Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
This commit adds stub parser support and tests for:
- "tls" statement, specifying key and cert.
- an optional "tls" keyvalue in listen-on statements for DoT
configuration.
Documentation for these options has also been added to the ARM, but
needs further work.
Add a +burst option to mdig so that we have a second to setup the
mdig calls then they run at the start of the next second.
RRL uses 'queries in a second' as a approximation to
'queries per second'. Getting the bursts of traffic to all happen in
the same second should prevent false negatives in the system test.
We now have a second to setup the traffic in. Then the traffic should
be sent at the start of the next second. If that still fails we
should move to +burst=<now+2> (further extend mdig) instead of the
implicit <now+1> as the trigger second.
This command is similar in arguments as -checkds so refactor the
'named_server_dnssec' function accordingly. The only difference
are that:
- It does not take a "publish" or "withdrawn" argument.
- It requires the key id to be set (add a check to make sure).
Add tests that will trigger rollover immediately and one that
schedules a test in the future.
The handling of . (dot) characted at the beginning of the line has
changed between the sphinx-doc versions, and it was constantly giving us
trouble when generating man pages when using different sphinx-doc. This
commit just changes the source rst file, so there's no more . (dot) the
beginning of the line.
No issues with the glue cache feature have been reported since its
introduction in BIND 9.12. As the rationale for introducing the
"glue-cache" option was to have a safety switch readily available in
case the glue cache turns out to cause problems, it is time to deprecate
the option. Glue cache will be permanently enabled in a future release,
at which point the "glue-cache" option will be made obsolete.
Add two more arguments to the dnssec-settime tool. '-P ds' sets the
time that the DS was published in the parent, '-D ds' sets the time
that the DS was removed from the parent (these times are not accurate,
but rely on the user to use them appropriately, and as long as the
time is not before actual publication/withdrawal, it is fine).
These new arguments are needed for the kasp system test. We want to
test when the next key event is once a DS is published, and now
that 'parent-registration-delay' is obsoleted, we need a different
approach to reliable test the timings.
Hold a weak reference to the view so that it can't go away while
nta is performing its lookups. Cancel nta timers once all external
references to the view have gone to prevent them triggering new work.
Add a new 'rndc' command 'dnssec -checkds' that allows the user to
signal named that a new DS record has been seen published in the
parent, or that an existing DS record has been withdrawn from the
parent.
Upon the 'checkds' request, 'named' will write out the new state for
the key, updating the 'DSPublish' or 'DSRemoved' timing metadata.
This replaces the "parent-registration-delay" configuration option,
this was unreliable because it was purely time based (if the user
did not actually submit the new DS to the parent for example, this
could result in an invalid DNSSEC state).
Because we cannot rely on the parent registration delay for state
transition, we need to replace it with a different guard. Instead,
if a key wants its DS state to be moved to RUMOURED, the "DSPublish"
time must be set and must not be in the future. If a key wants its
DS state to be moved to UNRETENTIVE, the "DSRemoved" time must be set
and must not be in the future.
By default, with '-checkds' you set the time that the DS has been
published or withdrawn to now, but you can set a different time with
'-when'. If there is only one KSK for the zone, that key has its
DS state moved to RUMOURED. If there are multiple keys for the zone,
specify the right key with '-key'.
The current serve-stale implementation in BIND 9 stores all received
records in the cache for a max-stale-ttl interval (default 12 hours).
This allows DNS operators to turn the serve-stale answers in an event of
large authoritative DNS outage. The caching of the stale answers needs
to be enabled before the outage happens or the feature would be
otherwise useless.
The negative consequence of the default setting is the inevitable
cache-bloat that happens for every and each DNS operator running named.
In this MR, a new configuration option `stale-cache-enable` is
introduced that allows the operators to selectively enable or disable
the serve-stale feature of BIND 9 based on their decision.
The newly introduced option has been disabled by default,
e.g. serve-stale is disabled in the default configuration and has to be
enabled if required.
- updated libisccc to use netmgr events
- updated rndc to use isc_nm_tcpconnect() to establish connections
- updated control channel to use isc_nm_listentcp()
open issues:
- the control channel timeout was previously 60 seconds, but it is now
overridden by the TCP idle timeout setting, which defaults to 30
seconds. we should add a function that sets the timeout value for
a specific listener socket, instead of always using the global value
set in the netmgr. (for the moment, since 30 seconds is a reasonable
timeout for the control channel, I'm not prioritizing this.)
- the netmgr currently has no support for UNIX-domain sockets; until
this is addressed, it will not be possible to configure rndc to use
them. we will need to either fix this or document the change in
behavior.
There were some missing bits in the other rst files and Makefile.am(s)
that didn't reflect the rename of the main document. Also add
ddns-confgen.8 manpage.
it is now an error to have two primaries lists with the same
name. this is true regardless of whether the "primaries" or
"masters" keywords were used to define them.
Add the code and documentation required to provide DNSSEC signing
status through rndc. This does not yet show any useful information,
just provide the command that will output some dummy string.
Similarly, the manpage sources will get rebuild only when in maintainer
mode because they require sphinx-build to be available locally and that
might not be always the case.
Make various adjustments necessary to enable "make dist" to build a BIND
source tarball whose contents are complete enough to build binaries, run
unit & system tests, and generate documentation on Unix systems.
Known outstanding issues:
- "make distcheck" does not work yet.
- Tests do not work for out-of-tree source-tarball-based builds.
- Source tarballs are not complete enough for building on Windows.
All of the above will be addressed in due course.
Move BIND binaries which are neither daemons nor administrative programs
to $bindir. This results in only the following binaries being left in
$sbindir:
- ddns-confgen
- named
- rndc
- rndc-confgen
- tsig-confgen
The ARM and the manpages have been converted into Sphinx documentation
format.
Sphinx uses reStructuredText as its markup language, and many of its
strengths come from the power and straightforwardness of
reStructuredText and its parsing and translating suite, the Docutils.
