Add support to set high and low thresholds for pools for
v4 and v6. A message will be emitted when the usage of
the pool first exceeds the high threshold. More messages
will be skipped until the usage has gone below the low
threshold and then back above the high threshold.
has elapsed (default 25%), the server will reuse the allocated lease
(provide a lease within the currently allocated lease-time) rather
than extend or renew the lease. This absolves the server of needing
to perform an fsync() operation on the lease database before reply,
which improves performance. [ISC-Bugs #22228]
Brian Masney and S.Kalyanasundraram and maintained for application to
the DHCP-4 sources by David Cantrell has been included. Please be
advised that these sources were contributed, and do not yet meet the
high standards we place on production sources we include by default.
As a result, the LDAP features are only included by using a compile-time
option which defaults off, and if you enable it you do so under your
own recognizance. We will be improving this software over time.
[ISC-Bugs #17741]
This feature is simply too experimental for right now, and causes
some problems to some failover installations. We will revisit this
in future releases. [ISC-Bugs #18832]
released in bursts after single fsync() events when the upper limit is
reached or if the receiving sockets go dry. The practical upshot is
that fsync-coupled server performance is now multiplicitively increased.
The default delayed ack limit is 28. Thanks entirely to a patch from
Christof Chen.
broke a lot of legacy site local configurations. The new code in place will
track site local space minimum option codes and logs a warning to encourage
updates and exploration of site local code migration problems. Option
codes less than 128 in site local spaces remain inaccessible.
[ISC-Bugs #17203]
- A possible relay agent option bug was repaired where random server
initialization state may have been used to signal the relay agent
information options sub-option code for the 'END' of the option space.
[ISC-Bugs #17203]
should send out option 81 (FQDN). Defaults to "on". If set to "off",
the FQDN option is not sent, even if the client requested it. This is
needed because some clients misbehave otherwise. [rt16624]
3.1.0a1's tables resulted in a reduction in default server memory use.
The new selected values provide more of a zero sum (increasing the size
of tables likely to be populated, decreasing the size of tables unlikely).
- Lease structures appear in three spearate hashes: by IP address, by UID,
and by hardware address. One type of table was used for all three, and
improvements to IP address hashing were applied to all three (so UID and
hardware addresses were treated like 4-byte integers). There are now two
types of tables, and the uid/hw hashes use functions more appropriate
to their needs.
- The max-lease-misbalance percentage no longer causes scheduled rebalance
runs to be skipped: it still governs the schedule, but every scheduled
run will attempt balance.
[ISC-Bugs #16396]
which causes the server to substantially reduce lease-times if there are
few (configured percentage) remaining leases. Thanks to a patch submitted
from Christof Chen. [ISC-Bugs #15409]
added. If this option is enabled, dhcpd will perform normal DHCID
conflict resolution (the default). If this option is disabled, it will
instead trust the assigned name implicitly (removing any other bindings
on that name). This option has not been made available in dhclient.
[ISC-Bugs #16165]
<draft-ietf-dhc-dhcp-dns-12.txt>.
common/options.c, common/tables.c, includes/dhcp.h:
Split the fqdn.name option into fqdn.hostname and fqdn.domainname.
includes/dhcpd.h, server/Makefile.dist, server/ddns.c, server/dhcp.c,
server/mdb.c, server/stables.c:
Added a new file (server/ddns.c) containing the DDNS updates code.
This file exports two functions: ddns_updates() and ddns_removals().
ddns_updates() is called when a lease is granted, and ddns_removals()
is called when the lease expires or is released.
server/dhcpd.c:
Remove the previous DDNS update code, and add default code for the
ddns-hostname, ddns-domainname, ddns-ttl, and ddns-rev-domainname
server options.
being correctly reference-counted.
- Make and use object-specific allocators.
- Add reference/dereference support to hash functions and to timeout
functions.
