mir/bind
2
0
Fork 0
mirror of https://gitlab.isc.org/isc-projects/bind9 synced 2025-08-30 22:15:20 +00:00
Code Issues Releases Wiki Activity
Files
093af1c00ac25e4f132fe2442a24e1264aadb28d
bind/bin/tests/system/dnstap/tests.sh
Michal Nowak 093af1c00a Drop $SYSTEMTESTTOP from bin/tests/system/ 
The $SYSTEMTESTTOP shell variable if often set to .. in various shell
scripts inside bin/tests/system/, but most of the time it is only
used one line later, while sourcing conf.sh. This hardly improves
code readability.

$SYSTEMTESTTOP is also used for the purpose of referencing
scripts/files living in bin/tests/system/, but given that the
variable is always set to a short, relative path, we can drop it and
replace all of its occurrences with the relative path without adversely
affecting code readability.
2020-07-30 15:58:50 +02:00

786 lines
19 KiB
Bash
Raw Blame History

#!/bin/sh
#
# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
#
# See the COPYRIGHT file distributed with this work for additional
# information regarding copyright ownership.
. ../conf.sh
DIGOPTS="+short -p ${PORT}"
RNDCCMD="$RNDC -p ${CONTROLPORT} -c ../common/rndc.conf"
status=0
for bad in bad-*.conf
do
ret=0
echo_i "checking that named-checkconf detects error in $bad"
$CHECKCONF $bad > /dev/null 2>&1
if [ $? != 1 ]; then echo_i "failed"; ret=1; fi
status=`expr $status + $ret`
done
for good in good-*.conf
do
ret=0
echo_i "checking that named-checkconf detects no error in $good"
$CHECKCONF $good > /dev/null 2>&1
if [ $? != 0 ]; then echo_i "failed"; ret=1; fi
status=`expr $status + $ret`
done
echo_i "wait for servers to finish loading"
ret=0
wait_for_log 20 "all zones loaded" ns1/named.run || ret=1
wait_for_log 20 "all zones loaded" ns2/named.run || ret=1
wait_for_log 20 "all zones loaded" ns3/named.run || ret=1
wait_for_log 20 "all zones loaded" ns4/named.run || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
# both the 'a.example/A' lookup and the './NS' lookup to ns1
# need to complete before reopening/rolling for the counts to
# be correct.
$DIG $DIGOPTS @10.53.0.3 a.example > dig.out
wait_for_log 20 "(.): reset client" ns1/named.run || true
# check three different dnstap reopen/roll methods:
# ns1: dnstap-reopen; ns2: dnstap -reopen; ns3: dnstap -roll
mv ns1/dnstap.out ns1/dnstap.out.save
mv ns2/dnstap.out ns2/dnstap.out.save
if [ -n "$FSTRM_CAPTURE" ] ; then
$FSTRM_CAPTURE -t protobuf:dnstap.Dnstap -u ns4/dnstap.out \
-w dnstap.out > fstrm_capture.out 2>&1 &
fstrm_capture_pid=$!
fi
$RNDCCMD -s 10.53.0.1 dnstap-reopen | sed 's/^/ns1 /' | cat_i
$RNDCCMD -s 10.53.0.2 dnstap -reopen | sed 's/^/ns2 /' | cat_i
$RNDCCMD -s 10.53.0.3 dnstap -roll | sed 's/^/ns3 /' | cat_i
$RNDCCMD -s 10.53.0.4 dnstap -reopen | sed 's/^/ns4 /' | cat_i
$DIG $DIGOPTS @10.53.0.3 a.example > dig.out
# send an UPDATE to ns2
$NSUPDATE <<- EOF
server 10.53.0.2 ${PORT}
zone example
update add b.example 3600 in a 10.10.10.10
send
EOF
# XXX: file output should be flushed once a second according
# to the libfstrm source, but it doesn't seem to happen until
# enough data has accumulated. to get all the output, we stop
# the name servers, forcing a flush on shutdown. it would be
# nice to find a better way to do this.
$RNDCCMD -s 10.53.0.1 stop | sed 's/^/ns1 /' | cat_i
$RNDCCMD -s 10.53.0.2 stop | sed 's/^/ns2 /' | cat_i
$RNDCCMD -s 10.53.0.3 stop | sed 's/^/ns3 /' | cat_i
sleep 1
echo_i "checking initial message counts"
udp1=`$DNSTAPREAD ns1/dnstap.out.save | grep "UDP " | wc -l`
tcp1=`$DNSTAPREAD ns1/dnstap.out.save | grep "TCP " | wc -l`
aq1=`$DNSTAPREAD ns1/dnstap.out.save | grep "AQ " | wc -l`
ar1=`$DNSTAPREAD ns1/dnstap.out.save | grep "AR " | wc -l`
cq1=`$DNSTAPREAD ns1/dnstap.out.save | grep "CQ " | wc -l`
cr1=`$DNSTAPREAD ns1/dnstap.out.save | grep "CR " | wc -l`
rq1=`$DNSTAPREAD ns1/dnstap.out.save | grep "RQ " | wc -l`
rr1=`$DNSTAPREAD ns1/dnstap.out.save | grep "RR " | wc -l`
uq1=`$DNSTAPREAD ns1/dnstap.out.save | grep "UQ " | wc -l`
ur1=`$DNSTAPREAD ns1/dnstap.out.save | grep "UR " | wc -l`
udp2=`$DNSTAPREAD ns2/dnstap.out.save | grep "UDP " | wc -l`
tcp2=`$DNSTAPREAD ns2/dnstap.out.save | grep "TCP " | wc -l`
aq2=`$DNSTAPREAD ns2/dnstap.out.save | grep "AQ " | wc -l`
ar2=`$DNSTAPREAD ns2/dnstap.out.save | grep "AR " | wc -l`
cq2=`$DNSTAPREAD ns2/dnstap.out.save | grep "CQ " | wc -l`
cr2=`$DNSTAPREAD ns2/dnstap.out.save | grep "CR " | wc -l`
rq2=`$DNSTAPREAD ns2/dnstap.out.save | grep "RQ " | wc -l`
rr2=`$DNSTAPREAD ns2/dnstap.out.save | grep "RR " | wc -l`
uq2=`$DNSTAPREAD ns2/dnstap.out.save | grep "UQ " | wc -l`
ur2=`$DNSTAPREAD ns2/dnstap.out.save | grep "UR " | wc -l`
mv ns3/dnstap.out.0 ns3/dnstap.out.save
udp3=`$DNSTAPREAD ns3/dnstap.out.save | grep "UDP " | wc -l`
tcp3=`$DNSTAPREAD ns3/dnstap.out.save | grep "TCP " | wc -l`
aq3=`$DNSTAPREAD ns3/dnstap.out.save | grep "AQ " | wc -l`
ar3=`$DNSTAPREAD ns3/dnstap.out.save | grep "AR " | wc -l`
cq3=`$DNSTAPREAD ns3/dnstap.out.save | grep "CQ " | wc -l`
cr3=`$DNSTAPREAD ns3/dnstap.out.save | grep "CR " | wc -l`
rq3=`$DNSTAPREAD ns3/dnstap.out.save | grep "RQ " | wc -l`
rr3=`$DNSTAPREAD ns3/dnstap.out.save | grep "RR " | wc -l`
uq3=`$DNSTAPREAD ns3/dnstap.out.save | grep "UQ " | wc -l`
ur3=`$DNSTAPREAD ns3/dnstap.out.save | grep "UR " | wc -l`
echo_i "checking UDP message counts"
ret=0
[ $udp1 -eq 0 ] || {
echo_i "ns1 $udp1 expected 0"
ret=1
}
[ $udp2 -eq 2 ] || {
echo_i "ns2 $udp2 expected 2"
ret=1
}
[ $udp3 -eq 4 ] || {
echo_i "ns3 $udp3 expected 4"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking TCP message counts"
ret=0
[ $tcp1 -eq 6 ] || {
echo_i "ns1 $tcp1 expected 6"
ret=1
}
[ $tcp2 -eq 2 ] || {
echo_i "ns2 $tcp2 expected 2"
ret=1
}
[ $tcp3 -eq 6 ] || {
echo_i "ns3 $tcp3 expected 6"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking AUTH_QUERY message counts"
ret=0
[ $aq1 -eq 3 ] || {
echo_i "ns1 $aq1 exepcted 3"
ret=1
}
[ $aq2 -eq 2 ] || {
echo_i "ns2 $aq2 expected 2"
ret=1
}
[ $aq3 -eq 1 ] || {
echo_i "ns3 $aq3 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking AUTH_RESPONSE message counts"
ret=0
[ $ar1 -eq 2 ] || {
echo_i "ns1 $ar1 expected 2"
ret=1
}
[ $ar2 -eq 1 ] || {
echo_i "ns2 $ar2 expected 1"
ret=1
}
[ $ar3 -eq 0 ] || {
echo_i "ns3 $ar3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking CLIENT_QUERY message counts"
ret=0
[ $cq1 -eq 0 ] || {
echo_i "ns1 $cq1 expected 0"
ret=1
}
[ $cq2 -eq 0 ] || {
echo_i "ns2 $cq2 expected 0"
ret=1
}
[ $cq3 -eq 1 ] || {
echo_i "ns3 $cq3 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking CLIENT_RESPONSE message counts"
ret=0
[ $cr1 -eq 1 ] || {
echo_i "ns1 $cr1 expected 1"
ret=1
}
[ $cr2 -eq 1 ] || {
echo_i "ns2 $cr2 expected 1"
ret=1
}
[ $cr3 -eq 2 ] || {
echo_i "ns3 $cr3 expected 2"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking RESOLVER_QUERY message counts"
ret=0
[ $rq1 -eq 0 ] || {
echo_i "ns1 $rq1 expected 0"
ret=1
}
[ $rq2 -eq 0 ] || {
echo_i "ns2 $rq2 expected 0"
ret=1
}
[ $rq3 -eq 3 ] || {
echo_i "ns3 $rq3 expected 3"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking RESOLVER_RESPONSE message counts"
ret=0
[ $rr1 -eq 0 ] || {
echo_i "ns1 $rr1 expected 0"
ret=1
}
[ $rr2 -eq 0 ] || {
echo_i "ns2 $rr2 expected 0"
ret=1
}
[ $rr3 -eq 3 ] || {
echo_i "ns3 $rr3 expected 3"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking UPDATE_QUERY message counts"
ret=0
[ $uq1 -eq 0 ] || {
echo_i "ns1 $uq1 expected 0"
ret=1
}
[ $uq2 -eq 0 ] || {
echo_i "ns2 $uq2 expected 0"
ret=1
}
[ $uq3 -eq 0 ] || {
echo_i "ns3 $uq3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking UPDATE_RESPONSE message counts"
ret=0
[ $ur1 -eq 0 ] || {
echo_i "ns1 $ur1 expected 0"
ret=1
}
[ $ur2 -eq 0 ] || {
echo_i "ns2 $ur2 expected 0"
ret=1
}
[ $ur3 -eq 0 ] || {
echo_i "ns3 $ur3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking reopened message counts"
udp1=`$DNSTAPREAD ns1/dnstap.out | grep "UDP " | wc -l`
tcp1=`$DNSTAPREAD ns1/dnstap.out | grep "TCP " | wc -l`
aq1=`$DNSTAPREAD ns1/dnstap.out | grep "AQ " | wc -l`
ar1=`$DNSTAPREAD ns1/dnstap.out | grep "AR " | wc -l`
cq1=`$DNSTAPREAD ns1/dnstap.out | grep "CQ " | wc -l`
cr1=`$DNSTAPREAD ns1/dnstap.out | grep "CR " | wc -l`
rq1=`$DNSTAPREAD ns1/dnstap.out | grep "RQ " | wc -l`
rr1=`$DNSTAPREAD ns1/dnstap.out | grep "RR " | wc -l`
uq1=`$DNSTAPREAD ns1/dnstap.out | grep "UQ " | wc -l`
ur1=`$DNSTAPREAD ns1/dnstap.out | grep "UR " | wc -l`
udp2=`$DNSTAPREAD ns2/dnstap.out | grep "UDP " | wc -l`
tcp2=`$DNSTAPREAD ns2/dnstap.out | grep "TCP " | wc -l`
aq2=`$DNSTAPREAD ns2/dnstap.out | grep "AQ " | wc -l`
ar2=`$DNSTAPREAD ns2/dnstap.out | grep "AR " | wc -l`
cq2=`$DNSTAPREAD ns2/dnstap.out | grep "CQ " | wc -l`
cr2=`$DNSTAPREAD ns2/dnstap.out | grep "CR " | wc -l`
rq2=`$DNSTAPREAD ns2/dnstap.out | grep "RQ " | wc -l`
rr2=`$DNSTAPREAD ns2/dnstap.out | grep "RR " | wc -l`
uq2=`$DNSTAPREAD ns2/dnstap.out | grep "UQ " | wc -l`
ur2=`$DNSTAPREAD ns2/dnstap.out | grep "UR " | wc -l`
udp3=`$DNSTAPREAD ns3/dnstap.out | grep "UDP " | wc -l`
tcp3=`$DNSTAPREAD ns3/dnstap.out | grep "TCP " | wc -l`
aq3=`$DNSTAPREAD ns3/dnstap.out | grep "AQ " | wc -l`
ar3=`$DNSTAPREAD ns3/dnstap.out | grep "AR " | wc -l`
cq3=`$DNSTAPREAD ns3/dnstap.out | grep "CQ " | wc -l`
cr3=`$DNSTAPREAD ns3/dnstap.out | grep "CR " | wc -l`
rq3=`$DNSTAPREAD ns3/dnstap.out | grep "RQ " | wc -l`
rr3=`$DNSTAPREAD ns3/dnstap.out | grep "RR " | wc -l`
uq3=`$DNSTAPREAD ns3/dnstap.out | grep "UQ " | wc -l`
ur3=`$DNSTAPREAD ns3/dnstap.out | grep "UR " | wc -l`
echo_i "checking UDP message counts"
ret=0
[ $udp1 -eq 0 ] || {
echo_i "ns1 $udp1 expected 0"
ret=1
}
[ $udp2 -eq 2 ] || {
echo_i "ns2 $udp2 expected 2"
ret=1
}
[ $udp3 -eq 2 ] || {
echo_i "ns3 $udp3 expected 2"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking TCP message counts"
ret=0
[ $tcp1 -eq 0 ] || {
echo_i "ns1 $tcp1 expected 0"
ret=1
}
[ $tcp2 -eq 0 ] || {
echo_i "ns2 $tcp2 expected 0"
ret=1
}
[ $tcp3 -eq 0 ] || {
echo_i "ns3 $tcp3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking AUTH_QUERY message counts"
ret=0
[ $aq1 -eq 0 ] || {
echo_i "ns1 $aq1 exepcted 0"
ret=1
}
[ $aq2 -eq 0 ] || {
echo_i "ns2 $aq2 expected 0"
ret=1
}
[ $aq3 -eq 0 ] || {
echo_i "ns3 $aq3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking AUTH_RESPONSE message counts"
ret=0
[ $ar1 -eq 0 ] || {
echo_i "ns1 $ar1 expected 0"
ret=1
}
[ $ar2 -eq 0 ] || {
echo_i "ns2 $ar2 expected 0"
ret=1
}
[ $ar3 -eq 0 ] || {
echo_i "ns3 $ar3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking CLIENT_QUERY message counts"
ret=0
[ $cq1 -eq 0 ] || {
echo_i "ns1 $cq1 expected 0"
ret=1
}
[ $cq2 -eq 0 ] || {
echo_i "ns2 $cq2 expected 0"
ret=1
}
[ $cq3 -eq 1 ] || {
echo_i "ns3 $cq3 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking CLIENT_RESPONSE message counts"
ret=0
[ $cr1 -eq 0 ] || {
echo_i "ns1 $cr1 expected 0"
ret=1
}
[ $cr2 -eq 0 ] || {
echo_i "ns2 $cr2 expected 0"
ret=1
}
[ $cr3 -eq 1 ] || {
echo_i "ns3 $cr3 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking RESOLVER_QUERY message counts"
ret=0
[ $rq1 -eq 0 ] || {
echo_i "ns1 $rq1 expected 0"
ret=1
}
[ $rq2 -eq 0 ] || {
echo_i "ns2 $rq2 expected 0"
ret=1
}
[ $rq3 -eq 0 ] || {
echo_i "ns3 $rq3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking RESOLVER_RESPONSE message counts"
ret=0
[ $rr1 -eq 0 ] || {
echo_i "ns1 $rr1 expected 0"
ret=1
}
[ $rr2 -eq 0 ] || {
echo_i "ns2 $rr2 expected 0"
ret=1
}
[ $rr3 -eq 0 ] || {
echo_i "ns3 $rr3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking UPDATE_QUERY message counts"
ret=0
[ $uq1 -eq 0 ] || {
echo_i "ns1 $uq1 expected 0"
ret=1
}
[ $uq2 -eq 1 ] || {
echo_i "ns2 $uq2 expected 1"
ret=1
}
[ $uq3 -eq 0 ] || {
echo_i "ns3 $uq3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking UPDATE_RESPONSE message counts"
ret=0
[ $ur1 -eq 0 ] || {
echo_i "ns1 $ur1 expected 0"
ret=1
}
[ $ur2 -eq 1 ] || {
echo_i "ns2 $ur2 expected 1"
ret=1
}
[ $ur3 -eq 0 ] || {
echo_i "ns3 $ur3 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
HAS_PYYAML=0
if [ -x "$PYTHON" ] ; then
$PYTHON -c "import yaml" 2> /dev/null && HAS_PYYAML=1
fi
if [ $HAS_PYYAML -ne 0 ] ; then
echo_i "checking dnstap-read YAML output"
ret=0
{
$PYTHON ydump.py "$DNSTAPREAD" "ns3/dnstap.out.save" > ydump.out || ret=1
} | cat_i
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking dnstap-read hex output"
ret=0
hex=`$DNSTAPREAD -x ns3/dnstap.out | tail -1`
echo $hex | $WIRETEST > dnstap.hex
grep 'status: NOERROR' dnstap.hex > /dev/null 2>&1 || ret=1
grep 'ANSWER: 3, AUTHORITY: 1' dnstap.hex > /dev/null 2>&1 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
if [ -n "$FSTRM_CAPTURE" ] ; then
$DIG $DIGOPTS @10.53.0.4 a.example > dig.out
# send an UPDATE to ns4
$NSUPDATE <<- EOF > nsupdate.out 2>&1
server 10.53.0.4 ${PORT}
zone example
update add b.example 3600 in a 10.10.10.10
send
EOF
grep "update failed: NOTAUTH" nsupdate.out > /dev/null || ret=1
echo_i "checking unix socket message counts"
sleep 2
kill $fstrm_capture_pid
wait
udp4=`$DNSTAPREAD dnstap.out | grep "UDP " | wc -l`
tcp4=`$DNSTAPREAD dnstap.out | grep "TCP " | wc -l`
aq4=`$DNSTAPREAD dnstap.out | grep "AQ " | wc -l`
ar4=`$DNSTAPREAD dnstap.out | grep "AR " | wc -l`
cq4=`$DNSTAPREAD dnstap.out | grep "CQ " | wc -l`
cr4=`$DNSTAPREAD dnstap.out | grep "CR " | wc -l`
rq4=`$DNSTAPREAD dnstap.out | grep "RQ " | wc -l`
rr4=`$DNSTAPREAD dnstap.out | grep "RR " | wc -l`
uq4=`$DNSTAPREAD dnstap.out | grep "UQ " | wc -l`
ur4=`$DNSTAPREAD dnstap.out | grep "UR " | wc -l`
echo_i "checking UDP message counts"
ret=0
[ $udp4 -eq 4 ] || {
echo_i "ns4 $udp4 expected 4"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking TCP message counts"
ret=0
[ $tcp4 -eq 0 ] || {
echo_i "ns4 $tcp4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking AUTH_QUERY message counts"
ret=0
[ $aq4 -eq 0 ] || {
echo_i "ns4 $aq4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking AUTH_RESPONSE message counts"
ret=0
[ $ar4 -eq 0 ] || {
echo_i "ns4 $ar4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking CLIENT_QUERY message counts"
ret=0
[ $cq4 -eq 1 ] || {
echo_i "ns4 $cq4 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking CLIENT_RESPONSE message counts"
ret=0
[ $cr4 -eq 1 ] || {
echo_i "ns4 $cr4 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking RESOLVER_QUERY message counts"
ret=0
[ $rq4 -eq 0 ] || {
echo_i "ns4 $rq4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking RESOLVER_RESPONSE message counts"
ret=0
[ $rr4 -eq 0 ] || {
echo_i "ns4 $rr4 expected 0"
ret=1
}
echo_i "checking UPDATE_QUERY message counts"
ret=0
[ $uq4 -eq 1 ] || {
echo_i "ns4 $uq4 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking UPDATE_RESPONSE message counts"
ret=0
[ $ur4 -eq 1 ] || {
echo_i "ns4 $ur4 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
mv dnstap.out dnstap.out.save
$FSTRM_CAPTURE -t protobuf:dnstap.Dnstap -u ns4/dnstap.out \
-w dnstap.out > fstrm_capture.out 2>&1 &
fstrm_capture_pid=$!
$RNDCCMD -s 10.53.0.4 dnstap -reopen | sed 's/^/ns4 /' | cat_i
$DIG $DIGOPTS @10.53.0.4 a.example > dig.out
echo_i "checking reopened unix socket message counts"
sleep 2
kill $fstrm_capture_pid
wait
udp4=`$DNSTAPREAD dnstap.out | grep "UDP " | wc -l`
tcp4=`$DNSTAPREAD dnstap.out | grep "TCP " | wc -l`
aq4=`$DNSTAPREAD dnstap.out | grep "AQ " | wc -l`
ar4=`$DNSTAPREAD dnstap.out | grep "AR " | wc -l`
cq4=`$DNSTAPREAD dnstap.out | grep "CQ " | wc -l`
cr4=`$DNSTAPREAD dnstap.out | grep "CR " | wc -l`
rq4=`$DNSTAPREAD dnstap.out | grep "RQ " | wc -l`
rr4=`$DNSTAPREAD dnstap.out | grep "RR " | wc -l`
uq4=`$DNSTAPREAD dnstap.out | grep "UQ " | wc -l`
ur4=`$DNSTAPREAD dnstap.out | grep "UR " | wc -l`
echo_i "checking UDP message counts"
ret=0
[ $udp4 -eq 2 ] || {
echo_i "ns4 $udp4 expected 2"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking TCP message counts"
ret=0
[ $tcp4 -eq 0 ] || {
echo_i "ns4 $tcp4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking AUTH_QUERY message counts"
ret=0
[ $aq4 -eq 0 ] || {
echo_i "ns4 $aq4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking AUTH_RESPONSE message counts"
ret=0
[ $ar4 -eq 0 ] || {
echo_i "ns4 $ar4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking CLIENT_QUERY message counts"
ret=0
[ $cq4 -eq 1 ] || {
echo_i "ns4 $cq4 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking CLIENT_RESPONSE message counts"
ret=0
[ $cr4 -eq 1 ] || {
echo_i "ns4 $cr4 expected 1"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking RESOLVER_QUERY message counts"
ret=0
[ $rq4 -eq 0 ] || {
echo_i "ns4 $rq4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking RESOLVER_RESPONSE message counts"
ret=0
[ $rr4 -eq 0 ] || {
echo_i "ns4 $rr4 expected 0"
ret=1
}
echo_i "checking UPDATE_QUERY message counts"
ret=0
[ $uq4 -eq 0 ] || {
echo_i "ns4 $uq4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking UPDATE_RESPONSE message counts"
ret=0
[ $ur4 -eq 0 ] || {
echo_i "ns4 $ur4 expected 0"
ret=1
}
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
fi
echo_i "checking large packet printing"
ret=0
# Expect one occurrence of "opcode: QUERY" below "reponse_message_data" and
# another one below "response_message".
lines=`$DNSTAPREAD -y large-answer.fstrm | grep -c "opcode: QUERY"`
[ $lines -eq 2 ] || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
test_dnstap_roll() (
ip="$1"
ns="$2"
n="$3"
$RNDCCMD -s "${ip}" dnstap -roll "${n}" | sed "s/^/${ns} /" | cat_i &&
files=$(find "$ns" -name "dnstap.out.[0-9]" | wc -l) &&
test "$files" -le "${n}" && test "$files" -ge "1"
)
echo_i "checking 'rndc -roll <value>' (no versions)"
ret=0
start_server --noclean --restart --port "${PORT}" dnstap ns3
_repeat 5 test_dnstap_roll 10.53.0.3 ns3 3 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=$((status+ret))
echo_i "checking 'rndc -roll <value>' (versions)"
ret=0
start_server --noclean --restart --port "${PORT}" dnstap ns2
_repeat 5 test_dnstap_roll 10.53.0.2 ns2 3 || ret=1
if [ $ret != 0 ]; then echo_i "failed"; fi
status=$((status+ret))
echo_i "exit status: $status"
[ "$status" -eq 0 ] || exit 1
Reference in New Issue View Git Blame Copy Permalink