The kasp system test is timing critical. The test passes on all
Linux based machines, but fails frequently on Windows. The test
takes a lot more time on Windows and at the final checks fail
because the expected next key event is too far off. For example:
I:kasp:check next key event for zone step2.algorithm-roll.kasp (570)
I:kasp:error: bad next key event time 20909 for zone \
step2.algorithm-roll.kasp (expect 21600)
I:kasp:failed
This is because the kasp system test calculates the time when the
next key event should occur based on the policy. This assumes that
named is able to do key management within a minute. But starting,
named, doing key management for other zones, and reconfiguring takes
much more time on Windows and thus the next key event on Windows is
much shorter than anticipated.
That this happens is a good thing because this means that the
correct next key event is used, but is not so nice for testing, as
it is hard to determine how much time named needed before finishing
the current key event.
Disable the kasp test on Windows now because it is blocking the
release. We know the cause of these test failures, and it is clear
that this is a fault in the test, not the code. Therefore we feel
comfortable disabling the test right now and work on a fix while
unblocking the release.
ABI checker tools generate HTML and TXT API compatibility reports of
BIND libraries. Comparison is being done between two bind source trees
which hold built BIND.
In the CI one version is the reference version defined by
BIND_BASELINE_VERSION variable, the latter one is the HEAD of branch
under test.
Add a test case for algorithm rollover. This is triggered by
changing the dnssec-policy. A new nameserver ns6 is introduced
for tests related to dnssec-policy changes.
This requires a slight change in check_next_key_event to only
check the last occurrence. Also, change the debug log message in
lib/dns/zone.c to deal with checks when no next scheduled key event
exists (and default to loadkeys interval 3600).
- Define the SLOT environment variable before starting the test. This
variable defaults to 0 and that does not work with SoftHSM 2.
- The system test expects the PIN environment variable to be set to
"1234" while bin/tests/prepare-softhsm2.sh sets it to "0000".
Update bin/tests/prepare-softhsm2.sh so that it sets the PIN to
"1234".
- Move contents of bin/tests/system/pkcs11/prereq.sh to
bin/tests/system/pkcs11/setup.sh as the former was creating a file
called "supported" that was getting removed by the latter before
bin/tests/system/pkcs11/tests.sh could access it.
- Fix typo in "have_ecx".
- the configuration summary reported zlib compression was not
supported even when it was.
- when bind.keys.h was regenerated it violated clang-format style.
- add util/cformat.sh, which runs clang-format on all C files with
the default .clang-format, and on all header files with a slightly
modified version.
- use correct bracing after multi-line control statements
- stop aligning variable declarations to avoid problems with pointer
alignment, but retain aligned declarations in header files so that
struct definitions look cleaner.
- static function prototypes in C files can skip the line break after
the return type, but function prototypes in header files still have
the line break.
- don't break-before-brace in function definitions. ISC style calls
for braces on the same line when function parameters fit on a single
line, and a line break if they don't, but clang-format doesn't yet
support that distinction. one-line function definitions are about
four times more common than multi-line, so let's use the option that
deviates less.
- Add quotes before and after zone name when generating "addzone"
input so avoid "unexpected token" errors.
- Use a hex digest for zone filenames when the zone or view name
contains a slash.
- Test with a domain name containing a slash.
- Incidentally added 'catzhash.py' to contrib/scripts to generate
hash labels for catalog zones, as it was needed to write the test.
These functions can be used to pass a uv handle between threads in a
safe manner. The other option is to use uv_pipe and pass the uv_handle
via IPC, which is way more complex. uv_export() and uv_import() functions
existed in libuv at some point but were removed later. This code is
based on the original removed code.
The Windows version of the code uses two functions internal to libuv;
a patch for libuv is attached for exporting these functions.
The util/prepare-softhsm2.sh script is useful for initializing a working
SoftHSM environment which can be used by unit tests and system tests.
However, since it is a test-specific script, it does not really belong
in the util/ subdirectory which is mostly pruned during the BIND source
tarball creation process. Move the prepare-softhsm2.sh script to
bin/tests/ so that its location is more appropriate for its purpose and
also so that it does not get removed during the BIND source tarball
creation process, allowing it to be used for setting up test
environments for tarball-based builds.
The first step in all existing setup.sh scripts is to call clean.sh. To
reduce code duplication and ensure all system tests added in the future
behave consistently with existing ones, invoke clean.sh from run.sh
before calling setup.sh.
Since the role of the bin/tests/system/clean.sh script has now been
reduced to calling a given system test's clean.sh script, remove the
former altogether and replace its only use with a direct invocation of
the latter.
Some semantic patches are meant to be run just once, as they work on
functions with changed prototypes. We keep them for reference, but
disabled them from the CI to save time.
The "runtime" system test currently fails on Windows because it waits
for named to log a message indicating successful startup ("running"),
but that never happens since named on Windows fails to open the
configuration file as its path includes control characters.
Instead of putting control characters in directory names, put them in
the value of the -D command line switch passed to named, which is used
for identifying an instance of named in a process listing and whose
value is completely ignored by named, but still logged.
While a similar check using special characters appears to be working
fine on Windows for the time being, modify it in the same way to avoid
potential future problems on other platforms and make the test cleaner.
Intertwining release notes from different BIND releases in a single XML
file has caused confusion in the past due to different (and often
arbitrary) approaches to keeping/removing release notes from older
releases on different BIND branches. Divide doc/arm/notes.xml into
per-version sections to simplify determining the set of changes
introduced by a given release and to make adding/reviewing release notes
less error-prone.
- ns__client_request() is now called by netmgr with an isc_nmhandle_t
parameter. The handle can then be permanently associated with an
ns_client object.
- The task manager is paused so that isc_task events that may be
triggred during client processing will not fire until after the netmgr is
finished with it. Before any asynchronous event, the client MUST
call isc_nmhandle_ref(client->handle), to prevent the client from
being reset and reused while waiting for an event to process. When
the asynchronous event is complete, isc_nmhandle_unref(client->handle)
must be called to ensure the handle can be reused later.
- reference counting of client objects is now handled in the nmhandle
object. when the handle references drop to zero, the client's "reset"
callback is used to free temporary resources and reiniialize it,
whereupon the handle (and associated client) is placed in the
"inactive handles" queue. when the sysstem is shutdown and the
handles are cleaned up, the client's "put" callback is called to free
all remaining resources.
- because client allocation is no longer handled in the same way,
the '-T clienttest' option has now been removed and is no longer
used by any system tests.
- the unit tests require wrapping the isc_nmhandle_unref() function;
when LD_WRAP is supported, that is used. otherwise we link a
libwrap.so interposer library and use that.
This is a replacement for the existing isc_socket and isc_socketmgr
implementation. It uses libuv for asynchronous network communication;
"networker" objects will be distributed across worker threads reading
incoming packets and sending them for processing.
UDP listener sockets automatically create an array of "child" sockets
so each worker can listen separately.
TCP sockets are shared amongst worker threads.
A TCPDNS socket is a wrapper around a TCP socket, which handles the
the two-byte length field at the beginning of DNS messages over TCP.
(Other wrapper socket types can be implemented in the future to handle
DNS over TLS, DNS over HTTPS, etc.)
