- eliminate dns_view_flushanddetach(), which was only called from
one place; instead, we now call a function dns_view_flushonshutdown()
which sets the view up to flush zones when it is detached normally
with dns_view_detach().
- cleaned up code in dns_view_create().
there's no longer any need for a parameter to specify whether the
function is called while holding the bucket lock, because all
unlocked uses have been removed.
Add a new parameter to the dst_key structure, mark a key modified if
dst_key_(un)set[bool,num,state,time] is called. Only write out key
files during a keymgr run if the metadata has changed.
After removing the isc_task_onshutdown(), the isc_task_shutdown() and
isc_task_destroy() became obsolete.
Remove calls to isc_task_shutdown() and replace the calls to
isc_task_destroy() with isc_task_detach().
Simplify the internal logic to destroy the task when the last reference
is removed.
The isc_task_onshutdown() was used to post event that should be run when
the task is being shutdown. This could happen explicitly in the
isc_test_shutdown() call or implicitly when we detach the last reference
to the task and there are no more events posted on the task.
This whole task onshutdown mechanism just makes things more complicated,
and it's easier to post the "shutdown" events when we are shutting down
explicitly and the existing code already always knows when it should
shutdown the task that's being used to execute the onshutdown events.
Replace the isc_task_onshutdown() calls with explicit calls to execute
the shutdown tasks.
Add a #if to make it clear that struct xrdata->order is only used
in DNS_RDATASET_FIXED mode.
Re-order some variable declarations to merge two #if blocks into one.
As we are going to use libuv outside of the netmgr, we need the shims to
be readily available for the rest of the codebase.
Move the "netmgr/uv-compat.h" to <isc/uv.h> and netmgr/uv-compat.c to
uv.c, and as a rule of thumb, the users of libuv should include
<isc/uv.h> instead of <uv.h> directly.
Additionally, merge netmgr/uverr2result.c into uv.c and rename the
single function from isc__nm_uverr2result() to isc_uverr2result().
These checks have been redundant since the `rbtdb64` implementation
was removed in 2018 (commit 784087390ae8). It isn't possible to create
a zone that uses `database "rbt64"` now that the `rbt64` database
implementation has been removed, so the checks will always fail.
Sometimes the compiler is unable to see that the `empty` variable was
initialized by the call to is_empty(), which can cause a build
failure; I encountered this with CFLAGS=-Os. So get rid of it and use
the result from `is_empty()` instead.
The rbtnode->rpz flag was left behind when rbt and rpz were disentangled
by CHANGES #4576. Removing it makes the comment above correct again.
This reduces the flags so they fit in a 32 bit word again. On 64
bit systems there is still padding so it doesn't change the size
of an rbtnode. On 32 bit systems it reduces an rbtnode by 4 bytes.
Coverity detected issues:
- var_decl: Declaring variable "diff" without initializer.
- uninit_use_in_call: Using uninitialized value "diff.tuples.head" when
calling "dns_diff_clear".
SIG and RRSIG records for private algorithms are supposed to contain
the name / OID of the algorithm used to generate them at the start
of the signature field.
The DNS catalog zones draft version 5 document requires that catalog
zones consumers must reset the member zone's internal zone state when
its unique label changes (either within the same catalog zone or
during change of ownership performed using the "coo" property).
BIND already behaves like that, and, in fact, doesn't support keeping
the zone state during change of ownership even if the unique label
has been kept the same, because BIND always removes the member zone
and adds it back during unique label renaming or change of ownership.
Document the described behavior and add a log message to inform when
unique label renaming occurs.
Add a system test case with unique label renaming.
We check the `rdclass` to be of type IN in `dns_catz_update_process()`
function, and all the other static functions where similar checks exist
are called after (and in the result of) that function being called,
so they are effectively redundant.
The DNS catalog zones draft version 5 document describes various
situations when a catalog zones must be considered as "broken" and
not be processed.
Implement those checks in catz.c and add corresponding system tests.
In zone.c, the "me" strings were defined for functions that could be
traced with "ENTER" macro.
Use the __func__ that's defined by the compiler and is less prone to
copy&paste errors.
previously fctx_done() detached the fctx but did not clear the pointer
passed into it from the caller. in some conditions, when rctx_done()
was reached while waiting for a validator to complete, fctx_done()
could be called twice on the same fetch, causing a double detach.
fctx_done() now clears the fctx pointer, to reduce the chances of
such mistakes.
There is a possibility for `udp_recv()` to be called with `eresult`
being `ISC_R_SUCCESS`, but nevertheless with already deactivated `resp`,
which can happen when the request has been canceled in the meantime.
In dns_adb_cancelfind(), we need to release the find lock and
then acquire the bucket and find locks in that order, for
consistency with locking hierarchy elsehwere. Previously we
were only acquiring the bucket lock.
Also rewrote the function for better readability.
The dns__adb_attach() had an assertion failure that prevented to attach
to dns_adb if the dns_adb was shutting down. There was a race between
checking for .exiting in dns_adb_createfind and creating new_adbfind() -
other thread could have set the .exiting to true between the check.
Remove the assertion failure and allow attaching to dns_adb even while
shutting down. The process of dns_adb shutting down would be noticed
only a moments later when any other callback is called.
The rctx_chaseds() function calls dns_resolver_createfetch(), passing
fctx->task as the target task to run resume_dslookup() from. This
breaks task-based serialization of events as fctx->task is the task that
the dns_resolver_createfetch() caller wants to receive its fetch
completion event in; meanwhile, intermediate fetches started by the
resolver itself (e.g. related to QNAME minimization) must use
res->buckets[bucketnum].task instead. This discrepancy may cause
trouble if the resume_dslookup() callback happens to be run concurrently
with e.g. fctx_doshutdown().
Fix by passing the correct task to dns_resolver_createfetch() in
rctx_chaseds().
dns_message_findname and dns_message_sectiontotext incorrectly accepted
DNS_SECTION_ANY. If DNS_SECTION_ANY was passed the section array could
be incorrectly accessed at (-1).
dns_message_pseudosectiontotext and dns_message_pseudosectiontoyaml
incorrectly accepted DNS_PSEUDOSECTION_ANY. These functions are
designed to process a single section.
The only place where isc_task_sendto() was used was in dns_resolver
unit, where the "sendto" part was actually no-op, because dns_resolver
uses bound tasks. Remove the isc_task_sendto() and
isc_task_sendtoanddetach() functions in favor of using bound tasks
create with isc_task_create_bound().
Additionally, cache the number of running netmgr threads (nworkers)
locally to reduce the number of function calls.
For some applications, it's useful to not listen on full battery of
threads. Add workers argument to all isc_nm_listen*() functions and
convenience ISC_NM_LISTEN_ONE and ISC_NM_LISTEN_ALL macros.
dns_rdata_fromtext and dns_rdata_fromwire now checks that there is
a valid name or oid at the start of the keydata when the key algorithm
is PRIVATEDNS and PRIVATEOID respectively.
dns_rdata_totext now prints out the oid if the algorithm is PRIVATEOID.
Catalog zones change of ownership is special mechanism to facilitate
controlled migration of a member zone from one catalog to another.
It is implemented using catalog zones property named "coo" and is
documented in DNS catalog zones draft version 5 document.
Implement the feature using a new hash table in the catalog zone
structure, which holds the added "coo" properties for the catalog zone
(containing the target catalog zone's name), and the key for the hash
table being the member zone's name for which the "coo" property is being
created.
Change some log messages to have consistent zone name quoting types.
Update the ARM with change of ownership documentation and usage
examples.
Add tests which check newly the added features.
When there are multiple record datasets in a database node of a catalog
zone, and BIND encounters a soft error during processing of a dataset,
it breaks from the loop and doesn't process the other datasets in the
node.
There are cases when this is not desired. For example, the catalog zones
draft version 5 states that there must be a TXT RRset named
`version.$CATZ` with exactly one RR, but it doesn't set a limitation
on possible non-TXT RRsets named `version.$CATZ` existing alongside
with the TXT one. In case when one exists, we will get a processing
error and will not continue the loop to process the TXT RRset coming
next.
Remove the "break" statement to continue processing all record datasets.
When processing a new or updated catalog zone, the record datasets
from the database are being processed in order. This creates a
problem because we need to know the version of the catalog zone
schema to process some of the records differently, but we do not
know the version until the 'version' record gets processed.
Find the 'version' record and process it first, only then iterate over
the database to process the rest, making sure not to process the
'version' record twice.
According to DNS catalog zones draft version 5 document, catalog
zone custom properties must be placed under the "ext" label.
Make necessary changes to support the new custom properties syntax in
catalog zones with version "2" of the schema.
Change the default catalog zones schema version from "1" to "2" in
ARM to prepare for the new features and changes which come starting
from this commit in order to support the latest DNS catalog zones draft
document.
Make some restructuring in ARM and rename the term catalog zone "option"
to "custom property" to better reflect the terms used in the draft.
Change the version of 'catalog1.zone.' catalog zone in the "catz" system
test to "2", and leave the version of 'catalog2.zone.' catalog zone at
version "1" to test both versions.
Add tests to check that the new syntax works only with the new schema
version, and that the old syntax works only with the legacy schema
version catalog zones.
