECOMMENDED for the following two
reasons but the specification is still included in Appendix A in case
an implementation is needed for compatibility with old TKEY
implementations. See Section 4.6 on ECDH Exchanged Keying.
The mixing function used does not meet current cryptographic
standards because it uses MD5 [RFC6151].
RSA keys must be excessively long to achieve levels of security
required by current standards.
We might optionally implement Elliptic Curve Diffie-Hellman (ECDH) key
exchange mode 6 if the draft ever reaches the RFC status. Meanwhile the
insecure DH mode needs to be removed.
- removed documentation of -S option from named man page
- removed documentation of reserved-sockets from ARM
- simplified documentation of dnssec-secure-to-insecure - it
now just says it's obsolete rather than describing what it
doesn't do anymore
- marked three formerly obsolete options as ancient:
parent-registration-delay, reserved-sockets, and
suppress-initial-notify
the built-in trust anchors in named and delv are sufficent for
validation. named still needs to be able to load trust anchors from
a bind.keys file for testing purposes, but it doesn't need to be
the default behavior.
we now only load trust anchors from a file if explicitly specified
via the "bindkeys-file" option in named or the "-a" command line
argument to delv. documentation has been cleaned up to remove references
to /etc/bind.keys.
Closes#3850.
DSCP has not been fully working since the network manager was
introduced in 9.16, and has been completely broken since 9.18.
This seems to have caused very few difficulties for anyone,
so we have now marked it as obsolete and removed the
implementation.
To ensure that old config files don't fail, the code to parse
dscp key-value pairs is still present, but a warning is logged
that the feature is obsolete and should not be used. Nothing is
done with configured values, and there is no longer any
range checking.
Remove parsing the configuration options 'alt-transfer-source',
'alt-transfer-source-v6', and 'use-alt-transfer-source', and remove
the corresponding code that implements the feature.
After deprecating the operating system limits settings (coresize,
datasize, files and stacksize), mark them as ancient and remove the code
that sets the values from config.
There are three levels there for the port value, with increasing
priority:
1. The default ports, defined by 'port' and 'tls-port' config options.
2. The primaries-level default port: primaries port <number> { ... };
3. The primaries element-level port: primaries { <address> port
<number>; ... };"
In 'named_config_getipandkeylist()', the 'def_port' and 'def_tlsport'
variables are extracted from level 1. The 'port' variable is extracted
from the level 2. Currently if that is unset, it defaults to the
default port ('def_port' or 'def_tlsport' depending on the transport
used), but overrides the level 2 port setting for the next primaries in
the list.
Update the code such that we inherit the port only if the level 3 port
is not set, and inherit from the default ports if the level 2 port is
also not set.
While refactoring the isc_mem_getx(...) usage, couple places were
identified where the memory was resized manually. Use the
isc_mem_reget(...) that was introduced in [GL !5440] to resize the
arrays via function rather than a custom code.
Add new semantic patch to replace the straightfoward uses of:
ptr = isc_mem_{get,allocate}(..., size);
memset(ptr, 0, size);
with the new API call:
ptr = isc_mem_{get,allocate}x(..., size, ISC_MEM_ZERO);
The "glue-cache" option was marked as deprecated by commit
5ae33351f286feb25a965bf3c9e6b122ab495342 (first released in BIND 9.17.6,
back in October 2020), so now obsolete that option, removing all code
and documentation related to it.
Note: this causes the glue cache feature to be permanently enabled, not
disabled.
Remove the duplication from the defaultconf and inherit the values
not set in the "insecure" policy from the "default" policy. Therefore,
we must insist that the first read built-in policy is the default one.
Update the defaultconf with the built-in policies. These will now be
printed with "named -C".
Change the defines in kasp.h to be strings, so they can be concatenated
in the defaultconf. This means when creating a kasp structure, we no
longer initialize the defaults (this is fine because only kaspconf.c
uses dns_kasp_create() and it inherits from the default policy).
In kaspconf.c, the default values now need to be parsed from string.
Introduce some variables so we don't need to do get_duration multiple
times on the same configuration option.
Finally, clang-format-14 decided to do some random formatting changes.
The named_config_getdefault() was missing void in the function
definition. This broke clang-15 that didn't match the declaration that
had the void in the argument with the definition that hadn't.
It might be useful to display built-in configuration with all its
values. It should make it easier to test what default values has changed
in a new release.
Related: #1326
After some back and forth, it was decidede to match the configuration
option with unbound ("so-reuseport"), PowerDNS ("reuseport") and/or
nginx ("reuseport").
Previously, HAVE_SO_REUSEPORT_LB has been defined only in the private
netmgr-int.h header file, making the configuration of load balanced
sockets inoperable.
Move the missing HAVE_SO_REUSEPORT_LB define the isc/netmgr.h and add
missing isc_nm_getloadbalancesockets() implementation.
Previously, the option to enable kernel load balancing of the sockets
was always enabled when supported by the operating system (SO_REUSEPORT
on Linux and SO_REUSEPORT_LB on FreeBSD).
It was reported that in scenarios where the networking threads are also
responsible for processing long-running tasks (like RPZ processing, CATZ
processing or large zone transfers), this could lead to intermitten
brownouts for some clients, because the thread assigned by the operating
system might be busy. In such scenarious, the overall performance would
be better served by threads competing over the sockets because the idle
threads can pick up the incoming traffic.
Add new configuration option (`load-balance-sockets`) to allow enabling
or disabling the load balancing of the sockets.
Previously, the unreachable code paths would have to be tagged with:
INSIST(0);
ISC_UNREACHABLE();
There was also older parts of the code that used comment annotation:
/* NOTREACHED */
Unify the handling of unreachable code paths to just use:
UNREACHABLE();
The UNREACHABLE() macro now asserts when reached and also uses
__builtin_unreachable(); when such builtin is available in the compiler.
The keep-response-order option has been introduced when TCP pipelining
has been introduced to BIND 9 as a failsafe for possibly non-compliant
clients.
Declare the keep-response-order obsolete as all DNS clients should
either support out-of-order processing or don't send more DNS queries
until the DNS response for the previous one has been received.
This commit converts the license handling to adhere to the REUSE
specification. It specifically:
1. Adds used licnses to LICENSES/ directory
2. Add "isc" template for adding the copyright boilerplate
3. Changes all source files to include copyright and SPDX license
header, this includes all the C sources, documentation, zone files,
configuration files. There are notes in the doc/dev/copyrights file
on how to add correct headers to the new files.
4. Handle the rest that can't be modified via .reuse/dep5 file. The
binary (or otherwise unmodifiable) files could have license places
next to them in <foo>.license file, but this would lead to cluttered
repository and most of the files handled in the .reuse/dep5 file are
system test files.
A number of DNS implementation produce NSEC records with bad type
maps that don't contain types that exist at the name leading to
NODATA responses being synthesize instead of the records in the
zone. NSEC records with these bad type maps often have the NSEC
NSEC field set to '\000.QNAME'. We look for the first label of
this pattern.
e.g.
example.com NSEC \000.example.com SOA NS NSEC RRSIG
example.com RRRSIG NSEC ...
example.com SOA ...
example.com RRRSIG SOA ...
example.com NS ...
example.com RRRSIG NS ...
example.com A ...
example.com RRRSIG A ...
A is missing from the type map.
This introduces a temporary option 'reject-000-label' to control
this behaviour.
The lame-ttl cache is implemented in ADB as per-server locked
linked-list "indexed" with <qname,qtype>. This list has to be walked
every time there's a new query or new record added into the lame cache.
Determined attacker can use this to degrade performance of the resolver.
Resolver testing has shown that disabling the lame cache has little
impact on the resolver performance and it's a minimal viable defense
against this kind of attack.
check for type "master" / "slave" at the same time as checking
for "primary" / "secondary" as we step through the maps.
Checking "primary" then "master" or "master" then "primary" does
not work as the synomym is not checked for to stop the search.
Similarly with "secondary" and "slave".
The native PKCS#11 support has been removed in favour of better
maintained, more performance and easier to use OpenSSL PKCS#11 engine
from the OpenSC project.
