Files
libreoffice/sc/source/ui/docshell/docsh.cxx

2253 lines
79 KiB
C++
Raw Normal View History

2000-09-18 16:07:07 +00:00
/*************************************************************************
*
* $RCSfile: docsh.cxx,v $
*
* $Revision: 1.6 $
2000-09-18 16:07:07 +00:00
*
* last change: $Author: nn $ $Date: 2000-10-27 19:00:10 $
2000-09-18 16:07:07 +00:00
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
// System - Includes -----------------------------------------------------
#ifdef PCH
#include "ui_pch.hxx"
#endif
2000-10-20 08:14:03 +00:00
#pragma hdrstop
2000-09-18 16:07:07 +00:00
#include "scitems.hxx"
#include <tools/fsys.hxx>
2000-09-18 16:07:07 +00:00
#include <tools/stream.hxx>
#include <tools/string.hxx>
2000-10-05 16:13:03 +00:00
#include <tools/urlobj.hxx>
#include <vcl/msgbox.hxx>
2000-09-18 16:07:07 +00:00
#include <vcl/virdev.hxx>
#include <vcl/waitobj.hxx>
#include <svtools/ctrltool.hxx>
#include <svtools/sfxecode.hxx>
#include <svtools/zforlist.hxx>
#include <sfx2/app.hxx>
2000-09-18 16:07:07 +00:00
#include <sfx2/bindings.hxx>
#include <sfx2/dinfdlg.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/docfilt.hxx>
#include <sfx2/evntconf.hxx>
#include <sfx2/sfx.hrc>
#include <sfx2/topfrm.hxx>
#include <svx/srchitem.hxx>
2000-09-18 16:07:07 +00:00
#include <svx/svxmsbas.hxx>
#include <offmgr/app.hxx>
#include <offmgr/fltrcfg.hxx>
#include <so3/clsids.hxx>
2000-09-18 16:07:07 +00:00
#include <unotools/charclass.hxx>
#include <sot/formats.hxx>
#define SOT_FORMATSTR_ID_STARCALC_30 SOT_FORMATSTR_ID_STARCALC
#ifndef SO2_DECL_SVSTORAGESTREAM_DEFINED
#define SO2_DECL_SVSTORAGESTREAM_DEFINED
SO2_DECL_REF(SvStorageStream)
#endif
// INCLUDE ---------------------------------------------------------------
#include "cell.hxx"
2000-09-18 16:07:07 +00:00
#include "global.hxx"
#include "filter.hxx"
#include "scmod.hxx"
#include "tabvwsh.hxx"
#include "docfunc.hxx"
#include "imoptdlg.hxx"
#include "impex.hxx"
#include "scresid.hxx"
#include "sc.hrc"
#include "globstr.hrc"
#include "tpstat.hxx"
#include "scerrors.hxx"
#include "brdcst.hxx"
#include "stlpool.hxx"
#include "autostyl.hxx"
#include "attrib.hxx"
#include "asciiopt.hxx"
#include "waitoff.hxx"
#include "docpool.hxx" // LoadCompleted
#include "progress.hxx"
#include "pntlock.hxx"
#include "collect.hxx"
#include "docuno.hxx"
#include "appoptio.hxx"
#include "detdata.hxx"
#include "printfun.hxx"
2000-09-18 16:07:07 +00:00
#include "dociter.hxx"
#include "cellform.hxx"
#include "chartlis.hxx"
#include "hints.hxx"
#include "xmlwrap.hxx"
#include "docsh.hxx"
// STATIC DATA -----------------------------------------------------------
// Stream-Namen im Storage
const sal_Char __FAR_DATA ScDocShell::pStarCalcDoc[] = STRING_SCSTREAM; // "StarCalcDocument"
const sal_Char __FAR_DATA ScDocShell::pStyleName[] = "SfxStyleSheets";
// Filter-Namen (wie in sclib.cxx)
static const sal_Char __FAR_DATA pFilterSc50[] = "StarCalc 5.0";
//static const sal_Char __FAR_DATA pFilterSc50Temp[] = "StarCalc 5.0 Vorlage/Template";
static const sal_Char __FAR_DATA pFilterSc40[] = "StarCalc 4.0";
//static const sal_Char __FAR_DATA pFilterSc40Temp[] = "StarCalc 4.0 Vorlage/Template";
static const sal_Char __FAR_DATA pFilterSc30[] = "StarCalc 3.0";
//static const sal_Char __FAR_DATA pFilterSc30Temp[] = "StarCalc 3.0 Vorlage/Template";
static const sal_Char __FAR_DATA pFilterSc10[] = "StarCalc 1.0";
static const sal_Char __FAR_DATA pFilterXML[] = "StarOffice XML (Calc)";
static const sal_Char __FAR_DATA pFilterAscii[] = "Text - txt - csv (StarCalc)";
static const sal_Char __FAR_DATA pFilterLotus[] = "Lotus";
static const sal_Char __FAR_DATA pFilterExcel4[] = "MS Excel 4.0";
static const sal_Char __FAR_DATA pFilterEx4Temp[] = "MS Excel 4.0 Vorlage/Template";
static const sal_Char __FAR_DATA pFilterExcel5[] = "MS Excel 5.0/95";
static const sal_Char __FAR_DATA pFilterEx5Temp[] = "MS Excel 5.0/95 Vorlage/Template";
static const sal_Char __FAR_DATA pFilterExcel95[] = "MS Excel 95";
static const sal_Char __FAR_DATA pFilterEx95Temp[] = "MS Excel 95 Vorlage/Template";
static const sal_Char __FAR_DATA pFilterExcel97[] = "MS Excel 97";
static const sal_Char __FAR_DATA pFilterEx97Temp[] = "MS Excel 97 Vorlage/Template";
static const sal_Char __FAR_DATA pFilterDBase[] = "dBase";
static const sal_Char __FAR_DATA pFilterDif[] = "DIF";
static const sal_Char __FAR_DATA pFilterSylk[] = "SYLK";
static const sal_Char __FAR_DATA pFilterHtml[] = "HTML (StarCalc)";
static const sal_Char __FAR_DATA pFilterRtf[] = "Rich Text Format (StarCalc)";
//----------------------------------------------------------------------
#define ScDocShell
#include "scslots.hxx"
SFX_IMPL_INTERFACE(ScDocShell,SfxObjectShell, ScResId(SCSTR_DOCSHELL))
{}
// GlobalName der aktuellen Version:
SFX_IMPL_OBJECTFACTORY_DLL(ScDocShell, SFXOBJECTSHELL_STD_NORMAL,
SvGlobalName(SO3_SC_CLASSID), Sc)
TYPEINIT1( ScDocShell, SfxObjectShell ); // SfxInPlaceObject: kein Type-Info ?
//------------------------------------------------------------------
void __EXPORT ScDocShell::FillClass( SvGlobalName* pClassName,
ULONG* pFormat,
String* pAppName,
String* pFullTypeName,
String* pShortTypeName,
long nFileFormat ) const
{
SfxInPlaceObject::FillClass( pClassName, pFormat, pAppName,
pFullTypeName, pShortTypeName, nFileFormat );
if ( nFileFormat == SOFFICE_FILEFORMAT_31 )
{
*pClassName = SvGlobalName( SO3_SC_CLASSID_30 );
*pFormat = SOT_FORMATSTR_ID_STARCALC_30;
*pAppName = String( ScResId( SCSTR_30_APPLICATION ) );
*pFullTypeName = String( ScResId( SCSTR_30_LONG_DOCNAME ) );
*pShortTypeName = String( ScResId( SCSTR_SHORT_SCDOC_NAME ) );
}
else if ( nFileFormat == SOFFICE_FILEFORMAT_40 )
{
*pClassName = SvGlobalName( SO3_SC_CLASSID_40 );
*pFormat = SOT_FORMATSTR_ID_STARCALC_40;
*pAppName = String( ScResId( SCSTR_40_APPLICATION ) );
*pFullTypeName = String( ScResId( SCSTR_40_LONG_DOCNAME ) );
*pShortTypeName = String( ScResId( SCSTR_SHORT_SCDOC_NAME ) );
}
else if ( nFileFormat == SOFFICE_FILEFORMAT_NOW )
{
*pFullTypeName = String( ScResId( SCSTR_LONG_SCDOC_NAME ) );
*pShortTypeName = String( ScResId( SCSTR_SHORT_SCDOC_NAME ) );
}
else
DBG_ERROR("wat fuer ne Version?");
}
//------------------------------------------------------------------
void __EXPORT ScDocShell::FillRegInfo( SvEmbeddedRegistryInfo* pInfo )
{
SfxInPlaceObject::FillRegInfo( pInfo );
pInfo->aObjName = String::CreateFromAscii(pStarCalcDoc);
pInfo->nMajorVers = 5;
pInfo->nMinorVers = 0;
pInfo->aHumanShortTypeName = String( ScResId( SCSTR_HUMAN_SCDOC_NAME ) );
//! nIconResId nur, wenn Desktop?
pInfo->nIconResId = REG_ICON_RESID_CALC;
// nShell und aExt sind schon gefuellt
}
//------------------------------------------------------------------
void ScDocShell::DoEnterHandler()
{
ScTabViewShell* pViewSh = ScTabViewShell::GetActiveViewShell();
if (pViewSh)
if (pViewSh->GetViewData()->GetDocShell() == this)
SC_MOD()->InputEnterHandler();
}
//------------------------------------------------------------------
USHORT ScDocShell::GetSaveTab()
{
USHORT nTab = 0;
ScTabViewShell* pSh = GetBestViewShell();
if (pSh)
{
const ScMarkData& rMark = pSh->GetViewData()->GetMarkData();
for ( nTab = 0; nTab <= MAXTAB; nTab++ ) // erste markierte Tabelle
if ( rMark.GetTableSelect( nTab ) )
break;
}
return nTab;
}
//------------------------------------------------------------------
BOOL ScDocShell::LoadCalc( SvStorage* pStor ) // StarCalc 3 oder 4 Datei
{
SfxEventConfiguration* pConf = SFX_APP()->GetEventConfig();
BOOL bWarningEnabled = pConf && pConf->IsWarningForced();
if (bWarningEnabled)
aDocument.SetMacroCallMode(SC_MACROCALL_ASK); // ask before executing
BOOL bRet = TRUE;
SvStorageStreamRef aPoolStm = pStor->OpenStream( String::CreateFromAscii(pStyleName), STREAM_STD_READ );
SvStorageStreamRef aDocStm = pStor->OpenStream( String::CreateFromAscii(pStarCalcDoc), STREAM_STD_READ );
ULONG nPoolErr = aPoolStm->GetError();
ULONG nDocErr = aDocStm->GetError();
ScProgress* pProgress = NULL;
if ( eShellMode == SFX_CREATE_MODE_STANDARD && !nDocErr )
{
ULONG nCurPos = aDocStm->Tell();
ULONG nEndPos = aDocStm->Seek( STREAM_SEEK_TO_END );
aDocStm->Seek( nCurPos );
ULONG nRange = nEndPos - nCurPos;
pProgress = new ScProgress( this, ScGlobal::GetRscString(STR_LOAD_DOC), nRange );
}
if ( nPoolErr == ERRCODE_IO_NOTEXISTS && nDocErr == ERRCODE_IO_NOTEXISTS )
{
// leerer Storage = leeres Dokument -> wie InitNew
aDocument.MakeTable(0);
Size aSize( (long) ( STD_COL_WIDTH * HMM_PER_TWIPS * OLE_STD_CELLS_X ),
(long) ( ScGlobal::nStdRowHeight * HMM_PER_TWIPS * OLE_STD_CELLS_Y ) );
// hier muss auch der Start angepasst werden
SetVisAreaOrSize( Rectangle( Point(), aSize ), TRUE );
aDocument.GetStyleSheetPool()->CreateStandardStyles();
aDocument.UpdStlShtPtrsFrmNms();
}
else if ( !nPoolErr && !nDocErr )
{
aPoolStm->SetVersion(pStor->GetVersion());
aDocStm->SetVersion(pStor->GetVersion());
aDocument.Clear(); // keine Referenzen auf Pool behalten!
RemoveItem( SID_ATTR_CHAR_FONTLIST );
RemoveItem( ITEMID_COLOR_TABLE );
RemoveItem( ITEMID_GRADIENT_LIST );
RemoveItem( ITEMID_HATCH_LIST );
RemoveItem( ITEMID_BITMAP_LIST );
RemoveItem( ITEMID_DASH_LIST );
RemoveItem( ITEMID_LINEEND_LIST );
aDocument.LoadPool( *aPoolStm, FALSE ); // FALSE: RefCounts nicht laden
bRet = (aPoolStm->GetError() == 0);
if ( !bRet )
{
pStor->SetError( aPoolStm->GetError() );
DBG_ERROR( "Fehler im Pool-Stream" );
}
else if (eShellMode != SFX_CREATE_MODE_ORGANIZER)
{
// ViewOptions are not completely stored (to avoid warnings),
// so must be initialized from global settings.
//! This can be removed if a new file format loads all ViewOptions !!!
aDocument.SetViewOptions( SC_MOD()->GetViewOptions() );
ULONG nErrCode = aPoolStm->GetErrorCode();
const ByteString aStrKey = pStor->GetKey();
const BOOL bKeySet = (aStrKey.Len() > 0);
if ( bKeySet )
aDocStm->SetKey( aStrKey ); // Passwort setzen
bRet = aDocument.Load( *aDocStm, pProgress );
if ( !bRet && bKeySet ) // Passwort falsch
{
SetError( ERRCODE_SFX_WRONGPASSWORD );
pStor->SetError( ERRCODE_SFX_WRONGPASSWORD );
}
if ( aDocStm->GetError() )
{
// Zeile-8192-Meldung braucht nur zu kommen, wenn die Zeilen
// beschraenkt sind, sonst ist "falsches Format" besser
#ifdef SC_LIMIT_ROWS
if ( aDocument.HasLostData() ) // zuviele Zeilen?
pStor->SetError( SCERR_IMPORT_8K_LIMIT );
else
#endif
pStor->SetError( aDocStm->GetError() );
bRet = FALSE;
DBG_ERROR( "Fehler im Document-Stream" );
}
else
{
if ( !(nErrCode & ERRCODE_WARNING_MASK) )
nErrCode = aDocStm->GetErrorCode();
if ( nErrCode & ERRCODE_WARNING_MASK )
SetError( nErrCode );
}
if (bRet)
{
aDocument.UpdateFontCharSet();
UpdateLinks(); // verknuepfte Tabellen in Link-Manager
RemoveUnknownObjects(); // unbekannte Ole-Objekte loeschen
}
}
else // SFX_CREATE_MODE_ORGANIZER
{
// UpdateStdNames is called from ScDocument::Load, but is also needed
// if only the styles are loaded!
ScStyleSheetPool* pStylePool = aDocument.GetStyleSheetPool();
if (pStylePool)
pStylePool->UpdateStdNames(); // correct style names for different languages
}
if (bRet)
aDocument.GetPool()->MyLoadCompleted();
}
else
{
DBG_ERROR( "Stream-Fehler");
bRet = FALSE;
}
if (!aDocument.HasTable(0))
aDocument.MakeTable(0);
if (eShellMode == SFX_CREATE_MODE_EMBEDDED)
{
USHORT nVisTab = aDocument.GetVisibleTab();
BOOL bHasVis = aDocument.HasTable(nVisTab);
if ( SfxInPlaceObject::GetVisArea().IsEmpty() || !bHasVis )
{
if (!bHasVis)
{
nVisTab = 0;
aDocument.SetVisibleTab(nVisTab);
}
USHORT nStartCol,nStartRow;
aDocument.GetDataStart( nVisTab, nStartCol, nStartRow );
USHORT nEndCol,nEndRow;
aDocument.GetPrintArea( nVisTab, nEndCol, nEndRow );
if (nStartCol>nEndCol)
nStartCol = nEndCol;
if (nStartRow>nEndRow)
nStartRow = nEndRow;
// hier muss auch der Start angepasst werden
SetVisAreaOrSize( aDocument.GetMMRect( nStartCol,nStartRow, nEndCol,nEndRow, nVisTab ),
TRUE );
}
}
delete pProgress;
if ( eShellMode == SFX_CREATE_MODE_STANDARD && bRet )
{
if ( bWarningEnabled )
{
// If the document contains macro calls, ask now
// otherwise set to ALLOWED (for entering new formulas).
// (If document is loaded invisibly, ASK state is kept)
if ( aDocument.HasMacroCallsAfterLoad() )
aDocument.CheckMacroWarn();
else
aDocument.SetMacroCallMode(SC_MACROCALL_ALLOWED);
}
}
return bRet;
}
BOOL ScDocShell::SaveCalc( SvStorage* pStor ) // Calc 3 oder 4 Datei
{
BOOL bRet = TRUE;
ScProgress* pProgress = NULL;
if ( eShellMode == SFX_CREATE_MODE_STANDARD )
{
ULONG nRange = aDocument.GetWeightedCount() + 1;
pProgress = new ScProgress( this, ScGlobal::GetRscString(STR_SAVE_DOC), nRange );
}
SvStorageStreamRef aPoolStm = pStor->OpenStream( String::CreateFromAscii(pStyleName) );
if( !aPoolStm->GetError() )
{
aPoolStm->SetVersion(pStor->GetVersion());
aPoolStm->SetSize(0);
bRet = aDocument.SavePool( *aPoolStm );
}
else
{
DBG_ERROR( "Stream Error" );
bRet = FALSE;
}
if ( bRet && eShellMode != SFX_CREATE_MODE_ORGANIZER )
{
SvStorageStreamRef aDocStm = pStor->OpenStream( String::CreateFromAscii(pStarCalcDoc) );
if( !aDocStm->GetError() )
{
aDocStm->SetVersion(pStor->GetVersion());
aDocStm->SetKey(pStor->GetKey()); // Passwort setzen
aDocStm->SetSize(0);
bRet = aDocument.Save( *aDocStm, pProgress );
2000-10-05 16:13:03 +00:00
DBG_ASSERT( bRet, "Error while saving" );
2000-09-18 16:07:07 +00:00
if ( aDocument.HasLostData() )
{
// Warnung, dass nicht alles gespeichert wurde
if (!pStor->GetError())
pStor->SetError(SCWARN_EXPORT_MAXROW);
}
else if ( aDocStm->GetErrorCode() && !pStor->GetErrorCode() )
pStor->SetError(aDocStm->GetErrorCode());
else if ( OFF_APP()->GetFilterOptions()->IsLoadExcelBasicStorage() )
{
// #75497# warning if MS VBA macros are lost
// GetSaveWarningOfMSVBAStorage checks if sub-storage with VBA macros is present
// (only possible when editing Excel documents -- storage is not copied to
// StarCalc files)
ULONG nVBAWarn = SvxImportMSVBasic::GetSaveWarningOfMSVBAStorage( *this );
if ( nVBAWarn && !pStor->GetErrorCode() )
pStor->SetError( nVBAWarn );
}
}
else
{
DBG_ERROR( "Stream Error" );
bRet = FALSE;
}
}
delete pProgress;
return bRet;
}
BOOL __EXPORT ScDocShell::Load( SvStorage* pStor )
{
DBG_ASSERT( pStor, "Nanu... Load ohne Storage?" );
// wait cursor is handled with progress bar
GetUndoManager()->Clear();
BOOL bRet = SfxInPlaceObject::Load( pStor );
if( bRet )
bRet = LoadCalc( pStor );
if (!bRet && !pStor->GetError())
pStor->SetError( SVSTREAM_FILEFORMAT_ERROR );
InitItems();
CalcOutputFactor();
// #73762# invalidate eventually temporary table areas
if ( bRet )
aDocument.InvalidateTableArea();
bIsEmpty = FALSE;
FinishedLoading( SFX_LOADED_MAINDOCUMENT | SFX_LOADED_IMAGES );
return bRet;
}
void __EXPORT ScDocShell::SFX_NOTIFY( SfxBroadcaster& rBC, const TypeId& rBCType,
const SfxHint& rHint, const TypeId& rHintType )
{
if (rHint.ISA(SfxSimpleHint)) // ohne Parameter
{
ULONG nSlot = ((const SfxSimpleHint&)rHint).GetId();
switch ( nSlot )
{
case SFX_HINT_TITLECHANGED:
aDocument.SetName( SfxShell::GetName() );
// RegisterNewTargetNames gibts nicht mehr
SFX_APP()->Broadcast(SfxSimpleHint( SC_HINT_DOCNAME_CHANGED )); // Navigator
break;
}
}
else if (rHint.ISA(SfxStyleSheetHint)) // Vorlagen geaendert
NotifyStyle((const SfxStyleSheetHint&) rHint);
else if (rHint.ISA(ScAutoStyleHint))
{
//! direct call for AutoStyles
// this is called synchronously from ScInterpreter::ScStyle,
// modifying the document must be asynchronous
// (handled by AddInitial)
ScAutoStyleHint& rStlHint = (ScAutoStyleHint&)rHint;
ScRange aRange = rStlHint.GetRange();
String aName1 = rStlHint.GetStyle1();
String aName2 = rStlHint.GetStyle2();
UINT32 nTimeout = rStlHint.GetTimeout();
if (!pAutoStyleList)
pAutoStyleList = new ScAutoStyleList(this);
pAutoStyleList->AddInitial( aRange, aName1, nTimeout, aName2 );
}
}
// Inhalte fuer Organizer laden
BOOL __EXPORT ScDocShell::LoadFrom( SvStorage* pStor )
{
DBG_ASSERT( pStor, "Nanu... LoadFrom ohne Storage?" );
WaitObject aWait( GetDialogParent() );
BOOL bRet = FALSE;
SvStorageStreamRef aPoolStm = pStor->OpenStream( String::CreateFromAscii(pStyleName), STREAM_STD_READ );
if ( !aPoolStm->GetError() )
{
aPoolStm->SetVersion(pStor->GetVersion());
aDocument.Clear(); // keine Referenzen auf Pool behalten!
RemoveItem( SID_ATTR_CHAR_FONTLIST );
RemoveItem( ITEMID_COLOR_TABLE );
RemoveItem( ITEMID_GRADIENT_LIST );
RemoveItem( ITEMID_HATCH_LIST );
RemoveItem( ITEMID_BITMAP_LIST );
RemoveItem( ITEMID_DASH_LIST );
RemoveItem( ITEMID_LINEEND_LIST );
aDocument.LoadPool( *aPoolStm, TRUE ); // TRUE: RefCounts aus Datei laden
bRet = (aPoolStm->GetError() == 0);
2000-10-05 16:13:03 +00:00
DBG_ASSERT( bRet, "Error in pool stream" );
2000-09-18 16:07:07 +00:00
// UpdateStdNames is called from ScDocument::Load, but is also needed
// if only the styles are loaded!
ScStyleSheetPool* pStylePool = aDocument.GetStyleSheetPool();
if (pStylePool)
pStylePool->UpdateStdNames(); // correct style names for different languages
// Hier auf keinen Fall LoadCompleted, weil ohne Laden der Tabellen die RefCounts
// nicht hochgezaehlt wurden.
// Die Items wuerden dann geloescht, und beim Speichern wuerde Muell herauskommen.
// Darum die Ref-Counts aus der Datei laden (TRUE bei LoadPool).
// (Bug #37635#)
InitItems();
// CalcOutputFactor interessiert hier nicht
}
SfxObjectShell::LoadFrom( pStor );
return bRet;
}
BOOL __EXPORT ScDocShell::ConvertFrom( SfxMedium& rMedium )
{
BOOL bRet = FALSE; // FALSE heisst Benutzerabbruch !!
// bei Fehler: Fehler am Stream setzen!!
GetUndoManager()->Clear();
// ob nach dem Import optimale Spaltenbreiten gesetzt werden sollen
BOOL bSetColWidths = FALSE;
BOOL bSetSimpleTextColWidths = FALSE;
BOOL bSimpleColWidth[MAXCOL+1];
memset( bSimpleColWidth, 1, (MAXCOL+1) * sizeof(BOOL) );
ScRange aColWidthRange;
// ob nach dem Import optimale Zeilenhoehen gesetzt werden sollen
BOOL bSetRowHeights = FALSE;
aConvFilterName.Erase(); //@ #BugId 54198
// Alle Filter brauchen die komplette Datei am Stueck (nicht asynchron),
// darum vorher per CreateFileStream dafuer sorgen, dass die komplette
// Datei uebertragen wird.
rMedium.GetPhysicalName(); //! CreateFileStream direkt rufen, wenn verfuegbar
const SfxFilter* pFilter = rMedium.GetFilter();
if (pFilter)
{
String aFltName = pFilter->GetFilterName();
aConvFilterName=aFltName; //@ #BugId 54198
BOOL bCalc3 = ( aFltName.EqualsAscii(pFilterSc30) );
BOOL bCalc4 = ( aFltName.EqualsAscii(pFilterSc40) );
if (!bCalc3 && !bCalc4)
aDocument.SetInsertingFromOtherDoc( TRUE );
if (bCalc3 || bCalc4) // Calc3/4 - "Import"
{
// wait cursor is handled with progress bar
SvStorage* pStor = rMedium.GetStorage();
if ( pStor )
{
bRet = SfxInPlaceObject::Load( pStor );
if( bRet )
bRet = LoadCalc( pStor );
if (!bRet && !pStor->GetError())
pStor->SetError( SVSTREAM_FILEFORMAT_ERROR );
}
else
DBG_ERROR("Calc3/4: kein Storage");
}
else if (aFltName.EqualsAscii(pFilterXML))
{
// prevent unnecessary broadcasts and updates
ScDocShellModificator aModificator( *this );
aDocument.SetImportingXML( TRUE );
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
pInStream->Seek( 0 );
ScXMLImportWrapper aImport( aDocument, rMedium );
bRet = aImport.Import();
if ( bRet )
{
// don't prevent establishing of listeners anymore
aDocument.SetInsertingFromOtherDoc( FALSE );
aDocument.CompileXML();
}
aDocument.SetImportingXML( FALSE );
bSetRowHeights = TRUE; // row height update is disabled during XML import
}
else if (aFltName.EqualsAscii(pFilterSc10))
{
SvStream* pStream = rMedium.GetInStream();
if (pStream)
{
FltError eError = ScImportStarCalc10( *pStream, &aDocument );
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
}
else
bRet = TRUE;
}
}
else if (aFltName.EqualsAscii(pFilterLotus))
{
// SvStream* pStream = rMedium.GetInStream();
// if (pStream)
{
FltError eError;
String sCharSet;
String sItStr;
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SFX_ITEM_SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, TRUE, &pItem ) )
{
sItStr = ((const SfxStringItem*)pItem)->GetValue();
}
if (sItStr.Len() == 0)
{
String aTitle = ScGlobal::GetRscString( STR_IMPORT_LOTUS );
sCharSet = String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM( "IBMPC (437)" ));
ScImportOptions aOptions(59, 34, sCharSet);
ScImportOptionsDlg* pDlg =
new ScImportOptionsDlg( NULL, FALSE, &aOptions, &aTitle );
int nDlgRet;
{ // WarteCursor aus und wieder einschalten
ScWaitCursorOff aWait( GetDialogParent() );
nDlgRet = pDlg->Execute();
}
if ( RET_OK == nDlgRet )
{
pDlg->GetImportOptions( aOptions );
sCharSet = aOptions.aStrFont;
SfxItemSet* pItemSet = rMedium.GetItemSet();
if (pItemSet)
pItemSet->Put(SfxStringItem(SID_FILE_FILTEROPTIONS, sCharSet));
// eError = ScImportLotus123( *pStream, &aDocument,
// GetCharsetValue(sCharSet));
ScColumn::bDoubleAlloc = TRUE;
eError = ScImportLotus123( rMedium, &aDocument,
GetCharsetValue(sCharSet));
ScColumn::bDoubleAlloc = FALSE;
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
if( ( eError & ERRCODE_WARNING_MASK ) == ERRCODE_WARNING_MASK )
bRet = TRUE;
}
else
bRet = TRUE;
}
else
{
// ConvertFrom lautlos abbrechen
SetError( ERRCODE_IO_ABORT );
bRet = FALSE;
}
delete pDlg;
}
else
{
sCharSet = sItStr;
// eError = ScImportLotus123( *pStream, &aDocument,
// GetCharsetValue(sCharSet));
ScColumn::bDoubleAlloc = TRUE;
eError = ScImportLotus123( rMedium, &aDocument,
GetCharsetValue(sCharSet));
ScColumn::bDoubleAlloc = FALSE;
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
if( ( eError & ERRCODE_WARNING_MASK ) == ERRCODE_WARNING_MASK )
bRet = TRUE;
}
else
bRet = TRUE;
}
// rMedium.CloseInStream();
}
}
else if ( aFltName.EqualsAscii(pFilterExcel4) || aFltName.EqualsAscii(pFilterExcel5) ||
aFltName.EqualsAscii(pFilterExcel95) || aFltName.EqualsAscii(pFilterExcel97) ||
aFltName.EqualsAscii(pFilterEx4Temp) || aFltName.EqualsAscii(pFilterEx5Temp) ||
aFltName.EqualsAscii(pFilterEx95Temp) || aFltName.EqualsAscii(pFilterEx97Temp) )
{
EXCIMPFORMAT eFormat = EIF_AUTO;
if ( aFltName.EqualsAscii(pFilterExcel4) || aFltName.EqualsAscii(pFilterEx4Temp) )
eFormat = EIF_BIFF_LE4;
else if ( aFltName.EqualsAscii(pFilterExcel5) || aFltName.EqualsAscii(pFilterExcel95) ||
aFltName.EqualsAscii(pFilterEx5Temp) || aFltName.EqualsAscii(pFilterEx95Temp) )
eFormat = EIF_BIFF5;
else if ( aFltName.EqualsAscii(pFilterExcel97) || aFltName.EqualsAscii(pFilterEx97Temp) )
eFormat = EIF_BIFF8;
MakeDrawLayer(); //! im Filter
ScColumn::bDoubleAlloc = TRUE;
FltError eError = ScImportExcel( rMedium, &aDocument, eFormat );
ScColumn::bDoubleAlloc = FALSE;
aDocument.UpdateFontCharSet();
if ( aDocument.IsChartListenerCollectionNeedsUpdate() )
aDocument.UpdateChartListenerCollection(); //! fuer alle Importe?
// #75299# all graphics objects must have names
aDocument.EnsureGraphicNames();
if (eError == SCWARN_IMPORT_RANGE_OVERFLOW)
{
if (!GetError())
SetError(eError);
bRet = TRUE;
}
else if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
}
else
bRet = TRUE;
bSetRowHeights = TRUE; // #75357# optimal row heights must be updated
}
else if (aFltName.EqualsAscii(pFilterAscii))
{
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
ScAsciiOptions aOptions;
BOOL bOptInit = FALSE;
if ( pSet && SFX_ITEM_SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, TRUE, &pItem ) )
{
aOptions.ReadFromString( ((const SfxStringItem*)pItem)->GetValue() );
bOptInit = TRUE;
}
if ( !bOptInit )
{
String aExt = rMedium.GetURLObject().getExtension();
String aPrivDatName = rMedium.GetURLObject().getName();
sal_Unicode cAsciiDel;
if (aExt.EqualsIgnoreCaseAscii("CSV"))
cAsciiDel = ',';
else
cAsciiDel = '\t';
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
ScImportAsciiDlg* pDlg = new ScImportAsciiDlg(
NULL,aPrivDatName,
pInStream, cAsciiDel );
int nDlgRet;
{ // WarteCursor aus und wieder einschalten
ScWaitCursorOff aWait( GetDialogParent() );
nDlgRet = pDlg->Execute();
}
if ( nDlgRet == RET_OK )
{
pDlg->GetOptions( aOptions );
SfxItemSet* pItemSet = rMedium.GetItemSet();
if (pItemSet)
pItemSet->Put(SfxStringItem(SID_FILE_FILTEROPTIONS, aOptions.WriteToString() ));
bOptInit = TRUE;
}
else
{
// ConvertFrom lautlos abbrechen
SetError( ERRCODE_IO_ABORT );
bRet = FALSE;
}
delete pDlg;
}
else
DBG_ERROR( "No Stream" );
}
if( bOptInit ) // Jetzt gesetzt ?
{
FltError eError = eERR_OK;
BOOL bOverflow = FALSE;
if( ! rMedium.IsStorage() )
{
ScImportExport aImpEx( &aDocument );
aImpEx.SetExtOptions( aOptions );
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
pInStream->SetStreamCharSet( aOptions.GetCharSet() );
pInStream->Seek( 0 );
bRet = aImpEx.ImportStream( *pInStream );
eError = bRet ? eERR_OK : SCERR_IMPORT_CONNECT;
aDocument.StartAllListeners();
aDocument.SetDirty();
bOverflow = aImpEx.IsOverflow();
}
else
DBG_ERROR( "No Stream" );
}
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
}
else if ( bOverflow )
{
if (!GetError())
SetError(SCWARN_IMPORT_RANGE_OVERFLOW);
}
bSetColWidths = TRUE;
bSetSimpleTextColWidths = TRUE;
}
}
else if (aFltName.EqualsAscii(pFilterDBase))
{
String sCharSet;
String sItStr;
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SFX_ITEM_SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, TRUE, &pItem ) )
{
sItStr = ((const SfxStringItem*)pItem)->GetValue();
}
if (sItStr.Len() == 0)
{
String aTitle = ScGlobal::GetRscString(STR_IMPORT_DBF);
sCharSet = String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM( "IBMPC" ));
ScImportOptions aOptions;
aOptions.aStrFont = sCharSet;
aOptions.eCharSet = GetCharsetValue( sCharSet );
ScImportOptionsDlg* pDlg =
new ScImportOptionsDlg( NULL, FALSE, &aOptions, &aTitle );
int nDlgRet;
{ // WarteCursor aus und wieder einschalten
ScWaitCursorOff aWait( GetDialogParent() );
nDlgRet = pDlg->Execute();
}
if ( nDlgRet == RET_OK )
{
pDlg->GetImportOptions( aOptions );
sCharSet = aOptions.aStrFont;
SfxItemSet* pItemSet = rMedium.GetItemSet();
if (pItemSet)
pItemSet->Put(SfxStringItem(SID_FILE_FILTEROPTIONS, sCharSet));
ULONG eError = DBaseImport( rMedium.GetPhysicalName(),
GetCharsetValue(sCharSet), bSimpleColWidth );
2000-09-18 16:07:07 +00:00
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
bRet = ( eError == SCWARN_IMPORT_RANGE_OVERFLOW );
}
else
bRet = TRUE;
}
else
{
// ConvertFrom lautlos abbrechen
SetError( ERRCODE_IO_ABORT );
bRet = FALSE;
}
delete pDlg;
}
else
{
sCharSet = sItStr;
ULONG eError = DBaseImport( rMedium.GetPhysicalName(),
GetCharsetValue(sCharSet), bSimpleColWidth );
2000-09-18 16:07:07 +00:00
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
bRet = ( eError == SCWARN_IMPORT_RANGE_OVERFLOW );
}
else
bRet = TRUE;
}
aColWidthRange.aStart.SetRow( 1 ); // Spaltenheader nicht
bSetColWidths = TRUE;
bSetSimpleTextColWidths = TRUE;
// Memo-Felder fuehren zu einem bSimpleColWidth[nCol]==FALSE
for ( USHORT nCol=0; nCol <= MAXCOL && !bSetRowHeights; nCol++ )
{
if ( !bSimpleColWidth[nCol] )
bSetRowHeights = TRUE;
}
}
else if (aFltName.EqualsAscii(pFilterDif))
{
SvStream* pStream = rMedium.GetInStream();
if (pStream)
{
FltError eError;
String sCharSet;
String sItStr;
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SFX_ITEM_SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, TRUE, &pItem ) )
{
sItStr = ((const SfxStringItem*)pItem)->GetValue();
}
if (sItStr.Len() == 0)
{
String aTitle = ScGlobal::GetRscString( STR_IMPORT_DIF );
sCharSet = String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM( "ANSI" ));
ScImportOptions aOptions(59, 34, sCharSet);
ScImportOptionsDlg* pDlg =
new ScImportOptionsDlg( NULL, FALSE, &aOptions, &aTitle );
int nDlgRet;
{ // WarteCursor aus und wieder einschalten
ScWaitCursorOff aWait( GetDialogParent() );
nDlgRet = pDlg->Execute();
}
if ( RET_OK == nDlgRet )
{
pDlg->GetImportOptions( aOptions );
sCharSet = aOptions.aStrFont;
SfxItemSet* pItemSet = rMedium.GetItemSet();
if (pItemSet)
pItemSet->Put(SfxStringItem(SID_FILE_FILTEROPTIONS, sCharSet));
eError = ScImportDif( *pStream, &aDocument, ScAddress(0,0,0),
GetCharsetValue(sCharSet));
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
if( ( eError & ERRCODE_WARNING_MASK ) == ERRCODE_WARNING_MASK )
bRet = TRUE;
}
else
bRet = TRUE;
}
else
{
// ConvertFrom lautlos abbrechen
SetError( ERRCODE_IO_ABORT );
bRet = FALSE;
}
delete pDlg;
}
else
{
sCharSet = sItStr;
eError = ScImportDif( *pStream, &aDocument, ScAddress(0,0,0),
GetCharsetValue(sCharSet));
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
if( ( eError & ERRCODE_WARNING_MASK ) == ERRCODE_WARNING_MASK )
bRet = TRUE;
}
else
bRet = TRUE;
}
rMedium.CloseInStream();
}
bSetColWidths = TRUE;
bSetSimpleTextColWidths = TRUE;
}
else if (aFltName.EqualsAscii(pFilterSylk))
{
FltError eError = SCERR_IMPORT_UNKNOWN;
if( !rMedium.IsStorage() )
{
ScImportExport aImpEx( &aDocument );
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
pInStream->Seek( 0 );
bRet = aImpEx.ImportStream( *pInStream, SOT_FORMATSTR_ID_SYLK );
eError = bRet ? eERR_OK : SCERR_IMPORT_UNKNOWN;
aDocument.StartAllListeners();
aDocument.SetDirty();
}
else
DBG_ERROR( "No Stream" );
}
if ( eError != eERR_OK && !GetError() )
SetError(eError);
bSetColWidths = TRUE;
bSetSimpleTextColWidths = TRUE;
}
else if (aFltName.EqualsAscii(pFilterRtf))
{
FltError eError = SCERR_IMPORT_UNKNOWN;
if( !rMedium.IsStorage() )
{
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
pInStream->Seek( 0 );
ScRange aRange;
eError = ScImportRTF( *pInStream, &aDocument, aRange );
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
if( ( eError & ERRCODE_WARNING_MASK ) == ERRCODE_WARNING_MASK )
bRet = TRUE;
}
else
bRet = TRUE;
aDocument.StartAllListeners();
aDocument.SetDirty();
bSetColWidths = TRUE;
bSetRowHeights = TRUE;
}
else
DBG_ERROR( "No Stream" );
}
if ( eError != eERR_OK && !GetError() )
SetError(eError);
}
else if (aFltName.EqualsAscii(pFilterHtml))
{
FltError eError = SCERR_IMPORT_UNKNOWN;
if( !rMedium.IsStorage() )
{
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
pInStream->Seek( 0 );
ScRange aRange;
// HTML macht eigenes ColWidth/RowHeight
CalcOutputFactor();
eError = ScImportHTML( *pInStream, &aDocument, aRange,
GetOutputFactor() );
if (eError != eERR_OK)
{
if (!GetError())
SetError(eError);
if( ( eError & ERRCODE_WARNING_MASK ) == ERRCODE_WARNING_MASK )
bRet = TRUE;
}
else
bRet = TRUE;
aDocument.StartAllListeners();
aDocument.SetDirty();
}
else
DBG_ERROR( "No Stream" );
}
if ( eError != eERR_OK && !GetError() )
SetError(eError);
}
else
{
if (!GetError())
SetError(SCERR_IMPORT_NI);
}
if (!bCalc3)
aDocument.SetInsertingFromOtherDoc( FALSE );
}
else
DBG_ERROR("Kein Filter bei ConvertFrom");
InitItems();
CalcOutputFactor();
if ( bRet && (bSetColWidths || bSetRowHeights) )
{ // Spaltenbreiten/Zeilenhoehen anpassen, Basis 100% Zoom
Fraction aZoom( 1, 1 );
double nPPTX = ScGlobal::nScreenPPTX * (double) aZoom
/ GetOutputFactor(); // Faktor ist Drucker zu Bildschirm
double nPPTY = ScGlobal::nScreenPPTY * (double) aZoom;
VirtualDevice aVirtDev;
// all sheets (for Excel import)
USHORT nTabCount = aDocument.GetTableCount();
for (USHORT nTab=0; nTab<nTabCount; nTab++)
{
USHORT nEndCol, nEndRow;
aDocument.GetCellArea( nTab, nEndCol, nEndRow );
aColWidthRange.aEnd.SetCol( nEndCol );
aColWidthRange.aEnd.SetRow( nEndRow );
ScMarkData aMark;
aMark.SetMarkArea( aColWidthRange );
aMark.MarkToMulti();
// Reihenfolge erst Breite dann Hoehe ist wichtig (vergl. hund.rtf)
if ( bSetColWidths )
{
for ( USHORT nCol=0; nCol <= nEndCol; nCol++ )
{
USHORT nWidth = aDocument.GetOptimalColWidth(
nCol, nTab, &aVirtDev, nPPTX, nPPTY, aZoom, aZoom, FALSE, &aMark,
(bSetSimpleTextColWidths && bSimpleColWidth[nCol]) );
aDocument.SetColWidth( nCol, nTab,
nWidth + (USHORT)ScGlobal::nLastColWidthExtra );
}
}
if ( bSetRowHeights )
{
// nExtra must be 0
aDocument.SetOptimalHeight( 0, nEndRow, nTab, 0, &aVirtDev,
nPPTX, nPPTY, aZoom, aZoom, FALSE );
}
}
}
FinishedLoading( SFX_LOADED_MAINDOCUMENT | SFX_LOADED_IMAGES );
// #73762# invalidate eventually temporary table areas
if ( bRet )
aDocument.InvalidateTableArea();
bIsEmpty = FALSE;
return bRet;
}
void __EXPORT ScDocShell::HandsOff()
{
SfxInPlaceObject::HandsOff();
}
BOOL __EXPORT ScDocShell::Save()
{
// DoEnterHandler hier nicht (wegen AutoSave), ist im ExecuteSave
ScChartListenerCollection* pCharts = aDocument.GetChartListenerCollection();
if (pCharts)
pCharts->UpdateDirtyCharts(); // Charts, die noch upgedated werden muessen
if (pAutoStyleList)
pAutoStyleList->ExecuteAllNow(); // Vorlagen-Timeouts jetzt ausfuehren
if (eShellMode == SFX_CREATE_MODE_STANDARD)
SvInPlaceObject::SetVisArea( Rectangle() ); // normal bearbeitet -> keine VisArea
// #77577# save additionally XML in storage
if ( GetCreateMode() != SFX_CREATE_MODE_EMBEDDED )
AddXMLAsZipToTheStorage( *GetStorage() );
// wait cursor is handled with progress bar
BOOL bRet = SfxInPlaceObject::Save();
if( bRet )
bRet = SaveCalc( GetStorage() );
return bRet;
}
BOOL __EXPORT ScDocShell::SaveAs( SvStorage* pStor )
{
// DoEnterHandler hier nicht (wegen AutoSave), ist im ExecuteSave
ScChartListenerCollection* pCharts = aDocument.GetChartListenerCollection();
if (pCharts)
pCharts->UpdateDirtyCharts(); // Charts, die noch upgedated werden muessen
if (pAutoStyleList)
pAutoStyleList->ExecuteAllNow(); // Vorlagen-Timeouts jetzt ausfuehren
if (eShellMode == SFX_CREATE_MODE_STANDARD)
SvInPlaceObject::SetVisArea( Rectangle() ); // normal bearbeitet -> keine VisArea
DBG_ASSERT( pStor, "Nanu... SaveAs ohne Storage?" );
// #77577# save additionally XML in storage
if ( GetCreateMode() != SFX_CREATE_MODE_EMBEDDED )
AddXMLAsZipToTheStorage( *pStor );
// wait cursor is handled with progress bar
BOOL bRet = SfxInPlaceObject::SaveAs( pStor );
if( bRet )
bRet = SaveCalc( pStor );
return bRet;
}
BOOL __EXPORT ScDocShell::IsInformationLost()
{
/*
const SfxFilter *pFilt = GetMedium()->GetFilter();
BOOL bRet = pFilt && pFilt->IsAlienFormat() && bNoInformLost;
if (bNoInformLost) // nur einmal!!
bNoInformLost = FALSE;
return bRet;
*/
//!!! bei Gelegenheit ein korrekte eigene Behandlung einbauen
return SfxObjectShell::IsInformationLost();
}
void ScDocShell::AsciiSave( SvStream& rStream, sal_Unicode cDelim, sal_Unicode cStrDelim,
CharSet eCharSet)
{
// could be UTF8 => ByteString, not sal_Char
ByteString aDelim( cDelim, eCharSet );
USHORT nStartCol = 0;
USHORT nStartRow = 0;
USHORT nTab = GetSaveTab();
USHORT nEndCol, nEndRow;
aDocument.GetCellArea( nTab, nEndCol, nEndRow );
ScProgress aProgress( this, ScGlobal::GetRscString( STR_SAVE_DOC ), nEndRow );
String aString;
ByteString aEmptyLine; // fuer WriteLine mit ConvertEndl
ScTabViewShell* pViewSh = PTR_CAST(ScTabViewShell, SfxViewShell::Current());
const ScViewOptions& rOpt = (pViewSh)
? pViewSh->GetViewData()->GetOptions()
: aDocument.GetViewOptions();
BOOL bShowFormulas = rOpt.GetOption( VOPT_FORMULAS );
BOOL bTabProtect = aDocument.IsTabProtected( nTab );
USHORT nCol;
USHORT nRow;
USHORT nNextCol = nStartCol;
USHORT nNextRow = nStartRow;
USHORT nEmptyCol, nEmptyRow;
SvNumberFormatter& rFormatter = *aDocument.GetFormatTable();
ScHorizontalCellIterator aIter( &aDocument, nTab, nStartCol, nStartRow,
nEndCol, nEndRow );
ScBaseCell* pCell;
while ( pCell = aIter.GetNext( nCol, nRow ) )
{
BOOL bProgress = FALSE; // nur bei Zeilenwechsel
if ( nNextRow < nRow )
{ // leere Zeilen oder/und leere Spalten bis zum Ende der Zeile
bProgress = TRUE;
if(cDelim!=0) //@ BugId 55355
for ( nEmptyCol = nNextCol; nEmptyCol < nEndCol; nEmptyCol++ )
{ // restliche Spalten der letzten Zeile
rStream.Write( aDelim.GetBuffer(), aDelim.Len() );
}
rStream.WriteLine( aEmptyLine ); // ConvertEndl
nNextRow++;
for ( nEmptyRow = nNextRow; nEmptyRow < nRow; nEmptyRow++ )
{ // ganze leere Zeilen
if(cDelim!=0) //@ BugId 55355
for ( nEmptyCol = nStartCol; nEmptyCol < nEndCol; nEmptyCol++ )
{
rStream.Write( aDelim.GetBuffer(), aDelim.Len() );
}
rStream.WriteLine( aEmptyLine ); // ConvertEndl
}
if(cDelim!=0) //@ BugId 55355
for ( nEmptyCol = nStartCol; nEmptyCol < nCol; nEmptyCol++ )
{ // leere Spalten am Anfang der Zeile
rStream.Write( aDelim.GetBuffer(), aDelim.Len() );
}
nNextRow = nRow;
}
else if ( nNextCol < nCol )
{ // leere Spalten in gleicher Zeile
if(cDelim!=0) //@ BugId 55355
for ( nEmptyCol = nNextCol; nEmptyCol < nCol; nEmptyCol++ )
{ // dazwischen liegende Spalten
rStream.Write( aDelim.GetBuffer(), aDelim.Len() );
}
}
if ( nCol == nEndCol )
{
bProgress = TRUE;
nNextCol = nStartCol;
nNextRow = nRow + 1;
}
else
nNextCol = nCol + 1;
CellType eType = pCell->GetCellType();
if ( bTabProtect )
{
const ScProtectionAttr* pProtAttr =
(const ScProtectionAttr*) aDocument.GetAttr(
nCol, nRow, nTab, ATTR_PROTECTION );
if ( pProtAttr->GetHideCell() ||
( eType == CELLTYPE_FORMULA && bShowFormulas &&
pProtAttr->GetHideFormula() ) )
eType = CELLTYPE_NONE; // ausblenden
}
BOOL bString;
switch ( eType )
{
case CELLTYPE_NOTE:
case CELLTYPE_NONE:
aString.Erase();
bString = FALSE;
break;
case CELLTYPE_FORMULA :
{
USHORT nErrCode;
if ( bShowFormulas )
{
((ScFormulaCell*)pCell)->GetFormula( aString );
bString = TRUE;
}
else if ( nErrCode = ((ScFormulaCell*)pCell)->GetErrCode() )
{
aString = ScGlobal::GetErrorString( nErrCode );
bString = TRUE;
}
else if ( ((ScFormulaCell*)pCell)->IsValue() )
{
ULONG nFormat;
aDocument.GetNumberFormat( nCol, nRow, nTab, nFormat );
ScCellFormat::GetInputString( pCell, nFormat, aString, rFormatter );
bString = FALSE;
}
else
{
((ScFormulaCell*)pCell)->GetString( aString );
bString = TRUE;
}
}
break;
case CELLTYPE_STRING :
((ScStringCell*)pCell)->GetString( aString );
bString = TRUE;
break;
case CELLTYPE_EDIT :
((ScEditCell*)pCell)->GetString( aString );
bString = TRUE;
break;
case CELLTYPE_VALUE :
{
ULONG nFormat;
aDocument.GetNumberFormat( nCol, nRow, nTab, nFormat );
ScCellFormat::GetInputString( pCell, nFormat, aString, rFormatter );
bString = FALSE;
}
break;
default:
DBG_ERROR( "ScDocShell::AsciiSave: unknown CellType" );
aString.Erase();
bString = FALSE;
}
if ( bString )
{
if(cStrDelim!=0) //@ BugId 55355
{
xub_StrLen nPos = aString.Search( cStrDelim );
while (nPos != STRING_NOTFOUND)
{
aString.Insert(cStrDelim, nPos);
nPos = aString.Search(cStrDelim, nPos+2);
}
}
if(cStrDelim!=0) //@ BugId 55355
{
aString.Insert( cStrDelim, 0 );
aString += cStrDelim;
}
ByteString aByteStr( aString, eCharSet );
rStream.Write( aByteStr.GetBuffer(), aByteStr.Len() );
}
else
{
ByteString aByteStr( aString, eCharSet );
rStream.Write( aByteStr.GetBuffer(), aByteStr.Len() );
}
if( nCol < nEndCol )
{
if(cDelim!=0) //@ BugId 55355
rStream.Write( aDelim.GetBuffer(), aDelim.Len() );
}
else
rStream.WriteLine( aEmptyLine ); // ConvertEndl
if ( bProgress )
aProgress.SetStateOnPercent( nRow );
}
// was noch gewuenscht ist leer rausschreiben
if ( nNextRow <= nEndRow )
{
if(cDelim!=0) //@ BugId 55355
for ( nEmptyCol = nNextCol; nEmptyCol < nEndCol; nEmptyCol++ )
{ // restliche Spalten der letzten Zeile
rStream.Write( aDelim.GetBuffer(), aDelim.Len() );
}
rStream.WriteLine( aEmptyLine ); // ConvertEndl
nNextRow++;
}
for ( nEmptyRow = nNextRow; nEmptyRow <= nEndRow; nEmptyRow++ )
{ // ganze leere Zeilen
if(cDelim!=0) //@ BugId 55355
for ( nEmptyCol = nStartCol; nEmptyCol < nEndCol; nEmptyCol++ )
{
rStream.Write( aDelim.GetBuffer(), aDelim.Len() );
}
rStream.WriteLine( aEmptyLine ); // ConvertEndl
}
}
BOOL __EXPORT ScDocShell::ConvertTo( SfxMedium &rMed )
{
DoEnterHandler(); // nicht abgeschlossene Zelle beenden
if (pAutoStyleList)
pAutoStyleList->ExecuteAllNow(); // Vorlagen-Timeouts jetzt ausfuehren
if (eShellMode == SFX_CREATE_MODE_STANDARD)
SvInPlaceObject::SetVisArea( Rectangle() ); // normal bearbeitet -> keine VisArea
DBG_ASSERT( rMed.GetFilter(), "Filter == 0" );
BOOL bRet = FALSE;
String aFltName = rMed.GetFilter()->GetFilterName();
/*
if (aFltName.EqualsAscii(pFilterLotus))
{
SvStream* pStream = rMed.GetOutStream();
if (pStream)
{
FltError eError = ScExportLotus123( *pStream, &aDocument, ExpWK1,
CHARSET_IBMPC_437 );
bRet = eError == eERR_OK;
}
}
else
*/
if ( aFltName.EqualsAscii(pFilterSc30) || aFltName.EqualsAscii(pFilterSc40) )
{
// Calc3/4 - "Export"
//! wird nicht gerufen (geht ueber Save/SaveAs) - wird das noch gebraucht ???????
DBG_ERROR("ConvertTo fuer altes Calc gibt's noch...");
SvStorage* pStor = rMed.GetStorage();
if ( pStor )
{
// wait cursor is handled with progress bar
bRet = SfxInPlaceObject::SaveAs( pStor );
if( bRet )
bRet = SaveCalc( pStor );
String aShortTypeName = String( ScResId(SCSTR_SHORT_SCDOC_NAME) ); // "Dokument"
if ( aFltName.EqualsAscii(pFilterSc30) )
{
// Ole-Geraffel auf 3.0-Werte setzen:
SvGlobalName aName( SO3_SC_CLASSID_30 );
UINT32 nClip = SOT_FORMATSTR_ID_STARCALC_30;
pStor->SetClass( aName, nClip, aShortTypeName );
}
else
{
// Ole-Geraffel auf 4.0-Werte setzen:
SvGlobalName aName( SO3_SC_CLASSID_40 );
UINT32 nClip = SOT_FORMATSTR_ID_STARCALC_40;
pStor->SetClass( aName, nClip, aShortTypeName );
}
}
}
else if (aFltName.EqualsAscii(pFilterXML))
{
ScXMLImportWrapper aImport( aDocument, rMed );
bRet = aImport.Export();
}
else if (aFltName.EqualsAscii(pFilterExcel5) || aFltName.EqualsAscii(pFilterExcel95) ||
aFltName.EqualsAscii(pFilterExcel97) || aFltName.EqualsAscii(pFilterEx5Temp) ||
aFltName.EqualsAscii(pFilterEx95Temp) || aFltName.EqualsAscii(pFilterEx97Temp))
{
WaitObject aWait( GetDialogParent() );
BOOL bFake97 = ( aFltName.EqualsAscii(pFilterExcel97) || aFltName.EqualsAscii(pFilterEx97Temp) );
FltError eError = ScExportExcel5( rMed, &aDocument, bFake97, RTL_TEXTENCODING_MS_1252 );
if (eError && !GetError())
SetError(eError);
if( ( eError & ERRCODE_WARNING_MASK ) == ERRCODE_WARNING_MASK )
bRet = TRUE;
else
bRet = eError == eERR_OK;
}
else if (aFltName.EqualsAscii(pFilterAscii))
{
SvStream* pStream = rMed.GetOutStream();
if (pStream)
{
String sCharSet;
sal_Unicode cAsciiDel;
sal_Unicode cStrDel;
String sItStr;
SfxItemSet* pSet = rMed.GetItemSet();
BOOL bShowDlg=FALSE;
BOOL bCancel=FALSE;
const SfxPoolItem* pDlgItem;
if (pSet&& SFX_ITEM_SET ==
pSet->GetItemState( SID_USE_FILTEROPTIONS, TRUE, &pDlgItem ) )
{
bShowDlg=((const SfxBoolItem*)pDlgItem)->GetValue();
}
const SfxPoolItem* pItem;
if ( pSet && SFX_ITEM_SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, TRUE, &pItem ) )
{
sItStr = ((const SfxStringItem*)pItem)->GetValue();
}
if (sItStr.Len() == 0 || bShowDlg)
{
if (aDocument.GetTableCount() > 1)
if (!rMed.GetError())
rMed.SetError(SCWARN_EXPORT_ASCII);
sCharSet = String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM( "SYSTEM" ));
cStrDel = '"';
String aExt = rMed.GetName().Copy(rMed.GetName().Len()-3, 3);
if (aExt.EqualsIgnoreCaseAscii("CSV"))
cAsciiDel = ',';
else
cAsciiDel = '\t';
ScImportOptions aOptions((USHORT)cAsciiDel, (USHORT)cStrDel, sCharSet);
String aTitle = ScGlobal::GetRscString( STR_EXPORT_ASCII );
ScImportOptionsDlg* pDlg =
new ScImportOptionsDlg( NULL, TRUE, &aOptions, &aTitle );
if ( pDlg->Execute() == RET_OK )
{
WaitObject aWait( GetDialogParent() );
pDlg->GetImportOptions( aOptions );
cAsciiDel = (sal_Unicode) aOptions.nFieldSepCode;
cStrDel = (sal_Unicode) aOptions.nTextSepCode;
sCharSet = aOptions.aStrFont;
sItStr = aOptions.BuildString();
SfxItemSet* pItemSet = rMed.GetItemSet();
if (pItemSet)
pItemSet->Put(SfxStringItem(SID_FILE_FILTEROPTIONS, sItStr));
AsciiSave( *pStream, cAsciiDel, cStrDel,
GetCharsetValue(sCharSet));
}
else
{
bCancel = TRUE;
SetError( ERRCODE_IO_ABORT );
}
delete pDlg;
}
else
{
WaitObject aWait( GetDialogParent() );
ScImportOptions aOptions( sItStr );
cAsciiDel = (sal_Unicode)aOptions.nFieldSepCode;
cStrDel = (sal_Unicode)aOptions.nTextSepCode;
sCharSet = aOptions.aStrFont;
AsciiSave( *pStream, cAsciiDel, cStrDel, GetCharsetValue(sCharSet));
}
bRet = !bCancel;
}
}
else if (aFltName.EqualsAscii(pFilterDBase))
{
BOOL bCancel = FALSE;
String sCharSet;
SfxItemSet* pSet = rMed.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SFX_ITEM_SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, TRUE, &pItem ) )
{
sCharSet = ((const SfxStringItem*)pItem)->GetValue();
if ( pSet->GetItemState( SID_USE_FILTEROPTIONS, TRUE, &pItem ) == SFX_ITEM_SET &&
((const SfxBoolItem*)pItem)->GetValue() )
{
sCharSet.Erase(); // "edit options" - forget old
}
}
if (sCharSet.Len() == 0)
{
sCharSet = String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM( "IBMPC" ));
ScImportOptions aOptions(59, 34, sCharSet);
String aTitle = ScGlobal::GetRscString( STR_EXPORT_DBF );
ScImportOptionsDlg* pDlg =
new ScImportOptionsDlg( NULL, FALSE, &aOptions, &aTitle );
if ( pDlg->Execute() == RET_OK )
{
pDlg->GetImportOptions( aOptions );
sCharSet = aOptions.aStrFont;
SfxItemSet* pItemSet = rMed.GetItemSet();
if (pItemSet)
pItemSet->Put(SfxStringItem(SID_FILE_FILTEROPTIONS, sCharSet));
}
else
bCancel = TRUE;
delete pDlg;
}
if ( bCancel )
{
SetError( ERRCODE_IO_ABORT );
}
else
{
WaitObject aWait( GetDialogParent() );
DirEntry aTmpFile( rMed.GetPhysicalName() );
// HACK damit Sba geoffnetes TempFile ueberschreiben kann
rMed.CloseOutStream();
BOOL bHasMemo = FALSE;
ULONG eError = DBaseExport( rMed.GetPhysicalName(),
GetCharsetValue(sCharSet), bHasMemo );
2000-09-18 16:07:07 +00:00
if ( eError != eERR_OK && (eError & ERRCODE_WARNING_MASK) )
{
//! if ( !rMed.GetError() )
//! rMed.SetError( eError );
2000-09-18 16:07:07 +00:00
eError = eERR_OK;
}
//! else if ( aDocument.GetTableCount() > 1 && !rMed.GetError() )
//! rMed.SetError( SCWARN_EXPORT_ASCII );
2000-09-18 16:07:07 +00:00
if ( bHasMemo )
aTmpFile.SetExtension( String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("dbt")) );
if ( eError != eERR_OK )
{
if (!GetError())
SetError(eError);
if ( bHasMemo && aTmpFile.Exists() )
aTmpFile.Kill();
}
else
{
bRet = TRUE;
if ( bHasMemo )
{
SfxStringItem* pNameItem =
(SfxStringItem*) rMed.GetItemSet()->GetItem( SID_FILE_NAME );
DirEntry aDbtFile( pNameItem->GetValue() );
aDbtFile.SetExtension( String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("dbt")) );
if ( aDbtFile.Exists() && aDbtFile.Kill() )
bRet = FALSE;
if ( bRet && aTmpFile.MoveTo( aDbtFile ) )
bRet = FALSE;
if ( !bRet )
{
if ( aTmpFile.Exists() )
aTmpFile.Kill();
if ( !GetError() )
SetError( SCERR_EXPORT_DATA );
}
}
}
}
}
else if (aFltName.EqualsAscii(pFilterDif))
{
SvStream* pStream = rMed.GetOutStream();
if (pStream)
{
BOOL bCancel = FALSE;
String sCharSet;
String sItStr;
SfxItemSet* pSet = rMed.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SFX_ITEM_SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, TRUE, &pItem ) )
{
sItStr = ((const SfxStringItem*)pItem)->GetValue();
}
if (sItStr.Len() == 0)
{
if (aDocument.GetTableCount() > 1)
if (!rMed.GetError())
rMed.SetError(SCWARN_EXPORT_ASCII);
sCharSet = String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM( "ANSI" ));
ScImportOptions aOptions(59, 34, sCharSet);
String aTitle = ScGlobal::GetRscString( STR_EXPORT_DIF );
ScImportOptionsDlg* pDlg =
new ScImportOptionsDlg( NULL, FALSE, &aOptions, &aTitle );
if ( pDlg->Execute() == RET_OK )
{
WaitObject aWait( GetDialogParent() );
pDlg->GetImportOptions( aOptions );
sCharSet = aOptions.aStrFont;
SfxItemSet* pItemSet = rMed.GetItemSet();
if (pItemSet)
pItemSet->Put(SfxStringItem(SID_FILE_FILTEROPTIONS, sCharSet));
USHORT nTab = GetSaveTab();
ScExportDif( *pStream, &aDocument, ScAddress(0,0,nTab), GetCharsetValue(sCharSet) );
}
else
{
bCancel = TRUE;
SetError( ERRCODE_IO_ABORT );
}
delete pDlg;
}
else
{
WaitObject aWait( GetDialogParent() );
sCharSet = sItStr;
ScExportDif( *pStream, &aDocument, ScAddress(0,0,0), GetCharsetValue(sCharSet) );
}
bRet = !bCancel;
}
}
else if (aFltName.EqualsAscii(pFilterSylk))
{
SvStream* pStream = rMed.GetOutStream();
if ( pStream )
{
WaitObject aWait( GetDialogParent() );
// Formeln mit exportieren?
ScTabViewShell* pViewSh = PTR_CAST(ScTabViewShell, SfxViewShell::Current());
const ScViewOptions& rOpt = (pViewSh)
? pViewSh->GetViewData()->GetOptions()
: aDocument.GetViewOptions();
BOOL bShowFormulas = rOpt.GetOption( VOPT_FORMULAS );
USHORT nEndCol, nEndRow;
aDocument.GetCellArea( 0, nEndCol, nEndRow );
ScRange aRange( 0,0,0, nEndCol,nEndRow,0 );
ScImportExport aImExport( &aDocument, aRange );
aImExport.SetFormulas(bShowFormulas);
bRet = aImExport.ExportStream( *pStream, SOT_FORMATSTR_ID_SYLK );
}
}
else if (aFltName.EqualsAscii(pFilterHtml))
{
SvStream* pStream = rMed.GetOutStream();
if ( pStream )
{
WaitObject aWait( GetDialogParent() );
ScImportExport aImExport( &aDocument );
aImExport.SetStreamPath( rMed.GetName() );
bRet = aImExport.ExportStream( *pStream, SOT_FORMATSTR_ID_HTML );
}
}
else
{
if (GetError())
SetError(SCERR_IMPORT_NI);
}
return bRet;
}
BOOL __EXPORT ScDocShell::SaveCompleted( SvStorage * pStor )
{
return SfxInPlaceObject::SaveCompleted( pStor );
}
BOOL __EXPORT ScDocShell::DoSaveCompleted( SfxMedium * pNewStor )
{
BOOL bRet = SfxObjectShell::DoSaveCompleted( pNewStor );
// SC_HINT_DOC_SAVED fuer Wechsel ReadOnly -> Read/Write
Broadcast( SfxSimpleHint( SC_HINT_DOC_SAVED ) );
return bRet;
}
USHORT __EXPORT ScDocShell::PrepareClose( BOOL bUI, BOOL bForBrowsing )
{
if(SC_MOD()->GetCurRefDlgId()>0)
{
SfxViewFrame* pFrame = SfxViewFrame::GetFirst( this, TYPE(SfxTopViewFrame) );
if( pFrame )
{
SfxViewShell* p = pFrame->GetViewShell();
ScTabViewShell* pViewSh = PTR_CAST(ScTabViewShell,p);
if(pViewSh!=NULL)
{
Window *pWin=pViewSh->GetWindow();
if(pWin!=NULL) pWin->GrabFocus();
}
}
return FALSE;
}
if ( aDocument.IsInLinkUpdate() || aDocument.IsInInterpreter() )
{
ErrorMessage(STR_CLOSE_ERROR_LINK);
return FALSE;
}
DoEnterHandler();
USHORT nRet = SfxObjectShell::PrepareClose( bUI, bForBrowsing );
if (nRet == TRUE) // TRUE = schliessen
aDocument.DisableIdle(TRUE); // nicht mehr drin rumpfuschen !!!
return nRet;
}
void ScDocShell::PrepareReload()
{
SfxObjectShell::PrepareReload(); // tut nichts?
// Das Disconnect von DDE-Links kann Reschedule ausloesen.
// Wenn die DDE-Links erst im Dokument-dtor geloescht werden, kann beim Reload
// aus diesem Reschedule das DDE-Link-Update fuer das neue Dokument ausgeloest
// werden. Dabei verklemmt sicht dann irgendwas.
// -> Beim Reload die DDE-Links des alten Dokuments vorher disconnecten
aDocument.DisconnectDdeLinks();
}
String ScDocShell::GetOwnFilterName() // static
{
return String::CreateFromAscii(pFilterSc50);
}
BOOL ScDocShell::HasAutomaticTableName( const String& rFilter ) // static
{
// TRUE for those filters that keep the default table name
// (which is language specific)
return rFilter.EqualsAscii( pFilterAscii )
|| rFilter.EqualsAscii( pFilterLotus )
|| rFilter.EqualsAscii( pFilterExcel4 )
|| rFilter.EqualsAscii( pFilterEx4Temp )
|| rFilter.EqualsAscii( pFilterDBase )
|| rFilter.EqualsAscii( pFilterDif )
|| rFilter.EqualsAscii( pFilterSylk )
|| rFilter.EqualsAscii( pFilterHtml )
|| rFilter.EqualsAscii( pFilterRtf );
}
//==================================================================
#define __SCDOCSHELL_INIT \
aDocument ( SCDOCMODE_DOCUMENT, this ), \
pUndoManager ( NULL ), \
pFontList ( NULL ), \
bHeaderOn ( TRUE ), \
bFooterOn ( TRUE ), \
pDocHelper ( NULL ), \
pAutoStyleList ( NULL ), \
pOldJobSetup ( NULL ), \
pPaintLockData ( NULL ), \
nPrtToScreenFactor( 1.0 ), \
bIsEmpty ( TRUE ), \
bIsInUndo ( FALSE ), \
bDocumentModifiedPending( FALSE )
//------------------------------------------------------------------
ScDocShell::ScDocShell( const ScDocShell& rShell )
: SfxObjectShell( rShell.GetCreateMode() ),
aDdeTextFmt(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("TEXT"))),
bNoInformLost( TRUE ),
__SCDOCSHELL_INIT
{
SetPool( &SC_MOD()->GetPool() );
SetShell(this);
eShellMode = rShell.eShellMode;
bIsInplace = rShell.bIsInplace;
pDocFunc = new ScDocFunc(*this);
// SetBaseModel needs exception handling
ScModelObj::CreateAndSet( this );
StartListening(*this);
SfxStyleSheetPool* pStlPool = aDocument.GetStyleSheetPool();
if (pStlPool)
StartListening(*pStlPool);
GetPageOnFromPageStyleSet( NULL, 0, bHeaderOn, bFooterOn );
SetHelpId( HID_SCSHELL_DOCSH );
// InitItems und CalcOutputFactor werden jetzt nach bei Load/ConvertFrom/InitNew gerufen
}
//------------------------------------------------------------------
ScDocShell::ScDocShell( SfxObjectCreateMode eMode )
: SfxObjectShell( eMode ),
aDdeTextFmt(String::CreateFromAscii(RTL_CONSTASCII_STRINGPARAM("TEXT"))),
bNoInformLost( TRUE ),
__SCDOCSHELL_INIT
{
SetPool( &SC_MOD()->GetPool() );
SetShell(this);
eShellMode = eMode;
bIsInplace = (eShellMode == SFX_CREATE_MODE_EMBEDDED);
// wird zurueckgesetzt, wenn nicht inplace
pDocFunc = new ScDocFunc(*this);
// SetBaseModel needs exception handling
ScModelObj::CreateAndSet( this );
StartListening(*this);
SfxStyleSheetPool* pStlPool = aDocument.GetStyleSheetPool();
if (pStlPool)
StartListening(*pStlPool);
SetHelpId( HID_SCSHELL_DOCSH );
// InitItems und CalcOutputFactor werden jetzt nach bei Load/ConvertFrom/InitNew gerufen
}
//------------------------------------------------------------------
__EXPORT ScDocShell::~ScDocShell()
{
ResetDrawObjectShell(); // #55570# falls der Drawing-Layer noch versucht, darauf zuzugreifen
SfxStyleSheetPool* pStlPool = aDocument.GetStyleSheetPool();
if (pStlPool)
EndListening(*pStlPool);
EndListening(*this);
delete pAutoStyleList;
SfxApplication *pSfxApp = SFX_APP();
if ( pSfxApp->GetDdeService() ) // DDE vor Dokument loeschen
pSfxApp->RemoveDdeTopic( this );
delete pDocFunc;
delete pUndoManager;
delete pFontList;
delete pPaintLockData;
delete pOldJobSetup; // gesetzt nur bei Fehler in StartJob()
}
//------------------------------------------------------------------
SfxUndoManager* __EXPORT ScDocShell::GetUndoManager()
{
if (!pUndoManager)
pUndoManager = new SfxUndoManager;
return pUndoManager;
}
void ScDocShell::SetModified( BOOL bModified )
{
SfxInPlaceObject::SetModified( bModified );
Broadcast( SfxSimpleHint( SFX_HINT_DOCCHANGED ) );
}
void ScDocShell::SetDocumentModified( BOOL bIsModified /* = TRUE */ )
{
// BroadcastUno muss auch mit pPaintLockData sofort passieren
//! auch bei SetDrawModified, wenn Drawing angebunden ist
//! dann eigener Hint???
if (bIsModified)
aDocument.BroadcastUno( SfxSimpleHint( SFX_HINT_DATACHANGED ) );
if ( pPaintLockData && bIsModified )
{
pPaintLockData->SetModified(); // spaeter...
return;
}
SetDrawModified( bIsModified );
if ( bIsModified )
{
if ( aDocument.IsAutoCalcShellDisabled() )
SetDocumentModifiedPending( TRUE );
else
{
SetDocumentModifiedPending( FALSE );
aDocument.InvalidateTableArea();
aDocument.Broadcast( SC_HINT_DATACHANGED, BCA_BRDCST_ALWAYS, NULL );
if ( aDocument.IsForcedFormulaPending() && aDocument.GetAutoCalc() )
aDocument.CalcFormulaTree( TRUE );
PostDataChanged();
// automatisches Detektiv-Update
if ( aDocument.IsDetectiveDirty() )
{
aDocument.SetDetectiveDirty(FALSE); // bei jedem Modified
ScDetOpList* pList = aDocument.GetDetOpList();
if ( pList && pList->Count() && !IsInUndo() &&
SC_MOD()->GetAppOptions().GetDetectiveAuto() )
{
GetDocFunc().DetectiveRefresh(TRUE); // TRUE = automatisch erzeugt
}
}
}
}
}
// SetDrawModified - ohne Formel-Update
// (Drawing muss auch beim normalen SetDocumentModified upgedated werden,
// z.B. bei Tabelle loeschen etc.)
void ScDocShell::SetDrawModified( BOOL bIsModified /* = TRUE */ )
{
BOOL bUpdate = ( bIsModified != IsModified() );
SetModified( bIsModified );
if (bUpdate)
{
2000-09-22 17:57:10 +00:00
SfxBindings* pBindings = GetViewBindings();
if (pBindings)
{
pBindings->Invalidate( SID_SAVEDOC );
pBindings->Invalidate( SID_DOC_MODIFIED );
}
2000-09-18 16:07:07 +00:00
}
if (bIsModified)
{
if ( aDocument.IsChartListenerCollectionNeedsUpdate() )
{
aDocument.UpdateChartListenerCollection();
SFX_APP()->Broadcast(SfxSimpleHint( SC_HINT_DRAW_CHANGED )); // Navigator
}
SC_MOD()->AnythingChanged();
}
}
void ScDocShell::SetInUndo(BOOL bSet)
{
bIsInUndo = bSet;
}
void ScDocShell::GetDocStat( ScDocStat& rDocStat )
{
SfxPrinter* pPrinter = GetPrinter();
aDocument.GetDocStat( rDocStat );
rDocStat.nPageCount = 0;
if ( pPrinter )
for ( USHORT i=0; i<rDocStat.nTableCount; i++ )
rDocStat.nPageCount +=
(USHORT) ScPrintFunc( this, pPrinter, i ).GetTotalPages();
}
SfxDocumentInfoDialog* __EXPORT ScDocShell::CreateDocumentInfoDialog(
Window *pParent, const SfxItemSet &rSet )
{
SfxDocumentInfoDialog* pDlg = new SfxDocumentInfoDialog( pParent, rSet );
ScDocShell* pDocSh = PTR_CAST(ScDocShell,SfxObjectShell::Current());
//nur mit Statistik, wenn dieses Doc auch angezeigt wird, nicht
//aus dem Doc-Manager
if( pDocSh == this )
pDlg->AddTabPage( 42,
ScGlobal::GetRscString( STR_DOC_STAT ),
ScDocStatPage::Create,
NULL );
return pDlg;
}
Window* ScDocShell::GetDialogParent()
{
ScTabViewShell* pViewSh = ScTabViewShell::GetActiveViewShell();
if ( pViewSh )
return pViewSh->GetDialogParent();
else
return Application::GetDefDialogParent();
}
// --- ScDocShellModificator ------------------------------------------
ScDocShellModificator::ScDocShellModificator( ScDocShell& rDS ) :
rDocShell( rDS )
{
ScDocument* pDoc = rDocShell.GetDocument();
bAutoCalcShellDisabled = pDoc->IsAutoCalcShellDisabled();
bIdleDisabled = pDoc->IsIdleDisabled();
pDoc->SetAutoCalcShellDisabled( TRUE );
pDoc->DisableIdle( TRUE );
}
ScDocShellModificator::~ScDocShellModificator()
{
ScDocument* pDoc = rDocShell.GetDocument();
pDoc->SetAutoCalcShellDisabled( bAutoCalcShellDisabled );
if ( !bAutoCalcShellDisabled && rDocShell.IsDocumentModifiedPending() )
rDocShell.SetDocumentModified(); // der letzte macht das Licht aus
pDoc->DisableIdle( bIdleDisabled );
}
void ScDocShellModificator::SetDocumentModified()
{
ScDocument* pDoc = rDocShell.GetDocument();
if ( !pDoc->IsImportingXML() )
{
// AutoCalcShellDisabled temporaer restaurieren
BOOL bDisabled = pDoc->IsAutoCalcShellDisabled();
pDoc->SetAutoCalcShellDisabled( bAutoCalcShellDisabled );
rDocShell.SetDocumentModified();
pDoc->SetAutoCalcShellDisabled( bDisabled );
}
else
{
// uno broadcast is necessary for api to work
// -> must also be done during xml import
pDoc->BroadcastUno( SfxSimpleHint( SFX_HINT_DATACHANGED ) );
}
}