mir/libreoffice
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
libreoffice/sd/source/ui/view/drviewsj.cxx
Noel Grandin beb8cfcf32 convert inventorId to scoped enum 
SW_DRAWLAYER had the same value as SC_DRAWLAYER, so I merged it into the
ScOrSwDraw enum constant

Change-Id: I5c45d378c00364d11cc960c9e48a6e3f10928724
Reviewed-on: https://gerrit.libreoffice.org/31037
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2016-11-21 12:09:09 +00:00

496 lines
20 KiB
C++
Raw Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include "DrawViewShell.hxx"
#include <com/sun/star/embed/EmbedMisc.hpp>
#include <svl/aeitem.hxx>
#include <svx/svxids.hrc>
#include <svx/globl3d.hxx>
#include <editeng/eeitem.hxx>
#include <editeng/flditem.hxx>
#include <svx/svdogrp.hxx>
#include <svx/svdograf.hxx>
#include <svx/svdoole2.hxx>
#include <svx/sxelditm.hxx>
#include <sfx2/dispatch.hxx>
#include <sfx2/request.hxx>
#include <svx/svdopath.hxx>
#include <svx/polysc3d.hxx>
#include <svx/obj3d.hxx>
#include <sfx2/event.hxx>
#include <sfx2/docfile.hxx>
#include <rtl/ustrbuf.hxx>
#include "app.hrc"
#include "Outliner.hxx"
#include "sdpage.hxx"
#include "fupoor.hxx"
#include "fusel.hxx"
#include "drawdoc.hxx"
#include "DrawDocShell.hxx"
#include "drawview.hxx"
#include "optsitem.hxx"
using namespace com::sun::star;
namespace sd {
/**
* Set state (Enabled/Disabled) of Menu-SfxSlots
*/
void DrawViewShell::GetMenuStateSel( SfxItemSet &rSet )
{
// Status of menu entries (Buttons,...)
// Single selection
const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
const size_t nMarkCount = rMarkList.GetMarkCount();
if ( nMarkCount == 1 )
{
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_BEZIER_EDIT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_UNGROUP ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_ENTER_GROUP ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_NAME_GROUP ) ||
// #i68101#
SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_TITLE_DESCRIPTION ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_ATTR_FILL_STYLE ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_ATTR_FILL_TRANSPARENCE ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_ATTR_FILL_FLOATTRANSPARENCE ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_CHANGEBEZIER ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_CHANGEPOLYGON ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_LINEEND_POLYGON ) ||
SfxItemState::DEFAULT == rSet.GetItemState( OBJ_TITLETEXT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( OBJ_OUTLINETEXT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_MEASURE_DLG ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_CONNECTION_DLG ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_CONNECTION_NEW_ROUTING ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_SHEAR ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_LEFT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_CENTER ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_RIGHT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_UP ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_MIDDLE ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_OBJECT_ALIGN_DOWN ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_FRAME_TO_TOP ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_MOREFRONT ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_MOREBACK ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_FRAME_TO_BOTTOM ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_BEFORE_OBJ ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_BEHIND_OBJ ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_REVERSE_ORDER ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_ORIGINAL_SIZE ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_SAVE_GRAPHIC ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_COMPRESS_GRAPHIC ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_TEXTATTR_DLG ) )
{
const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
const SdrGrafObj* pSdrGrafObj = dynamic_cast< const SdrGrafObj* >(pObj);
const SdrOle2Obj* pSdrOle2Obj = dynamic_cast< const SdrOle2Obj* >(pObj);
SdrInventor nInv = pObj->GetObjInventor();
sal_uInt16 nId = pObj->GetObjIdentifier();
SdrObjTransformInfoRec aInfoRec;
pObj->TakeObjInfo( aInfoRec );
// don't show original size entry if not possible
if(pSdrOle2Obj)
{
if (pSdrOle2Obj->GetObjRef().is() &&
((pSdrOle2Obj->GetObjRef()->getStatus( pSdrOle2Obj->GetAspect() ) & embed::EmbedMisc::MS_EMBED_RECOMPOSEONRESIZE) ) )
rSet.DisableItem(SID_ORIGINAL_SIZE);
}
if(!pSdrGrafObj)
{
rSet.DisableItem(SID_SAVE_GRAPHIC);
rSet.DisableItem(SID_COMPRESS_GRAPHIC);
}
/* If it is not a group object or 3D object, we disable "enter
group". */
if( !( ( dynamic_cast< const SdrObjGroup *>( pObj ) != nullptr && nInv == SdrInventor::Default ) ||
(dynamic_cast< const E3dPolyScene* >(pObj) != nullptr|| dynamic_cast< const E3dScene* >(pObj) != nullptr /*|| pObj->ISA (E3dCompoundObject) */) ) )
{
rSet.DisableItem( SID_ENTER_GROUP );
}
// If it is not a group object, we disable "ungroup"
if(!(dynamic_cast< const SdrObjGroup *>( pObj ) != nullptr && nInv == SdrInventor::Default))
{
rSet.DisableItem(SID_UNGROUP);
}
if( nInv == SdrInventor::Default &&
(nId == OBJ_LINE ||
nId == OBJ_PLIN ||
nId == OBJ_PATHLINE ||
nId == OBJ_FREELINE ))
{
//rSet.DisableItem( SID_ATTRIBUTES_AREA ); // remove again!
rSet.DisableItem( SID_ATTR_FILL_STYLE );
rSet.DisableItem( SID_ATTR_FILL_TRANSPARENCE );
rSet.DisableItem( SID_ATTR_FILL_FLOATTRANSPARENCE );
}
if( (dynamic_cast< const SdrPathObj *>( pObj ) == nullptr&& !aInfoRec.bCanConvToPath) || dynamic_cast< const SdrObjGroup *>( pObj ) != nullptr ) // As long as JOE handles it incorrectly!
{ // JOE: a group object may can be converted into a PathObj
rSet.DisableItem( SID_LINEEND_POLYGON );
}
if(nInv == SdrInventor::Default &&
(nId == OBJ_PATHFILL || nId == OBJ_PATHLINE || !aInfoRec.bCanConvToPath))
rSet.DisableItem( SID_CHANGEBEZIER );
if( nInv == SdrInventor::Default &&
( nId == OBJ_POLY || nId == OBJ_PLIN || !aInfoRec.bCanConvToPoly ) &&
!GetView()->IsVectorizeAllowed() )
{
rSet.DisableItem( SID_CHANGEPOLYGON );
}
if(nInv == SdrInventor::Default && nId == OBJ_TABLE )
{
rSet.DisableItem( SID_TEXTATTR_DLG );
}
if( nInv != SdrInventor::Default || nId != OBJ_MEASURE )
rSet.DisableItem( SID_MEASURE_DLG );
if( nInv != SdrInventor::Default || nId != OBJ_EDGE )
rSet.DisableItem( SID_CONNECTION_DLG );
else
{
bool bDisable = true;
SfxItemSet aAttrSet( GetDoc()->GetPool() );
GetView()->GetAttributes( aAttrSet );
if( aAttrSet.GetItemState( SDRATTR_EDGELINE1DELTA ) >= SfxItemState::DEFAULT &&
aAttrSet.GetItemState( SDRATTR_EDGELINE2DELTA ) >= SfxItemState::DEFAULT &&
aAttrSet.GetItemState( SDRATTR_EDGELINE3DELTA ) >= SfxItemState::DEFAULT )
{
long nVal1 = static_cast<const SdrMetricItem&>( aAttrSet.Get( SDRATTR_EDGELINE1DELTA ) ).GetValue();
long nVal2 = static_cast<const SdrMetricItem&>( aAttrSet.Get( SDRATTR_EDGELINE2DELTA ) ).GetValue();
long nVal3 = static_cast<const SdrMetricItem&>( aAttrSet.Get( SDRATTR_EDGELINE3DELTA ) ).GetValue();
{
if( nVal1 != 0 || nVal2 != 0 || nVal3 != 0 )
bDisable = false;
}
}
if( bDisable )
rSet.DisableItem( SID_CONNECTION_NEW_ROUTING );
}
if ( nInv == SdrInventor::E3d ||
(!mpDrawView->IsConvertToPathObjPossible() &&
!mpDrawView->IsShearAllowed() &&
!mpDrawView->IsDistortAllowed()) )
{
rSet.DisableItem( SID_OBJECT_SHEAR );
}
if(dynamic_cast< const E3dCompoundObject *>( pObj ) != nullptr)
{
rSet.DisableItem( SID_OBJECT_ALIGN );
rSet.DisableItem( SID_OBJECT_ALIGN_LEFT );
rSet.DisableItem( SID_OBJECT_ALIGN_CENTER );
rSet.DisableItem( SID_OBJECT_ALIGN_RIGHT );
rSet.DisableItem( SID_OBJECT_ALIGN_UP );
rSet.DisableItem( SID_OBJECT_ALIGN_MIDDLE );
rSet.DisableItem( SID_OBJECT_ALIGN_DOWN );
rSet.DisableItem( SID_FRAME_TO_TOP );
rSet.DisableItem( SID_MOREFRONT );
rSet.DisableItem( SID_MOREBACK );
rSet.DisableItem( SID_FRAME_TO_BOTTOM );
rSet.DisableItem( SID_BEFORE_OBJ );
rSet.DisableItem( SID_BEHIND_OBJ );
rSet.DisableItem( SID_REVERSE_ORDER );
rSet.DisableItem( SID_POSITION );
}
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_DISMANTLE ) ||
SfxItemState::DEFAULT == rSet.GetItemState( SID_BREAK ) )
{
if ( !mpDrawView->IsDismantlePossible() )
{
rSet.DisableItem( SID_DISMANTLE );
}
if ( !mpDrawView->IsDismantlePossible(true) &&
!mpDrawView->IsImportMtfPossible() &&
!mpDrawView->IsBreak3DObjPossible() )
{
rSet.DisableItem( SID_BREAK );
}
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_MODIFY_FIELD ) )
{
OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
if( pOLV )
{
const SvxFieldItem* pFldItem = pOLV->GetFieldAtSelection();
if( !( pFldItem && (nullptr != dynamic_cast< const SvxDateField *>( pFldItem->GetField() ) ||
nullptr != dynamic_cast< const SvxAuthorField *>( pFldItem->GetField() ) ||
nullptr != dynamic_cast< const SvxExtFileField *>( pFldItem->GetField() ) ||
nullptr != dynamic_cast< const SvxExtTimeField *>( pFldItem->GetField() ) ) ) )
{
rSet.DisableItem( SID_MODIFY_FIELD );
}
}
else
rSet.DisableItem( SID_MODIFY_FIELD );
}
if( SfxItemState::DEFAULT == rSet.GetItemState( SID_OUTLINE_TEXT_AUTOFIT ) )
{
const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
const bool bSet = static_cast<const SdrTextFitToSizeTypeItem*>(pObj->GetMergedItemSet().GetItem(SDRATTR_TEXT_FITTOSIZE))->GetValue() != SdrFitToSizeType::NONE;
rSet.Put(SfxBoolItem(SID_OUTLINE_TEXT_AUTOFIT, bSet));
}
rSet.DisableItem(SID_GROUP);
rSet.DisableItem(SID_COMBINE);
rSet.DisableItem(SID_DISTRIBUTE_DLG);
rSet.DisableItem(SID_POLY_MERGE);
rSet.DisableItem(SID_POLY_SUBSTRACT);
rSet.DisableItem(SID_POLY_INTERSECT);
rSet.DisableItem(SID_EQUALIZEWIDTH);
rSet.DisableItem(SID_EQUALIZEHEIGHT);
rSet.DisableItem(SID_CONNECT);
}
// multi-selection
else if( nMarkCount > 1 )
{
// distribute dialog for 3+n objects
if(nMarkCount <= 2)
rSet.DisableItem(SID_DISTRIBUTE_DLG);
rSet.DisableItem( SID_LINEEND_POLYGON );
rSet.DisableItem( SID_ENTER_GROUP );
// Now names for objects have to be unique
rSet.DisableItem( SID_NAME_GROUP );
// #i68101#
rSet.DisableItem( SID_OBJECT_TITLE_DESCRIPTION );
rSet.DisableItem( SID_MODIFY_FIELD );
{
bool bText = false;
bool bLine = false;
bool bGroup = false;
bool bDrawObj = false;
bool b3dObj = false;
bool bTable = false;
bool bMeasureObj = false;
bool bEdgeObj = false; // Connector
bool bE3dCompoundObject = false;
for( size_t i = 0; i < nMarkCount && !bText && i < 50; ++i )
{
SdrObject* pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
SdrInventor nInv = pObj->GetObjInventor();
sal_uInt16 nId = pObj->GetObjIdentifier();
if (nInv == SdrInventor::Default)
{
switch (nId)
{
case OBJ_TEXT: bText = true; break;
case OBJ_LINE: bLine = true; break;
case OBJ_EDGE: bEdgeObj = true; break;
case OBJ_MEASURE: bMeasureObj = true; break;
case OBJ_RECT:
case OBJ_CIRC:
case OBJ_FREELINE:
case OBJ_FREEFILL:
case OBJ_PATHFILL:
case OBJ_PATHLINE:
case OBJ_SECT:
case OBJ_CARC:
case OBJ_CCUT: bDrawObj = true; break;
case OBJ_GRUP: bGroup = true; break;
case OBJ_GRAF: break;
case OBJ_TABLE: bTable = true; break;
}
}
else if (nInv == SdrInventor::E3d)
{
if(dynamic_cast< const E3dScene *>( pObj ) != nullptr)
b3dObj = true;
else if(dynamic_cast< const E3dCompoundObject* >(pObj) != nullptr)
bE3dCompoundObject = true;
}
}
if( bLine && !bText && !bDrawObj &&!b3dObj)
{
rSet.DisableItem( SID_ATTR_FILL_STYLE );
rSet.DisableItem( SID_ATTR_FILL_TRANSPARENCE );
rSet.DisableItem( SID_ATTR_FILL_FLOATTRANSPARENCE );
}
if( !bEdgeObj )
rSet.DisableItem( SID_CONNECTION_DLG );
if (b3dObj)
{
rSet.DisableItem( SID_COMBINE );
rSet.DisableItem(SID_POLY_MERGE);
rSet.DisableItem(SID_POLY_SUBSTRACT);
rSet.DisableItem(SID_POLY_INTERSECT);
rSet.DisableItem(SID_EQUALIZEWIDTH);
rSet.DisableItem(SID_EQUALIZEHEIGHT);
}
if (b3dObj ||
(!mpDrawView->IsConvertToPathObjPossible() &&
!mpDrawView->IsShearAllowed() &&
!mpDrawView->IsDistortAllowed()) )
{
rSet.DisableItem( SID_OBJECT_SHEAR );
}
if( !bGroup )
{
rSet.DisableItem( SID_UNGROUP );
}
if( bTable )
rSet.DisableItem( SID_TEXTATTR_DLG );
if( !bMeasureObj )
rSet.DisableItem( SID_MEASURE_DLG );
if(bE3dCompoundObject)
{
rSet.DisableItem( SID_OBJECT_ALIGN );
rSet.DisableItem( SID_OBJECT_ALIGN_LEFT );
rSet.DisableItem( SID_OBJECT_ALIGN_CENTER );
rSet.DisableItem( SID_OBJECT_ALIGN_RIGHT );
rSet.DisableItem( SID_OBJECT_ALIGN_UP );
rSet.DisableItem( SID_OBJECT_ALIGN_MIDDLE );
rSet.DisableItem( SID_OBJECT_ALIGN_DOWN );
rSet.DisableItem( SID_FRAME_TO_TOP );
rSet.DisableItem( SID_MOREFRONT );
rSet.DisableItem( SID_MOREBACK );
rSet.DisableItem( SID_FRAME_TO_BOTTOM );
rSet.DisableItem( SID_BEFORE_OBJ );
rSet.DisableItem( SID_BEHIND_OBJ );
rSet.DisableItem( SID_REVERSE_ORDER );
rSet.DisableItem( SID_POSITION );
}
}
if ( !mpDrawView->IsDismantlePossible() )
{
rSet.DisableItem( SID_DISMANTLE );
}
if ( !mpDrawView->IsDismantlePossible(true) &&
!mpDrawView->IsImportMtfPossible() &&
!mpDrawView->IsBreak3DObjPossible() )
{
rSet.DisableItem( SID_BREAK );
}
if ( !mpDrawView->IsCombinePossible() )
{
rSet.DisableItem(SID_COMBINE);
rSet.DisableItem(SID_POLY_MERGE);
rSet.DisableItem(SID_POLY_SUBSTRACT);
rSet.DisableItem(SID_POLY_INTERSECT);
rSet.DisableItem(SID_EQUALIZEWIDTH);
rSet.DisableItem(SID_EQUALIZEHEIGHT);
}
if ( !mpDrawView->IsCombinePossible(true) )
{
rSet.DisableItem( SID_CONNECT );
}
if ( !mpDrawView->IsGroupPossible() )
{
rSet.DisableItem( SID_GROUP );
}
if ( !mpDrawView->IsUnGroupPossible() )
{
rSet.DisableItem( SID_UNGROUP );
}
}
// select no object
else
{
rSet.DisableItem( SID_ENTER_GROUP );
rSet.DisableItem( SID_CUT );
rSet.DisableItem( SID_COPY );
rSet.DisableItem( SID_DELETE );
rSet.DisableItem( SID_ATTR_TRANSFORM );
rSet.DisableItem( SID_OBJECT_ALIGN );
rSet.DisableItem( SID_OBJECT_ALIGN_LEFT );
rSet.DisableItem( SID_OBJECT_ALIGN_CENTER );
rSet.DisableItem( SID_OBJECT_ALIGN_RIGHT );
rSet.DisableItem( SID_OBJECT_ALIGN_UP );
rSet.DisableItem( SID_OBJECT_ALIGN_MIDDLE );
rSet.DisableItem( SID_OBJECT_ALIGN_DOWN );
rSet.DisableItem( SID_FRAME_TO_TOP );
rSet.DisableItem( SID_MOREFRONT );
rSet.DisableItem( SID_MOREBACK );
rSet.DisableItem( SID_FRAME_TO_BOTTOM );
rSet.DisableItem( SID_BEFORE_OBJ );
rSet.DisableItem( SID_BEHIND_OBJ );
rSet.DisableItem( SID_POSITION );
rSet.DisableItem( SID_SIZE_OPTIMAL );
rSet.DisableItem( SID_LINEEND_POLYGON );
rSet.DisableItem( SID_COPYOBJECTS );
rSet.DisableItem( SID_HORIZONTAL );
rSet.DisableItem( SID_VERTICAL );
rSet.DisableItem( SID_FLIP_HORIZONTAL );
rSet.DisableItem( SID_FLIP_VERTICAL );
rSet.DisableItem( SID_GROUP );
rSet.DisableItem( SID_UNGROUP );
rSet.DisableItem( SID_NAME_GROUP );
// #i68101#
rSet.DisableItem( SID_OBJECT_TITLE_DESCRIPTION );
rSet.DisableItem( SID_DISMANTLE );
rSet.DisableItem( SID_BREAK );
rSet.DisableItem( SID_COMBINE );
rSet.DisableItem(SID_DISTRIBUTE_DLG);
rSet.DisableItem(SID_POLY_MERGE);
rSet.DisableItem(SID_POLY_SUBSTRACT);
rSet.DisableItem(SID_POLY_INTERSECT);
rSet.DisableItem(SID_EQUALIZEWIDTH);
rSet.DisableItem(SID_EQUALIZEHEIGHT);
rSet.DisableItem( SID_CONNECT );
rSet.DisableItem( SID_ANIMATION_EFFECTS );
rSet.DisableItem( SID_MODIFY_FIELD );
rSet.DisableItem (SID_OBJECT_SHEAR);
}
}
} // end of namespace sd
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
Reference in New Issue View Git Blame Copy Permalink