GCC might fail to compile because it expects a return after UNREACHABLE.
It should ideally just work anyway since UNREACHABLE is either a
noreturn or UB (__builtin_unreachable / C23 unreachable).
Either way, it should be optimized almost always so the fallback is
free or basically free anyway when it isn't optimized out.
The main intention of PROXY protocol is to pass endpoints information
to a back-end server (in our case - BIND). That means that it is a
valid way to spoof endpoints information, as the addresses and ports
extracted from PROXYv2 headers, from the point of view of BIND, are
used instead of the real connection addresses.
Of course, an ability to easily spoof endpoints information can be
considered a security issue when used uncontrollably. To resolve that,
we introduce 'allow-proxy' and 'allow-proxy-on' ACL options. These are
the only ACL options in BIND that work with real PROXY connections
addresses, allowing a DNS server operator to specify from what clients
and on which interfaces he or she is willing to accept PROXY
headers. By default, for security reasons we do not allow to accept
them.
The AES algorithm for DNS cookies was being kept for legacy reasons, and
it can be safely removed in the next major release. Remove both the AES
usage for DNS cookies and the AES implementation itself.
All these pointers are guaranteed to be non-NULL.
Additionally, update a comment to remove obviously outdated
information about the function's requirements.
Instead of creating new memory pools for each new dns_message, change
dns_message_create() method to optionally accept externally created
dns_fixedname_t and dns_rdataset_t memory pools. This allows us to
preallocate the memory pools in ns_client and dns_resolver units for the
lifetime of dns_resolver_t and ns_clientmgr_t.
The dns_badcache unit had (yet another) own locked hashtable
implementation. Replace the hashtable used by dns_badcache with
lock-free cds_lfht implementation from liburcu.
The server was previously tolerant of out-of-date or otherwise bad
DNS SERVER COOKIES that where well formed unless require-cookie was
set. BADCOOKIE is now return for these conditions.
view->adb may be referenced while the view is shutting down as the
zone uses a weak reference to the view and examines view->adb but
dns_view_detach call dns_adb_detach to clear view->adb.
since it is not necessary to find partial matches when looking
up names in a TSIG keyring, we can use a hash table instead of
an RBT to store them.
the tsigkey object now stores the key name as a dns_fixedname
rather than allocating memory for it.
the `name` parameter to dns_tsigkeyring_add() has been removed;
it was unneeded since the tsigkey object already contains a copy
of the name.
the opportunistic cleanup_ring() function has been removed;
it was only slowing down lookups.
the prior practice of passing a dns_name containing the
expanded name of an algorithm to dns_tsigkey_create() and
dns_tsigkey_createfromkey() is unnecessarily cumbersome;
we can now pass the algorithm number instead.
This commit changes send buffers allocation strategy for stream based
transports. Before that change we would allocate a dynamic buffers
sized at 64Kb even when we do not need that much. That could lead to
high memory usage on server. Now we resize the send buffer to match
the size of the actual data, freeing the memory at the end of the
buffer for being reused later.
Use current used pointer - 16 instead of a saved pointer as Coverity
thinks the memory may be freed between assignment and use of 'cp'.
isc_buffer_put{mem,uint{8,16,32}} can theoretically free the memory
if there is a dynamic buffer in use but that is not the case here.
In e18541287231b721c9cdb7e492697a2a80fd83fc, the TCP accept quota code
became broken in a subtle way - the quota would get initialized on the
first accept for the server socket and then deleted from the server
socket, so it would never get applied again.
Properly fixing this required a bigger refactoring of the isc_quota API
code to make it much simpler. The new code decouples the ownership of
the quota and acquiring/releasing the quota limit.
After (during) the refactoring it became more clear that we need to use
the callback from the child side of the accepted connection, and not the
server side.
This should have no functional effects.
The message size stats are specified by RSSAC002 so it's best not
to mess around with how they appear in the statschannel. But it's
worth changing the implementation to use general-purpose histograms,
to reduce code size and benefit from sharded counters.
The isc_time_now() and isc_time_now_hires() were used inconsistently
through the code - either with status check, or without status check,
or via TIME_NOW() macro with RUNTIME_CHECK() on failure.
Refactor the isc_time_now() and isc_time_now_hires() to always fail when
getting current time has failed, and return the isc_time_t value as
return value instead of passing the pointer to result in the argument.
This is a simple replacement using the semantic patch from the previous
commit and as added bonus, one removal of previously undetected unused
variable in named/server.c.
this function was just a front-end for gethostname(). it was
needed when we supported windows, which has a different function
for looking up the hostname; it's not needed any longer.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
The ns_client_aclchecksilent is used to check multiple ACLs before
the decision is made that a query is denied. It is also used to
determine if recursion is available. In those cases we should not
set the extended DNS error "Prohibited".
The Stream DNS implementation needs a peek methods that read the value
from the buffer, but it doesn't advance the current position. Add
isc_buffer_peekuintX methods, refactor the isc_buffer_{get,put}uintN
methods to modern integer types, and move the isc_buffer_getuintN to the
header as static inline functions.
Send the ns_query_cancel() on the recursing clients when we initiate the
named shutdown for faster shutdown.
When we are shutting down the resolver, we cancel all the outstanding
fetches, and the ISC_R_CANCEL events doesn't propagate to the ns_client
callback.
In the future, the better solution how to fix this would be to look at
the shutdown paths and let them all propagate from bottom (loopmgr) to
top (f.e. ns_client).
The dns_cache API contained a cache cleaning mechanism that would be
disabled for 'rbt' based cache. As named doesn't have any other cache
implementations, remove the cache cleaning mechanism from dns_cache API.
the 'nupdates' field was originally used to track whether a client
was ready to shut down, along with other similar counters nreads,
nrecvs, naccepts and nsends. this is now tracked differently, but
nupdates was overlooked when the other counters were removed.
All we need for compression is a very small hash set of compression
offsets, because most of the information we need (the previously added
names) can be found in the message using the compression offsets.
This change combines dns_compress_find() and dns_compress_add() into
one function dns_compress_name() that both finds any existing suffix,
and adds any new prefix to the table. The old split led to performance
problems caused by duplicate names in the compression context.
Compression contexts are now either small or large, which the caller
chooses depending on the expected size of the message. There is no
dynamic resizing.
There is a behaviour change: compression now acts on all the labels in
each name, instead of just the last few.
A small benchmark suggests this is about 2x faster.
Getting the recorded value of 'edns-udp-size' from the resolver requires
strong attach to the dns_view because we are accessing `view->resolver`.
This is not the case in places (f.e. dns_zone unit) where `.udpsize` is
accessed. By moving the .udpsize field from `struct dns_resolver` to
`struct dns_view`, we can access the value directly even with weakly
attached dns_view without the need to lock the view because `.udpsize`
can be accessed after the dns_view object has been shut down.
Formerly, the isc_hash32() would have to change the key in a local copy
to make it case insensitive. Change the isc_siphash24() and
isc_halfsiphash24() functions to lowercase the input directly when
reading it from the memory and converting the uint8_t * array to
64-bit (respectively 32-bit numbers).
It is possible to bypass Response Rate Limiting (RRL)
`responses-per-second` limitation using specially crafted wildcard
names, because the current implementation, when encountering a found
DNS name generated from a wildcard record, just strips the leftmost
label of the name before making a key for the bucket.
While that technique helps with limiting random requests like
<random>.example.com (because all those requests will be accounted
as belonging to a bucket constructed from "example.com" name), it does
not help with random names like subdomain.<random>.example.com.
The best solution would have been to strip not just the leftmost
label, but as many labels as necessary until reaching the suffix part
of the wildcard record from which the found name is generated, however,
we do not have that information readily available in the context of RRL
processing code.
Fix the issue by interpreting all valid wildcard domain names as
the zone's origin name concatenated to the "*" name, so they all will
be put into the same bucket.
Previously:
* applications were using isc_app as the base unit for running the
application and signal handling.
* networking was handled in the netmgr layer, which would start a
number of threads, each with a uv_loop event loop.
* task/event handling was done in the isc_task unit, which used
netmgr event loops to run the isc_event calls.
In this refactoring:
* the network manager now uses isc_loop instead of maintaining its
own worker threads and event loops.
* the taskmgr that manages isc_task instances now also uses isc_loopmgr,
and every isc_task runs on a specific isc_loop bound to the specific
thread.
* applications have been updated as necessary to use the new API.
* new ISC_LOOP_TEST macros have been added to enable unit tests to
run isc_loop event loops. unit tests have been updated to use this
where needed.
* isc_timer was rewritten using the uv_timer, and isc_timermgr_t was
completely removed; isc_timer objects are now directly created on the
isc_loop event loops.
* the isc_timer API has been simplified. the "inactive" timer type has
been removed; timers are now stopped by calling isc_timer_stop()
instead of resetting to inactive.
* isc_manager now creates a loop manager rather than a timer manager.
* modules and applications using isc_timer have been updated to use the
new API.
The BUFSIZ value varies between platforms, it could be 8K on Linux and
512 bytes on mingw. Make sure the buffers are always big enough for the
output data to prevent truncation of the output by appropriately
enlarging or sizing the buffers.
The current logic for determining the address of the socket to which a
client sent its query is:
1. Get the address:port tuple from the netmgr handle using
isc_nmhandle_localaddr().
2. Convert the address:port tuple from step 1 into an isc_netaddr_t
using isc_netaddr_fromsockaddr().
3. Convert the address from step 2 back into a socket address with the
port set to 0 using isc_sockaddr_fromnetaddr().
Note that the port number (readily available in the netmgr handle) is
needlessly lost in the process, preventing it from being recorded in
dnstap captures of client traffic produced by named.
Fix by first storing the address:port tuple returned by
isc_nmhandle_localaddr() in client->destsockaddr and then creating an
isc_netaddr_t from that structure. This allows the port number to be
retained in client->destsockaddr, which is what subsequently gets passed
to dns_dt_send().
ns_client_endrequest() currently contains code that looks for
outstanding quota references and cleans them up if necessary. This
approach masks programming errors because ns_client_endrequest() is only
called from ns__client_reset_cb(), which in turn is only called when all
references to the client's netmgr handle are released, which in turn
only happens after all recursion completion callbacks are invoked
(because isc_nmhandle_attach() is called before every call to
dns_resolver_createfetch() in lib/ns/query.c and the completion callback
is expected to detach from the handle), which in turn is expected to
happen for all recursions attempts, even those that get canceled.
Furthermore, declaring the prototype of ns_client_endrequest() at the
top of lib/ns/client.c is redundant because the definition of that
function is placed before its first use in that file. Remove the
redundant function prototype.
Finally, remove INSIST assertions ensuring quota pointers are NULL in
ns__client_reset_cb() because the latter calls ns_client_endrequest() a
few lines earlier.
Similarly to how different code paths reused common client handle
pointers and fetch references despite being logically unrelated, they
also reuse client->recursionquota, the field in which a reference to the
recursion quota is stored. This unnecessarily forces all code using
that field to be aware of the fact that it is overloaded by different
features.
Overloading client->recursionquota also causes inconsistent behavior.
For example, if prefetch code triggers recursion and then delegation
handling code also triggers recursion, only one of these code paths will
be able to attach to the recursion quota, but both recursions will be
started anyway. In other words, each code path only checks whether the
recursion quota has not been exceeded if the quota has not yet been
attached to by another code path. This behavior theoretically allows
the configured recursion quota to be slightly exceeded; while it is not
expected to be a real-world operational issue, it is still confusing and
should therefore be fixed.
Extend the structures comprising the 'recursions' array with a new field
holding a pointer to the recursion quota that a given recursion process
attached to. Update all code paths using client->recursionquota so that
they use the appropriate slot in the 'recursions' array. Drop the
'recursionquota' field from ns_client_t.
Replace:
- client->prefetchhandle with HANDLE_RECTYPE_PREFETCH(client)
- client->query.prefetch with FETCH_RECTYPE_PREFETCH(client)
This is preparatory work for separating prefetch code from RPZ code.
The aim is to get rid of the obsolete term "GLOBAL14" and instead just
refer to DNS name compression.
This is mostly mechanically renaming
from dns_(de)compress_(get|set)methods()
to dns_(de)compress_(get|set)permitted()
and replacing the related enum by a simple flag, because compression
is either on or off.
There was a proposal in the late 1990s that it might, but it turned
out to be unworkable. See RFC 6891, Extension Mechanisms for
DNS (EDNS(0)), section 5, Extended Label Types.
The remnants of the code that supported this in BIND are redundant.
Previously, tasks could be created either unbound or bound to a specific
thread (worker loop). The unbound tasks would be assigned to a random
thread every time isc_task_send() was called. Because there's no logic
that would assign the task to the least busy worker, this just creates
unpredictability. Instead of random assignment, bind all the previously
unbound tasks to worker 0, which is guaranteed to exist.
The dns_message_gettempname(), dns_message_gettemprdata(),
dns_message_gettemprdataset(), and dns_message_gettemprdatalist() always
succeeds because the memory allocation cannot fail now. Change the API
to return void and cleanup all the use of aforementioned functions.
The .lock, .exiting and .excl members were not using for anything else
than starting task exclusive mode, setting .exiting to true and ending
exclusive mode.
Remove all the stray members and dead code eliminating the task
exclusive mode use from ns_clientmgr.
