libreoffice/basic/source/app/svtmsg.src

/*************************************************************************
 *
 *  $RCSfile: svtmsg.src,v $
 *
 *  $Revision: 1.68 $
 *
 *  last change: $Author: hr $ $Date: 2004-11-09 16:55:10 $
 *
 *  The Contents of this file are made available subject to the terms of
 *  either of the following licenses
 *
 *         - GNU Lesser General Public License Version 2.1
 *         - Sun Industry Standards Source License Version 1.1
 *
 *  Sun Microsystems Inc., October, 2000
 *
 *  GNU Lesser General Public License Version 2.1
 *  =============================================
 *  Copyright 2000 by Sun Microsystems, Inc.
 *  901 San Antonio Road, Palo Alto, CA 94303, USA
 *
 *  This library is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU Lesser General Public
 *  License version 2.1, as published by the Free Software Foundation.
 *
 *  This library is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *  Lesser General Public License for more details.
 *
 *  You should have received a copy of the GNU Lesser General Public
 *  License along with this library; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 *  MA  02111-1307  USA
 *
 *
 *  Sun Industry Standards Source License Version 1.1
 *  =================================================
 *  The contents of this file are subject to the Sun Industry Standards
 *  Source License Version 1.1 (the "License"); You may not use this file
 *  except in compliance with the License. You may obtain a copy of the
 *  License at http://www.openoffice.org/license.html.
 *
 *  Software provided under this License is provided on an "AS IS" basis,
 *  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
 *  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
 *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
 *  See the License for the specific provisions governing your rights and
 *  obligations concerning the Software.
 *
 *  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
 *
 *  Copyright: 2000 by Sun Microsystems, Inc.
 *
 *  All Rights Reserved.
 *
 *  Contributor(s): _______________________________________
 *
 *
 ************************************************************************/
#include <svtools/svtmsg.hrc>


// Hier sind die Messages aus dem Verzeichnis /basic/source/app enhalten


///////////////////////////////
// Fehlermeldungen, die in das Resultfile gelangen.
// *********************
// ***  !!ACHTUNG!!  ***
// *********************
// Die Nummern d<>rfen sich NIE! <20>ndern,
// da sie in den Resultfiles gespeichert sind, und bei erneutem Anzeigen
// statdessen die entsprechenden neuen oder garkeine Strings angzeigt werden.
///////////////////////////////
String S_GPF_ABORT
{
    Text [ de ] = "Programm abgebrochen mit GPF";
    Text[ en-US ] = "Program aborted with GPF";
};
String S_APP_SHUTDOWN
{
    Text [ de ] = "Applikation wurde Beendet";
    Text[ en-US ] = "Application has been shut down";
};
String S_SID_EXECUTE_FAILED_NO_DISPATCHER
{
    Text [ de ] = "Konnte Slot ID nicht ausf<73>hren: Kein ActiveDispatcher";
    Text[ en-US ] = "Slot ID cannot be executed. No ActiveDispatcher";
};
String S_SID_EXECUTE_FAILED
{
    Text [ de ] = "Konnte Slot ID nicht ausf<73>hren";
    Text[ en-US ] = "Slot ID could not be execute";
};
String S_UNO_PROPERTY_NITIALIZE_FAILED
{
    Text [ de ] = "UnoSlot: Konnte Properties nicht initialisieren.";
    Text[ en-US ] = "UnoSlot: Properties could not be initialized";
};
String S_RESETAPPLICATION_FAILED_COMPLEX
{
    Text [ de ] = "ResetApplication fehlgeschlagen: Zu komplex";
    Text[ en-US ] = "ResetApplication failed: too complex";
};
String S_RESETAPPLICATION_FAILED_UNKNOWN
{
    Text [ de ] = "ResetApplication fehlgeschlagen: Unbekannter Fenstertyp";
    Text[ en-US ] = "ResetApplication failed: unknown window type";
};
String S_NO_ACTIVE_WINDOW
{
    Text [ de ] = "Kein aktives Fenster gefunden (GetNextCloseWindow)";
    Text[ en-US ] = "No active window found (GetNextCloseWindow)";
};
String S_NO_DIALOG_IN_GETACTIVE
{
    Text [ de ] = "GetActive liefert keinen Dialog zur<75>ck! Bitte Entwicklung informieren";
    Text[ en-US ] = "GetActive does not return a dialog! Inform development";
};
String S_NO_POPUP
{
    Text [ de ] = "Kein PopupMenu ge<67>ffnet";
    Text[ en-US ] = "Pop-up menu not open";
};
String S_NO_SUBMENU
{
    Text [ de ] = "Untermen<65> nicht vorhanden";
    Text[ en-US ] = "Submenu does not exist";
};
String S_CONTROLTYPE_NOT_SUPPORTED
{
    Text [ de ] = "ControlType ($Arg1) wird nicht unterst<73>tzt";
    Text[ en-US ] = "ControlType ($Arg1) is not supported";
};
String S_SELECTION_BY_ATTRIBUTE_ONLY_DIRECTORIES
{
    Text [ de ] = "Selektion nach Attributen nur f<>r Directories m<>glich.";
    Text[ en-US ] = "Selection by attributes only possible for directories";
};
String S_NO_MORE_FILES
{
    Text [ de ] = "Keine weiteren Dateien";
    Text[ en-US ] = "No more files";
};
String S_UNKNOWN_METHOD
{
    Text [ de ] = "Unbekannte Methode '($Arg1)' an ($Arg2)";
    Text[ en-US ] = "Unknown method '($Arg1)' on ($Arg2)";
};
String S_INVALID_PARAMETERS
{
    Text [ de ] = "Ung<6E>ltige Parameter";
    Text[ en-US ] = "Invalid Parameters";
};
String S_POINTER_OUTSIDE_APPWIN
{
    Text [ de ] = "Pointer nicht innerhalb des Applikationsfensters bei '($Arg1)'";
    Text[ en-US ] = "Pointer not inside application window at '($Arg1)'";
};
String S_UNKNOWN_COMMAND
{
    Text [ de ] = "Unbekannter Befehl '($Arg1)'";
    Text[ en-US ] = "Unknown command '($Arg1)'";
};
String S_WIN_NOT_FOUND
{
    Text [ de ] = "Konnte ($Arg1) nicht finden.";
    Text[ en-US ] = "($Arg1) could not be found";
};
String S_WIN_INVISIBLE
{
    Text [ de ] = "($Arg1) ist unsichtbar.";
    Text[ en-US ] = "($Arg1) is not visible";
};
String S_WIN_DISABLED
{
    Text [ de ] = "Konnte auf ($Arg1) nicht zugreifen.";
    Text[ en-US ] = "($Arg1) could not be accessed.";
};
String S_NUMBER_TOO_BIG
{
    Text [ de ] = "Eintragsnummer ($Arg2) zu gro<72> in ($Arg1). Maximum ist ($Arg3)";
    Text[ en-US ] = "Entry number ($Arg2) is too large in ($Arg1). Max. allowed is ($Arg3)";
};
String S_NUMBER_TOO_SMALL
{
    Text [ de ] = "Eintragsnummer ($Arg2) zu klein in ($Arg1). Minimum ist ($Arg3)";
    Text[ en-US ] = "The entry number ($Arg2) is too small in ($Arg1). Min allowed is ($Arg3)";
};
String S_WINDOW_DISAPPEARED
{
    Text [ de ] = "Window zwischenzeitlich verschwunden bei ($Arg1)";
    Text[ en-US ] = "Window disappeared in the meantime at ($Arg1)";
};
String S_ERROR_SAVING_IMAGE
{
    Text [ de ] = "Fehler #($Arg1) beim Speichern des Bildes";
    Text[ en-US ] = "Error #($Arg1) when saving the image";
};
String S_INVALID_POSITION
{
    Text [ de ] = "Ung<6E>ltige Positionsangabe bei ($Arg1)";
    Text[ en-US ] = "Invalid positon at ($Arg1)";
};
String S_SPLITWIN_NOT_FOUND
{
    Text [ de ] = "Konnte SplitWindow nicht finden bei ($Arg1)";
    Text[ en-US ] = "SplitWindow not found at ($Arg1)";
};
String S_INTERNAL_ERROR
{
    Text [ de ] = "Interner Fehler bei ($Arg1)";
    Text[ en-US ] = "Internal error at ($Arg1)";
};
String S_NO_STATUSBAR
{
    Text [ de ] = "Keine StatusBar vorhanden bei ($Arg1)";
    Text[ en-US ] = "No status bar at ($Arg1)";
};
String S_ITEMS_INVISIBLE
{
    Text [ de ] = "Die Items sind ausgeblendet bei ($Arg1)";
    Text[ en-US ] = "The items are hidden at ($Arg1)";
};
String S_TABPAGE_NOT_FOUND
{
    Text [ de ] = "Tabpage nicht gefunden bei ($Arg1)";
    Text[ en-US ] = "Tab page not found at ($Arg1)";
};
String S_TRISTATE_NOT_ALLOWED
{
    Text [ de ] = "Tristate darf nicht gesetzt werden bei ($Arg1)";
    Text[ en-US ] = "Tristate cannot be set at ($Arg1)";
};
String S_ERROR_IN_SET_TEXT
{
    Text [ de ] = "SetText hat nicht funktioniert";
    Text[ en-US ] = "Set text did not function";
};
String S_ATTEMPT_TO_WRITE_READONLY
{
    Text [ de ] = "Schreibversuch auf ReadOnly ($Arg1)";
    Text[ en-US ] = "Attempt to write on read-only ($Arg1)";
};
String S_NO_SELECT_FALSE
{
    Text [ de ] = "Select FALSE nicht erlaubt. Bitte MultiSelect verwenden bei ($Arg1)";
    Text[ en-US ] = "Select FALSE not allowed. Use MultiSelect at ($Arg1)";
};
String S_ENTRY_NOT_FOUND
{
    Text [ de ] = "Eintrag \"($Arg2)\" bei ($Arg1) nicht gefunden";
    Text[ en-US ] = "\"($Arg2)\" entry at ($Arg1) not found";
};
String S_METHOD_FAILED
{
    Text [ de ] = "($Arg1) von Eintrag \"($Arg2)\" ist fehlgeschlagen";
    Text[ en-US ] = "($Arg1) of entry \"($Arg2)\" failed";
};
String S_HELPID_ON_TOOLBOX_NOT_FOUND
{
    Text [ de ] = "HelpID auf ToolBox nicht gefunden bei ($Arg1)";
    Text[ en-US ] = "HelpID in ToolBox not found at ($Arg1)";
};
String S_BUTTON_DISABLED_ON_TOOLBOX
{
    Text [ de ] = "Der Button ist disabled in ToolBox bei ($Arg1)";
    Text[ en-US ] = "The button is disabled in ToolBox at ($Arg1)";
};
String S_BUTTON_HIDDEN_ON_TOOLBOX
{
    Text [ de ] = "Der Button ist hidden in ToolBox bei ($Arg1)";
    Text[ en-US ] = "The button is hidden in ToolBox at ($Arg1)";
};
String S_CANNOT_MAKE_BUTTON_VISIBLE_IN_TOOLBOX
{
    Text [ de ] = "Button konnte nicht sichtbar gemacht werden in ToolBox bei ($Arg1)";
    Text[ en-US ] = "Button cannot be made visible in ToolBox at ($Arg1)";
};
String S_TEAROFF_FAILED
{
    Text [ de ] = "TearOff Fehlgeschlagen in ToolBox bei ($Arg1)";
    Text[ en-US ] = "TearOff failed in ToolBox at ($Arg1)";
};

// Has to stay in for old res files
String S_NO_SELECTED_ENTRY_DEPRECATED
{
    Text [ de ] = "Es ist kein Eintrag Selektiert in TreeListBox bei ($Arg1)";
    Text[ en-US ] = "No entry is selected in TreeListBox at ($Arg1)";
};
String S_NO_SELECTED_ENTRY
{
    Text [ de ] = "Es ist kein Eintrag Selektiert in ($Arg2) bei ($Arg1)";
    Text[ en-US ] = "Es ist kein Eintrag Selektiert in ($Arg2) bei ($Arg1)";
};
String S_SELECT_DESELECT_VIA_STRING_NOT_IMPLEMENTED
{
    Text [ de ] = "Select/Deselect mit String nicht implementiert bei ($Arg1)";
    Text[ en-US ] = "Select/Deselect with string not implemented at ($Arg1)";
};
String S_ALLOWED_ONLY_IN_FLOATING_MODE
{
    Text [ de ] = "Methode nur im Froating-Mode erlaubt bei ($Arg1)";
    Text[ en-US ] = "Method only allowed in floating mode at ($Arg1)";
};
String S_ALLOWED_ONLY_IN_DOCKING_MODE
{
    Text [ de ] = "Methode nur im Docking-Mode erlaubt bei ($Arg1)";
    Text[ en-US ] = "Method only allowed in docking mode at ($Arg1)";
};
String S_SIZE_NOT_CHANGEABLE
{
    Text [ de ] = "Gr<47><72>e ist nicht veränderbar bei ($Arg1)";
    Text[ en-US ] = "Size cannot be altered at ($Arg1)";
};
String S_NO_OK_BUTTON
{
    Text [ de ] = "Kein OK Button Vorhanden bei ($Arg1)";
    Text[ en-US ] = "There is no OK button at ($Arg1)";
};
String S_NO_CANCEL_BUTTON
{
    Text [ de ] = "Kein Abbrechen Button Vorhanden bei ($Arg1)";
    Text[ en-US ] = "There is no Cancel button at ($Arg1)";
};
String S_NO_YES_BUTTON
{
    Text [ de ] = "Kein Ja Button Vorhanden bei ($Arg1)";
    Text[ en-US ] = "There is no Yes button at ($Arg1)";
};
String S_NO_NO_BUTTON
{
    Text [ de ] = "Kein Nein Button Vorhanden bei ($Arg1)";
    Text[ en-US ] = "There is no No button at ($Arg1)";
};
String S_NO_RETRY_BUTTON
{
    Text [ de ] = "Kein Wiederholen Button Vorhanden bei ($Arg1)";
    Text[ en-US ] = "There is no Repeat button at ($Arg1)";
};
String S_NO_HELP_BUTTON
{
    Text [ de ] = "Kein Hilfe Button Vorhanden bei ($Arg1)";
    Text[ en-US ] = "There is no Help button at ($Arg1)";
};
String S_NO_DEFAULT_BUTTON
{
    Text [ de ] = "Kein Default Button Definiert bei ($Arg1)";
    Text[ en-US ] = "There is no Default button defined at ($Arg1)";
};
String S_BUTTON_ID_NOT_THERE
{
    Text [ de ] = "Kein Button mit der ID ($Arg1) Vorhanden bei ($Arg2)";
    Text[ en-US ] = "There is no button with ID ($Arg1) at ($Arg2)";
};
String S_BUTTONID_REQUIRED
{
    Text [ de ] = "Es muss eine ButtonId angegeben werden bei ($Arg1)";
    Text[ en-US ] = "A button ID needs to be given at ($Arg1)";
};
String S_UNKNOWN_TYPE
{
    Text [ de ] = "Unbekannter Objekttyp ($Arg1) aus UId oder Methode '($Arg2)' nicht unterst<73>tzt";
    Text[ en-US ] = "Unknown object type ($Arg1) from UId or method '($Arg2)' not supported";
};
String S_UNPACKING_STORAGE_FAILED
{
    Text [ de ] = "Entpacken der Storage \"($Arg1)\" nach \"($Arg2)\" ist fehlgeschlagen";
    Text[ en-US ] = "Unpacking storage \"($Arg1)\" to \"($Arg2)\" failed";
};
String S_NO_LIST_BOX_BUTTON
{
    Text [ de ] = "ListBoxButton nicht vorhanden bei ($Arg1)";
    Text[ en-US ] = "ListBoxButton does not exist in ($Arg1)";
};
String S_UNO_URL_EXECUTE_FAILED_NO_DISPATCHER
{
    Text [ de ] = "Konnte UNO Url \"($Arg1)\"nicht ausf<73>hren: Keinen Dispatcher gefunden";
    Text[ en-US ] = "UNO URL \"($Arg1)\" could not be executed: No dispatcher was found.";
};
String S_UNO_URL_EXECUTE_FAILED_NO_FRAME
{
    Text [ de ] = "Konnte UNO Url \"($Arg1)\"nicht ausf<73>hren: Kein ActiveFrame am Desktop";
    Text[ en-US ] = "UNO URL \"($Arg1)\" could not be executed: No ActiveFrame on desktop.";
};
String S_NO_MENU
{
    Text [ de ] = "Kein Men<65> Vorhanden bei ($Arg1)";
    Text[ en-US ] = "There is no menu at ($Arg1)";
};
String S_UNO_URL_EXECUTE_FAILED_DISABLED
{
    Text [ de ] = "Konnte UNO Url \"($Arg1)\"nicht ausf<73>hren: Disabled";
    Text[ en-US ] = "UNO URL \"($Arg1)\" could not be run: Disabled";
};
String S_NO_SCROLLBAR
{
    Text [ de ] = "Keine ScrollBar vorhanden bei ($Arg1)";
    Text[ en-US ] = "No scroll bar at ($Arg1)";
};
String S_NO_SAX_PARSER
{
    Text [ de ] = "Keine SAX Parser bei ($Arg1). Zuerst mit 'SAXReadFile' initialisieren.";
    Text[ en-US ] = "No SAX Parser when using ($Arg1). Initialize with 'SAXReadFile' first.";
};
String S_CANNOT_CREATE_DIRECTORY
{
    Text [ de ] = "";
    Text[ en-US ] = "Cannot create Directory: \"($Arg1)\"";
};
String S_DIRECTORY_NOT_EMPTY
{
    Text [ de ] = "";
    Text[ en-US ] = "Directory has to be Empty to unpack to. Directory: \"($Arg1)\"";
};
String S_DEPRECATED
{
    Text [ de ] = "";
    Text[ en-US ] = "Deprecated! Please change the script.";
};
String S_SIZE_BELOW_MINIMUM
{
    Text [ de ] = "";
    Text[ en-US ] = "The Size is below the minimum. x=($Arg1) ,y=($Arg2)";
};
String S_CANNOT_FIND_FLOATING_WIN
{
    Text [ de ] = "";
    Text[ en-US ] = "Cannot find FloatingWindow for Floating DockingWindow at ($Arg1).";
};