Otherwise I get
| sockets.c: In function ‘dump_socket’:
| sockets.c:467: error: ‘st.st_ino’ may be used uninitialized in this function
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Since kernel commit 9c501935a3 the sys/socket.h
should be included prior the linux/netlink.h.
Make it so.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Since now we have local copies of a remove FDs we can dump socket queus without entering
a parasite code. This makes the code MUCH simpler.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
The statfs is not required, we now check for fd being a socket with S_IFSOCK.
The 2nd stat is just not needed, the caller provides stat info.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Now every inetsk fd dump results in a new entry in the fdinfo.img file. Sockets itself are
dumped into inetsk.img global image file. On restore the generic fdinfo redistribution algo
is used and inet sockets are opened only when required.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Each fdset item now has the callback which will show a contents of a magic-described
image file. Per-task and global show code is reworked to walk the respective fdsets
and calling ->show on each file.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
This fd is global, so make it such. It will stop being just a global
variable soon.
Plus, remove the pid arg from format.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Reuse the TCP socket restore, just add connect() and sanity checks
for protocol.
This is OK, since UDP connect doesn't go to network for connection
and (unlike unix sockets) doesn't require peer to be "online". It
just puts the peer's creds on socket and returns.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
These are required for inet sockets, but were not added since listen
sockets do not have them.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Showers should use pr_msg to avoid loglevel issues.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
The messages are filtered by their type
LOG_MSG - plain messages, they escape any (!) log level
filtration and go to stdout
LOG_ERROR - error messages
LOG_WARN - warning messages
LOG_INFO - informative messages
LOG_DEBUG - debug messages
By default the LOG_WARN log level is used, thus LOG_INFO
and LOG_DEBUG messages will not appear in output stream.
pr_panic helper was replaced with pr_err, pr_warning
shorthanded to pr_warn and old printk if rather pr_msg
now.
Because we share messages between "show" and "dump" actions,
before the "show" action proceed we need to tune up
log level and set it to LOG_INFO.
Also note that printing of VMA and siginfo now
became LOG_INFO messages, it was not that correct
to print them regardless the log level.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
This patch was designed to be generic and thus usable for all kinds of
sockets. Not sure, thah this goal has been reached, but at least I tried.
Key ideas:
1) sockets queue dump file have to be readed first and then packets entries
with offset for it's data in image will be collected in doubly linked list by
read_sockets_queue() function.
Note: list will contain sockets queues for all (!) the sockets of the task.
2) socket queue can be restored by restore_socket_queue(), which selects
packets from the list by passed id and use sendfile() top send them to the
passed socket. It also removes packet from the list and frees it.
Based on xemul@ patches.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
This patch was designed to be generic and thus usable for all kinds of
sockets. Not sure, thah this goal has been reached, but at least I tried.
Key ideas:
1) On-stack structure for collecting sockets queues and then passing them to
parasite code.
2) Singly linked list is used for collecting structures, representing sockets
of any kind (!) with queues.
Based on xemul@ patches.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
These are connected, but don't have names. Thus the connect
job fails on them. Use fake ones.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Unix diag and stat report dev_t-s in different formats. Cast one to
another when comparing in unix dumping.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
There's only one place with this, but the helper makes the code look
almost perfectly.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
This one reads a name from image, does preparations for bind and calls bind.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
They fully coincide now, just need to distinguish them by socket type.
Thus, add the type member on the unix_sk_listen and merge two hashes.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Structure used is the same, logic of connection is the same, and the
infrastructure is ready for this.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
The unix_dgram_peer coincides with the unix_conn_job.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
The unix_dgram_bound fully coincides with the unix_sk_listen.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
By the time we try to resolve datagram socket connection name the other
end may not yet be on the hash. Move the address resolution into the
conn job.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
The address length should be the real length, not the buffer size.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
sockets.c: In function ‘show_one_inet_img’:
sockets.c:151:2: error: format ‘%d’ expects argument of type ‘int’, but argument 9 has type ‘char *’ [-Werror=format]
sockets.c: In function ‘open_unix_sk_stream’:
sockets.c:925:10: error: unknown escape sequence: '\C' [-Werror]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
I've got it if -O2 compilation option used.
| cr-restore.c:1069:5: error: ‘ret’ may be used uninitialized in this function [-Werror=uninitialized]
| sockets.c:1145:7: error: ‘sk’ may be used uninitialized in this function [-Werror=uninitialized]
In first case 'ret' indeed might be uninitialized, and
in second case "goto err" was called too early. Fix them both.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
sockets.c: In function ‘try_dump_socket’:
sockets.c:366:3: error: format ‘%d’ expects type ‘int’, but argument 4 has type ‘__ino_t’
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
This is a standard convention to print error message (i.e. strerror(errno))
at the end of line, like this:
Cannot remove file: Permission denied
So pr_perror is fixed to follow this convention (using GNU extension
%m helps a lot here). Unfortunately, due to this we have to make
pr_perror() print a new line character, too, so we had to strip it
from the all pr_perror() invocations.
That (appending a newline) also makes pr_perror() a black sheep
in the herd of pr_* helpers, but what can we do? Worst case scenario
is an extra newline after an error message, not too harmful.
An alternative approach (stripping the newline from the passed format
string and re-adding it) was discussed thoroughly, and it was decided
that such a hack looks a bit too dirty.
Signed-off-by: Kir Kolyshkin <kir@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
It's done in two steps
- On checkpoint we find which icons are present
over all sockets and setup peer number to
appropriate listening socket
- On restore we collect listening sockets and once
we find in-flight connection we search for appropriate
listening socket name and use it to call connect() then
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
