2
0
mirror of https://github.com/checkpoint-restore/criu synced 2025-08-23 10:28:05 +00:00
criu/libnetlink.c

145 lines
2.9 KiB
C
Raw Normal View History

Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
#include <linux/types.h>
#include <sys/socket.h>
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
#include <linux/netlink.h>
#include <linux/rtnetlink.h>
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
#include <string.h>
#include <unistd.h>
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
#include "libnetlink.h"
#include "util.h"
int parse_rtattr(struct rtattr *tb[], int max, struct rtattr *rta, int len)
{
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
memset(tb, 0, sizeof(struct rtattr *) * (max + 1));
while (RTA_OK(rta, len)) {
if ((rta->rta_type <= max) && (!tb[rta->rta_type]))
tb[rta->rta_type] = rta;
rta = RTA_NEXT(rta, len);
}
if (len)
pr_warn("Trimmed RTA: len %d, rta_len %d\n", len, rta->rta_len);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return 0;
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
static int nlmsg_receive(char *buf, int len, int (*cb)(struct nlmsghdr *, void *), void *arg)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
struct nlmsghdr *hdr;
for (hdr = (struct nlmsghdr *)buf; NLMSG_OK(hdr, len); hdr = NLMSG_NEXT(hdr, len)) {
if (hdr->nlmsg_seq != CR_NLMSG_SEQ)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
continue;
if (hdr->nlmsg_type == NLMSG_DONE) {
int *len = (int *)NLMSG_DATA(hdr);
if (*len < 0) {
pr_err("ERROR %d reported by netlink (%s)\n",
*len, strerror(-*len));
return *len;
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return 0;
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (hdr->nlmsg_type == NLMSG_ERROR) {
struct nlmsgerr *err = (struct nlmsgerr *)NLMSG_DATA(hdr);
if (hdr->nlmsg_len - sizeof(*hdr) < sizeof(struct nlmsgerr)) {
pr_err("ERROR truncated\n");
return -1;
}
if (err->error == 0)
return 0;
pr_warn("ERROR %d reported by netlink\n", err->error);
return err->error;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
if (cb(hdr, arg))
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return -1;
}
return 1;
}
int do_rtnl_req(int nl, void *req, int size,
int (*receive_callback)(struct nlmsghdr *h, void *), void *arg)
{
struct msghdr msg;
struct sockaddr_nl nladdr;
struct iovec iov;
static char buf[4096];
int err;
memset(&msg, 0, sizeof(msg));
msg.msg_name = &nladdr;
msg.msg_namelen = sizeof(nladdr);
msg.msg_iov = &iov;
msg.msg_iovlen = 1;
memset(&nladdr, 0, sizeof(nladdr));
nladdr.nl_family = AF_NETLINK;
iov.iov_base = req;
iov.iov_len = size;
if (sendmsg(nl, &msg, 0) < 0) {
err = -errno;
pr_perror("Can't send request message");
goto err;
}
iov.iov_base = buf;
iov.iov_len = sizeof(buf);
while (1) {
memset(&msg, 0, sizeof(msg));
msg.msg_name = &nladdr;
msg.msg_namelen = sizeof(nladdr);
msg.msg_iov = &iov;
msg.msg_iovlen = 1;
err = recvmsg(nl, &msg, 0);
if (err < 0) {
if (errno == EINTR)
continue;
else {
err = -errno;
pr_perror("Error receiving nl report");
goto err;
}
}
if (err == 0)
break;
err = nlmsg_receive(buf, err, receive_callback, arg);
if (err < 0)
goto err;
if (err == 0)
break;
}
return 0;
err:
return err;
}
int addattr_l(struct nlmsghdr *n, int maxlen, int type, const void *data,
int alen)
{
int len = RTA_LENGTH(alen);
struct rtattr *rta;
if (NLMSG_ALIGN(n->nlmsg_len) + RTA_ALIGN(len) > maxlen) {
pr_err("addattr_l ERROR: message exceeded bound of %d\n", maxlen);
return -1;
}
rta = NLMSG_TAIL(n);
rta->rta_type = type;
rta->rta_len = len;
memcpy(RTA_DATA(rta), data, alen);
n->nlmsg_len = NLMSG_ALIGN(n->nlmsg_len) + RTA_ALIGN(len);
return 0;
}