mir/libreoffice
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
07d85c44998f42545175ee77c192b901b52a30ca
libreoffice/sd/source/ui/view/drviews7.cxx
Christian Lohmaier ab465b90f6 bin/rename-sw-abbreviations.sh 
renames the most annoying abbreviations in Writer (and partially
in the shared code too).

Change-Id: I9a62759138126c1537cc5c985ba05cf54d6132d9
2015-05-20 13:05:49 +02:00

1808 lines
66 KiB
C++
Raw Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <sal/config.h>
#include <utility>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/lang/Locale.hpp>
#include <com/sun/star/linguistic2/XThesaurus.hpp>
#include <svx/fmglob.hxx>
#include <svx/globl3d.hxx>
#include <svx/svdouno.hxx>
#include <editeng/eeitem.hxx>
#include <editeng/flditem.hxx>
#include <editeng/outlobj.hxx>
#include <officecfg/Office/Common.hxx>
#include <officecfg/Office/Impress.hxx>
#include <svx/svxids.hrc>
#include <svx/svdpagv.hxx>
#include <svx/clipfmtitem.hxx>
#include <svx/fmshell.hxx>
#include <svl/eitem.hxx>
#include <svl/aeitem.hxx>
#include <svl/stritem.hxx>
#include <svl/visitem.hxx>
#include <svl/whiter.hxx>
#include <sfx2/dispatch.hxx>
#include <svx/svdograf.hxx>
#include <editeng/unolingu.hxx>
#include <svx/extrusionbar.hxx>
#include <svx/fontworkbar.hxx>
// #UndoRedo#
#include <svl/slstitm.hxx>
#include <sfx2/app.hxx>
#include <svtools/insdlg.hxx>
#include <unotools/moduleoptions.hxx>
#include <svl/languageoptions.hxx>
#include <comphelper/processfactory.hxx>
#include <sfx2/request.hxx>
#include <svx/pfiledlg.hxx>
#include <svx/grafctrl.hxx>
#include <svtools/cliplistener.hxx>
#include <sfx2/viewfrm.hxx>
#include "app.hrc"
#include "glob.hrc"
#include "res_bmp.hrc"
#include "PresentationViewShell.hxx"
#include "Outliner.hxx"
#include "drawdoc.hxx"
#include "sdresid.hxx"
#include "sdpage.hxx"
#include "Client.hxx"
#include "DrawDocShell.hxx"
#include "zoomlist.hxx"
#include "slideshow.hxx"
#include "drawview.hxx"
#include "ViewShellBase.hxx"
#include "ViewShellManager.hxx"
#include "LayerTabBar.hxx"
#include "fupoor.hxx"
#include "Window.hxx"
#include "fuediglu.hxx"
#include "fubullet.hxx"
#include "fuformatpaintbrush.hxx"
#include <config_features.h>
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::lang;
using namespace ::com::sun::star::linguistic2;
/** Create a list of clipboard formats that are supported both from the
current clipboard content and the DrawViewShell.
The list is stored in a new instance of SvxClipboardFormatItem.
*/
::std::unique_ptr<SvxClipboardFormatItem> GetSupportedClipboardFormats (
TransferableDataHelper& rDataHelper)
{
::std::unique_ptr<SvxClipboardFormatItem> pResult (
new SvxClipboardFormatItem(SID_CLIPBOARD_FORMAT_ITEMS));
sal_uInt32 nFormatCount (rDataHelper.GetFormatCount());
for (sal_uInt32 i=0; i<nFormatCount; i++)
{
const SotClipboardFormatId nTestFormat = rDataHelper.GetFormat(i);
// Check if the current format is the same as one that has already
// been handled.
bool bDuplicate (false);
for (sal_uInt32 j=0; j<i; j++)
{
if (nTestFormat == rDataHelper.GetFormat(j))
{
bDuplicate = true;
break;
}
}
// Look up the format among those that are supported by the
// DrawViewShell.
if ( ! bDuplicate)
{
switch (nTestFormat)
{
case SotClipboardFormatId::EMBED_SOURCE:
{
OUString sName;
TransferableObjectDescriptor aDescriptor;
if (rDataHelper.GetTransferableObjectDescriptor(
SotClipboardFormatId::OBJECTDESCRIPTOR, aDescriptor))
{
sName = aDescriptor.maTypeName;
}
if (!sName.isEmpty())
pResult->AddClipbrdFormat(nTestFormat, sName);
else
pResult->AddClipbrdFormat(nTestFormat);
break;
}
case SotClipboardFormatId::LINK_SOURCE:
case SotClipboardFormatId::DRAWING:
case SotClipboardFormatId::SVXB:
case SotClipboardFormatId::GDIMETAFILE:
case SotClipboardFormatId::BITMAP:
case SotClipboardFormatId::NETSCAPE_BOOKMARK:
case SotClipboardFormatId::STRING:
case SotClipboardFormatId::HTML:
case SotClipboardFormatId::RTF:
case SotClipboardFormatId::EDITENGINE:
pResult->AddClipbrdFormat(nTestFormat);
break;
default: break;
}
}
}
// Check some OLE formats whose names are handled differently.
SotClipboardFormatId nFormat (SotClipboardFormatId::EMBED_SOURCE_OLE);
bool bHasFormat (rDataHelper.HasFormat(nFormat));
if ( ! bHasFormat)
{
bHasFormat = rDataHelper.HasFormat(nFormat);
}
if (bHasFormat)
{
OUString sName;
OUString sSource;
if (SvPasteObjectHelper::GetEmbeddedName (rDataHelper, sName, sSource, nFormat))
pResult->AddClipbrdFormat (nFormat, sName);
}
return pResult;
}
namespace sd {
IMPL_LINK( DrawViewShell, ClipboardChanged, TransferableDataHelper*, pDataHelper )
{
if ( pDataHelper )
{
mbPastePossible = ( pDataHelper->GetFormatCount() != 0 );
// Update the list of supported clipboard formats according to the
// new clipboard content.
// There are some stack traces that indicate the possibility of the
// DrawViewShell destructor called during the call to
// GetSupportedClipboardFormats(). If that really has happened then
// exit immediately.
TransferableDataHelper aDataHelper (
TransferableDataHelper::CreateFromSystemClipboard(GetActiveWindow()));
::std::unique_ptr<SvxClipboardFormatItem> pFormats (GetSupportedClipboardFormats(aDataHelper));
if (mpDrawView == NULL)
return 0;
mpCurrentClipboardFormats = std::move(pFormats);
SfxBindings& rBindings = GetViewFrame()->GetBindings();
rBindings.Invalidate( SID_PASTE );
rBindings.Invalidate( SID_PASTE_SPECIAL );
rBindings.Invalidate( SID_PASTE_UNFORMATTED );
rBindings.Invalidate( SID_CLIPBOARD_FORMAT_ITEMS );
}
return 0;
}
void DrawViewShell::GetDrawAttrState(SfxItemSet& rSet)
{
SfxItemSet aSet( mpDrawView->GetGeoAttrFromMarked() );
rSet.Put(aSet,false);
}
::Outliner* DrawViewShell::GetOutlinerForMasterPageOutlineTextObj(ESelection &rSel)
{
if( !mpDrawView )
return NULL;
//when there is one object selected
if (!mpDrawView->AreObjectsMarked() || (mpDrawView->GetMarkedObjectList().GetMarkCount() != 1))
return NULL;
//and we are editing the outline object
if (!mpDrawView->IsTextEdit())
return NULL;
SdrPageView* pPageView = mpDrawView->GetSdrPageView();
if (!pPageView)
return NULL;
SdPage* pPage = static_cast<SdPage*>(pPageView->GetPage());
//only show these in a normal master page
if (!pPage || (pPage->GetPageKind() != PK_STANDARD) || !pPage->IsMasterPage())
return NULL;
OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
::Outliner* pOL = pOLV ? pOLV->GetOutliner() : NULL;
if (!pOL)
return NULL;
rSel = pOLV->GetSelection();
return pOL;
}
void DrawViewShell::GetMenuState( SfxItemSet &rSet )
{
if (mpDrawView == NULL)
{
// This assertion and return are here to prevent crashes.
DBG_ASSERT(mpDrawView!=NULL, "Please report this assertion to the Impress team.");
return;
}
ViewShell::GetMenuState(rSet);
bool bDisableVerticalText = !SvtLanguageOptions().IsVerticalTextEnabled();
if ( bDisableVerticalText )
{
rSet.DisableItem( SID_DRAW_FONTWORK_VERTICAL );
rSet.DisableItem( SID_DRAW_CAPTION_VERTICAL );
rSet.DisableItem( SID_TEXT_FITTOSIZE_VERTICAL );
rSet.DisableItem( SID_DRAW_TEXT_VERTICAL );
}
bool bConvertToPathPossible = mpDrawView->IsConvertToPathObjPossible(false);
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
const size_t nMarkCount = rMarkList.GetMarkCount();
//format paintbrush
FuFormatPaintBrush::GetMenuState( *this, rSet );
// State of SfxChild-Windows (Animator, Fontwork etc.)
SetChildWindowState( rSet );
// map images of toolboxes (only zoom)
UpdateToolboxImages( rSet, false );
if(HasCurrentFunction())
{
sal_uInt16 nSId = GetCurrentFunction()->GetSlotID();
rSet.Put( SfxBoolItem( nSId, true ) );
// will cause a uncheck of a simulated slot
sal_uInt16 nId = GetIdBySubId( nSId );
// map images of the toolboxes
UpdateToolboxImages( rSet );
if( nSId != SID_ZOOM_TOOLBOX &&
nSId != SID_DRAWTBX_INSERT &&
nSId != SID_POSITION &&
nSId != SID_OBJECT_ALIGN )
{
if( nId != SID_OBJECT_CHOOSE_MODE )
rSet.Put( TbxImageItem( SID_OBJECT_CHOOSE_MODE, 0 ) );
if( nId != SID_DRAWTBX_TEXT )
rSet.Put( TbxImageItem( SID_DRAWTBX_TEXT, 0 ) );
if( nId != SID_DRAWTBX_RECTANGLES )
rSet.Put( TbxImageItem( SID_DRAWTBX_RECTANGLES, 0 ) );
if( nId != SID_DRAWTBX_ELLIPSES )
rSet.Put( TbxImageItem( SID_DRAWTBX_ELLIPSES, 0 ) );
if( nId != SID_DRAWTBX_LINES )
rSet.Put( TbxImageItem( SID_DRAWTBX_LINES, 0 ) );
if( nId != SID_DRAWTBX_ARROWS )
rSet.Put( TbxImageItem( SID_DRAWTBX_ARROWS, 0 ) );
if( nId != SID_DRAWTBX_3D_OBJECTS )
rSet.Put( TbxImageItem( SID_DRAWTBX_3D_OBJECTS, 0 ) );
if( nId != SID_DRAWTBX_CONNECTORS )
rSet.Put( TbxImageItem( SID_DRAWTBX_CONNECTORS, 0 ) );
}
}
SdrPageView* pPageView = mpDrawView->GetSdrPageView();
GetMenuStateSel(rSet);
if (SfxItemState::DEFAULT == rSet.GetItemState(SID_ASSIGN_LAYOUT))
{
bool bDisable = true;
if( pPageView )
{
SdPage* pPage = dynamic_cast< SdPage* >( pPageView->GetPage() );
if( pPage && !pPage->IsMasterPage() )
{
rSet.Put( SfxUInt32Item( SID_ASSIGN_LAYOUT, static_cast< sal_uInt32 >(pPage->GetAutoLayout()) ) );
bDisable = false;
}
}
if(bDisable)
{
rSet.DisableItem(SID_ASSIGN_LAYOUT);
}
}
if (SfxItemState::DEFAULT == rSet.GetItemState(SID_EXPAND_PAGE))
{
bool bDisable = true;
if( pPageView )
{
SdPage* pPage = dynamic_cast< SdPage* >( pPageView->GetPage() );
if( pPage && (pPage->GetPageKind() == PK_STANDARD) && !pPage->IsMasterPage() )
{
SdrObject* pObj = pPage->GetPresObj(PRESOBJ_OUTLINE);
if (pObj!=NULL )
{
if( !pObj->IsEmptyPresObj() )
{
bDisable = false;
}
else
{
// check if the object is in edit, than its temporarely not empty
SdrTextObj* pTextObj = dynamic_cast< SdrTextObj* >( pObj );
if( pTextObj )
{
OutlinerParaObject* pParaObj = pTextObj->GetEditOutlinerParaObject();
if( pParaObj )
{
delete pParaObj;
bDisable = false;
}
}
}
}
}
}
if(bDisable)
{
rSet.DisableItem(SID_EXPAND_PAGE);
}
}
if (SfxItemState::DEFAULT == rSet.GetItemState(SID_SUMMARY_PAGE))
{
bool bDisable = true;
if( pPageView )
{
SdPage* pPage = dynamic_cast< SdPage* >( pPageView->GetPage() );
if( pPage && (pPage->GetPageKind() == PK_STANDARD) && !pPage->IsMasterPage() )
{
SdrObject* pObj = pPage->GetPresObj(PRESOBJ_TITLE);
if(pObj && !pObj->IsEmptyPresObj())
{
bDisable = false;
}
}
}
if(bDisable)
{
rSet.DisableItem(SID_SUMMARY_PAGE);
}
}
if (SfxItemState::DEFAULT == rSet.GetItemState(SID_ASSIGN_LAYOUT))
{
bool bDisable = true;
if( pPageView )
{
SdPage* pPage = dynamic_cast< SdPage* >( pPageView->GetPage() );
if( pPage && !pPage->IsMasterPage() )
{
rSet.Put( SfxUInt32Item(SID_ASSIGN_LAYOUT, pPage->GetAutoLayout()) );
bDisable = false;
}
}
if(bDisable)
{
rSet.DisableItem(SID_ASSIGN_LAYOUT);
}
}
// is it possible to start the presentation?
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_PRESENTATION ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_REHEARSE_TIMINGS ) )
{
bool bDisable = true;
sal_uInt16 nCount = GetDoc()->GetSdPageCount( PK_STANDARD );
for( sal_uInt16 i = 0; i < nCount && bDisable; i++ )
{
SdPage* pPage = GetDoc()->GetSdPage(i, PK_STANDARD);
if( !pPage->IsExcluded() )
bDisable = false;
}
if( bDisable || GetDocSh()->IsPreview())
{
rSet.DisableItem( SID_PRESENTATION );
rSet.DisableItem( SID_REHEARSE_TIMINGS );
}
}
// glue points
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_EDITMODE ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_INSERT_POINT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_PERCENT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_ESCDIR ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_ESCDIR_LEFT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_ESCDIR_RIGHT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_ESCDIR_TOP ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_ESCDIR_BOTTOM ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_HORZALIGN_CENTER ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_HORZALIGN_LEFT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_HORZALIGN_RIGHT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_VERTALIGN_CENTER ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_VERTALIGN_TOP ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_GLUE_VERTALIGN_BOTTOM ) )
{
// percent
SDR_TRISTATE eState = mpDrawView->IsMarkedGluePointsPercent();
if( eState == TRISTATE_INDET )
rSet.InvalidateItem( SID_GLUE_PERCENT );
else
rSet.Put( SfxBoolItem( SID_GLUE_PERCENT, eState == TRISTATE_TRUE ) );
// alignment has no effect by percent
if( eState == TRISTATE_TRUE )
{
rSet.DisableItem( SID_GLUE_HORZALIGN_CENTER );
rSet.DisableItem( SID_GLUE_HORZALIGN_LEFT );
rSet.DisableItem( SID_GLUE_HORZALIGN_RIGHT );
rSet.DisableItem( SID_GLUE_VERTALIGN_CENTER );
rSet.DisableItem( SID_GLUE_VERTALIGN_TOP );
rSet.DisableItem( SID_GLUE_VERTALIGN_BOTTOM );
}
else
{
// horizontal alignment
SdrAlign nHorz = mpDrawView->GetMarkedGluePointsAlign( false );
rSet.Put( SfxBoolItem( SID_GLUE_HORZALIGN_CENTER, nHorz == SdrAlign::HORZ_CENTER ) );
rSet.Put( SfxBoolItem( SID_GLUE_HORZALIGN_LEFT, nHorz == SdrAlign::HORZ_LEFT ) );
rSet.Put( SfxBoolItem( SID_GLUE_HORZALIGN_RIGHT, nHorz == SdrAlign::HORZ_RIGHT ) );
// vertical alignment
SdrAlign nVert = mpDrawView->GetMarkedGluePointsAlign( true );
rSet.Put( SfxBoolItem( SID_GLUE_VERTALIGN_CENTER, nVert == SdrAlign::VERT_CENTER ) );
rSet.Put( SfxBoolItem( SID_GLUE_VERTALIGN_TOP, nVert == SdrAlign::VERT_TOP ) );
rSet.Put( SfxBoolItem( SID_GLUE_VERTALIGN_BOTTOM, nVert == SdrAlign::VERT_BOTTOM ) );
}
// insert point
rSet.Put( SfxBoolItem( SID_GLUE_INSERT_POINT, mpDrawView->IsInsGluePointMode() ) );
// Escape direction
// left
eState = mpDrawView->IsMarkedGluePointsEscDir( SdrEscapeDirection::LEFT );
if( eState == TRISTATE_INDET )
rSet.InvalidateItem( SID_GLUE_ESCDIR_LEFT );
else
rSet.Put( SfxBoolItem( SID_GLUE_ESCDIR_LEFT, eState == TRISTATE_TRUE ) );
// right
eState = mpDrawView->IsMarkedGluePointsEscDir( SdrEscapeDirection::RIGHT );
if( eState == TRISTATE_INDET )
rSet.InvalidateItem( SID_GLUE_ESCDIR_RIGHT );
else
rSet.Put( SfxBoolItem( SID_GLUE_ESCDIR_RIGHT, eState == TRISTATE_TRUE ) );
// top
eState = mpDrawView->IsMarkedGluePointsEscDir( SdrEscapeDirection::TOP );
if( eState == TRISTATE_INDET )
rSet.InvalidateItem( SID_GLUE_ESCDIR_TOP );
else
rSet.Put( SfxBoolItem( SID_GLUE_ESCDIR_TOP, eState == TRISTATE_TRUE ) );
// bottom
eState = mpDrawView->IsMarkedGluePointsEscDir( SdrEscapeDirection::BOTTOM );
if( eState == TRISTATE_INDET )
rSet.InvalidateItem( SID_GLUE_ESCDIR_BOTTOM );
else
rSet.Put( SfxBoolItem( SID_GLUE_ESCDIR_BOTTOM, eState == TRISTATE_TRUE ) );
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_GRID_FRONT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_HELPLINES_FRONT ) )
{
rSet.Put( SfxBoolItem( SID_GRID_FRONT, mpDrawView->IsGridFront() ) );
rSet.Put( SfxBoolItem( SID_HELPLINES_FRONT, mpDrawView->IsHlplFront() ) );
}
if (!mpDrawView->IsFrameDragSingles())
rSet.Put(SfxBoolItem(SID_BEZIER_EDIT, true));
else
rSet.Put(SfxBoolItem(SID_BEZIER_EDIT, false));
if(dynamic_cast<FuEditGluePoints*>( GetCurrentFunction().get()))
rSet.Put(SfxBoolItem(SID_GLUE_EDITMODE, true));
else
rSet.Put(SfxBoolItem(SID_GLUE_EDITMODE, false));
if( !mpDrawView->IsMirrorAllowed( true, true ) )
{
rSet.DisableItem( SID_HORIZONTAL );
rSet.DisableItem( SID_VERTICAL );
rSet.DisableItem( SID_FLIP_HORIZONTAL );
rSet.DisableItem( SID_FLIP_VERTICAL );
}
if( !mpDrawView->IsMirrorAllowed() )
{
rSet.DisableItem( SID_OBJECT_MIRROR );
// rSet.DisableItem( SID_CONVERT_TO_3D_LATHE );
// rSet.DisableItem( SID_CONVERT_TO_3D_LATHE_FAST );
}
// interactive transparence control
if(!mpDrawView->IsTransparenceAllowed())
{
rSet.DisableItem( SID_OBJECT_TRANSPARENCE );
}
// interactive gradient control
if(!mpDrawView->IsGradientAllowed())
{
rSet.DisableItem( SID_OBJECT_GRADIENT );
}
// disable morphing if necessary
if ( !mpDrawView->IsMorphingAllowed() )
rSet.DisableItem( SID_POLYGON_MORPHING );
// disable vectorizing if necessary
if ( !mpDrawView->IsVectorizeAllowed() )
rSet.DisableItem( SID_VECTORIZE );
if( !mpDrawView->IsReverseOrderPossible() )
{
rSet.DisableItem( SID_REVERSE_ORDER );
}
if ( !bConvertToPathPossible &&
!mpDrawView->IsCrookAllowed( mpDrawView->IsCrookNoContortion() ) )
{
// implicit transformation into curve not possible
rSet.DisableItem(SID_OBJECT_CROOK_ROTATE);
rSet.DisableItem(SID_OBJECT_CROOK_SLANT);
rSet.DisableItem(SID_OBJECT_CROOK_STRETCH);
}
if ( !mpDrawView->IsGroupEntered() )
{
rSet.DisableItem( SID_LEAVE_GROUP );
rSet.Put( SfxBoolItem( SID_LEAVE_ALL_GROUPS, false ) );
rSet.ClearItem( SID_LEAVE_ALL_GROUPS );
rSet.DisableItem( SID_LEAVE_ALL_GROUPS );
}
else
rSet.Put( SfxBoolItem( SID_LEAVE_ALL_GROUPS, true ) );
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_THESAURUS ) )
{
if ( !mpDrawView->IsTextEdit() )
{
rSet.DisableItem( SID_THESAURUS );
}
else
{
LanguageType eLang = GetDoc()->GetLanguage( EE_CHAR_LANGUAGE );
Reference< XThesaurus > xThesaurus( LinguMgr::GetThesaurus() );
if (!xThesaurus.is() || eLang == LANGUAGE_NONE || !xThesaurus->hasLocale( LanguageTag::convertToLocale( eLang)) )
rSet.DisableItem( SID_THESAURUS );
}
}
if ( !mpDrawView->IsTextEdit() )
{
rSet.DisableItem( SID_THESAURUS );
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_SELECTALL ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_SIZE_ALL ) )
{
if( pPageView && pPageView->GetObjList()->GetObjCount() == 0 )
{
// should be disabled if there is no object on the draw area:
rSet.DisableItem( SID_SELECTALL );
rSet.DisableItem( SID_SIZE_ALL );
}
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_CONTEXT ) )
rSet.Put( SfxStringItem( SID_CONTEXT, mpDrawView->GetStatusText() ) );
// clipboard (paste)
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_PASTE ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_PASTE_SPECIAL ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_PASTE_UNFORMATTED ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_CLIPBOARD_FORMAT_ITEMS ) )
{
if ( !mpClipEvtLstnr )
{
// avoid clipboard initialization for
// read-only presentation views (workaround for NT4.0
// clipboard prob...)
if( !ISA(PresentationViewShell) )
{
// create listener
mpClipEvtLstnr = new TransferableClipboardListener( LINK( this, DrawViewShell, ClipboardChanged ) );
mpClipEvtLstnr->acquire();
mpClipEvtLstnr->AddRemoveListener( GetActiveWindow(), true );
// get initial state
TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSystemClipboard( GetActiveWindow() ) );
mbPastePossible = ( aDataHelper.GetFormatCount() != 0 );
}
else
mbPastePossible = false;
}
if( !mbPastePossible )
{
rSet.DisableItem( SID_PASTE );
rSet.DisableItem( SID_PASTE_SPECIAL );
rSet.DisableItem( SID_PASTE_UNFORMATTED );
rSet.DisableItem( SID_CLIPBOARD_FORMAT_ITEMS );
}
else if( SfxItemState::DEFAULT == rSet.GetItemState( SID_CLIPBOARD_FORMAT_ITEMS ) )
{
if (mpCurrentClipboardFormats.get() != NULL)
rSet.Put(*mpCurrentClipboardFormats);
}
}
if ( !bConvertToPathPossible )
{
rSet.DisableItem(SID_CHANGEBEZIER);
}
if (mpDrawView == NULL)
{
// The mpDrawView was not NULL but is now.
// The reason for this may be that the DrawViewShell has been
// destroyed in the mean time.
// We can only return immediately and hope that the deleted
// DrawViewShell is not called again.
DBG_ASSERT(mpDrawView!=NULL, "Please report this assertion to the Impress team.");
return;
}
if( !( mpDrawView->IsConvertToPolyObjPossible(false) || mpDrawView->IsVectorizeAllowed() ) )
rSet.DisableItem(SID_CHANGEPOLYGON);
if( !( mpDrawView->IsConvertToPolyObjPossible(false) || mpDrawView->IsConvertToContourPossible() ) )
rSet.DisableItem(SID_CONVERT_TO_CONTOUR);
if ( !mpDrawView->IsConvertTo3DObjPossible() )
{
rSet.DisableItem(SID_CONVERT_TO_3D);
rSet.DisableItem(SID_CONVERT_TO_3D_LATHE);
rSet.DisableItem(SID_CONVERT_TO_3D_LATHE_FAST);
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_MANAGE_LINKS ) )
{
if ( GetDoc()->GetLinkCount() == 0 )
{
rSet.DisableItem(SID_MANAGE_LINKS);
}
}
if (mePageKind == PK_HANDOUT)
{
rSet.DisableItem(SID_PRESENTATION_LAYOUT);
rSet.DisableItem(SID_SELECT_BACKGROUND);
}
if (mePageKind == PK_NOTES)
{
rSet.DisableItem(SID_INSERTPAGE);
rSet.DisableItem(SID_RENAMEPAGE);
rSet.DisableItem(SID_RENAMEPAGE_QUICK);
rSet.DisableItem(SID_DUPLICATE_PAGE);
rSet.ClearItem(SID_ANIMATION_OBJECTS);
rSet.DisableItem(SID_ANIMATION_OBJECTS);
rSet.DisableItem(SID_ANIMATION_EFFECTS);
if (meEditMode == EM_MASTERPAGE)
rSet.DisableItem(SID_MODIFYPAGE);
rSet.DisableItem(SID_SELECT_BACKGROUND);
rSet.DisableItem(SID_INSERTLAYER);
rSet.DisableItem(SID_LAYERMODE);
rSet.DisableItem(SID_INSERTFILE);
}
else if (mePageKind == PK_HANDOUT)
{
rSet.DisableItem(SID_INSERTPAGE);
rSet.DisableItem(SID_DUPLICATE_PAGE);
rSet.ClearItem(SID_ANIMATION_OBJECTS);
rSet.DisableItem(SID_ANIMATION_OBJECTS);
rSet.DisableItem(SID_ANIMATION_EFFECTS);
rSet.DisableItem(SID_RENAMEPAGE);
rSet.DisableItem(SID_RENAMEPAGE_QUICK);
rSet.DisableItem(SID_INSERTLAYER);
rSet.DisableItem(SID_MODIFYLAYER);
rSet.DisableItem(SID_RENAMELAYER);
rSet.DisableItem(SID_LAYERMODE);
rSet.DisableItem(SID_INSERTFILE);
rSet.DisableItem(SID_PAGEMODE);
rSet.DisableItem(SID_SELECT_BACKGROUND);
}
else
{
if (meEditMode == EM_MASTERPAGE)
{
rSet.DisableItem(SID_INSERTPAGE);
rSet.DisableItem(SID_DUPLICATE_PAGE);
rSet.DisableItem(SID_MODIFYPAGE);
rSet.ClearItem(SID_ANIMATION_OBJECTS);
rSet.DisableItem(SID_ANIMATION_OBJECTS);
}
rSet.Put (SfxBoolItem (SID_LAYERMODE, IsLayerModeActive()));
}
if ( ! IsLayerModeActive())
{
rSet.DisableItem( SID_INSERTLAYER );
rSet.DisableItem( SID_MODIFYLAYER );
rSet.DisableItem( SID_DELETE_LAYER );
rSet.DisableItem( SID_RENAMELAYER );
}
if (meEditMode == EM_PAGE)
{
/**********************************************************************
* page mode
**********************************************************************/
rSet.Put(SfxBoolItem(SID_PAGEMODE, true));
rSet.Put(SfxBoolItem(SID_MASTERPAGE, false));
rSet.Put(SfxBoolItem(SID_SLIDE_MASTERPAGE, false));
rSet.Put(SfxBoolItem(SID_NOTES_MASTERPAGE, false));
rSet.Put(SfxBoolItem(SID_HANDOUT_MASTERPAGE, false));
if (mePageKind == PK_STANDARD &&
rSet.GetItemState(SID_TITLE_MASTERPAGE) == SfxItemState::DEFAULT)
{
// Is there a page with the AutoLayout "Title"?
bool bDisable = true;
sal_uInt16 i = 0;
sal_uInt16 nCount = GetDoc()->GetSdPageCount(PK_STANDARD);
while (i < nCount && bDisable)
{
SdPage* pPage = GetDoc()->GetSdPage(i, PK_STANDARD);
if (pPage->GetAutoLayout() == AUTOLAYOUT_TITLE)
{
bDisable = false;
}
i++;
}
if (bDisable)
{
rSet.DisableItem(SID_TITLE_MASTERPAGE);
}
else
{
rSet.Put(SfxBoolItem(SID_TITLE_MASTERPAGE, false));
}
}
else
{
rSet.DisableItem(SID_TITLE_MASTERPAGE);
}
rSet.DisableItem (SID_INSERT_MASTER_PAGE);
rSet.DisableItem (SID_DELETE_MASTER_PAGE);
rSet.DisableItem (SID_RENAME_MASTER_PAGE);
rSet.DisableItem (SID_CLOSE_MASTER_VIEW);
}
else
{
rSet.Put(SfxBoolItem(SID_PAGEMODE, false));
rSet.Put(SfxBoolItem(SID_MASTERPAGE, true));
/**********************************************************************
* Background page mode
**********************************************************************/
if (mePageKind == PK_STANDARD)
{
rSet.Put(SfxBoolItem(SID_SLIDE_MASTERPAGE, true));
rSet.Put(SfxBoolItem(SID_NOTES_MASTERPAGE, false));
rSet.Put(SfxBoolItem(SID_HANDOUT_MASTERPAGE, false));
if (rSet.GetItemState(SID_TITLE_MASTERPAGE) == SfxItemState::DEFAULT)
{
bool bCheck = false;
bool bDisable = true;
if( pPageView )
{
SdPage* pMPage = dynamic_cast< SdPage* >( pPageView->GetPage() );
sal_uInt16 i = 0;
sal_uInt16 nCount = GetDoc()->GetSdPageCount(PK_STANDARD);
// Is there a reference to the current master page from a page
// with the AutoLayout "Title"?
while (i < nCount && !bCheck && bDisable)
{
SdPage* pPage = GetDoc()->GetSdPage(i, PK_STANDARD);
// page does reference the current master page
if (pPage->GetAutoLayout() == AUTOLAYOUT_TITLE)
{
// a page does have a AutoLayout "Title"
bDisable = false;
SdPage& rRefMPage = static_cast<SdPage&>(pPage->TRG_GetMasterPage());
if(&rRefMPage == pMPage)
{
// a page with the AutoLayout "Title" does reference
// the current master page
bCheck = true;
}
}
i++;
}
}
if (bCheck)
{
rSet.Put(SfxBoolItem(SID_SLIDE_MASTERPAGE, false));
}
rSet.Put(SfxBoolItem(SID_TITLE_MASTERPAGE, bCheck));
if (bDisable)
{
rSet.ClearItem(SID_TITLE_MASTERPAGE);
rSet.DisableItem(SID_TITLE_MASTERPAGE);
}
}
}
else if (mePageKind == PK_NOTES)
{
rSet.Put(SfxBoolItem(SID_SLIDE_MASTERPAGE, false));
rSet.DisableItem(SID_TITLE_MASTERPAGE);
rSet.Put(SfxBoolItem(SID_NOTES_MASTERPAGE, true));
rSet.Put(SfxBoolItem(SID_HANDOUT_MASTERPAGE, false));
}
else if (mePageKind == PK_HANDOUT)
{
rSet.Put(SfxBoolItem(SID_SLIDE_MASTERPAGE, false));
rSet.DisableItem(SID_TITLE_MASTERPAGE);
rSet.Put(SfxBoolItem(SID_NOTES_MASTERPAGE, false));
rSet.Put(SfxBoolItem(SID_HANDOUT_MASTERPAGE, true));
}
}
// set state of the ruler
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_RULER ) )
rSet.Put( SfxBoolItem( SID_RULER, HasRuler() ) );
// do not delete the last page or a master page
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_DELETE_PAGE )
|| SfxItemState::DEFAULT == rSet.GetItemState( SID_DELETE_MASTER_PAGE ) )
{
if (maTabControl->GetPageCount() == 1 ||
meEditMode == EM_MASTERPAGE ||
mePageKind == PK_NOTES ||
mePageKind == PK_HANDOUT ||
(GetShellType()!=ST_DRAW&&IsLayerModeActive()))
{
if (rSet.GetItemState(SID_DELETE_PAGE) == SfxItemState::DEFAULT)
rSet.DisableItem(SID_DELETE_PAGE);
if (rSet.GetItemState(SID_DELETE_MASTER_PAGE)==SfxItemState::DEFAULT)
rSet.DisableItem(SID_DELETE_MASTER_PAGE);
}
}
// is it allowed to delete the current layer?
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_DELETE_LAYER ) )
{
if(GetLayerTabControl()) // #i87182#
{
sal_uInt16 nCurrentLayer = GetLayerTabControl()->GetCurPageId();
const OUString& rName = GetLayerTabControl()->GetPageText(nCurrentLayer);
bool bDisableIt = !IsLayerModeActive();
bDisableIt |= (rName == SD_RESSTR(STR_LAYER_LAYOUT));
bDisableIt |= (rName == SD_RESSTR(STR_LAYER_BCKGRND));
bDisableIt |= (rName == SD_RESSTR(STR_LAYER_BCKGRNDOBJ));
bDisableIt |= (rName == SD_RESSTR(STR_LAYER_CONTROLS));
bDisableIt |= (rName == SD_RESSTR(STR_LAYER_MEASURELINES));
if (bDisableIt)
{
rSet.DisableItem(SID_DELETE_LAYER);
rSet.DisableItem(SID_RENAMELAYER);
}
}
else
{
OSL_ENSURE(false, "No LayerTabBar (!)");
}
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_CUT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_COPY ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_OUTLINE_BULLET ))
{
OutlinerView* pOlView = mpDrawView->GetTextEditOutlinerView();
// special treatment of for SID_OUTLINE_BULLET if objects with different
// kinds of NumBullets are marked
bool bHasOutliner = false;
bool bHasOther = false;
for(size_t nNum = 0; nNum < nMarkCount; ++nNum)
{
SdrObject* pObj = rMarkList.GetMark(nNum)->GetMarkedSdrObj();
if( pObj->GetObjInventor() == SdrInventor )
{
if( pObj->GetObjIdentifier() == OBJ_OUTLINETEXT )
{
bHasOutliner = true;
if(bHasOther)
break;
}
else
{
bHasOther = true;
if(bHasOutliner)
break;
}
}
}
if( bHasOther && bHasOutliner )
rSet.DisableItem( SID_OUTLINE_BULLET );
if (pOlView)
{
if (pOlView->GetSelected().isEmpty())
{
rSet.DisableItem( SID_CUT );
rSet.DisableItem( SID_COPY );
}
}
}
FuBullet::GetSlotState( rSet, this, GetViewFrame() );
if ( GetDocSh()->IsUIActive() )
{
rSet.DisableItem( SID_INSERT_OBJECT );
rSet.DisableItem( SID_INSERT_PLUGIN );
rSet.DisableItem( SID_INSERT_SOUND );
rSet.DisableItem( SID_INSERT_VIDEO );
rSet.DisableItem( SID_INSERT_FLOATINGFRAME );
rSet.DisableItem( SID_INSERT_MATH );
rSet.DisableItem( SID_INSERT_DIAGRAM );
rSet.DisableItem( SID_ATTR_TABLE );
rSet.DisableItem( SID_SIZE_REAL );
rSet.DisableItem( SID_SIZE_OPTIMAL );
rSet.DisableItem( SID_SIZE_ALL );
rSet.DisableItem( SID_SIZE_PAGE_WIDTH );
rSet.DisableItem( SID_SIZE_PAGE );
rSet.DisableItem( SID_DUPLICATE_PAGE );
rSet.DisableItem( SID_ZOOM_TOOLBOX );
}
// Zoom-State
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_ZOOM_IN ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_ZOOM_OUT )||
SfxItemState::DEFAULT == rSet.GetItemState( SID_ZOOM_PANNING ) )
{
if( GetActiveWindow()->GetZoom() <= GetActiveWindow()->GetMinZoom() || GetDocSh()->IsUIActive() )
{
rSet.DisableItem( SID_ZOOM_IN );
rSet.DisableItem( SID_ZOOM_PANNING );
}
if( GetActiveWindow()->GetZoom() >= GetActiveWindow()->GetMaxZoom() || GetDocSh()->IsUIActive() )
rSet.DisableItem( SID_ZOOM_OUT );
}
if (!mpZoomList->IsNextPossible())
{
rSet.DisableItem(SID_ZOOM_NEXT);
}
if (!mpZoomList->IsPreviousPossible())
{
rSet.DisableItem(SID_ZOOM_PREV);
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_REMOTE_DLG ) )
{
bool bDisableSdremoteForGood = false;
#ifndef ENABLE_SDREMOTE
bDisableSdremoteForGood = true;
#endif
uno::Reference< uno::XComponentContext > xContext = comphelper::getProcessComponentContext();
if ( xContext.is() )
bDisableSdremoteForGood |= ! ( /*officecfg::Office::Common::Misc::ExperimentalMode::get( xContext ) &&*/
officecfg::Office::Impress::Misc::Start::EnableSdremote::get( xContext ) );
// This dialog is only useful for TCP/IP remote control
// which is unusual, under-tested and a security issue.
if ( bDisableSdremoteForGood )
{
rSet.Put(SfxVisibilityItem(SID_REMOTE_DLG, false));
}
}
// EditText active
if (GetViewShellBase().GetViewShellManager()->GetShell(RID_DRAW_TEXT_TOOLBOX) != NULL)
{
sal_uInt16 nCurrentSId = SID_ATTR_CHAR;
if(HasCurrentFunction())
{
nCurrentSId = GetCurrentFunction()->GetSlotID();
}
if( nCurrentSId != SID_TEXT_FITTOSIZE &&
nCurrentSId != SID_TEXT_FITTOSIZE_VERTICAL &&
nCurrentSId != SID_ATTR_CHAR_VERTICAL )
nCurrentSId = SID_ATTR_CHAR;
rSet.Put( SfxBoolItem( nCurrentSId, true ) );
// Short version of UpdateToolboxImages()
rSet.Put( TbxImageItem( SID_DRAWTBX_TEXT, nCurrentSId ) );
}
if ( GetDocSh()->IsReadOnly() )
{
rSet.DisableItem( SID_AUTOSPELL_CHECK );
}
else
{
if (GetDoc()->GetOnlineSpell())
{
rSet.Put(SfxBoolItem(SID_AUTOSPELL_CHECK, true));
}
else
{
rSet.Put(SfxBoolItem(SID_AUTOSPELL_CHECK, false));
}
}
SdrPageView* pPV = mpDrawView->GetSdrPageView();
OUString aActiveLayer = mpDrawView->GetActiveLayer();
if ( ( !aActiveLayer.isEmpty() && pPV && ( pPV->IsLayerLocked(aActiveLayer) ||
!pPV->IsLayerVisible(aActiveLayer) ) ) ||
SD_MOD()->GetWaterCan() )
{
rSet.DisableItem( SID_PASTE );
rSet.DisableItem( SID_PASTE_SPECIAL );
rSet.DisableItem( SID_PASTE_UNFORMATTED );
rSet.DisableItem( SID_CLIPBOARD_FORMAT_ITEMS );
rSet.DisableItem( SID_INSERT_FLD_DATE_FIX );
rSet.DisableItem( SID_INSERT_FLD_DATE_VAR );
rSet.DisableItem( SID_INSERT_FLD_TIME_FIX );
rSet.DisableItem( SID_INSERT_FLD_TIME_VAR );
rSet.DisableItem( SID_INSERT_FLD_AUTHOR );
rSet.DisableItem( SID_INSERT_FLD_PAGE );
rSet.DisableItem( SID_INSERT_FLD_PAGE_TITLE );
rSet.DisableItem( SID_INSERT_FLD_PAGES );
rSet.DisableItem( SID_INSERT_FLD_FILE );
rSet.DisableItem( SID_INSERT_GRAPHIC );
rSet.DisableItem( SID_INSERT_AVMEDIA );
rSet.DisableItem( SID_INSERT_DIAGRAM );
rSet.DisableItem( SID_INSERT_OBJECT );
rSet.DisableItem( SID_INSERT_PLUGIN );
rSet.DisableItem( SID_INSERT_SOUND );
rSet.DisableItem( SID_INSERT_VIDEO );
rSet.DisableItem( SID_INSERT_FLOATINGFRAME );
rSet.DisableItem( SID_INSERT_MATH );
rSet.DisableItem( SID_INSERT_FRAME );
rSet.DisableItem( SID_INSERTFILE );
rSet.DisableItem( SID_ATTR_TABLE );
rSet.DisableItem( SID_COPYOBJECTS );
rSet.DisableItem( SID_SCAN );
rSet.DisableItem( SID_TWAIN_SELECT );
rSet.DisableItem( SID_TWAIN_TRANSFER );
// rSet.DisableItem( SID_BEZIER_EDIT );
rSet.DisableItem( SID_GLUE_EDITMODE );
rSet.DisableItem( SID_OBJECT_ROTATE );
rSet.DisableItem( SID_OBJECT_SHEAR );
rSet.DisableItem( SID_OBJECT_MIRROR );
rSet.DisableItem( SID_OBJECT_CROP );
rSet.DisableItem( SID_ATTR_GRAF_CROP );
rSet.DisableItem( SID_OBJECT_TRANSPARENCE );
rSet.DisableItem( SID_OBJECT_GRADIENT );
rSet.DisableItem( SID_OBJECT_CROOK_ROTATE );
rSet.DisableItem( SID_OBJECT_CROOK_SLANT );
rSet.DisableItem( SID_OBJECT_CROOK_STRETCH );
// Disable all object-creating tools
rSet.ClearItem( SID_ATTR_CHAR );
rSet.DisableItem( SID_ATTR_CHAR );
rSet.ClearItem( SID_ATTR_CHAR_VERTICAL );
rSet.DisableItem( SID_ATTR_CHAR_VERTICAL );
rSet.ClearItem(SID_DRAW_LINE);
rSet.DisableItem(SID_DRAW_LINE);
rSet.ClearItem(SID_DRAW_MEASURELINE);
rSet.DisableItem(SID_DRAW_MEASURELINE);
rSet.ClearItem(SID_DRAW_XLINE);
rSet.DisableItem(SID_DRAW_XLINE);
rSet.ClearItem( SID_LINE_ARROW_START );
rSet.DisableItem( SID_LINE_ARROW_START );
rSet.ClearItem( SID_LINE_ARROW_END );
rSet.DisableItem( SID_LINE_ARROW_END );
rSet.ClearItem( SID_LINE_ARROWS );
rSet.DisableItem( SID_LINE_ARROWS );
rSet.ClearItem( SID_LINE_ARROW_CIRCLE );
rSet.DisableItem( SID_LINE_ARROW_CIRCLE );
rSet.ClearItem( SID_LINE_CIRCLE_ARROW );
rSet.DisableItem( SID_LINE_CIRCLE_ARROW );
rSet.ClearItem( SID_LINE_ARROW_SQUARE );
rSet.DisableItem( SID_LINE_ARROW_SQUARE );
rSet.ClearItem( SID_LINE_SQUARE_ARROW );
rSet.DisableItem( SID_LINE_SQUARE_ARROW );
rSet.ClearItem(SID_DRAW_RECT);
rSet.DisableItem(SID_DRAW_RECT);
rSet.ClearItem(SID_DRAW_RECT_NOFILL);
rSet.DisableItem(SID_DRAW_RECT_NOFILL);
rSet.ClearItem(SID_DRAW_RECT_ROUND);
rSet.DisableItem(SID_DRAW_RECT_ROUND);
rSet.ClearItem(SID_DRAW_RECT_ROUND_NOFILL);
rSet.DisableItem(SID_DRAW_RECT_ROUND_NOFILL);
rSet.ClearItem(SID_DRAW_SQUARE);
rSet.DisableItem(SID_DRAW_SQUARE);
rSet.ClearItem(SID_DRAW_SQUARE_NOFILL);
rSet.DisableItem(SID_DRAW_SQUARE_NOFILL);
rSet.ClearItem(SID_DRAW_SQUARE_ROUND);
rSet.DisableItem(SID_DRAW_SQUARE_ROUND);
rSet.ClearItem(SID_DRAW_SQUARE_ROUND_NOFILL);
rSet.DisableItem(SID_DRAW_SQUARE_ROUND_NOFILL);
rSet.ClearItem(SID_DRAW_ELLIPSE);
rSet.DisableItem(SID_DRAW_ELLIPSE);
rSet.ClearItem(SID_DRAW_ELLIPSE_NOFILL);
rSet.DisableItem(SID_DRAW_ELLIPSE_NOFILL);
rSet.ClearItem(SID_DRAW_CIRCLE);
rSet.DisableItem(SID_DRAW_CIRCLE);
rSet.ClearItem(SID_DRAW_CIRCLE_NOFILL);
rSet.DisableItem(SID_DRAW_CIRCLE_NOFILL);
rSet.ClearItem(SID_DRAW_CAPTION);
rSet.DisableItem(SID_DRAW_CAPTION);
rSet.ClearItem(SID_DRAW_FONTWORK);
rSet.DisableItem(SID_DRAW_FONTWORK);
rSet.ClearItem(SID_DRAW_FONTWORK_VERTICAL);
rSet.DisableItem(SID_DRAW_FONTWORK_VERTICAL);
rSet.ClearItem(SID_DRAW_CAPTION_VERTICAL);
rSet.DisableItem(SID_DRAW_CAPTION_VERTICAL);
rSet.ClearItem(SID_TEXT_FITTOSIZE);
rSet.DisableItem(SID_TEXT_FITTOSIZE);
rSet.ClearItem(SID_TEXT_FITTOSIZE_VERTICAL);
rSet.DisableItem(SID_TEXT_FITTOSIZE_VERTICAL);
rSet.ClearItem(SID_TOOL_CONNECTOR);
rSet.DisableItem(SID_TOOL_CONNECTOR);
rSet.ClearItem(SID_CONNECTOR_ARROW_START);
rSet.DisableItem(SID_CONNECTOR_ARROW_START);
rSet.ClearItem(SID_CONNECTOR_ARROW_END);
rSet.DisableItem(SID_CONNECTOR_ARROW_END);
rSet.ClearItem(SID_CONNECTOR_ARROWS);
rSet.DisableItem(SID_CONNECTOR_ARROWS);
rSet.ClearItem(SID_CONNECTOR_CIRCLE_START);
rSet.DisableItem(SID_CONNECTOR_CIRCLE_START);
rSet.ClearItem(SID_CONNECTOR_CIRCLE_END);
rSet.DisableItem(SID_CONNECTOR_CIRCLE_END);
rSet.ClearItem(SID_CONNECTOR_CIRCLES);
rSet.DisableItem(SID_CONNECTOR_CIRCLES);
rSet.ClearItem(SID_CONNECTOR_LINE);
rSet.DisableItem(SID_CONNECTOR_LINE);
rSet.ClearItem(SID_CONNECTOR_LINE_ARROW_START);
rSet.DisableItem(SID_CONNECTOR_LINE_ARROW_START);
rSet.ClearItem(SID_CONNECTOR_LINE_ARROW_END);
rSet.DisableItem(SID_CONNECTOR_LINE_ARROW_END);
rSet.ClearItem(SID_CONNECTOR_LINE_ARROWS);
rSet.DisableItem(SID_CONNECTOR_LINE_ARROWS);
rSet.ClearItem(SID_CONNECTOR_LINE_CIRCLE_START);
rSet.DisableItem(SID_CONNECTOR_LINE_CIRCLE_START);
rSet.ClearItem(SID_CONNECTOR_LINE_CIRCLE_END);
rSet.DisableItem(SID_CONNECTOR_LINE_CIRCLE_END);
rSet.ClearItem(SID_CONNECTOR_LINE_CIRCLES);
rSet.DisableItem(SID_CONNECTOR_LINE_CIRCLES);
rSet.ClearItem(SID_CONNECTOR_CURVE);
rSet.DisableItem(SID_CONNECTOR_CURVE);
rSet.ClearItem(SID_CONNECTOR_CURVE_ARROW_START);
rSet.DisableItem(SID_CONNECTOR_CURVE_ARROW_START);
rSet.ClearItem(SID_CONNECTOR_CURVE_ARROW_END);
rSet.DisableItem(SID_CONNECTOR_CURVE_ARROW_END);
rSet.ClearItem(SID_CONNECTOR_CURVE_ARROWS);
rSet.DisableItem(SID_CONNECTOR_CURVE_ARROWS);
rSet.ClearItem(SID_CONNECTOR_CURVE_CIRCLE_START);
rSet.DisableItem(SID_CONNECTOR_CURVE_CIRCLE_START);
rSet.ClearItem(SID_CONNECTOR_CURVE_CIRCLE_END);
rSet.DisableItem(SID_CONNECTOR_CURVE_CIRCLE_END);
rSet.ClearItem(SID_CONNECTOR_CURVE_CIRCLES);
rSet.DisableItem(SID_CONNECTOR_CURVE_CIRCLES);
rSet.ClearItem(SID_CONNECTOR_LINES);
rSet.DisableItem(SID_CONNECTOR_LINES);
rSet.ClearItem(SID_CONNECTOR_LINES_ARROW_START);
rSet.DisableItem(SID_CONNECTOR_LINES_ARROW_START);
rSet.ClearItem(SID_CONNECTOR_LINES_ARROW_END);
rSet.DisableItem(SID_CONNECTOR_LINES_ARROW_END);
rSet.ClearItem(SID_CONNECTOR_LINES_ARROWS);
rSet.DisableItem(SID_CONNECTOR_LINES_ARROWS);
rSet.ClearItem(SID_CONNECTOR_LINES_CIRCLE_START);
rSet.DisableItem(SID_CONNECTOR_LINES_CIRCLE_START);
rSet.ClearItem(SID_CONNECTOR_LINES_CIRCLE_END);
rSet.DisableItem(SID_CONNECTOR_LINES_CIRCLE_END);
rSet.ClearItem(SID_CONNECTOR_LINES_CIRCLES);
rSet.DisableItem(SID_CONNECTOR_LINES_CIRCLES);
rSet.ClearItem(SID_DRAW_ARC);
rSet.DisableItem(SID_DRAW_ARC);
rSet.ClearItem(SID_DRAW_CIRCLEARC);
rSet.DisableItem(SID_DRAW_CIRCLEARC);
rSet.ClearItem(SID_DRAW_PIE);
rSet.DisableItem(SID_DRAW_PIE);
rSet.ClearItem(SID_DRAW_PIE_NOFILL);
rSet.DisableItem(SID_DRAW_PIE_NOFILL);
rSet.ClearItem(SID_DRAW_CIRCLEPIE);
rSet.DisableItem(SID_DRAW_CIRCLEPIE);
rSet.ClearItem(SID_DRAW_CIRCLEPIE_NOFILL);
rSet.DisableItem(SID_DRAW_CIRCLEPIE_NOFILL);
rSet.ClearItem(SID_DRAW_ELLIPSECUT);
rSet.DisableItem(SID_DRAW_ELLIPSECUT);
rSet.ClearItem(SID_DRAW_ELLIPSECUT_NOFILL);
rSet.DisableItem(SID_DRAW_ELLIPSECUT_NOFILL);
rSet.ClearItem(SID_DRAW_CIRCLECUT);
rSet.DisableItem(SID_DRAW_CIRCLECUT);
rSet.ClearItem(SID_DRAW_CIRCLECUT_NOFILL);
rSet.DisableItem(SID_DRAW_CIRCLECUT_NOFILL);
rSet.ClearItem(SID_DRAW_POLYGON);
rSet.DisableItem(SID_DRAW_POLYGON);
rSet.ClearItem(SID_DRAW_POLYGON_NOFILL);
rSet.DisableItem(SID_DRAW_POLYGON_NOFILL);
rSet.ClearItem(SID_DRAW_FREELINE);
rSet.DisableItem(SID_DRAW_FREELINE);
rSet.ClearItem(SID_DRAW_FREELINE_NOFILL);
rSet.DisableItem(SID_DRAW_FREELINE_NOFILL);
rSet.ClearItem(SID_DRAW_XPOLYGON);
rSet.DisableItem(SID_DRAW_XPOLYGON);
rSet.ClearItem(SID_DRAW_XPOLYGON_NOFILL);
rSet.DisableItem(SID_DRAW_XPOLYGON_NOFILL);
rSet.ClearItem(SID_DRAW_BEZIER_FILL);
rSet.DisableItem(SID_DRAW_BEZIER_FILL);
rSet.ClearItem(SID_DRAW_BEZIER_NOFILL);
rSet.DisableItem(SID_DRAW_BEZIER_NOFILL);
rSet.ClearItem(SID_3D_CUBE);
rSet.DisableItem(SID_3D_CUBE);
rSet.ClearItem(SID_3D_SHELL);
rSet.DisableItem(SID_3D_SHELL);
rSet.ClearItem(SID_3D_SPHERE);
rSet.DisableItem(SID_3D_SPHERE);
rSet.ClearItem(SID_3D_HALF_SPHERE);
rSet.DisableItem(SID_3D_HALF_SPHERE);
rSet.ClearItem(SID_3D_CYLINDER);
rSet.DisableItem(SID_3D_CYLINDER);
rSet.ClearItem(SID_3D_CONE);
rSet.DisableItem(SID_3D_CONE);
rSet.ClearItem(SID_3D_TORUS);
rSet.DisableItem(SID_3D_TORUS);
rSet.ClearItem(SID_3D_PYRAMID);
rSet.DisableItem(SID_3D_PYRAMID);
}
// are the modules available?
if (!SvtModuleOptions().IsCalc())
{
// remove menu entry if module is not available
rSet.Put( SfxVisibilityItem( SID_ATTR_TABLE, false ) );
}
if (!SvtModuleOptions().IsChart())
{
rSet.DisableItem( SID_INSERT_DIAGRAM );
}
if (!SvtModuleOptions().IsMath())
{
rSet.DisableItem( SID_INSERT_MATH );
}
rtl::Reference< sd::SlideShow > xSlideshow( SlideShow::GetSlideShow( GetViewShellBase() ) );
if( (xSlideshow.is() && xSlideshow->isRunning() && (xSlideshow->getAnimationMode() != ANIMATIONMODE_PREVIEW) ) || GetDocSh()->IsPreview() )
{
// Own Slots
rSet.DisableItem( SID_PRESENTATION );
rSet.DisableItem( SID_ZOOM_IN );
rSet.DisableItem( SID_ZOOM_OUT );
rSet.DisableItem( SID_ZOOM_PANNING );
rSet.DisableItem( SID_ZOOM_MODE );
rSet.DisableItem( SID_ZOOM_NEXT );
rSet.DisableItem( SID_ZOOM_PREV );
rSet.DisableItem( SID_SIZE_REAL );
rSet.DisableItem( SID_SIZE_OPTIMAL );
rSet.DisableItem( SID_SIZE_ALL );
rSet.DisableItem( SID_SIZE_PAGE_WIDTH );
rSet.DisableItem( SID_SIZE_PAGE );
rSet.DisableItem( SID_INSERTPAGE );
rSet.DisableItem( SID_DUPLICATE_PAGE );
rSet.DisableItem( SID_MODIFYPAGE );
rSet.DisableItem( SID_RENAMEPAGE );
rSet.DisableItem( SID_RENAMEPAGE_QUICK );
rSet.DisableItem( SID_DELETE_PAGE );
rSet.DisableItem( SID_PAGESETUP );
if( xSlideshow.is() && xSlideshow->isRunning() )
{
rSet.ClearItem(SID_OBJECT_ALIGN);
rSet.ClearItem(SID_ZOOM_TOOLBOX);
rSet.ClearItem(SID_OBJECT_CHOOSE_MODE);
rSet.ClearItem(SID_DRAWTBX_TEXT);
rSet.ClearItem(SID_DRAWTBX_RECTANGLES);
rSet.ClearItem(SID_DRAWTBX_ELLIPSES);
rSet.ClearItem(SID_DRAWTBX_LINES);
rSet.ClearItem(SID_DRAWTBX_ARROWS);
rSet.ClearItem(SID_DRAWTBX_3D_OBJECTS);
rSet.ClearItem(SID_DRAWTBX_CONNECTORS);
rSet.ClearItem(SID_OBJECT_CHOOSE_MODE );
rSet.ClearItem(SID_DRAWTBX_INSERT);
rSet.ClearItem(SID_INSERTFILE);
rSet.ClearItem(SID_OBJECT_ROTATE);
rSet.ClearItem(SID_OBJECT_ALIGN);
rSet.ClearItem(SID_POSITION);
rSet.ClearItem(SID_FM_CONFIG);
rSet.ClearItem(SID_ANIMATION_EFFECTS);
rSet.ClearItem(SID_ANIMATION_OBJECTS);
rSet.ClearItem(SID_3D_WIN);
rSet.DisableItem(SID_OBJECT_ALIGN);
rSet.DisableItem(SID_ZOOM_TOOLBOX);
rSet.DisableItem(SID_OBJECT_CHOOSE_MODE);
rSet.DisableItem(SID_DRAWTBX_TEXT);
rSet.DisableItem(SID_DRAWTBX_RECTANGLES);
rSet.DisableItem(SID_DRAWTBX_ELLIPSES);
rSet.DisableItem(SID_DRAWTBX_LINES);
rSet.DisableItem(SID_DRAWTBX_ARROWS);
rSet.DisableItem(SID_DRAWTBX_3D_OBJECTS);
rSet.DisableItem(SID_DRAWTBX_CONNECTORS);
rSet.DisableItem(SID_OBJECT_CHOOSE_MODE );
rSet.DisableItem(SID_DRAWTBX_INSERT);
rSet.DisableItem(SID_INSERTFILE);
rSet.DisableItem(SID_OBJECT_ROTATE);
rSet.DisableItem(SID_OBJECT_ALIGN);
rSet.DisableItem(SID_POSITION);
rSet.DisableItem(SID_FM_CONFIG);
rSet.DisableItem(SID_ANIMATION_EFFECTS);
rSet.DisableItem(SID_ANIMATION_OBJECTS);
rSet.DisableItem(SID_3D_WIN);
}
}
// Menuoption: Change->Convert->To Bitmap, Change->Convert->To Metafile
// disable, if there only Bitmap or Metafiles marked
// Menuoption: Format->Area, Format->Line
// disabled, if the marked objects not able to handle
// these attributes
bool bSingleGraphicSelected = false;
if (!mpDrawView->AreObjectsMarked())
{
rSet.DisableItem (SID_CONVERT_TO_METAFILE);
rSet.DisableItem (SID_CONVERT_TO_BITMAP);
}
else
{
// get marklist
SdrMarkList aMarkList = mpDrawView->GetMarkedObjectList();
bool bFoundBitmap = false;
bool bFoundMetafile = false;
bool bFoundObjNoArea = false;
bool bFoundNoGraphicObj = false;
bool bFoundAny = false;
bool bFoundTable = false;
// const size_t nMarkCount = aMarkList.GetMarkCount();
for (size_t i=0; i < nMarkCount && !bFoundAny; ++i)
{
SdrObject* pObj= aMarkList.GetMark(i)->GetMarkedSdrObj();
sal_uInt16 nId = pObj->GetObjIdentifier();
sal_uInt32 nInv = pObj->GetObjInventor();
if(nInv == SdrInventor)
{
// 2D objects
switch( nId )
{
case OBJ_PATHLINE :
case OBJ_PLIN :
case OBJ_LINE:
case OBJ_FREELINE :
case OBJ_EDGE:
case OBJ_CARC :
bFoundObjNoArea = true;
bFoundNoGraphicObj = true;
break;
case OBJ_OLE2 :
// #i118485# #i118525# Allow Line, Area and Graphic (Metafile, Bitmap)
bSingleGraphicSelected = nMarkCount == 1;
bFoundBitmap = true;
bFoundMetafile = true;
break;
case OBJ_GRAF :
{
bSingleGraphicSelected = nMarkCount == 1;
const SdrGrafObj* pSdrGrafObj = static_cast< const SdrGrafObj* >(pObj);
switch(pSdrGrafObj->GetGraphicType())
{
case GRAPHIC_BITMAP :
bFoundBitmap = true;
if(pSdrGrafObj->isEmbeddedSvg())
{
bFoundMetafile = true;
}
break;
case GRAPHIC_GDIMETAFILE :
bFoundMetafile = true;
break;
default:
break;
}
break;
}
case OBJ_TABLE:
bFoundTable = true;
break;
default :
bFoundAny = true;
}
}
else if(nInv == E3dInventor)
{
// 3D objects
bFoundAny = true;
}
}
if( bFoundTable )
rSet.DisableItem( SID_ATTRIBUTES_LINE );
if (!bFoundAny)
{
// Disable menuitem for area-dialog
if( bFoundObjNoArea ) // #i25616#
rSet.DisableItem( SID_ATTRIBUTES_AREA );
if( bFoundBitmap && !bFoundMetafile && !bFoundNoGraphicObj ) // only Bitmaps marked
rSet.DisableItem( SID_CONVERT_TO_BITMAP );
else if( !bFoundBitmap && bFoundMetafile && !bFoundNoGraphicObj ) // only Metafiles marked
rSet.DisableItem( SID_CONVERT_TO_METAFILE );
else if( !bFoundBitmap && !bFoundMetafile && !bFoundNoGraphicObj ) // nothing to do
{
rSet.DisableItem( SID_CONVERT_TO_BITMAP );
rSet.DisableItem( SID_CONVERT_TO_METAFILE );
}
}
}
if( !bSingleGraphicSelected )
{
rSet.DisableItem (SID_OBJECT_CROP);
rSet.DisableItem (SID_ATTR_GRAF_CROP);
}
// Menuoption: Edit->Hyperlink
// Disable, if there is no hyperlink
bool bDisableEditHyperlink = true;
if( mpDrawView->AreObjectsMarked() && ( mpDrawView->GetMarkedObjectList().GetMarkCount() == 1 ) )
{
if( mpDrawView->IsTextEdit() )
{
OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
if (pOLV)
{
const SvxFieldItem* pFieldItem = pOLV->GetFieldAtSelection();
if (pFieldItem)
{
ESelection aSel = pOLV->GetSelection();
if ( abs( aSel.nEndPos - aSel.nStartPos ) == 1 )
{
const SvxFieldData* pField = pFieldItem->GetField();
if ( pField->ISA(SvxURLField) )
bDisableEditHyperlink = false;
}
}
}
}
else
{
SdrUnoObj* pUnoCtrl = PTR_CAST(SdrUnoObj, mpDrawView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj());
if ( pUnoCtrl && FmFormInventor == pUnoCtrl->GetObjInventor() )
{
uno::Reference< awt::XControlModel > xControlModel( pUnoCtrl->GetUnoControlModel() );
if( xControlModel.is() )
{
uno::Reference< beans::XPropertySet > xPropSet( xControlModel, uno::UNO_QUERY );
if( xPropSet.is() )
{
uno::Reference< beans::XPropertySetInfo > xPropInfo( xPropSet->getPropertySetInfo() );
if( xPropInfo.is() && xPropInfo->hasPropertyByName( "TargetURL") )
{
bDisableEditHyperlink = false;
}
}
}
}
}
}
//highlight selected custom shape
{
sal_uInt16 nCurrentSId = 0;
if(HasCurrentFunction())
nCurrentSId = GetCurrentFunction()->GetSlotID();
if ( SfxItemState::DEFAULT == rSet.GetItemState( SID_DRAWTBX_CS_BASIC ) )
rSet.Put(SfxBoolItem(SID_DRAWTBX_CS_BASIC, SID_DRAWTBX_CS_BASIC == nCurrentSId ));
if ( SfxItemState::DEFAULT == rSet.GetItemState( SID_DRAWTBX_CS_SYMBOL ) )
rSet.Put(SfxBoolItem(SID_DRAWTBX_CS_SYMBOL, SID_DRAWTBX_CS_SYMBOL == nCurrentSId ));
if ( SfxItemState::DEFAULT == rSet.GetItemState( SID_DRAWTBX_CS_ARROW ) )
rSet.Put(SfxBoolItem(SID_DRAWTBX_CS_ARROW, SID_DRAWTBX_CS_ARROW == nCurrentSId ));
if ( SfxItemState::DEFAULT == rSet.GetItemState( SID_DRAWTBX_CS_FLOWCHART ) )
rSet.Put(SfxBoolItem(SID_DRAWTBX_CS_FLOWCHART, SID_DRAWTBX_CS_FLOWCHART == nCurrentSId ));
if ( SfxItemState::DEFAULT == rSet.GetItemState( SID_DRAWTBX_CS_CALLOUT ) )
rSet.Put(SfxBoolItem(SID_DRAWTBX_CS_CALLOUT,SID_DRAWTBX_CS_CALLOUT == nCurrentSId ));
if ( SfxItemState::DEFAULT == rSet.GetItemState( SID_DRAWTBX_CS_STAR ) )
rSet.Put(SfxBoolItem(SID_DRAWTBX_CS_STAR, SID_DRAWTBX_CS_STAR == nCurrentSId ));
}
if ( bDisableEditHyperlink || GetDocSh()->IsReadOnly() )
rSet.DisableItem( SID_EDIT_HYPERLINK );
if ( bDisableEditHyperlink )
rSet.DisableItem( SID_OPEN_HYPERLINK );
//fdo#78151 enable show next level/hide last level if editing a master page
//PRESOBJ_OUTLINE object and the current selection allow that to happen
{
bool bDisableShowNextLevel = true;
bool bDisableHideLastLevel = true;
ESelection aSel;
::Outliner* pOL = GetOutlinerForMasterPageOutlineTextObj(aSel);
if (pOL)
{
//and are on the last paragraph
aSel.Adjust();
if (aSel.nEndPara == pOL->GetParagraphCount() - 1)
{
sal_uInt16 nDepth = pOL->GetDepth(aSel.nEndPara);
if (nDepth != sal_uInt16(-1))
{
//there exists another numbering level that
//is currently hidden
if (nDepth < 8)
bDisableShowNextLevel = false;
//there exists a previous numbering level
if (nDepth > 0)
bDisableHideLastLevel = false;
}
}
}
if (bDisableShowNextLevel)
rSet.DisableItem(SID_SHOW_NEXT_LEVEL);
if (bDisableHideLastLevel)
rSet.DisableItem(SID_HIDE_LAST_LEVEL);
}
#if defined WNT || defined UNX
if( !mxScannerManager.is() )
{
rSet.DisableItem( SID_TWAIN_SELECT );
rSet.DisableItem( SID_TWAIN_TRANSFER );
}
#endif
// Set the state of two entries in the 'Slide' context sub-menu
// concerning the visibility of master page background and master page
// shapes.
if (rSet.GetItemState(SID_DISPLAY_MASTER_BACKGROUND) == SfxItemState::DEFAULT
|| rSet.GetItemState(SID_DISPLAY_MASTER_OBJECTS) == SfxItemState::DEFAULT)
{
SdPage* pPage = GetActualPage();
if (pPage != NULL
&& GetDoc() != NULL)
{
SetOfByte aVisibleLayers = pPage->TRG_GetMasterPageVisibleLayers();
SdrLayerAdmin& rLayerAdmin = GetDoc()->GetLayerAdmin();
sal_uInt8 aBackgroundId = rLayerAdmin.GetLayerID(SD_RESSTR(STR_LAYER_BCKGRND), false);
sal_uInt8 aObjectId = rLayerAdmin.GetLayerID(SD_RESSTR(STR_LAYER_BCKGRNDOBJ), false);
rSet.Put(SfxBoolItem(SID_DISPLAY_MASTER_BACKGROUND,
aVisibleLayers.IsSet(aBackgroundId)));
rSet.Put(SfxBoolItem(SID_DISPLAY_MASTER_OBJECTS,
aVisibleLayers.IsSet(aObjectId)));
}
}
#if !HAVE_FEATURE_GLTF
if (SfxItemState::DEFAULT == rSet.GetItemState(SID_INSERT_3DMODEL))
{
rSet.DisableItem(SID_INSERT_3DMODEL);
rSet.Put(SfxVisibilityItem(SID_INSERT_3DMODEL, false));
}
#endif
GetModeSwitchingMenuState (rSet);
}
void DrawViewShell::GetModeSwitchingMenuState (SfxItemSet &rSet)
{
//draview
rSet.Put(SfxBoolItem(SID_DIAMODE, false));
rSet.Put(SfxBoolItem(SID_OUTLINEMODE, false));
if (mePageKind == PK_NOTES)
{
rSet.Put(SfxBoolItem(SID_DRAWINGMODE, false));
rSet.Put(SfxBoolItem(SID_NOTESMODE, true));
rSet.Put(SfxBoolItem(SID_HANDOUTMODE, false));
}
else if (mePageKind == PK_HANDOUT)
{
rSet.Put(SfxBoolItem(SID_DRAWINGMODE, false));
rSet.Put(SfxBoolItem(SID_NOTESMODE, false));
rSet.Put(SfxBoolItem(SID_HANDOUTMODE, true));
}
else
{
rSet.Put(SfxBoolItem(SID_DRAWINGMODE, true));
rSet.Put(SfxBoolItem(SID_NOTESMODE, false));
rSet.Put(SfxBoolItem(SID_HANDOUTMODE, false));
}
// Removed [GetDocSh()->GetCurrentFunction() ||] from the following
// clause because the current function of the docshell can only be
// search and replace or spell checking and in that case switching the
// view mode is allowed.
const bool bIsRunning = SlideShow::IsRunning(GetViewShellBase());
if (GetViewFrame()->GetFrame().IsInPlace() || bIsRunning)
{
if ( !GetViewFrame()->GetFrame().IsInPlace() )
{
rSet.ClearItem( SID_DRAWINGMODE );
rSet.DisableItem( SID_DRAWINGMODE );
}
rSet.ClearItem( SID_NOTESMODE );
rSet.DisableItem( SID_NOTESMODE );
rSet.ClearItem( SID_HANDOUTMODE );
rSet.DisableItem( SID_HANDOUTMODE );
rSet.ClearItem( SID_OUTLINEMODE );
rSet.DisableItem( SID_OUTLINEMODE );
rSet.ClearItem( SID_DIAMODE );
rSet.DisableItem( SID_DIAMODE );
}
if (GetDocSh()->GetCreateMode() == SfxObjectCreateMode::EMBEDDED)
{
// Outplace-Edit: do not allow switch
rSet.ClearItem( SID_OUTLINEMODE );
rSet.DisableItem( SID_OUTLINEMODE );
rSet.ClearItem( SID_DIAMODE );
rSet.DisableItem( SID_DIAMODE );
rSet.ClearItem( SID_NOTESMODE );
rSet.DisableItem( SID_NOTESMODE );
rSet.ClearItem( SID_HANDOUTMODE );
rSet.DisableItem( SID_HANDOUTMODE );
}
svx::ExtrusionBar::getState( mpDrawView, rSet );
svx::FontworkBar::getState( mpDrawView, rSet );
}
void DrawViewShell::GetState (SfxItemSet& rSet)
{
// Iterate over all requested items in the set.
SfxWhichIter aIter( rSet );
sal_uInt16 nWhich = aIter.FirstWhich();
while (nWhich)
{
switch (nWhich)
{
case SID_SEARCH_ITEM:
case SID_SEARCH_OPTIONS:
// Forward this request to the common (old) code of the
// document shell.
GetDocSh()->GetState (rSet);
break;
default:
OSL_TRACE ("DrawViewShell::GetState(): can not handle which id %d", nWhich);
break;
}
nWhich = aIter.NextWhich();
}
}
void DrawViewShell::Execute (SfxRequest& rReq)
{
if(SlideShow::IsRunning(GetViewShellBase()))
{
// Do not execute anything during a native slide show.
return;
}
switch (rReq.GetSlot())
{
case SID_SEARCH_ITEM:
// Forward this request to the common (old) code of the
// document shell.
GetDocSh()->Execute (rReq);
break;
case SID_SPELL_DIALOG:
{
SfxViewFrame* pViewFrame = GetViewFrame();
if (rReq.GetArgs() != NULL)
pViewFrame->SetChildWindow (SID_SPELL_DIALOG,
static_cast<const SfxBoolItem&>(rReq.GetArgs()->
Get(SID_SPELL_DIALOG)).GetValue());
else
pViewFrame->ToggleChildWindow(SID_SPELL_DIALOG);
pViewFrame->GetBindings().Invalidate(SID_SPELL_DIALOG);
rReq.Ignore ();
}
break;
default:
OSL_TRACE ("DrawViewShell::Execute(): can not handle slot %d", rReq.GetSlot());
break;
}
}
} // end of namespace sd
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
Reference in New Issue View Git Blame Copy Permalink