This proc will be used for dumping zombies from pidns.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Here is a bit mess, because we used unsigned int instead of pid_t.
A negative value is used for uninitialized PID's variables.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
pstree_item contains virtual and real pid and we want to
get children by both of this pids.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
/proc/PID/maps can contains not up to date information about a stack vma.
A kernel marks a VMA as stack, if thread_struct->usersp is in it,
but usersp is updated, when a process calls a syscall.
This problem is occured, when we try to dump/restore a process in a loop.
When a restorer resumes a process, a restorer vma will be marked as stack.
A thread stack should not be marked as stack, because its vma is mapped
w/o MAP_GROWSDOWN.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
It looks better and the next patches adds more checks
before memory allocations.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
A task may be in another pidns and crtools should get a pid from this pidns.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
* Don't dumplicate array when sending to parasite
* Allocate necessary space in cr-dump for local fds/flags
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
These are used by single process, no need in keeping them in
such a strange way. Plus, turn this array into a hash table
for better search.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
If netns is dumped, crtools fails if it collects unsupported sockets.
If netns isn't dumped, crtools will fail only
if an unsupported socket should be dumped.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
It doesn't makemuch sense in pulling this further. The generic genid generation seems to
be enough for eny file type.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
All sockets should be collected in a target net name-space when the -n net
is specified.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
This patch introduces ThreadCoreEntry protobuf structure which is to carry
thread-specific arch-independent information.
Now put there the c/r futex robust lists.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Only the fact of the fd presence, its flags and fown and the sigmask.
The sigpending state is tightly coupled with the task's sigpending
state which is not yet supported.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
We'll need to check whether the socket is to be created in a net
namespace (since we can't detect this automatically yet). Thus the
namespaces flags are required there.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
If we dump tasks with mntns, we should look at pathes from point of a mntns root.
Now we support a situation when a root of an init task has the same root as the
mntns root, because we have not another way to get a root of mntns.
A path to an unix socket is copied, because the origin copy will be gone
out from the function, where it was created.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
This requires some exlanations
- Since we use protobuf data in restorer
code we need to carry a copy of appropriate
PB entities in resident memory. For this
sake task_restore_core_args and thread_restore_args
were significantly reworked. In short -- the caller
code fills PB structures into task arguments space.
v3:
- Combine everything arch related to thread_info field,
and make it optional
- Drop "version" field from message, we check version in
another specific message
- Don't forget to call core_entry__free_unpacked where needed
- We continue dumping FPU state, still it's not yet restored
v4:
- Don't carry task_core_entry and task_kobs_ids_entry for
threads, and yield error if present in image.
v5:
- Allocate core_entry depending on type of task being dumped
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
We haven't tested it for several monthes and there's no evidence
it is required at all. For dumping a single task -t option works
just fine.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Currently we store the images version in the core file. This is
bad, since core file describes a single process (or thread) and
says nothing about the images set as a whole (let alone the fact
that it's being parsed too late).
Thus introduce the inventory image file which describes the image
set the way we need (want). For now the only entry in it is the
images version. In the future it can be extended.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
v2:
- Use regular uint types in message proto
- Use PB engine for "show"
v3:
- drop usage of temp. variable in prepare_shmem_pid
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
We are ready to use FownEntry everywhere,
so drop fown_t type and clean up source code.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Because the MmEntry has a "repeated" field, we
copy aux vector explicitly and reserve space for
it in task args.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Same as with previous patch -- we have to pull image-independent entry out of the victim
task to be able to use protobuf library for encoding.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
A short story -- there were a long conversation on which format should
be used to keep checkpointed data on disk image. We ended up in using
Google's Protocol Buffers (see https://developers.google.com/protocol-buffers/
for detailed description). Thus image entries should be convered to PB.
This patch converts fdinfo_entry to PB "message fdinfo_entry".
Build note: one should have protobuf and protobuf-c installed to be able
to build crtools.
- http://code.google.com/p/protobuf/
- http://code.google.com/p/protobuf-c/
Inspired-by: Pavel Emelianov <xemul@parallels.com>
Inspired-by: Kinsbursky Stanislav <skinsbursky@openvz.org>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Checkpoint and restore of fifo is similar to
pipes c/r except the pipe end-points are named
file.
Because the fifo has a name we use regular files
facility for fifo path c/r.
Still there is a trick used to "open" fifo:
the opening procedure migh sleep if a fifo's peer
is not yet opened, so before doing a real open
we yield a fake open procedure (with O_RDWR flag)
which prevents us from sleeping even if peer
is not yet ready. Also we need writable fifo
end to restore data queued.
v2:
- add open/priv members to reg_file_info
- make open_fifo_fd to use open_fe_fd
- comment on pipe_id
- make sure the fifo data is not restored twice
v3:
- drop useless fixme comment and add sane one
v4:
- Use restore_data flag to escape data restore duplication
- Use S_ISREG for file contents copying
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Now crtools can restore sid in all cases.
A restore of pgid will be added soon and now it will fail on restore.
It's prevent testing of restoring SIDs.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
It's sign, that a parent has been changed sid after forking a child.
We should know a sid with which a process was born, because in a processes
chain, more then one process might change SID.
v2: fix names of variables
v3: prevent rewriting of born_sid
v4: Abort the restorer with error message if a born_sid can't be determing.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
to require dumping pid namespace. Dump and restore will be failed if
a tress doesn't contain a process init.
pid namespace will be created implicitly if a process init in the tree.
v2: fix comments from Pavel
v3: Restore of pidns should be approved by user
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Instead of spreading regular files handling code over
files.c and cr-dump.c move it to files-reg.c.
This allows to extend regular file handling code in
future without disturbing other source files and
make code logically coupled, where files.c is mostly
a place for general file handling code unrelated to
file type specifics.
While mostly it was code tossing there is some change
I have to notice -- the structure ghost_file was previously
declared in two paces cr-dump.c and files.c, in cr-dump.c
it was used for dumping while in files.c it was used
for restore. The structure had different members.
So to resolve this conflict the ghost_file structure
was renamed to ghost_file_dumpee.
Nothing else is changed.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
It's only required for making pipe_id, but making it is better to
be done in place and using the st_ino only.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Now pid is dumped from pid ns, it's gotted from parasite.
v2: fail if a zombie is in PIDNS
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
It uses pid for create image file and real_pid for dumping ns-s.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
because in collect_pstree we don't know pid-s of processes inside pidns
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
because a pid in a target pid ns is got from parasite.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
When we dump pid ns, dump_pstree is called after dump_tasks
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
If we try to dump a process from another pid ns,
we have not another way to get its pid.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Add struct pid and use it everywhere. This struct contains
two fields: pid and real_pid.
real_pid is a pid outside of the target pid namespace.
pid is in the target pid namespace
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
There is no need to make it xmalloc'ed, it's
global for all processes dumped.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Ad addition to commit 63000f5bb20e12ced2bc9662482775d163c97c5a,
this place was missed to fix.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
