Since the queries sent towards root and TLD servers are now included in
the count (as a result of the fix for CVE-2020-8616),
"max-recursion-queries" has a higher chance of being exceeded by
non-attack queries. Increase its default value from 75 to 100.
Fallback to TCP when we have already seen a DNS COOKIE response
from the given address and don't have one in this UDP response. This
could be a server that has turned off DNS COOKIE support, a
misconfigured anycast server with partial DNS COOKIE support, or a
spoofed response. Falling back to TCP is the correct behaviour in
all 3 cases.
Return value of dns_db_getservestalerefresh() and
dns_db_getservestalettl() functions were previously unhandled.
This commit purposefully ignore those return values since there is
no side effect if those results are != ISC_R_SUCCESS, it also supress
Coverity warnings.
Make sure pointer checks in unit tests use cmocka assertion macros
dedicated for use with pointers instead of those dedicated for use with
integers or booleans.
Add unit test to ensure the right NSEC3PARAM event is scheduled in
'dns_zone_setnsec3param()'. To avoid scheduling and managing actual
tasks, split up the 'dns_zone_setnsec3param()' function in two parts:
1. 'dns__zone_lookup_nsec3param()' that will check if the requested
NSEC3 parameters already exist, and if a new salt needs to be
generated.
2. The actual scheduling of the new NSEC3PARAM event (if needed).
When generating a new salt, compare it with the previous NSEC3
paremeters to ensure the new parameters are different from the
previous ones.
This moves the salt generation call from 'bin/named/*.s' to
'lib/dns/zone.c'. When setting new NSEC3 parameters, you can set a new
function parameter 'resalt' to enforce a new salt to be generated. A
new salt will also be generated if 'salt' is set to NULL.
Logging salt with zone context can now be done with 'dnssec_log',
removing the need for 'dns_nsec3_log_salt'.
Upon request from Mark, change the configuration of salt to salt
length.
Introduce a new function 'dns_zone_checknsec3aram' that can be used
upon reconfiguration to check if the existing NSEC3 parameters are
in sync with the configuration. If a salt is used that matches the
configured salt length, don't change the NSEC3 parameters.
Check 'nsec3param' configuration for the number of iterations. The
maximum number of iterations that are allowed are based on the key
size (see https://tools.ietf.org/html/rfc5155#section-10.3).
Check 'nsec3param' configuration for correct salt. If the string is
not "-" or hex-based, this is a bad salt.
Implement support for NSEC3 in dnssec-policy. Store the configuration
in kasp objects. When configuring a zone, call 'dns_zone_setnsec3param'
to queue an nsec3param event. This will ensure that any previous
chains will be removed and a chain according to the dnssec-policy is
created.
Add tests for dnssec-policy zones that uses the new 'nsec3param'
option, as well as changing to new values, changing to NSEC, and
changing from NSEC.
cppcheck 2.2 reports the following false positive:
lib/isc/tests/quota_test.c:71:21: error: Array 'quotas[101]' accessed at index 110, which is out of bounds. [arrayIndexOutOfBounds]
isc_quota_t *quotas[110];
^
The above is not even an array access, so this report is obviously
caused by a cppcheck bug. Yet, it seems to be triggered by the presence
of the add_quota() macro, which should really be a function. Convert
the add_quota() macro to a function in order to make the code cleaner
and to prevent the above cppcheck 2.2 false positive from being
triggered.
cppcheck 2.2 reports the following false positive:
lib/dns/dispatch.c:1239:14: warning: Either the condition 'resp==NULL' is redundant or there is possible null pointer dereference: resp. [nullPointerRedundantCheck]
if (disp != resp->disp) {
^
lib/dns/dispatch.c:1210:11: note: Assuming that condition 'resp==NULL' is not redundant
if (resp == NULL) {
^
lib/dns/dispatch.c:1239:14: note: Null pointer dereference
if (disp != resp->disp) {
^
Apparently this version of cppcheck gets confused about conditional
"goto" statements because line 1239 can never be reached if 'resp' is
NULL.
Move a code block to prevent the above false positive from being
reported without affecting the processing logic.
previously query plugins were strictly synchrounous - the query
process would be interrupted at some point, data would be looked
up or a change would be made, and then the query processing would
resume immediately.
this commit enables query plugins to initiate asynchronous processes
and resume on a completion event, as with recursion.
several small changes to query processing to make it easier to
use hook-based recursion (and other asynchronous functionlity)
later.
- recursion quota check is now a separate function,
check_recursionquota(), which is called by ns_query_recurse().
- pass isc_result to query_nxdomain() instead of bool.
the value of 'empty_wild' will be determined in the function
based on the passed result. this is similar to query_nodata(),
and makes the signatures of the two functions more consistent.
- pass the current 'result' value into plugin hooks.
When calling the high level netmgr functions, the callback would be
sometimes called synchronously if we catch the failure directly, or
asynchronously if it happens later. The synchronous call to the
callback could create deadlocks as the caller would not expect the
failed callback to be executed directly.
RFC 8767 recommends that attempts to refresh to be done no more
frequently than every 30 seconds.
Added check into named-checkconf, which will warn if values below the
default are found in configuration.
BIND will also log the warning during loading of configuration in the
same fashion.
Before this update, BIND would attempt to do a full recursive resolution
process for each query received if the requested rrset had its ttl
expired. If the resolution fails for any reason, only then BIND would
check for stale rrset in cache (if 'stale-cache-enable' and
'stale-answer-enable' is on).
The problem with this approach is that if an authoritative server is
unreachable or is failing to respond, it is very unlikely that the
problem will be fixed in the next seconds.
A better approach to improve performance in those cases, is to mark the
moment in which a resolution failed, and if new queries arrive for that
same rrset, try to respond directly from the stale cache, and do that
for a window of time configured via 'stale-refresh-time'.
Only when this interval expires we then try to do a normal refresh of
the rrset.
The logic behind this commit is as following:
- In query.c / query_gotanswer(), if the test of 'result' variable falls
to the default case, an error is assumed to have happened, and a call
to 'query_usestale()' is made to check if serving of stale rrset is
enabled in configuration.
- If serving of stale answers is enabled, a flag will be turned on in
the query context to look for stale records:
query.c:6839
qctx->client->query.dboptions |= DNS_DBFIND_STALEOK;
- A call to query_lookup() will be made again, inside it a call to
'dns_db_findext()' is made, which in turn will invoke rbdb.c /
cache_find().
- In rbtdb.c / cache_find() the important bits of this change is the
call to 'check_stale_header()', which is a function that yields true
if we should skip the stale entry, or false if we should consider it.
- In check_stale_header() we now check if the DNS_DBFIND_STALEOK option
is set, if that is the case we know that this new search for stale
records was made due to a failure in a normal resolution, so we keep
track of the time in which the failured occured in rbtdb.c:4559:
header->last_refresh_fail_ts = search->now;
- In check_stale_header(), if DNS_DBFIND_STALEOK is not set, then we
know this is a normal lookup, if the record is stale and the query
time is between last failure time + stale-refresh-time window, then
we return false so cache_find() knows it can consider this stale
rrset entry to return as a response.
The last additions are two new methods to the database interface:
- setservestale_refresh
- getservestale_refresh
Those were added so rbtdb can be aware of the value set in configuration
option, since in that level we have no access to the view object.
This commit adds couple of additional safeguards against running
sends/reads on inactive sockets. The changes was modeled after the
changes we made to netmgr/tcpdns.c
Parse the configuration of tls objects into SSL_CTX* objects. Listen on
DoT if 'tls' option is setup in listen-on directive. Use DoT/DoH ports
for DoT/DoH.
This commit adds stub parser support and tests for:
- "tls" statement, specifying key and cert.
- an optional "tls" keyvalue in listen-on statements for DoT
configuration.
Documentation for these options has also been added to the ARM, but
needs further work.
Add server-side TLS support to netmgr - that includes moving some of the
isc_nm_ functions from tcp.c to a wrapper in netmgr.c calling a proper
tcp or tls function, and a new isc_nm_listentls() function.
Add DoT support to tcpdns - isc_nm_listentlsdns().
there were two failures during observed in testing, both occurring
when 'rndc halt' was run rather than 'rndc stop' - the latter dumps
zone contents to disk and presumably introduced enough delay to
prevent the races:
- a failure when the zone was shut down and called dns_xfrin_detach()
before the xfrin had finished connecting; the connect timeout
terminated without detaching its handle
- a failure when the tcpdns socket timer fired after the outerhandle
had already been cleared.
this commit incidentally addresses a failure observed in mutexatomic
due to a variable having been initialized incorrectly.
This commit extends the perl Configure script to also check for libssl
in addition to libcrypto and change the vcxproj source files to link
with both libcrypto and libssl.
Previously, the xfrin object relied on four different reference counters
(`refs`, `connects`, `sends`, `recvs`) and destroyed the xfrin object
only if all of them were zero. This commit reduces the reference
counting only to the `references` (renamed from `refs`) counter. We
keep the existing `connects`, `sends` and `recvs` as safe guards, but
they are not formally needed.
since the network manager is now handling timeouts, xfrin doesn't
need an isc_task object.
it may be necessary to revert this later if we find that it's
important for zone_xfrdone() to be executed in the zone task context.
currently things seem to be working well without that, though.
socket() call can return an error - e.g. EMFILE, so we need to handle
this nicely and not crash.
Additionally wrap the socket() call inside a platform independent helper
function as the Socket data type on Windows is unsigned integer:
> This means, for example, that checking for errors when the socket and
> accept functions return should not be done by comparing the return
> value with –1, or seeing if the value is negative (both common and
> legal approaches in UNIX). Instead, an application should use the
> manifest constant INVALID_SOCKET as defined in the Winsock2.h header
> file.
Because we use result earlier for setting the loadbalancing on the
socket, we could be left with a ISC_R_NOTIMPLEMENTED value stored in the
variable and when the UDP connection would succeed, we would
errorneously return this value instead of ISC_R_SUCCESS.
