2010-10-27 12:45:03 +01:00
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
2012-06-12 17:02:47 +01:00
/*
* This file is part of the LibreOffice project .
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License , v . 2.0 . If a copy of the MPL was not distributed with this
* file , You can obtain one at http : //mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice :
*
* Licensed to the Apache Software Foundation ( ASF ) under one or more
* contributor license agreements . See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership . The ASF licenses this file to you under the Apache
* License , Version 2.0 ( the " License " ) ; you may not use this file
* except in compliance with the License . You may obtain a copy of
* the License at http : //www.apache.org/licenses/LICENSE-2.0 .
*/
2012-08-17 07:29:20 +02:00
# ifndef BASCTL_BASIDESH_HXX
# define BASCTL_BASIDESH_HXX
2007-03-15 15:01:29 +00:00
2011-11-06 21:21:30 -05:00
# include "doceventnotifier.hxx"
2007-03-15 15:01:29 +00:00
# include "sbxitem.hxx"
2012-08-17 07:29:20 +02:00
# include "../basicide/objdlg.hxx"
2007-03-15 15:01:29 +00:00
2011-11-06 21:21:30 -05:00
# include <com/sun/star/container/XContainerListener.hpp>
2007-03-15 15:01:29 +00:00
# include <sfx2/viewsh.hxx>
# include <svx/ifaceids.hxx>
2011-11-06 21:21:30 -05:00
# include <vcl/scrbar.hxx>
2012-03-20 10:03:56 +02:00
# include <map>
2012-08-17 07:29:20 +02:00
# include <boost/scoped_ptr.hpp>
2007-03-15 15:01:29 +00:00
2011-11-06 21:21:30 -05:00
class SfxViewFactory ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
class SdrView ;
class TabBar ;
class SbxObject ;
class SbModule ;
class StarBASIC ;
2007-08-03 09:00:00 +00:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
namespace basctl
{
2007-03-15 15:01:29 +00:00
//----------------------------------------------------------------------------
2011-01-14 11:16:25 +01:00
const sal_uLong BASICIDE_UI_FEATURE_SHOW_BROWSER = 0x00000001 ;
2007-03-15 15:01:29 +00:00
//----------------------------------------------------------------------------
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
class Layout ;
class ModulWindow ;
class ModulWindowLayout ;
class DialogWindow ;
class DialogWindowLayout ;
2007-03-15 15:01:29 +00:00
class TabBar ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
class BaseWindow ;
2007-03-15 15:01:29 +00:00
class LocalizationMgr ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
bool RemoveDialog ( const ScriptDocument & rDocument , const : : rtl : : OUString & rLibName , const : : rtl : : OUString & rDlgName ) ;
2008-07-07 11:23:48 +00:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
class Shell :
2012-08-17 07:29:20 +02:00
public SfxViewShell ,
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
public DocumentEventListener
2007-03-15 15:01:29 +00:00
{
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
public :
typedef std : : map < sal_uInt16 , BaseWindow * > WindowTable ;
typedef WindowTable : : const_iterator WindowTableIt ;
2012-08-17 07:29:20 +02:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
private :
2012-08-17 07:29:20 +02:00
friend class JavaDebuggingListenerImpl ;
friend class LocalizationMgr ;
2012-09-02 16:21:08 +02:00
friend bool implImportDialog ( Window * pWin , const : : rtl : : OUString & rCurPath , const ScriptDocument & rDocument , const : : rtl : : OUString & aLibName ) ; // defined in baside3.cxx
2012-08-17 07:29:20 +02:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
WindowTable aWindowTable ;
2012-08-17 07:29:20 +02:00
sal_uInt16 nCurKey ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
BaseWindow * pCurWin ;
2007-03-15 15:01:29 +00:00
ScriptDocument m_aCurDocument ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
rtl : : OUString m_aCurLibName ;
2012-01-20 20:23:06 -05:00
boost : : shared_ptr < LocalizationMgr > m_pCurLocalizationMgr ;
2007-03-15 15:01:29 +00:00
ScrollBar aHScrollBar ;
ScrollBar aVScrollBar ;
ScrollBarBox aScrollBarBox ;
2012-09-02 16:21:08 +02:00
boost : : scoped_ptr < TabBar > pTabBar ; // basctl::TabBar
2012-08-02 10:21:00 +09:00
bool bTabBarSplitted ;
bool bCreatingWindow ;
2012-08-17 07:29:20 +02:00
// layout windows
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
boost : : scoped_ptr < ModulWindowLayout > pModulLayout ;
boost : : scoped_ptr < DialogWindowLayout > pDialogLayout ;
2012-08-17 07:29:20 +02:00
// the active layout window
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
Layout * pLayout ;
2012-08-17 07:29:20 +02:00
// common object catalog window
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
ObjectCatalog aObjectCatalog ;
2012-08-17 07:29:20 +02:00
2012-08-07 08:36:40 +02:00
bool m_bAppBasicModified ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
DocumentEventNotifier m_aNotifier ;
2012-08-17 07:29:20 +02:00
friend class ContainerListenerImpl ;
2010-03-02 12:39:31 +00:00
: : com : : sun : : star : : uno : : Reference < : : com : : sun : : star : : container : : XContainerListener > m_xLibListener ;
2007-03-15 15:01:29 +00:00
# if _SOLAR__PRIVATE
void Init ( ) ;
void InitTabBar ( ) ;
void InitScrollBars ( ) ;
void CheckWindows ( ) ;
2012-07-31 10:14:06 +09:00
void RemoveWindows ( const ScriptDocument & rDocument , const : : rtl : : OUString & rLibName , bool bDestroy ) ;
2007-03-15 15:01:29 +00:00
void UpdateWindows ( ) ;
void InvalidateBasicIDESlots ( ) ;
2012-07-31 10:14:06 +09:00
void StoreAllWindowData ( bool bPersistent = true ) ;
2007-03-15 15:01:29 +00:00
void SetMDITitle ( ) ;
2012-07-31 10:14:06 +09:00
void EnableScrollbars ( bool bEnable ) ;
2011-12-09 01:58:49 -05:00
void SetCurLib ( const ScriptDocument & rDocument , : : rtl : : OUString aLibName , bool bUpdateWindows = true , bool bCheck = true ) ;
void SetCurLibForLocalization ( const ScriptDocument & rDocument , : : rtl : : OUString aLibName ) ;
2007-03-15 15:01:29 +00:00
void ImplStartListening ( StarBASIC * pBasic ) ;
DECL_LINK ( TabBarHdl , TabBar * ) ;
DECL_LINK ( TabBarSplitHdl , TabBar * ) ;
# endif
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
static unsigned nShellCount ;
2012-09-02 16:21:08 +02:00
private :
2007-03-15 15:01:29 +00:00
virtual void AdjustPosSizePixel ( const Point & rPos , const Size & rSize ) ;
virtual void OuterResizePixel ( const Point & rPos , const Size & rSize ) ;
virtual Size GetOptimalSizePixel ( ) const ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
sal_uInt16 InsertWindowInTable ( BaseWindow * pNewWin ) ;
2011-01-14 11:16:25 +01:00
virtual sal_uInt16 PrepareClose ( sal_Bool bUI , sal_Bool bForBrowsing ) ;
2007-03-15 15:01:29 +00:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
void SetCurWindow ( BaseWindow * pNewWin , bool bUpdateTabBar = false , bool bRememberAsCurrent = true ) ;
2007-06-26 15:53:07 +00:00
void ManageToolbars ( ) ;
2007-03-15 15:01:29 +00:00
void ArrangeTabBar ( ) ;
2011-12-09 01:58:49 -05:00
ModulWindow * CreateBasWin ( const ScriptDocument & rDocument , const : : rtl : : OUString & rLibName , const : : rtl : : OUString & rModName ) ;
DialogWindow * CreateDlgWin ( const ScriptDocument & rDocument , const : : rtl : : OUString & rLibName , const : : rtl : : OUString & rDlgName ) ;
2007-03-15 15:01:29 +00:00
ModulWindow * ShowActiveModuleWindow ( StarBASIC * pBasic ) ;
virtual void SFX_NOTIFY ( SfxBroadcaster & rBC , const TypeId & rBCType ,
const SfxHint & rHint , const TypeId & rHintType ) ;
2011-01-14 11:16:25 +01:00
virtual void Activate ( sal_Bool bMDI ) ;
virtual void Deactivate ( sal_Bool bMDI ) ;
2007-03-15 15:01:29 +00:00
virtual void Move ( ) ;
2010-10-05 07:57:51 -05:00
virtual void ShowCursor ( bool bOn = true ) ;
2007-03-15 15:01:29 +00:00
2007-10-09 14:25:06 +00:00
// DocumentEventListener
virtual void onDocumentCreated ( const ScriptDocument & _rDocument ) ;
virtual void onDocumentOpened ( const ScriptDocument & _rDocument ) ;
virtual void onDocumentSave ( const ScriptDocument & _rDocument ) ;
virtual void onDocumentSaveDone ( const ScriptDocument & _rDocument ) ;
virtual void onDocumentSaveAs ( const ScriptDocument & _rDocument ) ;
virtual void onDocumentSaveAsDone ( const ScriptDocument & _rDocument ) ;
virtual void onDocumentClosed ( const ScriptDocument & _rDocument ) ;
virtual void onDocumentTitleChanged ( const ScriptDocument & _rDocument ) ;
virtual void onDocumentModeChanged ( const ScriptDocument & _rDocument ) ;
2007-03-15 15:01:29 +00:00
public :
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
TYPEINFO ( ) ;
SFX_DECL_INTERFACE ( SVX_INTERFACE_BASIDE_VIEWSH )
SFX_DECL_VIEWFACTORY ( Shell ) ;
2007-03-15 15:01:29 +00:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
Shell ( SfxViewFrame * pFrame , SfxViewShell * pOldSh ) ;
~ Shell ( ) ;
2007-03-15 15:01:29 +00:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
BaseWindow * GetCurWindow ( ) const { return pCurWin ; }
ScriptDocument const & GetCurDocument ( ) const { return m_aCurDocument ; }
rtl : : OUString const & GetCurLibName ( ) const { return m_aCurLibName ; }
2012-01-20 20:23:06 -05:00
boost : : shared_ptr < LocalizationMgr > GetCurLocalizationMgr ( ) const { return m_pCurLocalizationMgr ; }
2007-03-15 15:01:29 +00:00
ScrollBar & GetHScrollBar ( ) { return aHScrollBar ; }
ScrollBar & GetVScrollBar ( ) { return aVScrollBar ; }
ScrollBarBox & GetScrollBarBox ( ) { return aScrollBarBox ; }
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
TabBar & GetTabBar ( ) { return * pTabBar ; }
WindowTable & GetWindowTable ( ) { return aWindowTable ; }
sal_uInt16 GetWindowId ( BaseWindow const * pWin ) const ;
2007-03-15 15:01:29 +00:00
2008-03-06 18:14:54 +00:00
SdrView * GetCurDlgView ( ) const ;
2007-03-15 15:01:29 +00:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
svl : : IUndoManager * GetUndoManager ( ) ;
2007-03-15 15:01:29 +00:00
2009-05-19 11:32:44 +00:00
virtual com : : sun : : star : : uno : : Reference < com : : sun : : star : : view : : XRenderable > GetRenderable ( ) ;
2011-01-14 11:16:25 +01:00
// virtual sal_uInt16 Print( SfxProgress &rProgress, sal_Bool bIsAPI, PrintDialog *pPrintDialog = 0 );
virtual SfxPrinter * GetPrinter ( sal_Bool bCreate ) ;
2012-08-17 07:29:20 +02:00
virtual sal_uInt16 SetPrinter ( SfxPrinter * pNewPrinter , sal_uInt16 nDiffFlags = SFX_PRINTER_ALL , bool bIsAPI = false ) ;
2011-01-14 11:16:25 +01:00
virtual String GetSelectionText ( sal_Bool bCompleteWords ) ;
2012-08-17 07:29:20 +02:00
virtual sal_Bool HasSelection ( sal_Bool bText ) const ;
2007-03-15 15:01:29 +00:00
void GetState ( SfxItemSet & ) ;
void ExecuteGlobal ( SfxRequest & rReq ) ;
void ExecuteCurrent ( SfxRequest & rReq ) ;
void ExecuteBasic ( SfxRequest & rReq ) ;
void ExecuteDialog ( SfxRequest & rReq ) ;
2007-04-30 06:35:38 +00:00
virtual sal_Bool HasUIFeature ( sal_uInt32 nFeature ) ;
2007-03-15 15:01:29 +00:00
long CallBasicErrorHdl ( StarBASIC * pBasic ) ;
long CallBasicBreakHdl ( StarBASIC * pBasic ) ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
BaseWindow * FindWindow ( const ScriptDocument & rDocument , const : : rtl : : OUString & rLibName = : : rtl : : OUString ( ) , const : : rtl : : OUString & rName = : : rtl : : OUString ( ) , ItemType nType = TYPE_UNKNOWN , bool bFindSuspended = false ) ;
2012-08-17 07:29:20 +02:00
DialogWindow * FindDlgWin ( const ScriptDocument & rDocument , const : : rtl : : OUString & rLibName , const : : rtl : : OUString & rName , bool bCreateIfNotExist = false , bool bFindSuspended = false ) ;
ModulWindow * FindBasWin ( const ScriptDocument & rDocument , const : : rtl : : OUString & rLibName , const : : rtl : : OUString & rModName , bool bCreateIfNotExist = false , bool bFindSuspended = false ) ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
BaseWindow * FindApplicationWindow ( ) ;
2012-08-02 10:21:00 +09:00
bool NextPage ( bool bPrev = false ) ;
2007-03-15 15:01:29 +00:00
2012-08-07 08:36:40 +02:00
bool IsAppBasicModified ( ) const { return m_bAppBasicModified ; }
void SetAppBasicModified ( bool bModified = true ) { m_bAppBasicModified = bModified ; }
2007-08-03 09:00:00 +00:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
// For Dialog Drag&Drop in Dialog Organizer:
// (defined in moduldlg.cxx)
2007-08-03 09:00:00 +00:00
static void CopyDialogResources (
: : com : : sun : : star : : uno : : Reference < : : com : : sun : : star : : io : : XInputStreamProvider > & io_xISP ,
2011-12-09 01:58:49 -05:00
const ScriptDocument & rSourceDoc , const : : rtl : : OUString & rSourceLibName , const ScriptDocument & rDestDoc ,
const : : rtl : : OUString & rDestLibName , const : : rtl : : OUString & rDlgName ) ;
2008-03-06 18:14:54 +00:00
virtual : : com : : sun : : star : : uno : : Reference < : : com : : sun : : star : : frame : : XModel >
GetCurrentDocument ( ) const ;
2012-08-17 07:29:20 +02:00
void UpdateObjectCatalog ( ) { aObjectCatalog . UpdateEntries ( ) ; }
2012-08-06 14:28:28 +02:00
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
void RemoveWindow ( BaseWindow * pWindow , bool bDestroy , bool bAllowChangeCurWindow = true ) ;
2007-03-15 15:01:29 +00:00
} ;
Basic IDE: namespace basctl
Now all names in basctl are in namespace 'basctl'.
There were lots of names that included the word 'Basic' or 'BasicIDE' in
it, e.g. BasicIDEData, BasicDocumentEntry, BasicTreeListBox,
BasicIDEModule, IDEBaseWindow etc. This information is now stored in the
namespace name, so the names could be shortened: basctl::DocumentEntry,
basctl::TreeListBox, basctl::Module, basctl::BaseWindow etc.
Some other minor changes:
* LibInfos, LibInfoItem, LibInfoKey ->
LibInfos, LibInfos::Item, LibInfos::Key
* The header guards are now uniformly BASCTL_FILENAME_HXX, instead of
e.g. _FILENAME_HXX, which is undefined behaviour because of the '_'.
* namespace BasicIDE, BasicIDEGlobals, basicide -> namespace basctl
* BASICIDE_TYPE_MODULE, ... -> basctl::TYPE_MODULE, ...
Change-Id: I2a9b493562d0d8a2510d569798fbe9e1161b7c9b
Reviewed-on: https://gerrit.libreoffice.org/501
Reviewed-by: Andras Timar <atimar@suse.com>
Tested-by: Andras Timar <atimar@suse.com>
2012-08-25 12:43:27 +02:00
} // namespace basctl
// This typedef helps baside.sdi,
// because I don't know how to use nested names in it.
typedef basctl : : Shell basctl_Shell ;
2012-08-17 07:29:20 +02:00
# endif // BASCTL_BASIDESH_HXX
2010-10-27 12:45:03 +01:00
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
