when searching a DNSKEY or KEY rrset for the key that matches
a particular algorithm and ID, it's a waste of time to convert
every key into a dst_key object; it's faster to compute the key
ID by checksumming the region, and then only do the full key
conversion once we know we've found the correct key.
this optimization was already in use in the validator, but it's
been refactored for code clarity, and is now also used in query.c
and message.c.
The fetch context that held these values could be freed while there
were still active pointers to the memory. Using a reference counted
pointer avoids this.
Extended DNS Error messages EDE 7 (expired key) and EDE 8 (validity
period of the key not yet started) are now sent in case of such DNSSEC
validation failures.
Refactor the existing validator extended error APIs in order to make it
easy to have a consisdent extra info (with domain/type) in the various
use case (i.e. when the EDE depends on validator state,
validate_extendederror or when the EDE doesn't depend of any state but
can be called directly in a specific flow).
the target buffer passed to dns_name_concatenate() was never
used (except for one place in dig, where it wasn't actually
needed, and has already been removed in a prior commit).
we can safely remove the parameter.
There was just a single use of passing an extra buffer to
dns_name_downcase() which have been replaced by simple call to
isc_ascii_lowercase() and the 'target' argument from dns_name_downcase()
function has been removed.
If a deferred validation on data that was originally queried with
CD=1 fails, we now repeat the query, since the zone data may have
changed in the meantime.
When a query is made with CD=1, we store the result in the
cache marked pending so that it can be validated later, at
which time it will either be accepted as an answer or removed
from the cache as invalid. Deferred validation was not
attempted when there were no cached RRSIGs for DNSKEY and
DS. We now complete the deferred validation in this scenario.
Instead of mixing the dns_resolver and dns_validator units directly with
the EDE code, split-out the dns_ede functionality into own separate
compilation unit and hide the implementation details behind abstraction.
Additionally, the EDE codes are directly copied into the ns_client
buffers by passing the EDE context to dns_resolver_createfetch().
This makes the dns_ede implementation simpler to use, although sligtly
more complicated on the inside.
Co-authored-by: Colin Vidal <colin@isc.org>
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Add support for EDE codes 1 (Unsupported DNSKEY Algorithm) and 2
(Unsupported DS Digest Type) which might occurs during DNSSEC
validation in case of unsupported DNSKEY algorithm or DS digest type.
Because DNSSEC internally kicks off various fetches, we need to copy
all encountered extended errors from fetch responses to the fetch
context. Upon an event, the errors from the fetch context are copied
to the client response.
The DNS_R_MUSTBESECURE lost its meaning with removal of
dnssec-must-be-secure option, so replace the few remaining (and a bit
confusing) use of this result code with DNS_R_NOVALIDSIG.
The dnssec-must-be-secure feature was added in the early days of BIND 9
and DNSSEC and it makes sense only as a debugging feature. There are no
reasons to keep this feature in the production code anymore.
Remove the feature to simplify the code.
Commit af7db8951364a89c468eda1535efb3f53adc2c1f as part of #4141 was
supposed to apply the 'max-recursion-queries' quota to validator
queries, but the counter was never actually passed on to
dns_resolver_createfetch(). This has been fixed, and the global query
counter ('max-query-count', per client request) is now also added.
Add support for Extended DNS Errors (EDE) error 22: No reachable
authority. This occurs when after a timeout delay when the resolver is
trying to query an authority server.
The lame-ttl processing was overriden to be disabled in the config,
but the code related to the lame-ttl was still kept in the resolver
code. More importantly, the DNS_RESOLVER_BADCACHETTL() macro would
cause the entries in the resolver badcache to be always cached for at
least 30 seconds even if the lame-ttl would be set to 0.
Remove the dns_badcache code from the dns_resolver unit, so we save some
processing time and memory in the resolver code.
There was a data race dns_validator_cancel() was called when the
offloaded operations were in progress. Make dns_validator_cancel()
respect the data ownership and only set new .shuttingdown variable when
the offloaded operations are in progress. The cancel operation would
then finish when the offloaded work passes the ownership back to the
respective thread.
Currently, the isc_work API is overloaded. It runs both the
CPU-intensive operations like DNSSEC validations and long-term tasks
like RPZ processing, CATZ processing, zone file loading/dumping and few
others.
Under specific circumstances, when many large zones are being loaded, or
RPZ zones processed, this stops the CPU-intensive tasks and the DNSSEC
validation is practically stopped until the long-running tasks are
finished.
As this is undesireable, this commit moves the CPU-intensive operations
from the isc_work API to the isc_helper API that only runs fast memory
cleanups now.
When a validator is already shut down, val->name becomes NULL. We
need to process and keep the ISC_R_CANCELED or ISC_R_SHUTTINGDOWN
result code before calling validate_async_done(), otherwise, when it
is called with the hardcoded DNS_R_NOVALIDSIG result code, it can
cause an assetion failure when val->name (being NULL) is used in
proveunsecure().
Remove the complicated mechanism that could be (in theory) used by
external libraries to register new categories and modules with
statically defined lists in <isc/log.h>. This is similar to what we
have done for <isc/result.h> result codes. All the libraries are now
internal to BIND 9, so we don't need to provide a mechanism to register
extra categories and modules.
Since the dns_validator_destroy() function doesn't guarantee that
it destroys the validator, rename it to dns_validator_shutdown()
and require explicit dns_validator_detach() to follow.
Enforce the documented function requirement that the validator must
be completed when the function is called.
Make sure to set val->name to NULL when the function is called,
so that the owner of the validator may destroy the name, even if
the validator is not destroyed immediately. This should be safe,
because the name can be used further only for logging by the
offloaded work callbacks when they detect that the validator is
already canceled/complete, and the logging function has a condition
to use the name only when it is non-NULL.
If val->result is not ISC_R_SUCCESS, a similar message is logged
further down in the function. Remove the redundant log message.
Also remove an unnecessary code comment line.
When there is a secure chain of trust with a KSK that is not actively
signing the DNSKEY RRset, the code for validating the DNSKEY RRset
against the DS RRset could potentially skip DS records, thinking the
chain of trust is broken while there is a valid DS with corresponding
DNSKEY record present.
This is because we pass the result ISC_R_NOMORE on when we are done
checking for signatures, but then treat it as "no more DS records".
Chaning the return value to something else (DNS_R_NOVALIDSIG seems the
most appropriate here) fixes the issue.
Instead of running all the cryptographic validation in a tight loop,
spread it out into multiple event loop "ticks", but moving every single
validation into own isc_async_run() asynchronous event. Move the
cryptographic operations - both verification and DNSKEY selection - to
the offloaded threads (isc_work_enqueue), this further limits the time
we spend doing expensive operations on the event loops that should be
fast.
Limit the impact of invalid or malicious RRSets that contain crafted
records causing the dns_validator to do many validations per single
fetch by adding a cap on the maximum number of validations and maximum
number of validation failures that can happen before the resolving
fails.
With shared name memory pools (f5af981831ea8a707090c1b09a47c25b75d86b5a)
the message needs to be destroyed before the view is detached which
in turn detaches the resolver which checks that all resources have
been returned.
The dns_badcache unit had (yet another) own locked hashtable
implementation. Replace the hashtable used by dns_badcache with
lock-free cds_lfht implementation from liburcu.
When create_fetch() in the dns_validator unit detects deadlock, it
returns DNS_R_NOVALIDSIG, but it didn't attach to the validator. The
other condition to returning result != ISC_R_SUCCESS would be error from
dns_resolver_createfetch(). The caller (in two places out of three)
would detect the error condition and always detach from the validator.
Move the dns_validator_detach() on dns_resolver_createfetch() error
condition to create_fetch() function and cleanup the extra detaches in
seek_dnskey() and get_dsset().
In selfsigned_dnskey only call dns_dnssec_verify if the signature's
key id matches a revoked key, the trust is pending and the key
matches a trust anchor. Previously named was calling dns_dnssec_verify
unconditionally resulted in busy work.
The isc_time_now() and isc_time_now_hires() were used inconsistently
through the code - either with status check, or without status check,
or via TIME_NOW() macro with RUNTIME_CHECK() on failure.
Refactor the isc_time_now() and isc_time_now_hires() to always fail when
getting current time has failed, and return the isc_time_t value as
return value instead of passing the pointer to result in the argument.
This is a simple replacement using the semantic patch from the previous
commit and as added bonus, one removal of previously undetected unused
variable in named/server.c.
Change the isc_job_run() to not-make any allocations. The caller must
make sure that it allocates isc_job_t - usually as part of the argument
passed to the callback.
For simple jobs, using isc_async_run() is advised as it allocates its
own separate isc_job_t.
as every validator function is loop-synchronized, it should no longer be
necessary to use a validator lock.
calling dns_validator_send(), dns_validator_cancel() or
dns_validator_destroy() from a thread other than the one on which the
validator is running will now cause an assertion failure; this should be
fine since the validator and resolver are tightly coupled, and the fetch
contexts and validators run in the same loops.
refactor validator so that the validation status object (previously
called dns_valstatus_t, which was derived from dns_validatorevent_t), is
now part of the dns_validator object. when calling validator callbacks,
the validator itself is now sent as the argument.
(note: this necessitates caution in the callback functions that are
internal to validator.c validators spawn other validators, and it can be
confusing at times whether we need to be looking at val, val->subvalidator,
or val->parent.)
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
callback events from dns_resolver_createfetch() are now posted
using isc_async_run.
other modules which called the resolver and maintained task/taskmgr
objects for this purpose have been cleaned up.
dns_view_weakattach() and _weakdetach() are used by objects that
are created by the view and need it to persist until they are
destroyed, but don't need to prevent it from being shut down. the
validator can use normal view references instead of weak references.
