mirror of
https://gitlab.isc.org/isc-projects/dhcp
synced 2025-08-27 20:38:10 +00:00
107 lines
3.3 KiB
Plaintext
107 lines
3.3 KiB
Plaintext
# Server configuration file example for DHCPv6
|
|
# From the file used for TAHI tests - addresses chosen
|
|
# to match TAHI rather than example block.
|
|
|
|
# IPv6 address valid lifetime
|
|
# (at the end the address is no longer usable by the client)
|
|
# (set to 30 days, the usual IPv6 default)
|
|
default-lease-time 2592000;
|
|
|
|
# IPv6 address preferred lifetime
|
|
# (at the end the address is deprecated, i.e., the client should use
|
|
# other addresses for new connections)
|
|
# (set to 7 days, the usual IPv6 default)
|
|
preferred-lifetime 604800;
|
|
|
|
# T1, the delay before Renew
|
|
# (default is 1/2 preferred lifetime)
|
|
# (set to 1 hour)
|
|
option dhcp-renewal-time 3600;
|
|
|
|
# T2, the delay before Rebind (if Renews failed)
|
|
# (default is 3/4 preferred lifetime)
|
|
# (set to 2 hours)
|
|
option dhcp-rebinding-time 7200;
|
|
|
|
# Enable RFC 5007 support (same than for DHCPv4)
|
|
allow leasequery;
|
|
|
|
# Global definitions for name server address(es) and domain search list
|
|
option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:3f3e;
|
|
option dhcp6.domain-search "test.example.com","example.com";
|
|
|
|
# Set preference to 255 (maximum) in order to avoid waiting for
|
|
# additional servers when there is only one
|
|
##option dhcp6.preference 255;
|
|
|
|
# Server side command to enable rapid-commit (2 packet exchange)
|
|
##option dhcp6.rapid-commit;
|
|
|
|
# The delay before information-request refresh
|
|
# (minimum is 10 minutes, maximum one day, default is to not refresh)
|
|
# (set to 6 hours)
|
|
option dhcp6.info-refresh-time 21600;
|
|
|
|
# The path of the lease file
|
|
dhcpv6-lease-file-name "/usr/local/var/db/dhcpd6.leases";
|
|
|
|
# Static definition (must be global)
|
|
host myclient {
|
|
# The entry is looked up by this
|
|
host-identifier option
|
|
dhcp6.client-id 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2;
|
|
|
|
# A fixed address
|
|
fixed-address6 3ffe:501:ffff:100::1234;
|
|
|
|
# A fixed prefix
|
|
fixed-prefix6 3ffe:501:ffff:101::/64;
|
|
|
|
# Override of the global definitions,
|
|
# works only when a resource (address or prefix) is assigned
|
|
option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:4f4e;
|
|
|
|
# For debug (to see when the entry statements are executed)
|
|
# (log "sol" when a matching Solicitation is received)
|
|
##if packet(0,1) = 1 { log(debug,"sol"); }
|
|
}
|
|
|
|
host otherclient {
|
|
# This host entry is hopefully matched if the client supplies a DUID-LL
|
|
# or DUID-LLT containing this MAC address.
|
|
hardware ethernet 01:00:80:a2:55:67;
|
|
|
|
fixed-address6 3ffe:501:ffff:100::4321;
|
|
}
|
|
|
|
# The subnet where the server is attached
|
|
# (i.e., the server has an address in this subnet)
|
|
subnet6 3ffe:501:ffff:100::/64 {
|
|
# Two addresses available to clients
|
|
# (the third client should get NoAddrsAvail)
|
|
range6 3ffe:501:ffff:100::10 3ffe:501:ffff:100::11;
|
|
|
|
# Use the whole /64 prefix for temporary addresses
|
|
# (i.e., direct application of RFC 4941)
|
|
range6 3ffe:501:ffff:100:: temporary;
|
|
|
|
# Some /64 prefixes available for Prefix Delegation (RFC 3633)
|
|
prefix6 3ffe:501:ffff:100:: 3ffe:501:ffff:111:: /64;
|
|
}
|
|
|
|
# A second subnet behind a relay agent
|
|
subnet6 3ffe:501:ffff:101::/64 {
|
|
range6 3ffe:501:ffff:101::10 3ffe:501:ffff:101::11;
|
|
|
|
# Override of the global definitions,
|
|
# works only when a resource (address or prefix) is assigned
|
|
option dhcp6.name-servers 3ffe:501:ffff:101:200:ff:fe00:3f3e;
|
|
|
|
}
|
|
|
|
# A third subnet behind a relay agent chain
|
|
subnet6 3ffe:501:ffff:102::/64 {
|
|
range6 3ffe:501:ffff:102::10 3ffe:501:ffff:102::11;
|
|
}
|
|
|