/************************************************************************* * * $RCSfile: fuprlout.cxx,v $ * * $Revision: 1.4 $ * * last change: $Author: dl $ $Date: 2001-11-14 13:31:17 $ * * The Contents of this file are made available subject to the terms of * either of the following licenses * * - GNU Lesser General Public License Version 2.1 * - Sun Industry Standards Source License Version 1.1 * * Sun Microsystems Inc., October, 2000 * * GNU Lesser General Public License Version 2.1 * ============================================= * Copyright 2000 by Sun Microsystems, Inc. * 901 San Antonio Road, Palo Alto, CA 94303, USA * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software Foundation. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * * Sun Industry Standards Source License Version 1.1 * ================================================= * The contents of this file are subject to the Sun Industry Standards * Source License Version 1.1 (the "License"); You may not use this file * except in compliance with the License. You may obtain a copy of the * License at http://www.openoffice.org/license.html. * * Software provided under this License is provided on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. * See the License for the specific provisions governing your rights and * obligations concerning the Software. * * The Initial Developer of the Original Code is: Sun Microsystems, Inc. * * Copyright: 2000 by Sun Microsystems, Inc. * * All Rights Reserved. * * Contributor(s): _______________________________________ * * ************************************************************************/ #pragma hdrstop #ifndef _SV_WRKWIN_HXX #include #endif #ifndef _SFXDISPATCH_HXX //autogen #include #endif #ifndef _SFXSMPLHINT_HXX //autogen #include #endif #ifndef _SFXITEMPOOL_HXX //autogen #include #endif #ifndef _SVSTOR_HXX //autogen #include #endif #ifndef _SV_MSGBOX_HXX //autogen #include #endif #ifndef _SVDUNDO_HXX //autogen #include #endif #include "fuprlout.hxx" #include "drawdoc.hxx" #include "sdpage.hxx" #include "pres.hxx" #include "drviewsh.hxx" #include "frmview.hxx" #include "stlpool.hxx" #include "sdview.hxx" #include "glob.hrc" #include "glob.hxx" #include "strings.hrc" #include "strmname.h" #include "app.hrc" #include "docshell.hxx" #include "unprlout.hxx" #include "unchss.hxx" #include "unmovss.hxx" #include "sdattr.hxx" #include "sdresid.hxx" #include "sdpreslt.hxx" #include "drawview.hxx" #include "eetext.hxx" #include #ifndef SO2_DECL_SVSTORAGE_DEFINED #define SO2_DECL_SVSTORAGE_DEFINED SO2_DECL_REF(SvStorage) #endif TYPEINIT1( FuPresentationLayout, FuPoor ); #define POOL_BUFFER_SIZE (USHORT)32768 #define DOCUMENT_BUFFER_SIZE (USHORT)32768 #define DOCUMENT_TOKEN (sal_Unicode('#')) /************************************************************************* |* |* Konstruktor |* \************************************************************************/ FuPresentationLayout::FuPresentationLayout(SdViewShell* pViewSh, SdWindow* pWin, SdView* pView, SdDrawDocument* pDoc, SfxRequest& rReq) : FuPoor(pViewSh, pWin, pView, pDoc, rReq) { // damit nicht Objekte, die gerade editiert werden oder selektiert // sind , verschwinden pView->EndTextEdit(); USHORT nPgViewCount = pView->GetPageViewCount(); for (USHORT nPgView = 0; nPgView < nPgViewCount; nPgView++) { pView->UnmarkAll(); } BOOL bError = FALSE; // die aktive Seite ermitteln USHORT nSelectedPage = SDRPAGE_NOTFOUND; for (USHORT nPage = 0; nPage < pDoc->GetSdPageCount(PK_STANDARD); nPage++) { if (pDoc->GetSdPage(nPage, PK_STANDARD)->IsSelected()) { nSelectedPage = nPage; break; } } DBG_ASSERT(nSelectedPage != SDRPAGE_NOTFOUND, "keine selektierte Seite"); SdPage* pSelectedPage = pDoc->GetSdPage(nSelectedPage, PK_STANDARD); String aOldPageLayoutName(pSelectedPage->GetLayoutName()); String aOldLayoutName(aOldPageLayoutName); aOldLayoutName.Erase(aOldLayoutName.SearchAscii(SD_LT_SEPARATOR)); // wenn wir auf einer Masterpage sind, gelten die Aenderungen fuer alle // Seiten und Notizseiten, die das betreffende Layout benutzen BOOL bOnMaster = FALSE; if (pViewSh->ISA(SdDrawViewShell)) { EditMode eEditMode = ((SdDrawViewShell*)pViewSh)->GetEditMode(); if (eEditMode == EM_MASTERPAGE) bOnMaster = TRUE; } BOOL bMasterPage = bOnMaster; BOOL bCheckMasters = FALSE; // Dialog aufrufen BOOL bLoad = FALSE; // tauchen neue Masterpages auf? String aFile; SfxItemSet aSet(pDoc->GetPool(), ATTR_PRESLAYOUT_START, ATTR_PRESLAYOUT_END); aSet.Put( SfxBoolItem( ATTR_PRESLAYOUT_LOAD, bLoad)); aSet.Put( SfxBoolItem( ATTR_PRESLAYOUT_MASTER_PAGE, bMasterPage ) ); aSet.Put( SfxBoolItem( ATTR_PRESLAYOUT_CHECK_MASTERS, bCheckMasters ) ); aSet.Put( SfxStringItem( ATTR_PRESLAYOUT_NAME, aOldLayoutName)); SdPresLayoutDlg* pDlg = new SdPresLayoutDlg( pDocSh, pViewSh, NULL, aSet); USHORT nResult = pDlg->Execute(); switch (nResult) { case RET_OK: { pDlg->GetAttr(aSet); if (aSet.GetItemState(ATTR_PRESLAYOUT_LOAD) == SFX_ITEM_SET) bLoad = ((SfxBoolItem&)aSet.Get(ATTR_PRESLAYOUT_LOAD)).GetValue(); if( aSet.GetItemState( ATTR_PRESLAYOUT_MASTER_PAGE ) == SFX_ITEM_SET ) bMasterPage = ( (SfxBoolItem&) aSet.Get( ATTR_PRESLAYOUT_MASTER_PAGE ) ).GetValue(); if( aSet.GetItemState( ATTR_PRESLAYOUT_CHECK_MASTERS ) == SFX_ITEM_SET ) bCheckMasters = ( (SfxBoolItem&) aSet.Get( ATTR_PRESLAYOUT_CHECK_MASTERS ) ).GetValue(); if (aSet.GetItemState(ATTR_PRESLAYOUT_NAME) == SFX_ITEM_SET) aFile = ((SfxStringItem&)aSet.Get(ATTR_PRESLAYOUT_NAME)).GetValue(); } break; default: bError = TRUE; } delete pDlg; if (!bError) { pDocSh->SetWaitCursor( TRUE ); // Hier werden nur Masterpages ausgewechselt, d.h. die aktuelle Seite // bleibt aktuell. Damit beim Ein- und Ausfuegen der Masterpages nicht // dauernd via PageOrderChangedHint die Methode ResetActualPage gerufen // wird, wird jetzt blockiert. // That isn't quitely right. If the masterpageview is active and you are // removing a masterpage, it's possible that you are removing the // current masterpage. So you have to call ResetActualPage ! if( pViewShell->ISA(SdDrawViewShell) && !bCheckMasters ) ((SdDrawView*)pView)->BlockPageOrderChangedHint(TRUE); if (bLoad) { String aFileName = aFile.GetToken( 0, DOCUMENT_TOKEN ); SdDrawDocument* pTempDoc = pDoc->OpenBookmarkDoc( aFileName ); // #69581: If I chosed the standard-template I got no filename and so I get no // SdDrawDocument-Pointer. But the method SetMasterPage is able to handle // a NULL-pointer as a Standard-template ( look at SdDrawDocument::SetMasterPage ) String aLayoutName; if( pTempDoc ) aLayoutName = aFile.GetToken( 1, DOCUMENT_TOKEN ); pDoc->SetMasterPage(nSelectedPage, aLayoutName, pTempDoc, bMasterPage, bCheckMasters); pDoc->CloseBookmarkDoc(); } else { // MasterPage mit dem LayoutNamen aFile aus aktuellem Doc verwenden pDoc->SetMasterPage(nSelectedPage, aFile, pDoc, bMasterPage, bCheckMasters); } // Blockade wieder aufheben if (pViewShell->ISA(SdDrawViewShell) && !bCheckMasters ) ((SdDrawView*)pView)->BlockPageOrderChangedHint(FALSE); /************************************************************************* |* Falls dargestellte Masterpage sichtbar war, neu darstellen \************************************************************************/ if (!bError && nSelectedPage != SDRPAGE_NOTFOUND) { if (bOnMaster) { if (pViewShell->ISA(SdDrawViewShell)) { SdView* pView = ((SdDrawViewShell*)pViewShell)->GetView(); USHORT nPgNum = pSelectedPage->GetMasterPage(0)->GetPageNum(); if (((SdDrawViewShell*)pViewShell)->GetPageKind() == PK_NOTES) nPgNum++; pView->HideAllPages(); pView->ShowMasterPagePgNum(nPgNum, Point()); } // damit TabBar aktualisiert wird pViewShell->GetViewFrame()->GetDispatcher()->Execute(SID_MASTERPAGE, SFX_CALLMODE_ASYNCHRON | SFX_CALLMODE_RECORD); } else { pSelectedPage->SetAutoLayout(pSelectedPage->GetAutoLayout()); } } // fake a mode change to repaint the page tab bar if( pViewShell && pViewShell->ISA( SdDrawViewShell ) ) { SdDrawViewShell* pDrawViewSh = (SdDrawViewShell*)pViewShell; EditMode eMode = pDrawViewSh->GetEditMode(); BOOL bLayer = pDrawViewSh->GetLayerMode(); pDrawViewSh->ChangeEditMode( eMode, !bLayer ); pDrawViewSh->ChangeEditMode( eMode, bLayer ); } pDocSh->SetWaitCursor( FALSE ); } } /************************************************************************* |* |* Destruktor |* \************************************************************************/ FuPresentationLayout::~FuPresentationLayout() { } /************************************************************************* |* |* Layoutvorlage von einem StyleSheetPool in einen anderen uebertragen |* \************************************************************************/ void FuPresentationLayout::TransferLayoutTemplate(String aFromName, String aToName, SfxStyleSheetBasePool* pFrom, SfxStyleSheetBasePool* pTo) { SfxStyleSheetBase* pHis = pFrom->Find(aFromName,SD_LT_FAMILY); SfxStyleSheetBase* pMy = pTo->Find(aToName, SD_LT_FAMILY); DBG_ASSERT(pHis, "neue Layoutvorlage nicht gefunden"); // gibt's noch nicht: neu anlegen if (!pMy) { pMy = &(pTo->Make(aToName, SD_LT_FAMILY)); } // Inhalte neu setzen if (pHis) pMy->GetItemSet().Set(pHis->GetItemSet()); }