2
0
mirror of https://github.com/checkpoint-restore/criu synced 2025-08-22 18:07:57 +00:00
criu/sockets.c

1485 lines
31 KiB
C
Raw Normal View History

#include <sys/socket.h>
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
#include <linux/netlink.h>
#include <linux/types.h>
#include <linux/net.h>
#include <sys/types.h>
#include <sys/vfs.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <netinet/tcp.h>
#include <errno.h>
#include <unistd.h>
#include <limits.h>
#include <arpa/inet.h>
#include <sys/sendfile.h>
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
#include "types.h"
#include "libnetlink.h"
#include "sockets.h"
#include "sk-queue.h"
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
#include "unix_diag.h"
#include "image.h"
#include "crtools.h"
#include "util.h"
#include "inet_diag.h"
#include "files.h"
#include "util-net.h"
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
static char buf[4096];
#ifndef NETLINK_SOCK_DIAG
#define NETLINK_SOCK_DIAG NETLINK_INET_DIAG
#endif
#ifndef SOCK_DIAG_BY_FAMILY
#define SOCK_DIAG_BY_FAMILY 20
#endif
#ifndef SOCKFS_MAGIC
#define SOCKFS_MAGIC 0x534F434B
#endif
struct socket_desc {
unsigned int family;
unsigned int ino;
struct socket_desc *next;
int already_dumped;
bool external;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
};
struct unix_sk_desc {
struct socket_desc sd;
unsigned int type;
unsigned int state;
unsigned int peer_ino;
unsigned int rqlen;
unsigned int wqlen;
unsigned int namelen;
char *name;
unsigned int nr_icons;
unsigned int *icons;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
};
struct unix_sk_listen_icon {
unsigned int peer_ino;
struct unix_sk_desc *sk_desc;
struct unix_sk_listen_icon *next;
};
#define INET_ADDR_LEN 40
struct inet_sk_desc {
struct socket_desc sd;
unsigned int type;
unsigned int proto;
unsigned int src_port;
unsigned int dst_port;
unsigned int state;
unsigned int rqlen;
unsigned int wqlen;
unsigned int src_addr[4];
unsigned int dst_addr[4];
};
#define SK_HASH_SIZE 32
#define SK_HASH_LINK(head, key, elem) \
do { \
(elem)->next = (head)[(key) % SK_HASH_SIZE]; \
(head)[(key) % SK_HASH_SIZE] = (elem); \
} while (0)
#define __gen_static_lookup_func(ret, name, head, _member, _type, _name)\
static ret *name(_type _name) { \
ret *d; \
for (d = head[_name % SK_HASH_SIZE]; d; d = d->next) { \
if (d->_member == _name) \
break; \
} \
return d; \
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
static struct socket_desc *sockets[SK_HASH_SIZE];
__gen_static_lookup_func(struct socket_desc, lookup_socket, sockets,
ino, int, ino);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
static struct unix_sk_listen_icon *unix_listen_icons[SK_HASH_SIZE];
__gen_static_lookup_func(struct unix_sk_listen_icon,
lookup_unix_listen_icons,
unix_listen_icons,
peer_ino, unsigned int, ino);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
static int sk_collect_one(int ino, int family, struct socket_desc *d)
{
d->ino = ino;
d->family = family;
SK_HASH_LINK(sockets, ino, d);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return 0;
}
static void show_one_inet(const char *act, const struct inet_sk_desc *sk)
{
char src_addr[INET_ADDR_LEN] = "<unknown>";
if (inet_ntop(sk->sd.family, (void *)sk->src_addr, src_addr,
INET_ADDR_LEN) == NULL) {
pr_perror("Failed to translate address");
}
pr_debug("\t%s: ino 0x%8x family %4d type %4d port %8d "
"state %2d src_addr %s\n",
act, sk->sd.ino, sk->sd.family, sk->type, sk->src_port,
sk->state, src_addr);
}
static void show_one_inet_img(const char *act, const struct inet_sk_entry *e)
{
char src_addr[INET_ADDR_LEN] = "<unknown>";
if (inet_ntop(e->family, (void *)e->src_addr, src_addr,
INET_ADDR_LEN) == NULL) {
pr_perror("Failed to translate address");
}
pr_debug("\t%s: family %d type %d proto %d port %d "
"state %d src_addr %s\n",
act, e->family, e->type, e->proto, e->src_port,
e->state, src_addr);
}
static void show_one_unix(char *act, const struct unix_sk_desc *sk)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
pr_debug("\t%s: ino 0x%8x family %4d type %4d state %2d name %s\n",
act, sk->sd.ino, sk->sd.family, sk->type, sk->state, sk->name);
if (sk->nr_icons) {
int i;
for (i = 0; i < sk->nr_icons; i++)
pr_debug("\t\ticon: %4d\n", sk->icons[i]);
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
static void show_one_unix_img(const char *act, const struct unix_sk_entry *e)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
pr_info("\t%s: id %u type %d state %d name %d bytes\n",
act, e->id, e->type, e->state, e->namelen);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
static int can_dump_inet_sk(const struct inet_sk_desc *sk)
{
if (sk->sd.family != AF_INET && sk->sd.family != AF_INET6) {
pr_err("Only IPv4/6 sockets for now\n");
return 0;
}
if (sk->type == SOCK_DGRAM)
return 1;
if (sk->type != SOCK_STREAM) {
pr_err("Only stream and dgram inet sockets for now\n");
return 0;
}
switch (sk->state) {
case TCP_LISTEN:
if (sk->rqlen != 0) {
/*
* Currently the ICONS nla reports the conn
* requests for listen sockets. Need to pick
* those up and fix the connect job respectively
*/
pr_err("In-flight connection (l)\n");
return 0;
}
break;
default:
pr_err("Unknown state %d\n", sk->state);
return 0;
}
return 1;
}
static int dump_one_inet(struct socket_desc *_sk, struct fd_parms *p,
const struct cr_fdset *cr_fdset)
{
struct inet_sk_desc *sk = (struct inet_sk_desc *)_sk;
struct inet_sk_entry ie;
struct fdinfo_entry fe;
if (!can_dump_inet_sk(sk))
goto err;
fe.fd = p->fd;
fe.type = FDINFO_INETSK;
fe.id = sk->sd.ino;
fe.flags = p->fd_flags;
if (write_img(fdset_fd(cr_fdset, CR_FD_FDINFO), &fe))
goto err;
if (sk->sd.already_dumped)
return 0;
memset(&ie, 0, sizeof(ie));
ie.id = sk->sd.ino;
ie.family = sk->sd.family;
ie.type = sk->type;
ie.proto = sk->proto;
ie.state = sk->state;
ie.src_port = sk->src_port;
ie.dst_port = sk->dst_port;
ie.backlog = sk->wqlen;
ie.flags = p->flags;
ie.fown = p->fown;
memcpy(ie.src_addr, sk->src_addr, sizeof(u32) * 4);
memcpy(ie.dst_addr, sk->dst_addr, sizeof(u32) * 4);
if (write_img(fdset_fd(glob_fdset, CR_FD_INETSK), &ie))
goto err;
pr_info("Dumping inet socket at %d\n", p->fd);
show_one_inet("Dumping", sk);
show_one_inet_img("Dumped", &ie);
sk->sd.already_dumped = 1;
return 0;
err:
return -1;
}
static int can_dump_unix_sk(const struct unix_sk_desc *sk)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
if (sk->type != SOCK_STREAM &&
sk->type != SOCK_DGRAM) {
pr_err("Only stream/dgram sockets for now\n");
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return 0;
}
switch (sk->state) {
case TCP_LISTEN:
break;
case TCP_ESTABLISHED:
break;
case TCP_CLOSE:
if (sk->type != SOCK_DGRAM)
return 0;
break;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
default:
pr_err("Unknown state %d\n", sk->state);
return 0;
}
return 1;
}
static int dump_one_unix(const struct socket_desc *_sk, struct fd_parms *p,
int lfd, const struct cr_fdset *cr_fdset)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
struct unix_sk_desc *sk = (struct unix_sk_desc *)_sk;
struct fdinfo_entry fe;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
struct unix_sk_entry ue;
if (!can_dump_unix_sk(sk))
goto err;
fe.fd = p->fd;
fe.type = FDINFO_UNIXSK;
fe.id = sk->sd.ino;
fe.flags = p->fd_flags;
if (write_img(fdset_fd(cr_fdset, CR_FD_FDINFO), &fe))
goto err;
if (sk->sd.already_dumped)
return 0;
ue.id = sk->sd.ino;
ue.type = sk->type;
ue.state = sk->state;
ue.namelen = sk->namelen;
ue.flags = p->flags;
ue.backlog = sk->wqlen;
ue.peer = sk->peer_ino;
ue.fown = p->fown;
ue.uflags = 0;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (ue.peer) {
struct unix_sk_desc *peer;
peer = (struct unix_sk_desc *)lookup_socket(ue.peer);
if (!peer) {
pr_err("Unix socket 0x%x without peer 0x%x\n",
ue.id, ue.peer);
goto err;
}
/*
* Peer should have us as peer or have a name by which
* we can access one.
*/
if (peer->peer_ino != ue.id) {
if (!peer->name) {
pr_err("Unix socket 0x%x with unreachable peer 0x%x (0x%x/%s)\n",
ue.id, ue.peer, peer->peer_ino, peer->name);
goto err;
}
/*
* It can be external socket, so we defer dumping
* until all sockets the program owns are processed.
*/
peer->sd.external = true;
}
} else if (ue.state == TCP_ESTABLISHED) {
const struct unix_sk_listen_icon *e;
/*
* If this is in-flight connection we need to figure
* out where to connect it on restore. Thus, tune up peer
* id by searching an existing listening socket.
*
* Note the socket name will be found at restore stage,
* not now, just to reduce size of dump files.
*/
e = lookup_unix_listen_icons(ue.id);
if (!e) {
pr_err("Dangling in-flight connection %d\n", ue.id);
goto err;
}
/* e->sk_desc is _never_ NULL */
if (e->sk_desc->state != TCP_LISTEN) {
pr_err("In-flight connection on "
"non-listening socket %d\n", ue.id);
goto err;
}
ue.peer = e->sk_desc->sd.ino;
pr_debug("\t\tFixed inflight socket 0x%x peer 0x%x)\n",
ue.id, ue.peer);
}
if (write_img(fdset_fd(glob_fdset, CR_FD_UNIXSK), &ue))
goto err;
if (write_img_buf(fdset_fd(glob_fdset, CR_FD_UNIXSK), sk->name, ue.namelen))
goto err;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (sk->rqlen != 0 && !(sk->type == SOCK_STREAM &&
sk->state == TCP_LISTEN))
if (dump_sk_queue(lfd, ue.id))
goto err;
pr_info("Dumping unix socket at %d\n", p->fd);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
show_one_unix("Dumping", sk);
show_one_unix_img("Dumped", &ue);
sk->sd.already_dumped = 1;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return 0;
err:
return -1;
}
int dump_socket(struct fd_parms *p, int lfd, const struct cr_fdset *cr_fdset)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
struct socket_desc *sk;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
sk = lookup_socket(p->stat.st_ino);
if (!sk) {
pr_err("Uncollected socket 0x%8x\n", (int)p->stat.st_ino);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return -1;
}
switch (sk->family) {
case AF_UNIX:
return dump_one_unix(sk, p, lfd, cr_fdset);
case AF_INET:
case AF_INET6:
return dump_one_inet(sk, p, cr_fdset);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
default:
pr_err("BUG! Unknown socket collected\n");
break;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
return -1;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
static int inet_collect_one(struct nlmsghdr *h, int family, int type, int proto)
{
struct inet_sk_desc *d;
struct inet_diag_msg *m = NLMSG_DATA(h);
struct rtattr *tb[INET_DIAG_MAX+1];
int ret;
parse_rtattr(tb, INET_DIAG_MAX, (struct rtattr *)(m + 1),
h->nlmsg_len - NLMSG_LENGTH(sizeof(*m)));
d = xzalloc(sizeof(*d));
if (!d)
return -1;
d->type = type;
d->proto = proto;
d->src_port = ntohs(m->id.idiag_sport);
d->dst_port = ntohs(m->id.idiag_dport);
d->state = m->idiag_state;
d->rqlen = m->idiag_rqueue;
d->wqlen = m->idiag_wqueue;
memcpy(d->src_addr, m->id.idiag_src, sizeof(u32) * 4);
memcpy(d->dst_addr, m->id.idiag_dst, sizeof(u32) * 4);
ret = sk_collect_one(m->idiag_inode, family, &d->sd);
show_one_inet("Collected", d);
return ret;
}
static int inet_tcp_receive_one(struct nlmsghdr *h)
{
return inet_collect_one(h, AF_INET, SOCK_STREAM, IPPROTO_TCP);
}
static int inet_udp_receive_one(struct nlmsghdr *h)
{
return inet_collect_one(h, AF_INET, SOCK_DGRAM, IPPROTO_UDP);
}
static int inet_udplite_receive_one(struct nlmsghdr *h)
{
return inet_collect_one(h, AF_INET, SOCK_DGRAM, IPPROTO_UDPLITE);
}
static int inet6_tcp_receive_one(struct nlmsghdr *h)
{
return inet_collect_one(h, AF_INET6, SOCK_STREAM, IPPROTO_TCP);
}
static int inet6_udp_receive_one(struct nlmsghdr *h)
{
return inet_collect_one(h, AF_INET6, SOCK_DGRAM, IPPROTO_UDP);
}
static int inet6_udplite_receive_one(struct nlmsghdr *h)
{
return inet_collect_one(h, AF_INET6, SOCK_DGRAM, IPPROTO_UDPLITE);
}
static int unix_collect_one(const struct unix_diag_msg *m,
struct rtattr **tb)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
struct unix_sk_desc *d, **h;
d = xzalloc(sizeof(*d));
if (!d)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return -1;
d->type = m->udiag_type;
d->state= m->udiag_state;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (tb[UNIX_DIAG_PEER])
d->peer_ino = *(int *)RTA_DATA(tb[UNIX_DIAG_PEER]);
if (tb[UNIX_DIAG_NAME]) {
int len = RTA_PAYLOAD(tb[UNIX_DIAG_NAME]);
char *name = xmalloc(len + 1);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (!name)
goto err;
memcpy(name, RTA_DATA(tb[UNIX_DIAG_NAME]), len);
name[len] = '\0';
if (name[0] != '\0') {
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
struct unix_diag_vfs *uv;
struct stat st;
if (name[0] != '/') {
pr_warn("Relative bind path '%s' "
"unsupported\n", name);
xfree(name);
xfree(d);
return 0;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
if (!tb[UNIX_DIAG_VFS]) {
pr_err("Bound socket w/o inode %d\n",
m->udiag_ino);
goto err;
}
uv = RTA_DATA(tb[UNIX_DIAG_VFS]);
if (stat(name, &st)) {
pr_perror("Can't stat socket %d(%s)",
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
m->udiag_ino, name);
goto err;
}
if ((st.st_ino != uv->udiag_vfs_ino) ||
(st.st_dev != kdev_to_odev(uv->udiag_vfs_dev))) {
pr_info("unix: Dropping path for "
"unlinked bound "
"sk 0x%x.0x%x real 0x%x.0x%x\n",
(int)st.st_dev,
(int)st.st_ino,
(int)uv->udiag_vfs_dev,
(int)uv->udiag_vfs_ino);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
/*
* When a socket is bound to unlinked file, we
* just drop his name, since noone will access
* it via one.
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
*/
xfree(name);
len = 0;
name = NULL;
}
}
d->namelen = len;
d->name = name;
}
if (tb[UNIX_DIAG_ICONS]) {
int len = RTA_PAYLOAD(tb[UNIX_DIAG_ICONS]);
int i;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
d->icons = xmalloc(len);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (!d->icons)
goto err;
memcpy(d->icons, RTA_DATA(tb[UNIX_DIAG_ICONS]), len);
d->nr_icons = len / sizeof(u32);
/*
* Remember these sockets, we will need them
* to fix up in-flight sockets peers.
*/
for (i = 0; i < d->nr_icons; i++) {
struct unix_sk_listen_icon *e;
int n;
e = xzalloc(sizeof(*e));
if (!e)
goto err;
SK_HASH_LINK(unix_listen_icons, d->icons[i], e);
pr_debug("\t\tCollected icon %d\n", d->icons[i]);
e->peer_ino = d->icons[i];
e->sk_desc = d;
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
if (tb[UNIX_DIAG_RQLEN]) {
struct unix_diag_rqlen *rq;
rq = (struct unix_diag_rqlen *)RTA_DATA(tb[UNIX_DIAG_RQLEN]);
d->rqlen = rq->udiag_rqueue;
d->wqlen = rq->udiag_wqueue;
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
sk_collect_one(m->udiag_ino, AF_UNIX, &d->sd);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
show_one_unix("Collected", d);
return 0;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
err:
xfree(d->icons);
xfree(d->name);
xfree(d);
return -1;
}
static int unix_receive_one(struct nlmsghdr *h)
{
struct unix_diag_msg *m = NLMSG_DATA(h);
struct rtattr *tb[UNIX_DIAG_MAX+1];
parse_rtattr(tb, UNIX_DIAG_MAX, (struct rtattr *)(m + 1),
h->nlmsg_len - NLMSG_LENGTH(sizeof(*m)));
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return unix_collect_one(m, tb);
}
static int collect_sockets_nl(int nl, void *req, int size,
int (*receive_callback)(struct nlmsghdr *h))
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
struct msghdr msg;
struct sockaddr_nl nladdr;
struct iovec iov;
memset(&msg, 0, sizeof(msg));
msg.msg_name = &nladdr;
msg.msg_namelen = sizeof(nladdr);
msg.msg_iov = &iov;
msg.msg_iovlen = 1;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
memset(&nladdr, 0, sizeof(nladdr));
nladdr.nl_family= AF_NETLINK;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
iov.iov_base = req;
iov.iov_len = size;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (sendmsg(nl, &msg, 0) < 0) {
pr_perror("Can't send request message");
goto err;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
iov.iov_base = buf;
iov.iov_len = sizeof(buf);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
while (1) {
int err;
memset(&msg, 0, sizeof(msg));
msg.msg_name = &nladdr;
msg.msg_namelen = sizeof(nladdr);
msg.msg_iov = &iov;
msg.msg_iovlen = 1;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
err = recvmsg(nl, &msg, 0);
if (err < 0) {
if (errno == EINTR)
continue;
else {
pr_perror("Error receiving nl report");
goto err;
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
if (err == 0)
break;
err = nlmsg_receive(buf, err, receive_callback);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (err < 0)
goto err;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
if (err == 0)
break;
}
return 0;
err:
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return -1;
}
int dump_external_sockets(void)
{
struct socket_desc *head, *sd;
int i, ret = -1;
if (!opts.ext_unix_sk)
return 0;
pr_debug("Dumping external sockets\n");
for (i = 0; i < SK_HASH_SIZE; i++) {
head = sockets[i];
if (!head)
continue;
for (sd = head; sd; sd = sd->next) {
struct unix_sk_entry e = { };
struct unix_sk_desc *sk;
if (sd->already_dumped ||
sd->external == false ||
sd->family != AF_UNIX)
continue;
sk = container_of(sd, struct unix_sk_desc, sd);
if (sk->type != SOCK_DGRAM)
continue;
e.id = sd->ino;
e.type = SOCK_DGRAM;
e.state = TCP_LISTEN;
e.namelen = sk->namelen;
e.uflags = USK_EXTERN;
e.peer = 0;
show_one_unix("Dumping extern", sk);
if (write_img(fdset_fd(glob_fdset, CR_FD_UNIXSK), &e))
goto err;
if (write_img_buf(fdset_fd(glob_fdset, CR_FD_UNIXSK),
sk->name, e.namelen))
goto err;
show_one_unix_img("Dumped extern", &e);
sd->already_dumped = 1;
}
}
return 0;
err:
return -1;
}
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
int collect_sockets(void)
{
int err = 0, tmp;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
int nl;
int supp_type = 0;
struct {
struct nlmsghdr hdr;
union {
struct unix_diag_req u;
struct inet_diag_req_v2 i;
} r;
} req;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
nl = socket(PF_NETLINK, SOCK_RAW, NETLINK_SOCK_DIAG);
if (nl < 0) {
pr_perror("Can't create sock diag socket");
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return -1;
}
memset(&req, 0, sizeof(req));
req.hdr.nlmsg_len = sizeof(req);
req.hdr.nlmsg_type = SOCK_DIAG_BY_FAMILY;
req.hdr.nlmsg_flags = NLM_F_DUMP | NLM_F_REQUEST;
req.hdr.nlmsg_seq = CR_NLMSG_SEQ;
/* Collect UNIX sockets */
req.r.u.sdiag_family = AF_UNIX;
req.r.u.udiag_states = -1; /* All */
req.r.u.udiag_show = UDIAG_SHOW_NAME | UDIAG_SHOW_VFS |
UDIAG_SHOW_PEER | UDIAG_SHOW_ICONS |
UDIAG_SHOW_RQLEN;
tmp = collect_sockets_nl(nl, &req, sizeof(req), unix_receive_one);
if (tmp)
err = tmp;
/* Collect IPv4 TCP sockets */
req.r.i.sdiag_family = AF_INET;
req.r.i.sdiag_protocol = IPPROTO_TCP;
req.r.i.idiag_ext = 0;
/* Only listening sockets supported yet */
req.r.i.idiag_states = 1 << TCP_LISTEN;
tmp = collect_sockets_nl(nl, &req, sizeof(req), inet_tcp_receive_one);
if (tmp)
err = tmp;
/* Collect IPv4 UDP sockets */
req.r.i.sdiag_family = AF_INET;
req.r.i.sdiag_protocol = IPPROTO_UDP;
req.r.i.idiag_ext = 0;
req.r.i.idiag_states = -1; /* All */
tmp = collect_sockets_nl(nl, &req, sizeof(req), inet_udp_receive_one);
if (tmp)
err = tmp;
/* Collect IPv4 UDP-lite sockets */
req.r.i.sdiag_family = AF_INET;
req.r.i.sdiag_protocol = IPPROTO_UDPLITE;
req.r.i.idiag_ext = 0;
req.r.i.idiag_states = -1; /* All */
tmp = collect_sockets_nl(nl, &req, sizeof(req), inet_udplite_receive_one);
if (tmp)
err = tmp;
/* Collect IPv6 TCP sockets */
req.r.i.sdiag_family = AF_INET6;
req.r.i.sdiag_protocol = IPPROTO_TCP;
req.r.i.idiag_ext = 0;
/* Only listening sockets supported yet */
req.r.i.idiag_states = 1 << TCP_LISTEN;
tmp = collect_sockets_nl(nl, &req, sizeof(req), inet6_tcp_receive_one);
if (tmp)
err = tmp;
/* Collect IPv6 UDP sockets */
req.r.i.sdiag_family = AF_INET6;
req.r.i.sdiag_protocol = IPPROTO_UDP;
req.r.i.idiag_ext = 0;
req.r.i.idiag_states = -1; /* All */
tmp = collect_sockets_nl(nl, &req, sizeof(req), inet6_udp_receive_one);
if (tmp)
err = tmp;
/* Collect IPv6 UDP-lite sockets */
req.r.i.sdiag_family = AF_INET6;
req.r.i.sdiag_protocol = IPPROTO_UDPLITE;
req.r.i.idiag_ext = 0;
req.r.i.idiag_states = -1; /* All */
tmp = collect_sockets_nl(nl, &req, sizeof(req), inet6_udplite_receive_one);
if (tmp)
err = tmp;
out:
close(nl);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
return err;
}
struct unix_sk_info {
struct unix_sk_entry ue;
struct list_head list;
char *name;
unsigned flags;
struct unix_sk_info *peer;
struct file_desc d;
};
#define USK_PAIR_MASTER 0x1
#define USK_PAIR_SLAVE 0x2
static LIST_HEAD(unix_sockets);
static struct unix_sk_info *find_unix_sk(int id)
{
struct file_desc *d;
d = find_file_desc_raw(FDINFO_UNIXSK, id);
if (d)
return container_of(d, struct unix_sk_info, d);
return NULL;
}
struct inet_sk_info {
struct inet_sk_entry ie;
struct file_desc d;
};
static int open_inet_sk(struct file_desc *d);
static struct file_desc_ops inet_desc_ops = {
.open = open_inet_sk,
};
int collect_inet_sockets(void)
{
struct inet_sk_info *ii = NULL;
int fd, ret = -1;
fd = open_image_ro(CR_FD_INETSK);
if (fd < 0)
return -1;
while (1) {
ii = xmalloc(sizeof(*ii));
ret = -1;
if (!ii)
break;
ret = read_img_eof(fd, &ii->ie);
if (ret <= 0)
break;
file_desc_add(&ii->d, FDINFO_INETSK, ii->ie.id,
&inet_desc_ops);
}
if (ii)
xfree(ii);
close(fd);
return 0;
}
static int open_inet_sk(struct file_desc *d)
{
union {
struct sockaddr_in v4;
struct sockaddr_in6 v6;
} addr;
struct inet_sk_info *ii;
int sk, addr_size;
ii = container_of(d, struct inet_sk_info, d);
show_one_inet_img("Restore", &ii->ie);
if (ii->ie.family != AF_INET && ii->ie.family != AF_INET6) {
pr_err("Unsupported socket family: %d\n", ii->ie.family);
return -1;
}
if ((ii->ie.type != SOCK_STREAM) && (ii->ie.type != SOCK_DGRAM)) {
pr_err("Unsupported socket type: %d\n", ii->ie.type);
return -1;
}
sk = socket(ii->ie.family, ii->ie.type, ii->ie.proto);
if (sk < 0) {
pr_perror("Can't create unix socket");
return -1;
}
if (restore_fown(sk, &ii->ie.fown))
goto err;
/*
* Listen sockets are easiest ones -- simply
* bind() and listen(), and that's all.
*/
memzero(&addr, sizeof(addr));
if (ii->ie.family == AF_INET) {
addr.v4.sin_family = ii->ie.family;
addr.v4.sin_port = htons(ii->ie.src_port);
memcpy(&addr.v4.sin_addr.s_addr, ii->ie.src_addr, sizeof(ii->ie.src_addr));
addr_size = sizeof(addr.v4);
} else if (ii->ie.family == AF_INET6) {
addr.v6.sin6_family = ii->ie.family;
addr.v6.sin6_port = htons(ii->ie.src_port);
memcpy(&addr.v6.sin6_addr.s6_addr, ii->ie.src_addr, sizeof(ii->ie.src_addr));
addr_size = sizeof(addr.v6);
} else
BUG_ON(1);
if (bind(sk, (struct sockaddr *)&addr, addr_size) == -1) {
pr_perror("Can't bind to a socket");
goto err;
}
if (ii->ie.state == TCP_LISTEN) {
if (ii->ie.proto != IPPROTO_TCP) {
pr_err("Wrong socket in listen state %d\n", ii->ie.proto);
goto err;
}
if (listen(sk, ii->ie.backlog) == -1) {
pr_perror("Can't listen on a socket");
goto err;
}
}
if (ii->ie.state == TCP_ESTABLISHED) {
if (ii->ie.proto == IPPROTO_TCP) {
pr_err("Connected TCP socket in image\n");
goto err;
}
memzero(&addr, sizeof(addr));
if (ii->ie.family == AF_INET) {
addr.v4.sin_family = ii->ie.family;
addr.v4.sin_port = htons(ii->ie.dst_port);
memcpy(&addr.v4.sin_addr.s_addr, ii->ie.dst_addr, sizeof(ii->ie.dst_addr));
addr_size = sizeof(addr.v4);
} else if (ii->ie.family == AF_INET6) {
addr.v6.sin6_family = ii->ie.family;
addr.v6.sin6_port = htons(ii->ie.dst_port);
memcpy(&addr.v6.sin6_addr.s6_addr, ii->ie.dst_addr, sizeof(ii->ie.dst_addr));
addr_size = sizeof(addr.v6);
} else
BUG_ON(1);
if (connect(sk, (struct sockaddr *)&addr, addr_size) == -1) {
pr_perror("Can't connect UDP socket back");
goto err;
}
}
if (set_fd_flags(sk, ii->ie.flags))
return -1;
return sk;
err:
close(sk);
return -1;
}
static inline char *unknown(u32 val)
{
static char unk[12];
snprintf(unk, sizeof(unk), "x%d", val);
return unk;
}
static inline char *skfamily2s(u32 f)
{
if (f == AF_INET)
return " inet";
else if (f == AF_INET6)
return "inet6";
else
return unknown(f);
}
static inline char *sktype2s(u32 t)
{
if (t == SOCK_STREAM)
return "stream";
else if (t == SOCK_DGRAM)
return " dgram";
else
return unknown(t);
}
static inline char *skproto2s(u32 p)
{
if (p == IPPROTO_UDP)
return "udp";
else if (p == IPPROTO_UDPLITE)
return "udpl";
else if (p == IPPROTO_TCP)
return "tcp";
else
return unknown(p);
}
static inline char *skstate2s(u32 state)
{
if (state == TCP_ESTABLISHED)
return " estab";
else if (state == TCP_CLOSE)
return "closed";
else if (state == TCP_LISTEN)
return "listen";
else
return unknown(state);
}
void show_inetsk(int fd, struct cr_options *o)
{
struct inet_sk_entry ie;
int ret = 0;
pr_img_head(CR_FD_INETSK);
while (1) {
char src_addr[INET_ADDR_LEN] = "<unknown>";
char dst_addr[INET_ADDR_LEN] = "<unknown>";
ret = read_img_eof(fd, &ie);
if (ret <= 0)
goto out;
if (inet_ntop(ie.family, (void *)ie.src_addr, src_addr,
INET_ADDR_LEN) == NULL) {
pr_perror("Failed to translate src address");
}
if (ie.state == TCP_ESTABLISHED) {
if (inet_ntop(ie.family, (void *)ie.dst_addr, dst_addr,
INET_ADDR_LEN) == NULL) {
pr_perror("Failed to translate dst address");
}
}
pr_msg("id 0x%x family %s type %s proto %s state %s %s:%d <-> %s:%d flags 0x%2x\n",
ie.id, skfamily2s(ie.family), sktype2s(ie.type), skproto2s(ie.proto),
skstate2s(ie.state), src_addr, ie.src_port, dst_addr, ie.dst_port, ie.flags);
pr_msg("\t"), show_fown_cont(&ie.fown), pr_msg("\n");
}
out:
if (ret)
pr_info("\n");
pr_img_tail(CR_FD_INETSK);
}
void show_unixsk(int fd, struct cr_options *o)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
{
struct unix_sk_entry ue;
int ret = 0;
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
pr_img_head(CR_FD_UNIXSK);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
while (1) {
ret = read_img_eof(fd, &ue);
if (ret <= 0)
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
goto out;
pr_msg("id 0x%8x type %s state %s namelen %4d backlog %4d peer 0x%8x flags 0x%2x uflags 0x%2x",
ue.id, sktype2s(ue.type), skstate2s(ue.state),
ue.namelen, ue.backlog, ue.peer, ue.flags, ue.uflags);
if (ue.namelen) {
BUG_ON(ue.namelen > sizeof(buf));
ret = read_img_buf(fd, buf, ue.namelen);
if (ret < 0) {
pr_info("\n");
goto out;
}
if (!buf[0])
buf[0] = '@';
pr_msg(" --> %s\n", buf);
} else
pr_msg("\n");
pr_msg("\t"), show_fown_cont(&ue.fown), pr_msg("\n");
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
out:
pr_img_tail(CR_FD_UNIXSK);
Unix sockets initial support Currently it can only work with stream sockets, which have no skbs in queues (listening or established -- both work OK). The cpt part uses the sock_diag engine that was merged to Dave recently to collect sockets. Then it dumps sockets by checking the filesystem ID of a failed-to-open through /proc/pid/fd descriptors (sockets do not allow for such tricks with opens through proc) against SOCKFS_TYPE. The rst part is more tricky. Listen sockets are just restored, this is simple. Connected sockets are restored like this: 1. One end establishes a listening anon socket at the desired descriptor; 2. The other end just creates a socket at the desired descriptor; 3. All sockets, that are to be connect()-ed call connect. Unix sockets do not block connect() till the accept() time and thus we continue with... 4. ... all listening sockets call accept() and ... dup2 the new fd into the accepting end. There's a problem with this approach -- socket names are not preserved, but looking into our OpenVZ implementation I think this is OK for existing apps. What should be done next is: 1. Need to merge the file IDs patches in our tree and make Andrey to support files sharing. This will solve the sk = socket(); fork(); case. Currently it simply doesn't work :( 2. Need to add support for DGRAM sockets -- I wrote comment how to do it in the can_dump_unix_sk() 3. Need to add support for in-flight connections 4. Implement support for UDP sockets (quite simple) 5. Implement support for listening TCP sockets (also not very complex) 6. Implement support for connected TCP scokets (hard one, Tejun's patches are not very good for this from my POV) Cyrill, plz, apply this patch and put the above descriptions onto wiki docs (do we have the plans page yet?). Andrey, plz, take care of unix sockets tests in zdtm. Most likely it won't work till you do the shared files support for sockets. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
2011-12-26 22:12:03 +04:00
}
struct unix_conn_job {
struct unix_sk_info *sk;
struct unix_conn_job *next;
};
static struct unix_conn_job *conn_jobs;
static int schedule_conn_job(struct unix_sk_info *ui)
{
struct unix_conn_job *cj;
cj = xmalloc(sizeof(*cj));
if (!cj)
return -1;
cj->sk = ui;
cj->next = conn_jobs;
conn_jobs = cj;
return 0;
}
int run_unix_connections(void)
{
struct unix_conn_job *cj;
pr_info("Running delayed unix connections\n");
cj = conn_jobs;
while (cj) {
int attempts = 8;
struct unix_sk_info *ui = cj->sk;
struct unix_sk_info *peer = ui->peer;
struct fdinfo_list_entry *fle;
struct sockaddr_un addr;
pr_info("\tConnect 0x%x to 0x%x\n", ui->ue.id, peer->ue.id);
fle = file_master(&ui->d);
memset(&addr, 0, sizeof(addr));
addr.sun_family = AF_UNIX;
memcpy(&addr.sun_path, peer->name, peer->ue.namelen);
try_again:
if (connect(fle->fe.fd, (struct sockaddr *)&addr,
sizeof(addr.sun_family) +
peer->ue.namelen) < 0) {
if (attempts) {
usleep(1000);
attempts--;
goto try_again; /* FIXME use futex waiters */
}
pr_perror("Can't connect 0x%x socket", ui->ue.id);
return -1;
}
if (restore_sk_queue(fle->fe.fd, peer->ue.id))
return -1;
if (set_fd_flags(fle->fe.fd, ui->ue.flags))
return -1;
cj = cj->next;
}
return 0;
}
static int bind_unix_sk(int sk, struct unix_sk_info *ui)
{
struct sockaddr_un addr;
if ((ui->ue.type == SOCK_STREAM) && (ui->ue.state != TCP_LISTEN))
/*
* FIXME this can be done, but for doing this properly we
* need to bind socket to its name, then rename one to
* some temporary unique one and after all the sockets are
* restored we should walk those temp names and rename
* some of them back to real ones.
*/
goto done;
memset(&addr, 0, sizeof(addr));
addr.sun_family = AF_UNIX;
memcpy(&addr.sun_path, ui->name, ui->ue.namelen);
if (bind(sk, (struct sockaddr *)&addr,
sizeof(addr.sun_family) + ui->ue.namelen)) {
pr_perror("Can't bind socket");
return -1;
}
done:
return 0;
}
static int unixsk_should_open_transport(struct fdinfo_entry *fe,
struct file_desc *d)
{
struct unix_sk_info *ui;
ui = container_of(d, struct unix_sk_info, d);
return ui->flags & USK_PAIR_SLAVE;
}
static int open_unixsk_pair_master(struct unix_sk_info *ui)
{
int sk[2], tsk;
struct unix_sk_info *peer = ui->peer;
struct fdinfo_list_entry *fle;
pr_info("Opening pair master (id 0x%x peer 0x%x)\n",
ui->ue.id, ui->ue.peer);
if (socketpair(PF_UNIX, ui->ue.type, 0, sk) < 0) {
pr_perror("Can't make socketpair");
return -1;
}
if (restore_sk_queue(sk[0], peer->ue.id))
return -1;
if (restore_sk_queue(sk[1], ui->ue.id))
return -1;
if (set_fd_flags(sk[0], ui->ue.flags))
return -1;
if (set_fd_flags(sk[1], peer->ue.flags))
return -1;
if (restore_fown(sk[0], &ui->ue.fown))
return -1;
if (restore_fown(sk[1], &peer->ue.fown))
return -1;
if (bind_unix_sk(sk[0], ui))
return -1;
tsk = socket(PF_UNIX, SOCK_DGRAM, 0);
if (tsk < 0) {
pr_perror("Can't make transport socket");
return -1;
}
fle = file_master(&peer->d);
if (send_fd_to_peer(sk[1], fle, tsk)) {
pr_err("Can't send pair slave\n");
return -1;
}
close(tsk);
close(sk[1]);
return sk[0];
}
static int open_unixsk_pair_slave(struct unix_sk_info *ui)
{
struct fdinfo_list_entry *fle;
int sk;
fle = file_master(&ui->d);
pr_info("Opening pair slave (id 0x%x peer 0x%x) on %d\n",
ui->ue.id, ui->ue.peer, fle->fe.fd);
sk = recv_fd(fle->fe.fd);
if (sk < 0) {
pr_err("Can't recv pair slave");
return -1;
}
close(fle->fe.fd);
if (bind_unix_sk(sk, ui))
return -1;
return sk;
}
static int open_unixsk_standalone(struct unix_sk_info *ui)
{
int sk;
pr_info("Opening standalone socket (id 0x%x peer 0x%x)\n",
ui->ue.id, ui->ue.peer);
sk = socket(PF_UNIX, ui->ue.type, 0);
if (sk < 0) {
pr_perror("Can't make unix socket");
return -1;
}
if (restore_fown(sk, &ui->ue.fown))
return -1;
if (bind_unix_sk(sk, ui))
return -1;
if (ui->ue.state == TCP_LISTEN) {
pr_info("\tPutting 0x%x into listen state\n", ui->ue.id);
if (listen(sk, ui->ue.backlog) < 0) {
pr_perror("Can't make usk listen");
return -1;
}
} else if (ui->peer) {
pr_info("\tWill connect 0x%x to 0x%x later\n", ui->ue.id, ui->ue.peer);
if (schedule_conn_job(ui))
return -1;
}
return sk;
}
static int open_unix_sk(struct file_desc *d)
{
struct unix_sk_info *ui;
ui = container_of(d, struct unix_sk_info, d);
if (ui->flags & USK_PAIR_MASTER)
return open_unixsk_pair_master(ui);
else if (ui->flags & USK_PAIR_SLAVE)
return open_unixsk_pair_slave(ui);
else
return open_unixsk_standalone(ui);
}
static struct file_desc_ops unix_desc_ops = {
.open = open_unix_sk,
.want_transport = unixsk_should_open_transport,
};
int collect_unix_sockets(void)
{
int fd, ret;
pr_info("Reading unix sockets in\n");
fd = open_image_ro(CR_FD_UNIXSK);
if (fd < 0) {
if (errno == ENOENT)
return 0;
else
return -1;
}
while (1) {
struct unix_sk_info *ui;
ui = xmalloc(sizeof(*ui));
ret = -1;
if (ui == NULL)
break;
ret = read_img_eof(fd, &ui->ue);
if (ret <= 0) {
xfree(ui);
break;
}
if (ui->ue.namelen) {
ret = -1;
if (!ui->ue.namelen || ui->ue.namelen >= UNIX_PATH_MAX) {
pr_err("Bad unix name len %d\n", ui->ue.namelen);
break;
}
ui->name = xmalloc(ui->ue.namelen);
if (ui->name == NULL)
break;
ret = read_img_buf(fd, ui->name, ui->ue.namelen);
if (ret < 0)
break;
/*
* Make FS clean from sockets we're about to
* restore. See for how we bind them for details
*/
if (ui->name[0] != '\0' &&
!(ui->ue.uflags & USK_EXTERN))
unlink(ui->name);
} else
ui->name = NULL;
ui->peer = NULL;
ui->flags = 0;
pr_info(" `- Got %u peer %u\n", ui->ue.id, ui->ue.peer);
file_desc_add(&ui->d, FDINFO_UNIXSK, ui->ue.id,
&unix_desc_ops);
list_add_tail(&ui->list, &unix_sockets);
}
close(fd);
return read_sk_queues();
}
int resolve_unix_peers(void)
{
struct unix_sk_info *ui, *peer;
struct fdinfo_list_entry *fle, *fle_peer;
list_for_each_entry(ui, &unix_sockets, list) {
if (ui->peer)
continue;
if (!ui->ue.peer)
continue;
peer = find_unix_sk(ui->ue.peer);
/*
* Connect to external sockets requires
* special option to be passed.
*/
if (peer &&
(peer->ue.uflags & USK_EXTERN) &&
!(opts.ext_unix_sk))
peer = NULL;
if (!peer) {
pr_err("FATAL: Peer 0x%x unresolved for 0x%x\n",
ui->ue.peer, ui->ue.id);
return -1;
}
ui->peer = peer;
if (ui == peer)
/* socket connected to self %) */
continue;
if (peer->ue.peer != ui->ue.id)
continue;
/* socketpair or interconnected sockets */
peer->peer = ui;
/*
* Select who will restore the pair. Check is identical to
* the one in pipes.c and makes sure tasks wait for each other
* in pids sorting order (ascending).
*/
fle = file_master(&ui->d);
fle_peer = file_master(&peer->d);
if ((fle->pid < fle_peer->pid) ||
(fle->pid == fle_peer->pid &&
fle->fe.fd < fle_peer->fe.fd)) {
ui->flags |= USK_PAIR_MASTER;
peer->flags |= USK_PAIR_SLAVE;
} else {
peer->flags |= USK_PAIR_MASTER;
ui->flags |= USK_PAIR_SLAVE;
}
}
pr_info("Unix sockets:\n");
list_for_each_entry(ui, &unix_sockets, list) {
struct fdinfo_list_entry *fle;
pr_info("\t0x%x -> 0x%x (0x%x) flags 0x%x\n", ui->ue.id, ui->ue.peer,
ui->peer ? ui->peer->ue.id : 0, ui->flags);
list_for_each_entry(fle, &ui->d.fd_info_head, desc_list)
pr_info("\t\tfd %d in pid %d\n",
fle->fe.fd, fle->pid);
}
return 0;
}