This reverts commit 3abb6f5cd6a2d3056ed7ba372f8439ae4d66163d.
This reverts the revert as the tests are now fixed.
Signed-off-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
For python2/python3 compatibility install additional (python2-future)
and different (python2-ipaddress) packages during test.
Also switch Fedora tests to explicitly install versioned python packages
(python2-* instead of python-*).
Signed-off-by: Adrian Reber <areber@redhat.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
With userfaultfd we cannot reliably service process_vm_readv calls. The
maps007 test that uses these calls passed previously by sheer luck.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
lazy-pages is currently broken, so to avoid false positives in travis
because of that, temporarily disable lazy-pages testing
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
This test creates a pty pair, creates a test process and sets a slave
pty as control terminal for it.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Sometimes we see errors like this:
criu/cr-restore.gcda:Merge mismatch for function 106
It proabably means that this gcda file was corrupted. According to the
gcc man page, the -fprofile-update=atomic should fix this problem.
v2: this options appered in gcc7, so we need to install it.
Reported-by: Mr Travis CI
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
When we dump a veth device, the kernel reports where a peer device lives
and we use this information to restore this veth pair.
On restore we set a net ns id for a peer and it is created in the required
netns.
v2: add more comments
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
The lazy-thp may fail with older kernels if khugepaded will be fast enough
to merge pages in the partially populated areas.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
so that .gcda (coverage data) files are created with read-write
permissions for all, otherwise uns tests will not be able to
modify these files and code coverage data will not be collected
for them.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Running all the tests with --lazy-pages and --remote-lazy-pages takes too
long. Let's run only several representing tests for those cases.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
We found a good plugin for Jenkins to analize test results,
but it can handle only the junit format.
v2: work without the junit python module
v3: install junit-xml, because zdtm.py is executed
with the --report option from jenkins scripts.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Both test seem to reproduce issue #357 [1] too frequently which make it
really annoying. Temporarily remove them from lazy-pages passes until the
issue is fixed.
[1] https://github.com/xemul/criu/issues/357
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
* drop --keep-going etc from --lazy-pages pass
* add --remote-lazy-pages pass
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Most of zdtm test should pass with --lazy-pages with kernels newer than
4.11.
Some test excluded for older kernels surprisingly pass even now, mainly
becuase they do not actually stress userfaultfd, which will be fixed in the
upcoming commits :)
The cmdlinenv00 fails even with kernel 4.11 because of a race between uffd
and gup in the case external process reads /proc/<pid>/cmdline before
memory containing the command line is populated.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
The ppc64le docker image has broken /etc/apt/sources.list. A small fixup to
it allows running ppc64le tests.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
We only needed it for kernel 3.19. Apparently, Ubuntu 14.04.5 comes
with a kernel from 16.04 (i.e. 4.4), so we can disable this workaround!
Anyway, just in case, let's do it conditionally.
While at it, slightly improve the comment.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
asciidoc pulls in a lot of dependencies, most of those are not
needed as we just use it to convert txt to a man page. Adding
--no-install-recommended option to apt-get makes it skip those
additional dependencies. The only needed package is xmlto, so
let's add it explicitly.
This results is some 50 packages being skipped (mostly TeX/LaTeX and
some extra SGML tools), wow!
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
"make uninstall" is supposed to remove all the files that
"make install" (with the same arguments) have created.
This is a test to check that.
PS ideally, "make uninstall" should also remove any empty directories,
but let's not care about it for now.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
For now, it's done for local builds only (i.e. no per-arch Docker
builds yet). The reason is, it's easier to play with ccache when
the compiles are (relatively) fast.
Performance: there is 2x to 3x improvement in build speeds for
ideal cases (same code, hot cache), but the absolute savings
are negligible (example: 7 seconds instead of 23).
Note that ccache is not compatible with gcov, so we only enable it
for non-gcov build (which happens to be the one with clang).
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Not supported for a while.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Fixes the following error on travis-ci:
CC arch/x86/syscalls/syscall32.o
In file included from /usr/include/signal.h:28:0,
from /home/travis/build/0x7f454c46/criu/criu/arch/x86/include/asm/types.h:5,
from arch/x86/syscalls/syscall32.c:1:
/usr/include/features.h:374:25: fatal error: sys/cdefs.h: No such file or directory
# include <sys/cdefs.h>
^
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
They have to be the same on each iteration.
travis-ci: success for series starting with [01/21] build: install libnet-dev
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
It will be used to generate tcp packets for restoring half-closed sockets.
travis-ci: success for series starting with [01/21] build: install libnet-dev
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
travis-ci: success for tests: Add RPC testing to CI (rev2)
Acked-by: Andrey Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
With this patch, Travis will build/test CRIU using clang, for real.
I swear I fixed it before, but the fix was apparently lost.
travis-ci: success for series starting with [1/3] compel: mv noexecstack from CFLAGS to LDFLAGS
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
I don't know why they were disabled, but they work fine.
travis-ci: success for travis: execute cgroup tests
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Patches moving code around and changing packages list conflict
with each other all the time. Split these two :)
travis-ci: success for travis: Put package list in a variable
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Move GCOV to travis environment, so now we can change it easily
on a per-build basis.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
We are going to use this script for testing linux-next.
v2: remove bashism
travis-ci: success for scripts: allow to skip travis specific parts in travis-tests (rev2)
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Add a new option to zdtm.py to run "criu dedup" after "criu dump"
or "criu pre-dump".
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
Make sure travis/jenkins complain if someone sends a patch
that results in criu --help output violate standard terminal
width requirement.
Cc: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
We need to allow read/write access for these directories to execute
tests in user namespaces. zdtm.py does this too, but it is racy if
we run a few tests in parallel.
------------------------ grep Error ------------------------
(00.748406) 5: Error (criu/files-reg.c:1487): File zdtm/static has bad mode 040777 (expect 040775)
(00.752027) 1: Error (criu/cr-restore.c:1132): 5 exited, status=1
(00.790562) Error (criu/cr-restore.c:1135): 88 killed by signal 9: Killed
(00.790623) Error (criu/cr-restore.c:2019): Restoring FAILED.
------------------------ ERROR OVER ------------------------
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
We found that the 3.19 Ubuntu kernel has a bug and
the pagemap cache doesn't work properly on this kernel.
Unfortunately Travis-CI allows to create intancies only with this kernel,
so we need to add this workaround.
https://github.com/xemul/criu/issues/207
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
It is very hard to investigate travis fails, when something is segfaulted.
Let's add our own core file handler which will provide all required
information for us. Now test/abrt.sh shows a process tree,
process mappings, registers and backtraces.
v2: change a variable name
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Thanked-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
It works faster and checks that two criu processes can work concurrently.
Signed-off-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: Pavel Emelyanov <xemul@virtuozzo.com>
