2009-07-08 11:52:32 +0200 fs r273825 : #i101701# always Draw (instead of PaintToDevice) when exporting to PDF, there's no reason to care for IsExportFormFields, this is done in higher layers
2009-06-29 20:53:25 +0200 fs r273484 : #i103138# Rectangle conversion
2009-06-29 20:51:50 +0200 fs r273483 : #i103138# yet more refactoring, now also setting the proper zoom level at the proper point in time
2009-06-29 13:40:26 +0200 fs r273470 : added svn:ignore to ignore output paths
2009-06-29 10:08:54 +0200 fs r273455 : #i103138#
refactored the code for positioning/zooming the control
Basically, we now allow adjustControlGeometry_throw (formerly known as positionControl_throw and setControlZoom) to
take an additional ViewTransformation parameter, describing the transformation to obtain the actual
control position/size. Consequently, positionControl itself also allows for a ViewTransformation parameter.
This has become necessary since during painting, the device which we created our control for might not necessarily
have a proper MapMode set. In this case, if we would use this map mode for calculating the control's position/size,
this would lead to wrong results.
Note that this problem was introduced by the fix for #i101398#: During the fix, we postponed the control creation
to a later time (when it is really needed). At this later time, the MapMode at the device is broken, at the earlier
time where we formerly crearted the control (createPrimitive2DSequence), it is not yet broken.
Whether or not the MapMode is defined as "broken" might depend on one's point of view, however ...
I consider it broken, since:
- we need the map mode to obtain the proper zoom level, which is to be forwarded to the control
- there are scenarios where the MapMode is *not* set to MAP_PIXEL (in those scenarios, everything works
fine), and there are scenarios where it *is* set to MAP_PIXEL (in those the bug 103138 appears).
It somehow feels wrong that one cannot rely on the device's map mode this way, but on the other hand
one has no possibility to obtain the current zoom by other means.
Note that one issue (still to be submitted) is left: In the page pane of a Draw/Impress document, controls
have a wrong text size. This is because in this pane, the above-mentioned "broken" map mode is used,
which means the controls have a zoom of "1:1" set, which is wrong here.
2009-06-25 13:41:35 +0200 msc r273380 : #100000# the tabs changed die to new properties
2009-06-24 12:42:40 +0200 msc r273330 : #102082# remove issue warning
2009-06-22 10:43:14 +0200 fs r273201 : createPrimitive2DSequence: care for being disposed
2009-06-18 12:35:13 +0200 oj r273109 : #i102305# make nooptfiles for gcc
2009-06-17 12:14:37 +0200 oj r273056 : #i102305# fix for linux
2009-06-17 07:20:22 +0200 oj r273046 : #i102305# move ValueTransfer into the for loop to avoid a crash under Linux
2009-06-17 07:17:28 +0200 oj r273045 : #i102305# use varchar
2009-06-15 14:11:27 +0200 fs r272983 : added since tag
2009-06-15 12:11:39 +0200 oj r272973 : #i102305# SAL_DLLPUBLIC_EXPORT inserted
2009-06-15 11:08:53 +0200 fs r272969 : #i10000#
2009-06-15 09:25:13 +0200 fs r272963 : merging fix for P1 issue #i102701#
2009-06-11 11:31:24 +0200 fs r272858 : #i10000# copied the fix which before the rebase was done in ../dialog/macropg.src
2009-06-11 09:38:14 +0200 fs r272846 : CWS-TOOLING: rebase CWS dba32c to trunk@272827 (milestone: DEV300:m50)
2009-06-02 09:53:10 +0200 fs r272483 : #i10000#
2009-05-29 15:55:03 +0200 fs r272465 : #i100818#
2009-05-29 12:58:43 +0200 fs r272452 : don't apply comphelper::getString on possibly VOID any
2009-05-29 10:38:35 +0200 oj r272437 : #i101519# handle where condition
2009-05-29 09:53:39 +0200 fs r272434 : #i100818# call into releaseStubs /without/ locked GlobalMutex
2009-05-28 07:53:44 +0200 oj r272375 : #i101369# parse tree changed
2009-05-27 14:53:36 +0200 fs r272347 : #i10000#
2009-05-27 09:29:15 +0200 oj r272327 : #i101626# check for double before hard cast
2009-05-27 09:13:58 +0200 oj r272326 : #i101626# handle void correctly
2009-05-27 08:04:39 +0200 oj r272321 : #i102256# wrong method signature used
2009-05-27 07:55:52 +0200 oj r272320 : #i101519# look up parameter typ if used in function
2009-05-27 06:49:07 +0200 oj r272319 : #i101519# set parameter from rowset as well
2009-05-26 13:30:56 +0200 oj r272297 : #i101987# impl XBatchExecution
2009-05-26 12:44:34 +0200 oj r272293 : #i101700# check if group is not set
2009-05-26 12:16:53 +0200 oj r272290 : #i101369# resolved some reduce7reduce problems with boolean_term and search_condition
2009-05-26 12:12:42 +0200 oj r272289 : #i101369# fix for or on one line criteria
2009-05-25 16:02:25 +0200 fs r272257 : #i999704# +PROPERTY_MOUSE_WHEEL_BEHAVIOR
2009-05-25 16:01:55 +0200 fs r272256 : merging the changes from CWS dba32b herein
2009-05-25 15:49:57 +0200 fs r272254 : #i999704#
2009-05-25 15:32:57 +0200 fs r272252 : #i99704# grid columns also to respect the MouseWheelBehavior property
2009-05-25 15:23:43 +0200 fs r272251 : don't pass empty Anys to ::comphelper::getString
2009-05-25 14:48:43 +0200 fs r272248 : merged changes from CWS dba32b herein
2009-05-25 14:44:40 +0200 fs r272247 : #i99704# support new MouseWheelBehavior property
2009-05-25 14:43:18 +0200 fs r272246 : #i99704# WheelWithoutFocus (peer property) superseded by MouseWheelBehavior (model property)
2009-05-25 14:41:03 +0200 fs r272245 : #i99704# no need to set the mouse wheel behavior at the peer, this is now a model property, having the right default
2009-05-25 14:39:31 +0200 fs r272243 : removed dead import
2009-05-25 14:35:36 +0200 fs r272242 : the new EnableVisible doesn't make sense for grid columns
2009-05-25 14:34:33 +0200 fs r272241 : #i99704# +MouseWheelBehavior - allow to enable/disable the mouse wheel for the control, or make it focus-dependent
2009-05-25 14:26:11 +0200 fs r272240 : #i99704# change MouseSettings wheel flag (NoWheelActionWithoutFocus) to a three-state option, allowing to completely ignore the mouse wheel
2009-05-23 21:35:59 +0200 fs r272213 : localize 'sub component opened/closed' event
2009-05-22 21:42:47 +0200 fs r272211 : #i102003#
2009-05-22 21:42:20 +0200 fs r272210 : grammar
2009-05-22 21:36:10 +0200 fs r272209 : #i102140# load only once, not twice, and show error messages during loading (and during any form action, that is) asynchronously
2009-05-22 21:35:11 +0200 fs r272208 : #i102140# +clear
2009-05-22 14:50:30 +0200 fs r272194 : #i102139# for newly created DB docs, set the MacroExecutionMode to USE_CONFIG
2009-05-22 12:03:42 +0200 fs r272180 : #i88878#
provided by noel.power@novell.com
implement a visibility property (EnableVisible) for toolkit controls, and usage in forms and UNO dialogs
2009-05-15 15:37:31 +0200 fs r271942 : #i100671# corrected some @since tags, so autodoc has better chances of correctly reading them
2009-05-15 15:33:11 +0200 fs r271940 : don't call comphelper::getFOO for VOID values
2009-05-15 15:08:31 +0200 fs r271937 : includes
2009-05-15 13:39:22 +0200 fs r271934 : #i101398# createPrimitive2DSequence: when we already have a control, use the old code. In particular, call positionControlForPaint
2009-05-15 12:33:48 +0200 fs r271933 : make the geometry a part of the ControlPrimitive2D's identity
2009-05-15 10:15:44 +0200 fs r271928 : #i10000#
2009-05-14 20:55:38 +0200 fs r271921 : #i101398# don't reuse the name PRIMITIVE_ID_CONTROLPRIMITIVE2D, make the name of our own ControlPrimitive2D unique
2009-05-14 20:55:31 +0200 fs r271920 : #i101398# don't reuse the name PRIMITIVE_ID_CONTROLPRIMITIVE2D, make the name of our own ControlPrimitive2D unique
2009-05-14 20:23:23 +0200 fs r271919 : #i101622#
2009-05-14 16:04:38 +0200 fs r271898 : don't use comphelper::getInt32 on voids
2009-05-14 16:04:12 +0200 fs r271897 : merge fix for issue whose number just slipped my memory ... (originally fixed in CWS dba32b)
2009-05-14 15:36:55 +0200 fs r271895 : merging changes from DEV300:m48
2009-05-07 14:43:19 +0200 fs r271670 : #i101477#
2009-05-07 14:37:30 +0200 fs r271668 : #i101477#
2009-05-07 09:27:30 +0200 oj r271628 : #i101343# remove pch
2009-05-06 09:36:02 +0200 fs r271568 : getFoo: diagnostics
2009-05-04 09:23:06 +0200 oj r271438 : CWS-TOOLING: rebase CWS dba32c to trunk@271427 (milestone: DEV300:m47)
2009-04-29 23:18:13 +0200 fs r271394 : #i101398# use a dedicated 2DPrimitive for UNO Controls, which is able to provide the B2DRange *without* actually creating the control
2009-04-29 13:52:25 +0200 fs r271366 : #i101308#
2009-04-02 18:13:38 +0200 pl r270430 : CWS-TOOLING: rebase CWS macshortcuts01 to trunk@270033 (milestone: DEV300:m45)
2009-03-04 13:02:01 +0100 pl r268816 : make compile with oldish gtk headers
2009-03-04 11:23:41 +0100 rvojta r268799 : Remove #ifndef MACOSX as Mac OS X X11 port is obsolote, no need to check for non Mac OS X
2009-03-03 16:33:34 +0100 rvojta r268764 : Meta/Super to MOD3 on all Unix platforms except Mac OS X
2009-03-03 16:08:46 +0100 rvojta r268744 : Map GDK_Meta_L/R and GDK_Super_L/R keys to KEY_MOD3 on Unix systems except Mac OS X
2009-03-03 16:04:23 +0100 rvojta r268742 : IsMod3(), IsLeftMod3(), IsRightMod3() added
2009-03-03 16:03:48 +0100 rvojta r268741 : MODKEY_LMOD3, MODKEY_RMOD3, MODKEY_MOD3 support
2009-02-28 00:09:26 +0100 rvojta r268620 : New KeyCode constructors support, by default MOD3 is not used here (probably temporary solution)
2009-02-25 22:53:02 +0100 rvojta r268469 : MOD3 support (META_DOWN_MASK)
2009-02-25 13:22:13 +0100 rvojta r268435 : Cmd-M to minimize window, Cmd-Option-M to minimize all windows
2009-02-25 11:09:20 +0100 rvojta r268417 : Add back F11 for non Mac OS X platforms (removed by accident in r268405)
2009-02-24 18:32:31 +0100 rvojta r268405 : F11 replaced by Cmd-T on Mac OS X
2009-02-23 15:21:53 +0100 sb r268358 : #i99296# support values with both xml:lang and install:module (which are moved into the spool tree, not the res tree)
2009-02-16 22:45:34 +0100 rvojta r267839 : Multiplatform shortcuts support
2009-02-16 22:41:03 +0100 rvojta r267838 : Use install:module instead of separate xcu file
2009-02-16 18:35:36 +0100 rvojta r267833 : Removed accelerators target
2009-02-16 09:27:42 +0100 rvojta r267776 : MOD3 added
2009-02-16 09:18:32 +0100 rvojta r267775 : MOD3 support
2009-02-16 09:17:11 +0100 rvojta r267774 : MOD3 support
2009-02-15 22:11:37 +0100 rvojta r267773 : Check for MOD3 too
2009-02-15 22:11:15 +0100 rvojta r267772 : Check for MOD3 too
2009-02-15 22:10:37 +0100 rvojta r267771 : Check for MOD3 too
2009-02-15 22:10:15 +0100 rvojta r267770 : Check for MOD3 during mouse event too
2009-02-15 22:09:54 +0100 rvojta r267769 : IsMod3() added
2009-02-15 19:34:59 +0100 rvojta r267768 : MOD3 added (Ctrl on Mac OS X)
2009-02-15 19:33:43 +0100 rvojta r267767 : Cmd-M -> Ctrl-M for default format
2009-02-15 19:32:19 +0100 rvojta r267766 : MOD3 added (Ctrl on Mac OS X)
2009-02-15 19:31:30 +0100 rvojta r267765 : MOD3 added (Ctrl on Mac OS X)
2009-02-15 19:31:04 +0100 rvojta r267764 : MOD3 added (Ctrl on Mac OS X)
2009-02-15 19:30:33 +0100 rvojta r267763 : MOD3 added (Ctrl on Mac OS X)
2009-02-15 19:30:09 +0100 rvojta r267762 : MOD3 added (Ctrl on Mac OS X)
2009-02-13 22:11:22 +0100 rvojta r267751 : Cmd-Shift-Z for .uno:Redo
2009-02-13 22:04:19 +0100 rvojta r267748 : F11 -> Cmd-T for .uno:DesignerDialog
2009-02-13 21:09:11 +0100 rvojta r267743 : F11 -> Cmd-T (all occurences)
2009-02-13 19:47:21 +0100 rvojta r267741 : accelerators target added for Mac OS X shortcuts
2009-02-13 19:46:58 +0100 rvojta r267740 : Spreadsheet - replace F11 with Cmd-T
2009-02-13 19:24:19 +0100 rvojta r267739 : Remove Accelerators-Mac.xcs
2009-02-13 18:50:01 +0100 rvojta r267738 : Accelerators-Mac.xcs test
2009-02-13 18:48:10 +0100 rvojta r267737 : Accelerators-Mac.xcu added
2009-02-13 18:46:48 +0100 rvojta r267736 : F11 -> Cmd-T for stylist in Spreadsheet
2008/01/24 07:50:48 pb 1.81.12.3: RESYNC: (1.81-1.81.18.3); FILE MERGED
2007/12/14 15:49:49 cd 1.81.12.2: #i83406# Use correct way to enable transparency and update with SetPaintTransparent()
2007/12/07 15:43:07 cd 1.81.12.1: #i83406# Text changes for transparent controls must invalidate parent to have a clear background
2007/12/06 14:40:16 cd 1.81.2.2: #i84193# Added missing group box and fixed line control to the set of safe controls
2007/12/04 13:09:17 cd 1.81.2.1: #i84193# Enable transparency only for safe controls. Revert to old background color code for other controls
2007/11/07 09:54:53 cd 1.79.20.2: #i83238# Tabpages and dialogs should not support transparency
2007/11/06 13:11:25 cd 1.79.20.1: #i83237# Make changes to support transparent background for non-compound controls
2007/06/25 07:45:45 dv 1.73.10.2: RESYNC: (1.73-1.74); FILE MERGED
2007/06/08 06:54:55 dv 1.73.10.1: #i70588# Added support for autovscroll and painttransparent to edit
2007/03/07 11:23:44 fs 1.72.16.1: draw: Always use PaintToDevice, nowadays the old hacks are not necessary anymore (and hurt in case of #i74694# and #i74895#)
2004/12/29 11:10:57 fs 1.49.20.2: #i34551# vertical alignment
2004/12/03 12:55:39 fs 1.49.20.1: #i37023# #i36007# draw: Use Window::Draw when print/previewing, else PaintToDevice / draw: paint visible controls by updating them, if they should be painted onto their parent
2004/06/04 15:40:43 ssa 1.44.2.8: #i25121# support for subtoolbars
2004/05/31 01:11:56 cd 1.44.2.7: RESYNC: (1.44-1.45); FILE MERGED
2004/05/11 17:25:37 ssa 1.44.2.6: #i25117# support for toolbar locking
2004/04/21 14:16:57 cd 1.44.2.5: #i24913# extend dockable interface
2004/04/20 16:55:30 ssa 1.44.2.4: #i24913# provide close handler and set/getpossize for dockable windows
2004/04/02 14:06:07 ssa 1.44.2.3: #i24913# send dockingdata with startdocking
2004/03/25 15:58:38 ssa 1.44.2.2: #i24913# extend dockable interface
2004/03/24 17:59:45 ssa 1.44.2.1: #i24913# support for dockable windows via toolkit
