Merge branch 'jreed-docs'

doc/guide/bind10-guide.xml

@@ -1199,10 +1199,9 @@ TODO
     <title>Incoming Zone Transfers</title>
 
     <para>
-      The <command>b10-xfrin</command> process is started by
+      Incoming zones are transferred using the <command>b10-xfrin</command>
-      <command>bind10</command>.
+      process which is started by <command>bind10</command>.
-      It can be manually triggered to request an AXFR zone
+      When received, the zone is stored in the BIND 10
-      transfer. When received, it is stored in the BIND 10
       data store, and its records can be served by
       <command>b10-auth</command>.
       In combination with <command>b10-zonemgr</command> (for
@@ -1213,8 +1212,22 @@ TODO
     <note><simpara>
      The current development release of BIND 10 only supports
      AXFR. (IXFR is not supported.) 
+
+<!-- TODO: sqlite3 data source only? -->
+
     </simpara></note>
 
+<!-- TODO:
+
+how to tell bind10 you are a secondary?
+
+when will it first attempt to check for new zone? (using REFRESH?)
+what if zonemgr is not running?
+
+what if a NOTIFY is sent?
+
+-->
+
     <para>
        To manually trigger a zone transfer to retrieve a remote zone,
        you may use the <command>bindctl</command> utility.
@@ -1223,6 +1236,9 @@ TODO
        <screen>&gt; <userinput>Xfrin retransfer zone_name="<option>foo.example.org</option>" master=<option>192.0.2.99</option></userinput></screen>
     </para>
 
+<!-- TODO: can that retransfer be used to identify a new zone? -->
+<!-- TODO: what if doesn't exist at that master IP? -->
+
   </chapter>
 
   <chapter id="xfrout">
@@ -1329,28 +1345,34 @@ what is XfroutClient xfr_client??
 
 <!-- TODO: later the above will have some defaults -->
 
-    <para>
+    <section>
-      To enable forwarding, the upstream address and port must be
+      <title>Forwarding</title>
-      configured to forward queries to, such as:
 
-      <screen>
+      <para>
+
+        To enable forwarding, the upstream address and port must be
+        configured to forward queries to, such as:
+
+        <screen>
 &gt; <userinput>config set Resolver/forward_addresses [{ "address": "<replaceable>192.168.1.1</replaceable>", "port": 53 }]</userinput>
 &gt; <userinput>config commit</userinput>
 </screen>
 
-      (Replace <replaceable>192.168.1.1</replaceable> to point to your
+        (Replace <replaceable>192.168.1.1</replaceable> to point to your
-      full resolver.)
+        full resolver.)
-    </para>
+      </para>
 
-    <para>
+      <para>
-      Normal iterative name service can be re-enabled by clearing the
+        Normal iterative name service can be re-enabled by clearing the
-      forwarding address(es); for example:
+        forwarding address(es); for example:
 
-      <screen>
+        <screen>
 &gt; <userinput>config set Resolver/forward_addresses []</userinput>
 &gt; <userinput>config commit</userinput>
 </screen>
-    </para>
+      </para>
+
+    </section>
 
 <!-- TODO: later try this
 

src/bin/bind10/bind10.xml

@@ -144,6 +144,9 @@ The default is the basename of ARG 0.
     </variablelist>
   </refsect1>
 
+<!--
+TODO: configuration section
+-->
 <!--
   <refsect1>
     <title>FILES</title>

src/bin/bindctl/bindctl.1

@@ -22,7 +22,7 @@
 bindctl \- control and configure BIND 10
 .SH "SYNOPSIS"
 .HP \w'\fBbindctl\fR\ 'u
-\fBbindctl\fR [\fB\-a\ \fR\fB\fIaddress\fR\fR] [\fB\-h\fR] [\fB\-c\ \fR\fB\fIfile\fR\fR] [\fB\-p\ \fR\fB\fInumber\fR\fR] [\fB\-\-address\ \fR\fB\fIaddress\fR\fR] [\fB\-\-help\fR] [\fB\-\-certificate\-chain\ \fR\fB\fIfile\fR\fR] [\fB\-\-port\ \fR\fB\fInumber\fR\fR] [\fB\-\-version\fR]
+\fBbindctl\fR [\fB\-a\ \fR\fB\fIaddress\fR\fR] [\fB\-h\fR] [\fB\-c\ \fR\fB\fIfile\fR\fR] [\fB\-p\ \fR\fB\fInumber\fR\fR] [\fB\-\-address\ \fR\fB\fIaddress\fR\fR] [\fB\-\-help\fR] [\fB\-\-certificate\-chain\ \fR\fB\fIfile\fR\fR] [\fB\-\-csv\-file\-dir\fR\fB\fIfile\fR\fR] [\fB\-\-port\ \fR\fB\fInumber\fR\fR] [\fB\-\-version\fR]
 .SH "DESCRIPTION"
 .PP
 The
@@ -52,6 +52,11 @@ daemon\&. The default is 127\&.0\&.0\&.1\&.
 The PEM formatted server certificate validation chain file\&.
 .RE
 .PP
+\fB\-\-csv\-file\-dir\fR\fIfile\fR
+.RS 4
+The directory name in which the user/password CSV file is stored (see AUTHENTICATION)\&. By default this option doesn\'t have any value, in which case the "\&.bind10" directory under the user\'s home directory will be used\&.
+.RE
+.PP
 \fB\-h\fR, \fB\-\-help\fR
 .RS 4
 Display command usage\&.
@@ -85,10 +90,10 @@ Display the version number and exit\&.
 .RE
 .SH "AUTHENTICATION"
 .PP
-The tool will authenticate using a username and password\&. On the first successful login, it will save the details to
+The tool will authenticate using a username and password\&. On the first successful login, it will save the details to a comma\-separated\-value (CSV) file which will be used for later uses of
-~/\&.bind10/default_user\&.csv
+\fBbindctl\fR\&. The file name is
-which will be used for later uses of
+default_user\&.csv
-\fBbindctl\fR\&.
+located under the directory specified by the \-\-csv\-file\-dir option\&.
 .SH "USAGE"
 .PP
 The