Files
libreoffice/sd/source/ui/func/fuprlout.cxx
Caolán McNamara f7ed8b99b6 allow slide design to affect multiple standard pages
modify this minimally and select all standard pages
selected in the slidesorted, unselect them afterwards
and loop over the selected ones.

This looks like it could do with a rework to disentangle
the master/standard pages stuff, but leave it as is in
this commit

Change-Id: Ifd01fe21c91e5e6b07b2d8bba0d85facadc25998
2015-06-23 16:57:23 +01:00

296 lines
11 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include "fuprlout.hxx"
#include <vcl/wrkwin.hxx>
#include <sfx2/dispatch.hxx>
#include <svl/smplhint.hxx>
#include <svl/itempool.hxx>
#include <sot/storage.hxx>
#include <vcl/msgbox.hxx>
#include <svx/svdundo.hxx>
#include <sfx2/viewfrm.hxx>
#include <sfx2/request.hxx>
#include "drawdoc.hxx"
#include "sdpage.hxx"
#include "pres.hxx"
#include "DrawViewShell.hxx"
#include "FrameView.hxx"
#include "stlpool.hxx"
#include "View.hxx"
#include "glob.hrc"
#include "glob.hxx"
#include "strings.hrc"
#include "strmname.h"
#include "app.hrc"
#include "DrawDocShell.hxx"
#include "SlideSorterViewShell.hxx"
#include "unprlout.hxx"
#include "unchss.hxx"
#include "unmovss.hxx"
#include "sdattr.hxx"
#include "sdresid.hxx"
#include "drawview.hxx"
#include <editeng/outliner.hxx>
#include <editeng/editdata.hxx>
#include "sdabstdlg.hxx"
#include <boost/scoped_ptr.hpp>
namespace sd
{
TYPEINIT1( FuPresentationLayout, FuPoor );
#define DOCUMENT_TOKEN '#'
FuPresentationLayout::FuPresentationLayout (
ViewShell* pViewSh,
::sd::Window* pWin,
::sd::View* pView,
SdDrawDocument* pDoc,
SfxRequest& rReq)
: FuPoor(pViewSh, pWin, pView, pDoc, rReq)
{
}
rtl::Reference<FuPoor> FuPresentationLayout::Create( ViewShell* pViewSh, ::sd::Window* pWin, ::sd::View* pView, SdDrawDocument* pDoc, SfxRequest& rReq )
{
rtl::Reference<FuPoor> xFunc( new FuPresentationLayout( pViewSh, pWin, pView, pDoc, rReq ) );
xFunc->DoExecute(rReq);
return xFunc;
}
void FuPresentationLayout::DoExecute( SfxRequest& rReq )
{
// prevent selected objects or objects which are under editing from disappearing
mpView->SdrEndTextEdit();
if(mpView->GetSdrPageView())
{
mpView->UnmarkAll();
}
bool bError = false;
/* if we are on a master page, the changes apply for all pages and notes-
pages who are using the relevant layout */
bool bOnMaster = false;
if( mpViewShell && mpViewShell->ISA(DrawViewShell))
{
EditMode eEditMode =
static_cast<DrawViewShell*>(mpViewShell)->GetEditMode();
if (eEditMode == EM_MASTERPAGE)
bOnMaster = true;
}
std::vector<SdPage*> aUnselect;
if (!bOnMaster)
{
//We later rely on IsSelected, so transfer the selection here
//into the document
slidesorter::SlideSorterViewShell* pSlideSorterViewShell
= slidesorter::SlideSorterViewShell::GetSlideSorter(mpViewShell->GetViewShellBase());
if (pSlideSorterViewShell)
{
boost::shared_ptr<slidesorter::SlideSorterViewShell::PageSelection> xSelection(
pSlideSorterViewShell->GetPageSelection());
if (xSelection)
{
for (auto it = xSelection->begin(); it != xSelection->end(); ++it)
{
SdPage *pPage = *it;
if (pPage->IsSelected() || pPage->GetPageKind() != PK_STANDARD)
continue;
mpDoc->SetSelected(pPage, true);
aUnselect.push_back(pPage);
}
}
}
}
std::vector<SdPage*> aSelectedPages;
std::vector<sal_uInt16> aSelectedPageNums;
// determine the active pages
for (sal_uInt16 nPage = 0; nPage < mpDoc->GetSdPageCount(PK_STANDARD); nPage++)
{
SdPage* pPage = mpDoc->GetSdPage(nPage, PK_STANDARD);
if (pPage->IsSelected())
{
aSelectedPages.push_back(pPage);
aSelectedPageNums.push_back(nPage);
}
}
assert(!aSelectedPages.empty() && "no selected page");
OUString aOldLayoutName(aSelectedPages.back()->GetLayoutName());
sal_Int32 nPos = aOldLayoutName.indexOf(SD_LT_SEPARATOR);
if (nPos != -1)
aOldLayoutName = aOldLayoutName.copy(0, nPos);
bool bMasterPage = bOnMaster;
bool bCheckMasters = false;
// call dialog
bool bLoad = false; // appear the new master pages?
OUString aFile;
SfxItemSet aSet(mpDoc->GetPool(), ATTR_PRESLAYOUT_START, ATTR_PRESLAYOUT_END);
aSet.Put( SfxBoolItem( ATTR_PRESLAYOUT_LOAD, bLoad));
aSet.Put( SfxBoolItem( ATTR_PRESLAYOUT_MASTER_PAGE, bMasterPage ) );
aSet.Put( SfxBoolItem( ATTR_PRESLAYOUT_CHECK_MASTERS, bCheckMasters ) );
aSet.Put( SfxStringItem( ATTR_PRESLAYOUT_NAME, aOldLayoutName));
const SfxItemSet *pArgs = rReq.GetArgs ();
if (pArgs)
{
if (pArgs->GetItemState(ATTR_PRESLAYOUT_LOAD) == SfxItemState::SET)
bLoad = static_cast<const SfxBoolItem&>(pArgs->Get(ATTR_PRESLAYOUT_LOAD)).GetValue();
if( pArgs->GetItemState( ATTR_PRESLAYOUT_MASTER_PAGE ) == SfxItemState::SET )
bMasterPage = static_cast<const SfxBoolItem&>( pArgs->Get( ATTR_PRESLAYOUT_MASTER_PAGE ) ).GetValue();
if( pArgs->GetItemState( ATTR_PRESLAYOUT_CHECK_MASTERS ) == SfxItemState::SET )
bCheckMasters = static_cast<const SfxBoolItem&>( pArgs->Get( ATTR_PRESLAYOUT_CHECK_MASTERS ) ).GetValue();
if (pArgs->GetItemState(ATTR_PRESLAYOUT_NAME) == SfxItemState::SET)
aFile = static_cast<const SfxStringItem&>(pArgs->Get(ATTR_PRESLAYOUT_NAME)).GetValue();
}
else
{
SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create();
boost::scoped_ptr<AbstractSdPresLayoutDlg> pDlg(pFact ? pFact->CreateSdPresLayoutDlg(mpDocSh, NULL, aSet ) : 0);
sal_uInt16 nResult = pDlg ? pDlg->Execute() : static_cast<short>(RET_CANCEL);
switch (nResult)
{
case RET_OK:
{
pDlg->GetAttr(aSet);
if (aSet.GetItemState(ATTR_PRESLAYOUT_LOAD) == SfxItemState::SET)
bLoad = static_cast<const SfxBoolItem&>(aSet.Get(ATTR_PRESLAYOUT_LOAD)).GetValue();
if( aSet.GetItemState( ATTR_PRESLAYOUT_MASTER_PAGE ) == SfxItemState::SET )
bMasterPage = static_cast<const SfxBoolItem&>(aSet.Get( ATTR_PRESLAYOUT_MASTER_PAGE ) ).GetValue();
if( aSet.GetItemState( ATTR_PRESLAYOUT_CHECK_MASTERS ) == SfxItemState::SET )
bCheckMasters = static_cast<const SfxBoolItem&>(aSet.Get( ATTR_PRESLAYOUT_CHECK_MASTERS ) ).GetValue();
if (aSet.GetItemState(ATTR_PRESLAYOUT_NAME) == SfxItemState::SET)
aFile = static_cast<const SfxStringItem&>(aSet.Get(ATTR_PRESLAYOUT_NAME)).GetValue();
}
break;
default:
bError = true;
}
}
if (!bError)
{
mpDocSh->SetWaitCursor( true );
/* Here, we only exchange masterpages, therefore the current page
remains the current page. To prevent calling PageOrderChangedHint
during insertion and extraction of the masterpages, we block. */
/* That isn't quitely right. If the masterpageview is active and you are
removing a masterpage, it's possible that you are removing the
current masterpage. So you have to call ResetActualPage ! */
if( mpViewShell->ISA(DrawViewShell) && !bCheckMasters )
static_cast<DrawView*>(mpView)->BlockPageOrderChangedHint(true);
if (bLoad)
{
OUString aFileName = aFile.getToken(0, DOCUMENT_TOKEN);
SdDrawDocument* pTempDoc = mpDoc->OpenBookmarkDoc( aFileName );
// #69581: If I chose the standard-template I got no filename and so I get no
// SdDrawDocument-Pointer. But the method SetMasterPage is able to handle
// a NULL-pointer as a Standard-template ( look at SdDrawDocument::SetMasterPage )
OUString aLayoutName;
if( pTempDoc )
aLayoutName = aFile.getToken(1, DOCUMENT_TOKEN);
for (auto nSelectedPage : aSelectedPageNums)
mpDoc->SetMasterPage(nSelectedPage, aLayoutName, pTempDoc, bMasterPage, bCheckMasters);
mpDoc->CloseBookmarkDoc();
}
else
{
// use master page with the layout name aFile from current Doc
for (auto nSelectedPage : aSelectedPageNums)
mpDoc->SetMasterPage(nSelectedPage, aFile, mpDoc, bMasterPage, bCheckMasters);
}
// remove blocking
if (mpViewShell->ISA(DrawViewShell) && !bCheckMasters )
static_cast<DrawView*>(mpView)->BlockPageOrderChangedHint(false);
// if the master page was visible, show it again
if (!bError)
{
if (bOnMaster)
{
if (mpViewShell->ISA(DrawViewShell))
{
::sd::View* pView =
static_cast<DrawViewShell*>(mpViewShell)->GetView();
for (auto pSelectedPage : aSelectedPages)
{
sal_uInt16 nPgNum = pSelectedPage->TRG_GetMasterPage().GetPageNum();
if (static_cast<DrawViewShell*>(mpViewShell)->GetPageKind() == PK_NOTES)
nPgNum++;
pView->HideSdrPage();
pView->ShowSdrPage(pView->GetModel()->GetMasterPage(nPgNum));
}
}
// force update of TabBar
mpViewShell->GetViewFrame()->GetDispatcher()->Execute(SID_MASTERPAGE, SfxCallMode::ASYNCHRON | SfxCallMode::RECORD);
}
else
{
for (auto pSelectedPage : aSelectedPages)
pSelectedPage->SetAutoLayout(pSelectedPage->GetAutoLayout());
}
}
//Undo transfer to document selection
for (auto pPage : aUnselect)
mpDoc->SetSelected(pPage, false);
// fake a mode change to repaint the page tab bar
if( mpViewShell && mpViewShell->ISA( DrawViewShell ) )
{
DrawViewShell* pDrawViewSh =
static_cast<DrawViewShell*>(mpViewShell);
EditMode eMode = pDrawViewSh->GetEditMode();
bool bLayer = pDrawViewSh->IsLayerModeActive();
pDrawViewSh->ChangeEditMode( eMode, !bLayer );
pDrawViewSh->ChangeEditMode( eMode, bLayer );
}
mpDocSh->SetWaitCursor( false );
}
}
} // end of namespace sd
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */