This commit adds a new stream-based transport with an interface
compatible with TCP. The transport is built on top of TCP transport
and the new PROXYv2 handling code. Despite being built on top of TCP,
it can be easily extended to work on top of any TCP-like stream-based
transport. The intention of having this transport is to add PROXYv2
support into all existing stream-based DNS transport (DNS over TCP,
DNS over TLS, DNS over HTTP) by making the work on top of this new
transport.
The idea behind the transport is simple after accepting the connection
or connecting to a remote server it enters PROXYv2 handling mode: that
is, it either attempts to read (when accepting the connection) or send
(when establishing a connection) a PROXYv2 header. After that it works
like a mere wrapper on top of the underlying stream-based
transport (TCP).
The Unix Domain Sockets support in BIND 9 has been completely disabled
since BIND 9.18 and it has been a fatal error since then. Cleanup the
code and the documentation that suggest that Unix Domain Sockets are
supported.
Use the new isc_mem_c*() calloc-like API for allocations that are
zeroed.
In turn, this also fixes couple of incorrect usage of the ISC_MEM_ZERO
for structures that need to be zeroed explicitly.
There are few places where isc_mem_cput() is used on structures with a
flexible member (or similar).
Instead of growing and never shrinking the list of the inactive
handles (to be reused mostly on the UDP connections), limit the number
of maximum number of inactive handles kept to 64. Instead of caching
the inactive handles for all listening sockets, enable the caching on on
UDP listening sockets. For TCP, the handles were cached for each
accepted socket thus reusing the handles only for long-standing TCP
connections, but not reusing the handles across different TCP streams.
The isc_async API was using lock-free stack (where enqueue operation was
not wait-free). Change the isc_async to use cds_wfcqueue internally -
enqueue and splice (move the queue members from one list to another) is
nonblocking and wait-free.
When shutting down TCP sockets, the read callback calling logic was
flawed, it would call either one less callback or one extra. Fix the
logic in the way:
1. When isc_nm_read() has been called but isc_nm_read_stop() hasn't on
the handle, the read callback will be called with ISC_R_CANCELED to
cancel active reading from the socket/handle.
2. When isc_nm_read() has been called and isc_nm_read_stop() has been
called on the on the handle, the read callback will be called with
ISC_R_SHUTTINGDOWN to signal that the dormant (not-reading) socket
is being shut down.
3. The .reading and .recv_read flags are little bit tricky. The
.reading flag indicates if the outer layer is reading the data (that
would be uv_tcp_t for TCP and isc_nmsocket_t (TCP) for TLSStream),
the .recv_read flag indicates whether somebody is interested in the
data read from the socket.
Usually, you would expect that the .reading should be false when
.recv_read is false, but it gets even more tricky with TLSStream as
the TLS protocol might need to read from the socket even when sending
data.
Fix the usage of the .recv_read and .reading flags in the TLSStream
to their true meaning - which mostly consist of using .recv_read
everywhere and then wrapping isc_nm_read() and isc_nm_read_stop()
with the .reading flag.
4. The TLS failed read helper has been modified to resemble the TCP code
as much as possible, clearing and re-setting the .recv_read flag in
the TCP timeout code has been fixed and .recv_read is now cleared
when isc_nm_read_stop() has been called on the streaming socket.
5. The use of Network Manager in the named_controlconf, isccc_ccmsg, and
isc_httpd units have been greatly simplified due to the improved design.
6. More unit tests for TCP and TLS testing the shutdown conditions have
been added.
Co-authored-by: Ondřej Surý <ondrej@isc.org>
Co-authored-by: Artem Boldariev <artem@isc.org>
By inspecting the code, it was discovered that .sendbuf member of the
isc__nm_networker_t was unused and just consuming ~64k per worker.
Remove the member and the association allocation/deallocation.
In e18541287231b721c9cdb7e492697a2a80fd83fc, the TCP accept quota code
became broken in a subtle way - the quota would get initialized on the
first accept for the server socket and then deleted from the server
socket, so it would never get applied again.
Properly fixing this required a bigger refactoring of the isc_quota API
code to make it much simpler. The new code decouples the ownership of
the quota and acquiring/releasing the quota limit.
After (during) the refactoring it became more clear that we need to use
the callback from the child side of the accepted connection, and not the
server side.
Instead of using isc_async_run() when closing StreamDNS handle, add
isc_job_t member to the isc_nmhandle_t structure and use isc_job_run()
to avoid allocation/deallocation on the StreamDNS hot-path.
The `isc_trampoline` module had a lot of machinery to support stable
thread IDs for use by hazard pointers. But the hazard pointer code
is gone, and the `isc_loop` module now has its own per-loop thread
IDs.
The trampoline machinery seems over-complicated for its remaining
tasks, so move the per-thread initialization into `isc/thread.c`,
and delete the rest.
Instead of marking the unused entities with UNUSED(x) macro in the
function body, use a `ISC_ATTR_UNUSED` attribute macro that expans to
C23 [[maybe_unused]] or __attribute__((__unused__)) as fallback.
When accepting a TCP connection in the higher layers (tlsstream,
streamdns, and http) attach to the socket the connection was accepted
on, and use this socket instead of the parent listening socket.
This has an advantage - accessing the sock->listener now doesn't break
the thread boundaries, so we can properly check whether the socket is
being closed without requiring .closing member to be atomic_bool.
The last atomic_bool variable sock->active was converted to non-atomic
bool by properly handling the listening socket case where we were
checking parent socket instead of children sockets.
This is no longer necessary as we properly set the .active to false on
the children sockets.
Additionally, cleanup the .rchildren - the atomic variable was used for
mutex+condition to block until all children were listening, but that's
now being handled by a barrier.
Finally, just remove dead .self and .active_child_connections members of
the netmgr socket.
Now that everything runs on their own loop and we don't cross the thread
boundaries (with few exceptions), most of the atomic_bool variables used
to track the socket state have been unatomicized because they are always
accessed from the matching thread.
The remaining few have been relaxed: a) the sock->active is now using
acquire/release memory ordering; b) the various global limits are now
using relaxed memory ordering - we don't really care about the
synchronization for those.
Change the isc_job_run() to not-make any allocations. The caller must
make sure that it allocates isc_job_t - usually as part of the argument
passed to the callback.
For simple jobs, using isc_async_run() is advised as it allocates its
own separate isc_job_t.
Change the isc__nm_uvreq_t to have the idle callback as a separate
member as we always need to use it to properly close the uvreq.
Slightly refactor uvreq_put and uvreq_get to remove the unneeded
arguments - in uvreq_get(), we always use sock->worker, and in
uvreq_put, we always use req->sock, so there's not reason to pass those
extra arguments.
Instead of using isc_job_run() that's quite heavy as it allocates memory
for every new job, add uv_idle_t to uvreq union, and use uv_idle API
directly to execute the connect/read/send callback without any
additional allocations.
when isc_nm_listenstreamdns() is called with a local port of 0,
a random port is chosen. call uv_getsockname() to determine what
the port is as soon as the socket is bound, and add a function
isc_nmsocket_getaddr() to retrieve it, so that the caller can
connect to the listening socket. this will be used in cases
where the same process is acting as both client and server.
Simplify the stopping of the generic socket children by using the
isc_async API from the loopmgr instead of using the asychronous
netievent mechanism in the netmgr.
Simplify the setting of the TLS contexts by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the canceling of the StreamDNS socket by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the reading from the StreamDNS socket by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the setting of the DoH endpoints by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the acception the new TCP connection by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the canceling of the UDP socket by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the stopping of the TCP children by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the starting of the TCP children by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the stopping of the UDP children by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
Simplify the starting of the UDP children by using the isc_async API
from the loopmgr instead of using the asychronous netievent mechanism in
the netmgr.
The active handles accounting was both using atomic counter and ISC_LIST
to keep track of active handles. Remove the atomic counter that was in
use before the ISC_LIST was added for better tracking of the handles
attached to the socket.
Instead of calling isc__nmhandle_detach calling
nmhandle_detach_cb() asynchronously when there's closehandle_cb
initialized, convert the closehandle_cb to use isc_job, and make the
isc__nmhandle_detach() to be fully synchronous.
The netmgr connect, read and send callbacks can now only be executed on
the same loop, convert it from asynchronous netievent queue event to
more direct isc_job.
as there is no further use of isc_task in BIND, this commit removes
it, along with isc_taskmgr, isc_event, and all other related types.
functions that accepted taskmgr as a parameter have been cleaned up.
as a result of this change, some functions can no longer fail, so
they've been changed to type void, and their callers have been
updated accordingly.
the tasks table has been removed from the statistics channel and
the stats version has been updated. dns_dyndbctx has been changed
to reference the loopmgr instead of taskmgr, and DNS_DYNDB_VERSION
has been udpated as well.
libuv support for receiving multiple UDP messages in a single system
call (recvmmsg()) has been tweaked several times between libuv versions
1.35.0 and 1.40.0. Mixing and matching libuv versions within that span
may lead to assertion failures and is therefore considered harmful, so
try to limit potential damage be preventing users from mixing libuv
versions with distinct sets of recvmmsg()-related flags.
The implementation of UDP recvmmsg in libuv 1.35 and 1.36 is
incomplete and could cause assertion failure under certain
circumstances.
Modify the configure and runtime checks to report a fatal error when
trying to compile or run with the affected versions.
