2000-10-24 10:56:40 +00:00
/*************************************************************************
*
* $ RCSfile : moduleoptions . cxx , v $
*
2000-11-16 07:55:22 +00:00
* $ Revision : 1.5 $
2000-10-24 10:56:40 +00:00
*
2000-11-16 07:55:22 +00:00
* last change : $ Author : as $ $ Date : 2000 - 11 - 16 08 : 55 : 22 $
2000-10-24 10:56:40 +00:00
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc . , October , 2000
*
* GNU Lesser General Public License Version 2.1
* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
* Copyright 2000 by Sun Microsystems , Inc .
* 901 San Antonio Road , Palo Alto , CA 94303 , USA
*
* This library is free software ; you can redistribute it and / or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1 , as published by the Free Software Foundation .
*
* This library is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the GNU
* Lesser General Public License for more details .
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library ; if not , write to the Free Software
* Foundation , Inc . , 59 Temple Place , Suite 330 , Boston ,
* MA 02111 - 1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 ( the " License " ) ; You may not use this file
* except in compliance with the License . You may obtain a copy of the
* License at http : //www.openoffice.org/license.html.
*
* Software provided under this License is provided on an " AS IS " basis ,
* WITHOUT WARRANTY OF ANY KIND , EITHER EXPRESSED OR IMPLIED , INCLUDING ,
* WITHOUT LIMITATION , WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS ,
* MERCHANTABLE , FIT FOR A PARTICULAR PURPOSE , OR NON - INFRINGING .
* See the License for the specific provisions governing your rights and
* obligations concerning the Software .
*
* The Initial Developer of the Original Code is : Sun Microsystems , Inc .
*
* Copyright : 2000 by Sun Microsystems , Inc .
*
* All Rights Reserved .
*
* Contributor ( s ) : _______________________________________
*
*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# pragma hdrstop
//_________________________________________________________________________________________________________________
// includes
//_________________________________________________________________________________________________________________
# include "moduleoptions.hxx"
# ifndef _UTL_CONFIGMGR_HXX_
# include <unotools/configmgr.hxx>
# endif
# ifndef _UTL_CONFIGITEM_HXX_
# include <unotools/configitem.hxx>
# endif
# ifndef _TOOLS_DEBUG_HXX
# include <tools/debug.hxx>
# endif
# ifndef _COM_SUN_STAR_UNO_ANY_HXX_
# include <com/sun/star/uno/Any.hxx>
# endif
# ifndef _COM_SUN_STAR_UNO_SEQUENCE_HXX_
# include <com/sun/star/uno/Sequence.hxx>
# endif
# ifndef _OSL_MUTEX_HXX_
# include <osl/mutex.hxx>
# endif
# ifndef _RTL_USTRING_
# include <rtl/ustring>
# endif
2000-11-01 11:01:31 +00:00
# ifndef _VOS_PROFILE_HXX_
# include <vos/profile.hxx>
# endif
2000-10-24 10:56:40 +00:00
//_________________________________________________________________________________________________________________
// namespaces
//_________________________________________________________________________________________________________________
using namespace : : utl ;
using namespace : : rtl ;
using namespace : : osl ;
2000-11-01 11:01:31 +00:00
using namespace : : vos ;
2000-10-24 10:56:40 +00:00
using namespace : : com : : sun : : star : : uno ;
//_________________________________________________________________________________________________________________
// const
//_________________________________________________________________________________________________________________
2000-11-01 11:01:31 +00:00
/*-************************************************************************************************************/ /**
@ descr These values are used to define needed keys from ouer configuration management to support
all neccessary functionality of these implementation .
It ' s a fast way to make changes if some keys change his name or location !
Follow property handle are neccessary to specify right position in return list of configuration
for asked values . We ask it with a list of properties to get his values . The returned list
has the same order like ouer given name list !
NAMELIST [ PROPERTYHANDLE_xxx ] has value VALUELIST [ PROPERTYHANDLE_xxx ] !
See impl_GetPropertyNames ( ) and his using for furter informations !
*/ /*-*************************************************************************************************************/
# define ROOTNODE_MODULES OUString(RTL_CONSTASCII_USTRINGPARAM("Setup / Office / Modules" ))
# define PROPERTYNAME_PORTALMATH OUString(RTL_CONSTASCII_USTRINGPARAM("Math / Install" ))
# define PROPERTYNAME_PORTALCHART OUString(RTL_CONSTASCII_USTRINGPARAM("Chart / Install" ))
# define PROPERTYNAME_PORTALCALC OUString(RTL_CONSTASCII_USTRINGPARAM("Calc / Install" ))
# define PROPERTYNAME_PORTALDRAW OUString(RTL_CONSTASCII_USTRINGPARAM("Draw / Install" ))
# define PROPERTYNAME_PORTALWRITER OUString(RTL_CONSTASCII_USTRINGPARAM("Writer / Install" ))
# define PROPERTYNAME_PORTALIMPRESS OUString(RTL_CONSTASCII_USTRINGPARAM("Impress / Install" ))
2000-11-03 08:45:51 +00:00
# define PROPERTYNAME_PORTALBASICIDE OUString(RTL_CONSTASCII_USTRINGPARAM("BasicIDE / Install" ))
2000-11-01 11:01:31 +00:00
/*TODO:
Enable it if new configuration keys exist !
in the moment use HACK with sversion . ini !
# define PROPERTYNAME_PORTALMATH OUString(RTL_CONSTASCII_USTRINGPARAM("Math / PortalInstalled" ))
# define PROPERTYNAME_PORTALCHART OUString(RTL_CONSTASCII_USTRINGPARAM("Chart / PortalInstalled" ))
# define PROPERTYNAME_PORTALCALC OUString(RTL_CONSTASCII_USTRINGPARAM("Calc / PortalInstalled" ))
# define PROPERTYNAME_PORTALDRAW OUString(RTL_CONSTASCII_USTRINGPARAM("Draw / PortalInstalled" ))
# define PROPERTYNAME_PORTALWRITER OUString(RTL_CONSTASCII_USTRINGPARAM("Writer / PortalInstalled" ))
# define PROPERTYNAME_PORTALIMPRESS OUString(RTL_CONSTASCII_USTRINGPARAM("Impress / PortalInstalled" ))
# define PROPERTYNAME_CLIENTMATH OUString(RTL_CONSTASCII_USTRINGPARAM("Math / ClientInstalled" ))
# define PROPERTYNAME_CLIENTCHART OUString(RTL_CONSTASCII_USTRINGPARAM("Chart / ClientInstalled" ))
# define PROPERTYNAME_CLIENTCALC OUString(RTL_CONSTASCII_USTRINGPARAM("Calc / ClientInstalled" ))
# define PROPERTYNAME_CLIENTDRAW OUString(RTL_CONSTASCII_USTRINGPARAM("Draw / ClientInstalled" ))
# define PROPERTYNAME_CLIENTWRITER OUString(RTL_CONSTASCII_USTRINGPARAM("Writer / ClientInstalled" ))
# define PROPERTYNAME_CLIENTIMPRESS OUString(RTL_CONSTASCII_USTRINGPARAM("Impress / ClientInstalled" ))
*/
# define PROPERTYHANDLE_PORTALMATH 0
# define PROPERTYHANDLE_PORTALCHART 1
# define PROPERTYHANDLE_PORTALCALC 2
# define PROPERTYHANDLE_PORTALDRAW 3
# define PROPERTYHANDLE_PORTALWRITER 4
# define PROPERTYHANDLE_PORTALIMPRESS 5
2000-11-03 08:45:51 +00:00
# define PROPERTYHANDLE_PORTALBASICIDE 6
2000-11-01 11:01:31 +00:00
/*TODO:
Enable it if new configuration keys exist !
in the moment use HACK with sversion . ini !
# define PROPERTYHANDLE_CLIENTMATH 6
# define PROPERTYHANDLE_CLIENTCHART 7
# define PROPERTYHANDLE_CLIENTCALC 8
# define PROPERTYHANDLE_CLIENTDRAW 9
# define PROPERTYHANDLE_CLIENTWRITER 10
# define PROPERTYHANDLE_CLIENTIMPRESS 11
*/
//#define PROPERTYCOUNT 12
2000-11-03 08:45:51 +00:00
# define PROPERTYCOUNT 7
2000-11-01 11:01:31 +00:00
/*-************************************************************************************************************/ /**
@ descr The return value of GetFeature ( ) is a combination of different bit - flags . Follow const definitions
can be used to seperate all included informations from these return value !
These values can be used to enable / disable a module flag on a returned integer too .
To enable a module information we use ENABLEFEATURE_xxx defines . . . to disable it the DISABLEFEATURE_xxx !
*/ /*-*************************************************************************************************************/
2000-11-03 08:45:51 +00:00
# define ENABLEFEATURE_BASICIDE FEATUREFLAG_BASICIDE // ----------1-----
2000-11-01 11:01:31 +00:00
# define ENABLEFEATURE_MATH FEATUREFLAG_MATH // -------1--------
# define ENABLEFEATURE_CHART FEATUREFLAG_CHART // ------1---------
# define ENABLEFEATURE_CALC FEATUREFLAG_CALC // ----1-----------
# define ENABLEFEATURE_DRAW FEATUREFLAG_DRAW // ---1------------
# define ENABLEFEATURE_WRITER FEATUREFLAG_WRITER // --1-------------
# define ENABLEFEATURE_IMPRESS FEATUREFLAG_IMPRESS // 1---------------
2000-11-03 08:45:51 +00:00
# define DISABLEFEATURE_BASICIDE 0xFFFFFFDF // 1111111111-11111
2000-11-01 11:01:31 +00:00
# define DISABLEFEATURE_MATH 0xFFFFFEFF // 1111111-11111111
# define DISABLEFEATURE_CHART 0xFFFFFDFF // 111111-111111111
# define DISABLEFEATURE_CALC 0xFFFFF7FF // 1111-11111111111
# define DISABLEFEATURE_DRAW 0xFFFFEFFF // 111-111111111111
# define DISABLEFEATURE_WRITER 0xFFFFDFFF // 11-1111111111111
# define DISABLEFEATURE_IMPRESS 0xFFFF7FFF // -111111111111111
/*-************************************************************************************************************/ /**
@ descr These defines are used for better code reading !
They represent the only possible states of module installation .
*/ /*-*************************************************************************************************************/
# define INSTALLED sal_True
# define NOT_INSTALLED sal_False
/*-************************************************************************************************************/ /**
@ descr These defines are used as default values for m_nClient / PortalModules !
So you can change the initialization state in an easy manner .
*/ /*-*************************************************************************************************************/
# define DEFAULT_CLIENTMODULES 0
# define DEFAULT_PORTALMODULES 0
2000-10-24 10:56:40 +00:00
//_________________________________________________________________________________________________________________
// private declarations!
//_________________________________________________________________________________________________________________
class SvtModuleOptions_Impl : public ConfigItem
{
//-------------------------------------------------------------------------------------------------------------
// public methods
//-------------------------------------------------------------------------------------------------------------
public :
//---------------------------------------------------------------------------------------------------------
// constructor / destructor
//---------------------------------------------------------------------------------------------------------
SvtModuleOptions_Impl ( ) ;
~ SvtModuleOptions_Impl ( ) ;
//---------------------------------------------------------------------------------------------------------
// overloaded methods of baseclass
//---------------------------------------------------------------------------------------------------------
/*-****************************************************************************************************/ /**
@ short called for notify of configmanager
@ descr These method is called from the ConfigManager before application ends or from the
PropertyChangeListener if the sub tree broadcasts changes . You must update your
internal values .
@ ATTENTION These method is ' nt implemented yet - because we support readonly values only . . .
There is no reason to change ouer values at runtime !
@ seealso baseclass ConfigItem
@ param " seqPropertyNames " is the list of properties which should be updated .
@ return -
@ onerror -
*/ /*-*****************************************************************************************************/
virtual void Notify ( const Sequence < OUString > & seqPropertyNames )
{
DBG_ERRORFILE ( " SvtModuleOptions_Impl::Notify() \n Not implemented yet! I think we don't need it for readonly values! ... \n " ) ;
}
/*-****************************************************************************************************/ /**
@ short write changes to configuration
@ descr These method writes the changed values into the sub tree
and should always called in our destructor to guarantee consistency of config data .
@ ATTENTION These method is ' nt implemented yet - because we support readonly values only . . .
There is no reason to change ouer values at runtime !
@ seealso baseclass ConfigItem
@ param -
@ return -
@ onerror -
*/ /*-*****************************************************************************************************/
virtual void Commit ( )
{
DBG_ERRORFILE ( " SvtModuleOptions_Impl::Commit() \n Not implemented yet! I think we don't need it for readonly values! ... \n " ) ;
}
//---------------------------------------------------------------------------------------------------------
// public interface
//---------------------------------------------------------------------------------------------------------
/*-****************************************************************************************************/ /**
@ short access method to get internal values
@ descr These methods regulate a readonly access to ouer internal variables !
@ seealso -
@ param -
@ return sal_True if module is installed or sal_Fals if not .
@ onerror -
*/ /*-*****************************************************************************************************/
2000-11-01 11:01:31 +00:00
sal_Bool IsMath ( sal_Bool bClient = sal_False ) const ;
sal_Bool IsChart ( sal_Bool bClient = sal_False ) const ;
sal_Bool IsCalc ( sal_Bool bClient = sal_False ) const ;
sal_Bool IsDraw ( sal_Bool bClient = sal_False ) const ;
sal_Bool IsWriter ( sal_Bool bClient = sal_False ) const ;
sal_Bool IsImpress ( sal_Bool bClient = sal_False ) const ;
2000-11-03 08:45:51 +00:00
sal_Bool IsBasicIDE ( sal_Bool bClient = sal_False ) const ;
2000-11-01 11:01:31 +00:00
sal_uInt32 GetFeatures ( sal_Bool bClient = sal_False ) const ;
2000-10-24 10:56:40 +00:00
//-------------------------------------------------------------------------------------------------------------
// private methods
//-------------------------------------------------------------------------------------------------------------
private :
/*-****************************************************************************************************/ /**
@ short return list of key names of ouer configuration management which represent oue module tree
@ descr These methods return a static const list of key names . We need it to get needed values from our
configuration management .
@ seealso -
@ param -
@ return A list of needed configuration keys is returned .
@ onerror -
*/ /*-*****************************************************************************************************/
2000-11-01 11:01:31 +00:00
static Sequence < OUString > impl_GetPropertyNames ( ) ;
2000-10-24 10:56:40 +00:00
//-------------------------------------------------------------------------------------------------------------
// private member
//-------------------------------------------------------------------------------------------------------------
private :
2000-11-01 11:01:31 +00:00
sal_uInt32 m_nClientModules ; // cache states of localy cached components as flag field
sal_uInt32 m_nPortalModules ; // cache states of portal installed components as flag field
2000-10-24 10:56:40 +00:00
} ;
//_________________________________________________________________________________________________________________
// definitions
//_________________________________________________________________________________________________________________
//*****************************************************************************************************************
// constructor
//*****************************************************************************************************************
SvtModuleOptions_Impl : : SvtModuleOptions_Impl ( )
// Init baseclasses first
: ConfigItem ( ROOTNODE_MODULES )
// Init member then.
2000-11-01 11:01:31 +00:00
, m_nClientModules ( DEFAULT_CLIENTMODULES )
, m_nPortalModules ( DEFAULT_PORTALMODULES )
2000-10-24 10:56:40 +00:00
{
// Use our static list of configuration keys to get his values.
2000-11-01 11:01:31 +00:00
const Sequence < OUString > seqNames = impl_GetPropertyNames ( ) ;
const Sequence < Any > seqValues = GetProperties ( seqNames ) ;
2000-10-24 10:56:40 +00:00
// Safe impossible cases.
// We need values from ALL configuration keys.
// Follow assignment use order of values in relation to our list of key names!
DBG_ASSERT ( ! ( seqNames . getLength ( ) ! = seqValues . getLength ( ) ) , " SvtModuleOptions_Impl::SvtModuleOptions_Impl() \n I miss some values of configuration keys! \n " ) ;
// Copy values from list in right order to ouer internal member.
sal_Int32 nPropertyCount = seqValues . getLength ( ) ;
for ( sal_Int32 nProperty = 0 ; nProperty < nPropertyCount ; + + nProperty )
{
// Safe impossible cases.
// Check any for valid value.
DBG_ASSERT ( ! ( seqValues [ nProperty ] . hasValue ( ) = = sal_False | | seqValues [ nProperty ] . getValueTypeClass ( ) ! = TypeClass_BOOLEAN ) , " SvtModuleOptions_Impl::SvtModuleOptions_Impl() \n Invalid property value detected! \n " ) ;
2000-11-01 11:01:31 +00:00
sal_Bool bState ;
seqValues [ nProperty ] > > = bState ;
2000-10-24 10:56:40 +00:00
switch ( nProperty )
{
2000-11-01 11:01:31 +00:00
/*TODO: Hack with sversion.ini
case PROPERTYHANDLE_CLIENTMATH : {
if ( bState = = INSTALLED )
{
m_nClientModules | = ENABLEFEATURE_MATH ;
}
else
{
m_nClientModules & = DISABLEFEATURE_MATH ;
}
}
break ;
case PROPERTYHANDLE_CLIENTCHART : {
if ( bState = = INSTALLED )
{
m_nClientModules | = ENABLEFEATURE_CHART ;
}
else
{
m_nClientModules & = DISABLEFEATURE_CHART ;
}
}
break ;
case PROPERTYHANDLE_CLIENTCALC : {
if ( bState = = INSTALLED )
{
m_nClientModules | = ENABLEFEATURE_CALC ;
}
else
{
m_nClientModules & = DISABLEFEATURE_CALC ;
}
}
break ;
case PROPERTYHANDLE_CLIENTDRAW : {
if ( bState = = INSTALLED )
{
m_nClientModules | = ENABLEFEATURE_DRAW ;
}
else
{
m_nClientModules & = DISABLEFEATURE_DRAW ;
}
}
break ;
case PROPERTYHANDLE_CLIENTWRITER : {
if ( bState = = INSTALLED )
{
m_nClientModules | = ENABLEFEATURE_WRITER ;
}
else
{
m_nClientModules & = DISABLEFEATURE_WRITER ;
}
}
break ;
case PROPERTYHANDLE_CLIENTIMPRESS : {
if ( bState = = INSTALLED )
{
m_nClientModules | = ENABLEFEATURE_IMPRESS ;
}
else
{
m_nClientModules & = DISABLEFEATURE_IMPRESS ;
}
}
break ;
*/
case PROPERTYHANDLE_PORTALMATH : {
if ( bState = = INSTALLED )
{
m_nPortalModules | = ENABLEFEATURE_MATH ;
}
else
{
m_nPortalModules & = DISABLEFEATURE_MATH ;
}
}
break ;
case PROPERTYHANDLE_PORTALCHART : {
if ( bState = = INSTALLED )
{
m_nPortalModules | = ENABLEFEATURE_CHART ;
}
else
{
m_nPortalModules & = DISABLEFEATURE_CHART ;
}
}
break ;
case PROPERTYHANDLE_PORTALCALC : {
if ( bState = = INSTALLED )
{
m_nPortalModules | = ENABLEFEATURE_CALC ;
}
else
{
m_nPortalModules & = DISABLEFEATURE_CALC ;
}
}
break ;
case PROPERTYHANDLE_PORTALDRAW : {
if ( bState = = INSTALLED )
{
m_nPortalModules | = ENABLEFEATURE_DRAW ;
}
else
{
m_nPortalModules & = DISABLEFEATURE_DRAW ;
}
}
break ;
case PROPERTYHANDLE_PORTALWRITER : {
if ( bState = = INSTALLED )
{
m_nPortalModules | = ENABLEFEATURE_WRITER ;
}
else
{
m_nPortalModules & = DISABLEFEATURE_WRITER ;
}
}
break ;
case PROPERTYHANDLE_PORTALIMPRESS : {
if ( bState = = INSTALLED )
{
m_nPortalModules | = ENABLEFEATURE_IMPRESS ;
}
else
{
m_nPortalModules & = DISABLEFEATURE_IMPRESS ;
}
}
break ;
2000-11-03 08:45:51 +00:00
case PROPERTYHANDLE_PORTALBASICIDE : {
if ( bState = = INSTALLED )
{
m_nPortalModules | = ENABLEFEATURE_BASICIDE ;
}
else
{
m_nPortalModules & = DISABLEFEATURE_BASICIDE ;
}
}
break ;
2000-11-01 11:01:31 +00:00
default : DBG_ERRORFILE ( " SvtModuleOptions_Impl::SvtModuleOptions_Impl() \n Who has changed my property order mechanism? \n " ) ;
2000-10-24 10:56:40 +00:00
}
}
2000-11-01 11:01:31 +00:00
/* Hack! -------------------------------------------------------------------------------------
Read values for localy cached components from sversion . ini !
*/
OUString sSVersionINI ;
OProfile : : getProfileName ( sSVersionINI , OUString : : createFromAscii ( " sversion " ) , OUString : : createFromAscii ( " ?^ " ) ) ;
OProfile aSVersion ;
aSVersion . open ( sSVersionINI ) ;
if ( aSVersion . readBool ( " StarWebTop 6.0 Plugin Priority " , " application/vnd.stardivision.math " , sal_False ) = = sal_True )
{
m_nClientModules | = ENABLEFEATURE_MATH ;
}
else
{
m_nClientModules & = DISABLEFEATURE_MATH ;
}
if ( aSVersion . readBool ( " StarWebTop 6.0 Plugin Priority " , " application/vnd.stardivision.chart " , sal_False ) = = sal_True )
{
m_nClientModules | = ENABLEFEATURE_CHART ;
}
else
{
m_nClientModules & = DISABLEFEATURE_CHART ;
}
if ( aSVersion . readBool ( " StarWebTop 6.0 Plugin Priority " , " application/vnd.stardivision.calc " , sal_False ) = = sal_True )
{
m_nClientModules | = ENABLEFEATURE_CALC ;
}
else
{
m_nClientModules & = DISABLEFEATURE_CALC ;
}
if ( aSVersion . readBool ( " StarWebTop 6.0 Plugin Priority " , " application/vnd.stardivision.draw " , sal_False ) = = sal_True )
{
m_nClientModules | = ENABLEFEATURE_DRAW ;
}
else
{
m_nClientModules & = DISABLEFEATURE_DRAW ;
}
if ( aSVersion . readBool ( " StarWebTop 6.0 Plugin Priority " , " application/vnd.stardivision.writer " , sal_False ) = = sal_True )
{
m_nClientModules | = ENABLEFEATURE_WRITER ;
}
else
{
m_nClientModules & = DISABLEFEATURE_WRITER ;
}
if ( aSVersion . readBool ( " StarWebTop 6.0 Plugin Priority " , " application/vnd.stardivision.impress " , sal_False ) = = sal_True )
{
m_nClientModules | = ENABLEFEATURE_IMPRESS ;
}
else
{
m_nClientModules & = DISABLEFEATURE_IMPRESS ;
}
2000-11-03 08:45:51 +00:00
// To read the sversion.ini is a hack ... and these new key isn't supported by a sversion entry!
// Enable basic ide by default!!!
m_nClientModules | = ENABLEFEATURE_BASICIDE ;
2000-11-01 11:01:31 +00:00
aSVersion . close ( ) ;
/* Hack! -------------------------------------------------------------------------------------*/
2000-10-24 10:56:40 +00:00
// I think we don't need any notifications ...
// because we support readonly variables yet in the moment!
// EnableNotification( seqNames );
}
//*****************************************************************************************************************
// destructor
//*****************************************************************************************************************
SvtModuleOptions_Impl : : ~ SvtModuleOptions_Impl ( )
{
2000-11-01 11:01:31 +00:00
// We support readonly variables in the moment only.
// There is no reason to commit ouer data set ...
/*
if ( IsModified ( ) = = sal_True )
{
Commit ( ) ;
}
*/
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtModuleOptions_Impl : : IsMath ( sal_Bool bClient ) const
{
// Set default return state to "non installed".
sal_Bool bState = sal_False ;
// Try to specify right install state for given search parameter!
if ( bClient = = sal_True )
{
2000-11-16 07:55:22 +00:00
if ( ( m_nClientModules & FEATUREFLAG_MATH ) = = FEATUREFLAG_MATH )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
else
{
2000-11-16 07:55:22 +00:00
if ( ( m_nPortalModules & FEATUREFLAG_MATH ) = = FEATUREFLAG_MATH )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
// Return install state.
return bState ;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtModuleOptions_Impl : : IsChart ( sal_Bool bClient ) const
{
// Set default return state to "non installed".
sal_Bool bState = sal_False ;
// Try to specify right install state for given search parameter!
if ( bClient = = sal_True )
{
2000-11-16 07:55:22 +00:00
if ( ( m_nClientModules & FEATUREFLAG_CHART ) = = FEATUREFLAG_CHART )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
else
{
2000-11-16 07:55:22 +00:00
if ( ( m_nPortalModules & FEATUREFLAG_CHART ) = = FEATUREFLAG_CHART )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
// Return install state.
return bState ;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtModuleOptions_Impl : : IsCalc ( sal_Bool bClient ) const
{
// Set default return state to "non installed".
sal_Bool bState = sal_False ;
// Try to specify right install state for given search parameter!
if ( bClient = = sal_True )
{
2000-11-16 07:55:22 +00:00
if ( ( m_nClientModules & FEATUREFLAG_CALC ) = = FEATUREFLAG_CALC )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
else
{
2000-11-16 07:55:22 +00:00
if ( ( m_nPortalModules & FEATUREFLAG_CALC ) = = FEATUREFLAG_CALC )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
// Return install state.
return bState ;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtModuleOptions_Impl : : IsDraw ( sal_Bool bClient ) const
{
// Set default return state to "non installed".
sal_Bool bState = sal_False ;
// Try to specify right install state for given search parameter!
if ( bClient = = sal_True )
{
2000-11-16 07:55:22 +00:00
if ( ( m_nClientModules & FEATUREFLAG_DRAW ) = = FEATUREFLAG_DRAW )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
else
{
2000-11-16 07:55:22 +00:00
if ( ( m_nPortalModules & FEATUREFLAG_DRAW ) = = FEATUREFLAG_DRAW )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
// Return install state.
return bState ;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtModuleOptions_Impl : : IsWriter ( sal_Bool bClient ) const
{
// Set default return state to "non installed".
sal_Bool bState = sal_False ;
// Try to specify right install state for given search parameter!
if ( bClient = = sal_True )
{
2000-11-16 07:55:22 +00:00
if ( ( m_nClientModules & FEATUREFLAG_WRITER ) = = FEATUREFLAG_WRITER )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
else
{
2000-11-16 07:55:22 +00:00
if ( ( m_nPortalModules & FEATUREFLAG_WRITER ) = = FEATUREFLAG_WRITER )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
// Return install state.
return bState ;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtModuleOptions_Impl : : IsImpress ( sal_Bool bClient ) const
{
// Set default return state to "non installed".
sal_Bool bState = sal_False ;
// Try to specify right install state for given search parameter!
if ( bClient = = sal_True )
{
2000-11-16 07:55:22 +00:00
if ( ( m_nClientModules & FEATUREFLAG_IMPRESS ) = = FEATUREFLAG_IMPRESS )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
else
{
2000-11-16 07:55:22 +00:00
if ( ( m_nPortalModules & FEATUREFLAG_IMPRESS ) = = FEATUREFLAG_IMPRESS )
{
bState = sal_True ;
}
2000-11-01 11:01:31 +00:00
}
// Return install state.
return bState ;
}
2000-11-03 08:45:51 +00:00
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtModuleOptions_Impl : : IsBasicIDE ( sal_Bool bClient ) const
{
// Set default return state to "non installed".
sal_Bool bState = sal_False ;
// Try to specify right install state for given search parameter!
if ( bClient = = sal_True )
{
2000-11-16 07:55:22 +00:00
if ( ( m_nClientModules & FEATUREFLAG_BASICIDE ) = = FEATUREFLAG_BASICIDE )
{
bState = sal_True ;
}
2000-11-03 08:45:51 +00:00
}
else
{
2000-11-16 07:55:22 +00:00
if ( ( m_nPortalModules & FEATUREFLAG_BASICIDE ) = = FEATUREFLAG_BASICIDE )
{
bState = sal_True ;
}
2000-11-03 08:45:51 +00:00
}
// Return install state.
return bState ;
}
2000-11-01 11:01:31 +00:00
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_uInt32 SvtModuleOptions_Impl : : GetFeatures ( sal_Bool bClient ) const
{
// Set default return state to "non installed".
sal_uInt32 nFeatures = 0 ;
// Try to specify right install state for given search parameter!
if ( bClient = = sal_True )
{
nFeatures = m_nClientModules ;
}
else
{
nFeatures = m_nPortalModules ;
}
// Return install state.
return nFeatures ;
2000-10-24 10:56:40 +00:00
}
//*****************************************************************************************************************
// private method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
Sequence < OUString > SvtModuleOptions_Impl : : impl_GetPropertyNames ( )
2000-10-24 10:56:40 +00:00
{
// Build static list of configuration key names.
static const OUString pProperties [ ] =
{
2000-11-01 11:01:31 +00:00
/*TODO: Hack width sversion.ini
PROPERTYNAME_CLIENTMATH ,
PROPERTYNAME_CLIENTCHART ,
PROPERTYNAME_CLIENTCALC ,
PROPERTYNAME_CLIENTDRAW ,
PROPERTYNAME_CLIENTWRITER ,
PROPERTYNAME_CLIENTIMPRESS , */
PROPERTYNAME_PORTALMATH ,
PROPERTYNAME_PORTALCHART ,
PROPERTYNAME_PORTALCALC ,
PROPERTYNAME_PORTALDRAW ,
PROPERTYNAME_PORTALWRITER ,
PROPERTYNAME_PORTALIMPRESS ,
2000-11-03 08:45:51 +00:00
PROPERTYNAME_PORTALBASICIDE ,
2000-10-24 10:56:40 +00:00
} ;
// Initialize return sequence with these list ...
static const Sequence < OUString > seqPropertyNames ( pProperties , PROPERTYCOUNT ) ;
// ... and return it.
return seqPropertyNames ;
}
//*****************************************************************************************************************
// initialize static member
// DON'T DO IT IN YOUR HEADER!
// see definition for further informations
//*****************************************************************************************************************
SvtModuleOptions_Impl * SvtModuleOptions : : m_pDataContainer = NULL ;
sal_Int32 SvtModuleOptions : : m_nRefCount = 0 ;
//*****************************************************************************************************************
// constructor
//*****************************************************************************************************************
SvtModuleOptions : : SvtModuleOptions ( )
{
// Global access, must be guarded (multithreading!).
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
2000-10-24 10:56:40 +00:00
// Increase ouer refcount ...
+ + m_nRefCount ;
// ... and initialize ouer data container only if it not already exist!
if ( m_pDataContainer = = NULL )
{
m_pDataContainer = new SvtModuleOptions_Impl ;
}
}
//*****************************************************************************************************************
// destructor
//*****************************************************************************************************************
SvtModuleOptions : : ~ SvtModuleOptions ( )
{
// Global access, must be guarded (multithreading!)
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
2000-10-24 10:56:40 +00:00
// Decrease ouer refcount.
- - m_nRefCount ;
// If last instance was deleted ...
// we must destroy ouer static data container!
if ( m_nRefCount < = 0 )
{
delete m_pDataContainer ;
m_pDataContainer = NULL ;
}
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
sal_Bool SvtModuleOptions : : IsMath ( sal_Bool bClient ) const
2000-10-24 10:56:40 +00:00
{
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
return m_pDataContainer - > IsMath ( bClient ) ;
2000-10-24 10:56:40 +00:00
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
sal_Bool SvtModuleOptions : : IsChart ( sal_Bool bClient ) const
2000-10-24 10:56:40 +00:00
{
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
return m_pDataContainer - > IsChart ( bClient ) ;
2000-10-24 10:56:40 +00:00
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
sal_Bool SvtModuleOptions : : IsCalc ( sal_Bool bClient ) const
2000-10-24 10:56:40 +00:00
{
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
return m_pDataContainer - > IsCalc ( bClient ) ;
2000-10-24 10:56:40 +00:00
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
sal_Bool SvtModuleOptions : : IsDraw ( sal_Bool bClient ) const
2000-10-24 10:56:40 +00:00
{
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
return m_pDataContainer - > IsDraw ( bClient ) ;
2000-10-24 10:56:40 +00:00
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
sal_Bool SvtModuleOptions : : IsWriter ( sal_Bool bClient ) const
2000-10-24 10:56:40 +00:00
{
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
return m_pDataContainer - > IsWriter ( bClient ) ;
2000-10-24 10:56:40 +00:00
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
sal_Bool SvtModuleOptions : : IsImpress ( sal_Bool bClient ) const
2000-10-24 10:56:40 +00:00
{
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
return m_pDataContainer - > IsImpress ( bClient ) ;
2000-10-24 10:56:40 +00:00
}
2000-11-03 08:45:51 +00:00
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtModuleOptions : : IsBasicIDE ( sal_Bool bClient ) const
{
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
return m_pDataContainer - > IsBasicIDE ( bClient ) ;
}
2000-10-24 10:56:40 +00:00
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
sal_uInt32 SvtModuleOptions : : GetFeatures ( sal_Bool bClient ) const
2000-10-24 10:56:40 +00:00
{
2000-11-01 11:01:31 +00:00
MutexGuard aGuard ( GetOwnStaticMutex ( ) ) ;
return m_pDataContainer - > GetFeatures ( bClient ) ;
2000-10-24 10:56:40 +00:00
}
//*****************************************************************************************************************
// private method
//*****************************************************************************************************************
2000-11-01 11:01:31 +00:00
Mutex & SvtModuleOptions : : GetOwnStaticMutex ( )
2000-10-24 10:56:40 +00:00
{
// Initialize static mutex only for one time!
static Mutex * pMutex = NULL ;
// If these method first called (Mutex not already exist!) ...
if ( pMutex = = NULL )
{
// ... we must create a new one. Protect follow code with the global mutex -
// It must be - we create a static variable!
MutexGuard aGuard ( Mutex : : getGlobalMutex ( ) ) ;
// We must check our pointer again - because it can be that another instance of ouer class will be fastr then these!
if ( pMutex = = NULL )
{
// Create the new mutex and set it for return on static variable.
static Mutex aMutex ;
pMutex = & aMutex ;
}
}
// Return new created or already existing mutex object.
return * pMutex ;
}
