mir/libreoffice
2
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
b25fea2e3faef50e88ba49138e23e5c1b51fb22c
libreoffice/sfx2/source/doc/sfxbasemodel.cxx

1544 lines
60 KiB
C++
Raw Blame History

/*************************************************************************
*
* $RCSfile: sfxbasemodel.cxx,v $
*
* $Revision: 1.5 $
*
* last change: $Author: ganaya $ $Date: 2001-02-01 01:17:52 $
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
//________________________________________________________________________________________________________
// my own includes
//________________________________________________________________________________________________________
#ifndef _SFX_SFXBASEMODEL_HXX_
#include <sfxbasemodel.hxx>
#endif
//________________________________________________________________________________________________________
// include of other projects
//________________________________________________________________________________________________________
#ifndef _COM_SUN_STAR_VIEW_XSELECTIONSUPPLIER_HPP_
#include <com/sun/star/view/XSelectionSupplier.hpp>
#endif
#ifndef _COM_SUN_STAR_AWT_SIZE_HPP_
#include <com/sun/star/awt/Size.hpp>
#endif
#ifndef _COM_SUN_STAR_LANG_DISPOSEDEXCEPTION_HPP_
#include <com/sun/star/lang/DisposedException.hpp>
#endif
#ifndef _COM_SUN_STAR_LANG_ILLEGALARGUMENTEXCEPTION_HPP_
#include <com/sun/star/lang/IllegalArgumentException.hpp>
#endif
#ifndef _COM_SUN_STAR_VIEW_PAPERFORMAT_HPP_
#include <com/sun/star/view/PaperFormat.hpp>
#endif
#ifndef _COM_SUN_STAR_VIEW_PAPERORIENTATION_HPP_
#include <com/sun/star/view/PaperOrientation.hpp>
#endif
#ifndef _COM_SUN_STAR_VIEW_PAPERORIENTATION_HPP_
#include <com/sun/star/view/PaperOrientation.hpp>
#endif
#ifndef _CPPUHELPER_INTERFACECONTAINER_HXX_
#include <cppuhelper/interfacecontainer.hxx>
#endif
//ASDBG #ifndef _USR_SMARTCONV_HXX_
//ASDBG #include <usr/smartconv.hxx>
//ASDBG #endif
#ifndef _UNO_MAPPING_HXX_
#include <uno/mapping.hxx>
#endif
#ifndef _SFXITEMSET_HXX
#include <svtools/itemset.hxx>
#endif
#ifndef _SFXSTRITEM_HXX
#include <svtools/stritem.hxx>
#endif
#ifndef _SFXINTITEM_HXX
#include <svtools/intitem.hxx>
#endif
#ifndef _SFXENUMITEM_HXX
#include <svtools/eitem.hxx>
#endif
//________________________________________________________________________________________________________
// includes of my own project
//________________________________________________________________________________________________________
#ifndef _SFX_SFXUNO_HXX
#include <sfxuno.hxx>
#endif
#ifndef _SFX_OBJSHIMP_HXX
#include <objshimp.hxx>
#endif
#ifndef _SFXVIEWFRM_HXX
#include <viewfrm.hxx>
#endif
#ifndef _SFXVIEWSH_HXX
#include <viewsh.hxx>
#endif
#ifndef _SFXDOCFILE_HXX
#include <docfile.hxx>
#endif
#ifndef _SFXDISPATCH_HXX
#include <dispatch.hxx>
#endif
#ifndef _SFXREQUEST_HXX
#include <request.hxx>
#endif
#ifndef _SFX_OBJUNO_HXX
#include <objuno.hxx>
#endif
#ifndef _SFX_PRINTER_HXX
#include <printer.hxx>
#endif
#ifndef _SFX_BASMGR_HXX
#include <basmgr.hxx>
#endif
#include <vos/mutex.hxx>
#include "sfxsids.hrc"
//________________________________________________________________________________________________________
// defines
//________________________________________________________________________________________________________
#define SfxIOException_Impl( nErr ) ::com::sun::star::io::IOException()
#define XFRAME ::com::sun::star::frame::XFrame
#define XINTERFACE ::com::sun::star::uno::XInterface
#define OMULTITYPEINTERFACECONTAINERHELPER ::cppu::OMultiTypeInterfaceContainerHelper
#define UNO_QUERY ::com::sun::star::uno::UNO_QUERY
#define DISPOSEDEXCEPTION ::com::sun::star::lang::DisposedException
#define MAPPING ::com::sun::star::uno::Mapping
#define XSELECTIONSUPPLIER ::com::sun::star::view::XSelectionSupplier
#define ANY ::com::sun::star::uno::Any
#define ILLEGALARGUMENTEXCEPTION ::com::sun::star::lang::IllegalArgumentException
#define OINTERFACECONTAINERHELPER ::cppu::OInterfaceContainerHelper
#define OINTERFACEITERATORHELPER ::cppu::OInterfaceIteratorHelper
#define SIZE ::com::sun::star::awt::Size
#define PAPERFORMAT ::com::sun::star::view::PaperFormat
#define PAPERORIENTATION ::com::sun::star::view::PaperOrientation
#define OTYPECOLLECTION ::cppu::OTypeCollection
#define OIMPLEMENTATIONID ::cppu::OImplementationId
#define MUTEXGUARD ::osl::MutexGuard
//________________________________________________________________________________________________________
// namespaces
//________________________________________________________________________________________________________
//using namespace ::osl ;
//using namespace ::rtl ;
//using namespace ::cppu ;
//using namespace ::com::sun::star::uno ;
//using namespace ::com::sun::star::container ;
//using namespace ::com::sun::star::frame ;
//using namespace ::com::sun::star::document ;
//using namespace ::com::sun::star::lang ;
//using namespace ::com::sun::star::util ;
//using namespace ::com::sun::star::view ;
//using namespace ::com::sun::star::beans ;
//________________________________________________________________________________________________________
// impl. declarations
//________________________________________________________________________________________________________
struct IMPL_SfxBaseModel_DataContainer
{
SfxObjectShell* m_pObjectShell ;
OUSTRING m_sURL ;
sal_uInt16 m_nControllerLockCount ;
OMULTITYPEINTERFACECONTAINERHELPER m_aInterfaceContainer ;
REFERENCE< XINTERFACE > m_xParent ;
REFERENCE< XCONTROLLER > m_xCurrent ;
REFERENCE< XDOCUMENTINFO > m_xDocumentInfo ;
REFERENCE< XSTARBASICACCESS > m_xStarBasicAccess ;
SEQUENCE< PROPERTYVALUE> m_seqArguments ;
SEQUENCE< REFERENCE< XCONTROLLER > > m_seqControllers ;
IMPL_SfxBaseModel_DataContainer::IMPL_SfxBaseModel_DataContainer( MUTEX& aMutex ,
SfxObjectShell* pObjectShell )
: m_pObjectShell ( pObjectShell )
, m_sURL ( String() )
, m_nControllerLockCount ( 0 )
, m_aInterfaceContainer ( aMutex )
{
}
} ;
/* ASDBG
//________________________________________________________________________________________________________
// methods for bridging smart<->uno3
// Please don't use! Will be deleted in ... days :-)
//________________________________________________________________________________________________________
REFERENCE< XMODEL > impl_Smart2Uno3_XModel( XModel* pSmart )
{
MAPPING aConverter( "smart" , CPPU_CURRENT_LANGUAGE_BINDING_NAME ) ;
XMODEL* pUno3 = SAL_STATIC_CAST(XMODEL*,(aConverter.mapInterface( pSmart, ::getCppuType((const REFERENCE< XMODEL >*)0) ))) ;
REFERENCE< XMODEL > xUno3 = pUno3 ;
xUno3->release() ;
return xUno3 ;
}
REFERENCE< XCONTROLLER > impl_Smart2Uno3_XController( XController* pSmart )
{
MAPPING aConverter( "smart" , CPPU_CURRENT_LANGUAGE_BINDING_NAME ) ;
XCONTROLLER* pUno3 = SAL_STATIC_CAST(XCONTROLLER*,(aConverter.mapInterface( pSmart, ::getCppuType((const REFERENCE< XCONTROLLER >*)0) ))) ;
REFERENCE< XCONTROLLER > xUno3 = pUno3 ;
xUno3->release() ;
return xUno3 ;
}
REFERENCE< XDOCUMENTINFO > impl_Smart2Uno3_XDocumentInfo( XDocumentInfo* pSmart )
{
MAPPING aConverter( "smart" , CPPU_CURRENT_LANGUAGE_BINDING_NAME ) ;
XDOCUMENTINFO* pUno3 = SAL_STATIC_CAST(XDOCUMENTINFO*,(aConverter.mapInterface( pSmart, ::getCppuType((const REFERENCE< XDOCUMENTINFO >*)0) ))) ;
REFERENCE< XDOCUMENTINFO > xUno3 = pUno3 ;
xUno3->release() ;
return xUno3 ;
}
SEQUENCE< PROPERTYVALUE > impl_Smart2Uno3_seqPropertyValue( const Sequence< PropertyValue >& seqSmart )
{
sal_Int32 nCount = seqSmart.getLen() ;
const PropertyValue* pSmartProperty = seqSmart.getConstArray() ;
sal_Int32 nPosition = 0 ;
SEQUENCE< PROPERTYVALUE > seqUno3 ( nCount ) ;
PROPERTYVALUE* pUno3Property = seqUno3.getArray() ;
for ( nPosition=0; nPosition<nCount; nPosition++ )
{
pUno3Property[nPosition].Name = pSmartProperty[nPosition].Name ;
pUno3Property[nPosition].Handle = pSmartProperty[nPosition].Handle ;
switch ( pSmartProperty[nPosition].State )
{
case PropertyState_DIRECT_VALUE : pUno3Property[nPosition].State = ::com::sun::star::beans::PropertyState_DIRECT_VALUE ;
break;
case PropertyState_DEFAULT_VALUE : pUno3Property[nPosition].State = ::com::sun::star::beans::PropertyState_DEFAULT_VALUE ;
break;
case PropertyState_AMBIGUOUS_VALUE : pUno3Property[nPosition].State = ::com::sun::star::beans::PropertyState_AMBIGUOUS_VALUE ;
break;
default: DBG_ASSERT ( sal_False, "SfxBaseModel::impl_Smart2Uno3_sePropertyValue()\nPropertyState unknown!\n" ) ;
}
::usr::convertUsr2UnoAny( pUno3Property[nPosition].Value, pSmartProperty[nPosition].Value ) ;
}
return seqUno3 ;
}
*/
SIZE impl_Size_Object2Struct( const Size& aSize )
{
SIZE aReturnValue;
aReturnValue.Width = aSize.Width() ;
aReturnValue.Height = aSize.Height() ;
return aReturnValue ;
}
Size impl_Size_Struct2Object( const SIZE& aSize )
{
Size aReturnValue;
aReturnValue.Width() = aSize.Width ;
aReturnValue.Height() = aSize.Height ;
return aReturnValue ;
}
//________________________________________________________________________________________________________
// constructor
//________________________________________________________________________________________________________
SfxBaseModel::SfxBaseModel( SfxObjectShell *pObjectShell ) : IMPL_SfxBaseModel_MutexContainer ( )
, m_pData ( new IMPL_SfxBaseModel_DataContainer( m_aMutex, pObjectShell ) )
{
if ( pObjectShell != NULL )
{
StartListening( *pObjectShell ) ;
}
}
//________________________________________________________________________________________________________
// destructor
//________________________________________________________________________________________________________
SfxBaseModel::~SfxBaseModel()
{
delete m_pData ;
}
//________________________________________________________________________________________________________
// XInterface
//________________________________________________________________________________________________________
ANY SAL_CALL SfxBaseModel::queryInterface( const UNOTYPE& rType ) throw( RUNTIMEEXCEPTION )
{
// Attention:
// Don't use mutex or guard in this method!!! Is a method of XInterface.
// Ask for my own supported interfaces ...
ANY aReturn( ::cppu::queryInterface( rType ,
static_cast< XTYPEPROVIDER* > ( this ) ,
static_cast< XCHILD* > ( this ) ,
static_cast< XDOCUMENTINFOSUPPLIER* > ( this ) ,
static_cast< XEVENTLISTENER* > ( this ) ,
static_cast< XMODEL* > ( this ) ,
static_cast< XMODIFIABLE* > ( this ) ,
static_cast< XMODIFYBROADCASTER* > ( this ) ,
static_cast< XCOMPONENT* > ( this ) ,
static_cast< XPRINTABLE* > ( this ) ,
static_cast< XSTARBASICACCESS* > ( this ) ,
static_cast< XSTORABLE* > ( this ) ) ) ;
// If searched interface supported by this class ...
if ( aReturn.hasValue() == sal_True )
{
// ... return this information.
return aReturn ;
}
else
{
// Else; ... ask baseclass for interfaces!
return OWeakObject::queryInterface( rType ) ;
}
}
//________________________________________________________________________________________________________
// XInterface
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::acquire() throw( RUNTIMEEXCEPTION )
{
// Attention:
// Don't use mutex or guard in this method!!! Is a method of XInterface.
// Forward to baseclass
OWeakObject::acquire() ;
}
//________________________________________________________________________________________________________
// XInterface
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::release() throw( RUNTIMEEXCEPTION )
{
// Attention:
// Don't use mutex or guard in this method!!! Is a method of XInterface.
// Forward to baseclass
OWeakObject::release() ;
}
//________________________________________________________________________________________________________
// XTypeProvider
//________________________________________________________________________________________________________
SEQUENCE< UNOTYPE > SAL_CALL SfxBaseModel::getTypes() throw( RUNTIMEEXCEPTION )
{
// Optimize this method !
// We initialize a static variable only one time. And we don't must use a mutex at every call!
// For the first call; pTypeCollection is NULL - for the second call pTypeCollection is different from NULL!
static OTYPECOLLECTION* pTypeCollection = NULL ;
if ( pTypeCollection == NULL )
{
// Ready for multithreading; get global mutex for first call of this method only! see before
MUTEXGUARD aGuard( MUTEX::getGlobalMutex() ) ;
// Control these pointer again ... it can be, that another instance will be faster then these!
if ( pTypeCollection == NULL )
{
// Create a static typecollection ...
static OTYPECOLLECTION aTypeCollection( ::getCppuType(( const REFERENCE< XTYPEPROVIDER >*)NULL ) ,
::getCppuType(( const REFERENCE< XCHILD >*)NULL ) ,
::getCppuType(( const REFERENCE< XDOCUMENTINFOSUPPLIER >*)NULL ) ,
::getCppuType(( const REFERENCE< XEVENTLISTENER >*)NULL ) ,
::getCppuType(( const REFERENCE< XMODEL >*)NULL ) ,
::getCppuType(( const REFERENCE< XMODIFIABLE >*)NULL ) ,
::getCppuType(( const REFERENCE< XPRINTABLE >*)NULL ) ,
::getCppuType(( const REFERENCE< XSTORABLE >*)NULL ) ,
::getCppuType(( const REFERENCE< XSTARBASICACCESS >*)NULL ) ) ;
// ... and set his address to static pointer!
pTypeCollection = &aTypeCollection ;
}
}
return pTypeCollection->getTypes() ;
}
//________________________________________________________________________________________________________
// XTypeProvider
//________________________________________________________________________________________________________
SEQUENCE< sal_Int8 > SAL_CALL SfxBaseModel::getImplementationId() throw( RUNTIMEEXCEPTION )
{
// Create one Id for all instances of this class.
// Use ethernet address to do this! (sal_True)
// Optimize this method
// We initialize a static variable only one time. And we don't must use a mutex at every call!
// For the first call; pID is NULL - for the second call pID is different from NULL!
static OIMPLEMENTATIONID* pID = NULL ;
if ( pID == NULL )
{
// Ready for multithreading; get global mutex for first call of this method only! see before
MUTEXGUARD aGuard( MUTEX::getGlobalMutex() ) ;
// Control these pointer again ... it can be, that another instance will be faster then these!
if ( pID == NULL )
{
// Create a new static ID ...
static OIMPLEMENTATIONID aID( sal_False ) ;
// ... and set his address to static pointer!
pID = &aID ;
}
}
return pID->getImplementationId() ;
}
//________________________________________________________________________________________________________
// XStarBasicAccess
//________________________________________________________________________________________________________
REFERENCE< XSTARBASICACCESS > implGetStarBasicAccess( SfxObjectShell* pObjectShell )
{
REFERENCE< XSTARBASICACCESS > xRet;
if( pObjectShell )
{
BasicManager* pMgr = pObjectShell->GetBasicManager();
xRet = getStarBasicAccess( pMgr );
}
return xRet;
}
REFERENCE< XNAMECONTAINER > SAL_CALL SfxBaseModel::getLibraryContainer() throw( RUNTIMEEXCEPTION )
{
REFERENCE< XSTARBASICACCESS >& rxAccess = m_pData->m_xStarBasicAccess;
if( !rxAccess.is() )
rxAccess = implGetStarBasicAccess( m_pData->m_pObjectShell );
REFERENCE< XNAMECONTAINER > xRet;
if( rxAccess.is() )
xRet = rxAccess->getLibraryContainer();
return xRet;
}
/**___________________________________________________________________________________________________
@seealso XStarBasicAccess
*/
void SAL_CALL SfxBaseModel::createLibrary( const OUSTRING& LibName, const OUSTRING& Password,
const OUSTRING& ExternalSourceURL, const OUSTRING& LinkTargetURL )
throw(ELEMENTEXISTEXCEPTION, RUNTIMEEXCEPTION)
{
REFERENCE< XSTARBASICACCESS >& rxAccess = m_pData->m_xStarBasicAccess;
if( !rxAccess.is() )
rxAccess = implGetStarBasicAccess( m_pData->m_pObjectShell );
if( rxAccess.is() )
rxAccess->createLibrary( LibName, Password, ExternalSourceURL, LinkTargetURL );
}
/**___________________________________________________________________________________________________
@seealso XStarBasicAccess
*/
void SAL_CALL SfxBaseModel::addModule( const OUSTRING& LibraryName, const OUSTRING& ModuleName,
const OUSTRING& Language, const OUSTRING& Source )
throw( NOSUCHELEMENTEXCEPTION, RUNTIMEEXCEPTION)
{
REFERENCE< XSTARBASICACCESS >& rxAccess = m_pData->m_xStarBasicAccess;
if( !rxAccess.is() )
rxAccess = implGetStarBasicAccess( m_pData->m_pObjectShell );
if( rxAccess.is() )
rxAccess->addModule( LibraryName, ModuleName, Language, Source );
}
/**___________________________________________________________________________________________________
@seealso XStarBasicAccess
*/
void SAL_CALL SfxBaseModel::addDialog( const OUSTRING& LibraryName, const OUSTRING& DialogName,
const ::com::sun::star::uno::Sequence< sal_Int8 >& Data )
throw(NOSUCHELEMENTEXCEPTION, RUNTIMEEXCEPTION)
{
REFERENCE< XSTARBASICACCESS >& rxAccess = m_pData->m_xStarBasicAccess;
if( !rxAccess.is() )
rxAccess = implGetStarBasicAccess( m_pData->m_pObjectShell );
if( rxAccess.is() )
rxAccess->addDialog( LibraryName, DialogName, Data );
}
//________________________________________________________________________________________________________
// XChild
//________________________________________________________________________________________________________
REFERENCE< XINTERFACE > SAL_CALL SfxBaseModel::getParent() throw( RUNTIMEEXCEPTION )
{
/* #77222#
AS->MBA: There is one view only at the moment. We don't must search for other parents in other frames ...!?
if ( !m_pData->m_xParent.is() && m_pData->m_xCurrent.is() )
{
// If no parent is set get the parent by view hierarchy
REFERENCE< XFRAME > xParentFrame( m_pData->m_xCurrent->getFrame()->getCreator(), UNO_QUERY );
if ( xParentFrame.is() )
{
REFERENCE< XCONTROLLER > xCtrl( xParentFrame->getController() );
if ( xCtrl.is() )
return xCtrl->getModel();
}
}
*/
return m_pData->m_xParent;
}
//________________________________________________________________________________________________________
// XChild
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::setParent(const REFERENCE< XINTERFACE >& Parent) throw(NOSUPPORTEXCEPTION, RUNTIMEEXCEPTION)
{
if ( Parent.is() && getParent().is() )
// only set parent when no parent is available
throw NOSUPPORTEXCEPTION();
m_pData->m_xParent = Parent;
}
//________________________________________________________________________________________________________
// XChild
//________________________________________________________________________________________________________
long SfxObjectShellClose_Impl( void* pObj, void* pArg );
void SAL_CALL SfxBaseModel::dispose()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
EVENTOBJECT aEvent( (XMODEL *)this );
m_pData->m_aInterfaceContainer.disposeAndClear( aEvent );
// is an object shell assigned?
if ( m_pData->m_pObjectShell )
{
// Rekursion vermeiden
SfxObjectShell *pShell;
::vos::OGuard aGuard( Application::GetSolarMutex() );
{
::osl::MutexGuard aGuard( m_aMutex );
pShell = m_pData->m_pObjectShell;
EndListening( *pShell );
m_pData->m_pObjectShell = NULL;
}
// Bei dispose keine Speichern-R"uckfrage
if ( pShell->IsEnableSetModified() && !pShell->Get_Impl()->bClosing )
pShell->SetModified( sal_False );
SfxObjectShellClose_Impl( 0, (void*) pShell );
}
::osl::MutexGuard aGuard( m_aMutex );
m_pData->m_xCurrent = REFERENCE< XCONTROLLER > ();
//ASDBG for ( sal_uInt32 n = m_pData->m_seqControllers.getLength(); n; --n )
//ASDBG SEQUENCERemoveElementAt( m_pData->m_seqControllers, n-1 );
m_pData->m_seqControllers = SEQUENCE< REFERENCE< XCONTROLLER > > () ;
}
//________________________________________________________________________________________________________
// XChild
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::addEventListener( const REFERENCE< XEVENTLISTENER >& aListener )
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
m_pData->m_aInterfaceContainer.addInterface( ::getCppuType((const REFERENCE< XEVENTLISTENER >*)0), aListener );
}
//________________________________________________________________________________________________________
// XChild
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::removeEventListener( const REFERENCE< XEVENTLISTENER >& aListener )
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
m_pData->m_aInterfaceContainer.removeInterface( ::getCppuType((const REFERENCE< XEVENTLISTENER >*)0), aListener );
}
//________________________________________________________________________________________________________
// XDOCUMENTINFOSupplier
//________________________________________________________________________________________________________
REFERENCE< XDOCUMENTINFO > SAL_CALL SfxBaseModel::getDocumentInfo()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
::osl::MutexGuard aGuard( m_aMutex );
if ( !m_pData->m_xDocumentInfo.is() && m_pData->m_pObjectShell )
{
::vos::OGuard aGuard( Application::GetSolarMutex() );
((SfxBaseModel*)this)->m_pData->m_xDocumentInfo = new SfxDocumentInfoObject( m_pData->m_pObjectShell ) ;
}
return m_pData->m_xDocumentInfo;
}
//________________________________________________________________________________________________________
// XEVENTLISTENER
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::disposing( const EVENTOBJECT& aObject )
{
REFERENCE< XMODIFYLISTENER > xMod( aObject.Source, UNO_QUERY );
REFERENCE< XEVENTLISTENER > xListener( aObject.Source, UNO_QUERY );
if ( xMod.is() )
m_pData->m_aInterfaceContainer.removeInterface( ::getCppuType((const REFERENCE< XMODIFYLISTENER >*)0), xMod );
else if ( xListener.is() )
m_pData->m_aInterfaceContainer.removeInterface( ::getCppuType((const REFERENCE< XEVENTLISTENER >*)0), xListener );
::osl::MutexGuard aGuard( m_aMutex );
sal_uInt32 nCount = m_pData->m_seqControllers.getLength();
for ( sal_uInt32 n = 0; n < nCount; n++ )
{
if( m_pData->m_seqControllers.getConstArray()[n] == aObject.Source )
{
m_pData->m_seqControllers.getArray()[n] = REFERENCE< XCONTROLLER > () ;
break;
}
//ASDBG if( m_pData->m_seqControllers.getConstArray()[n] == aObject.Source )
//ASDBG {
//ASDBG SequenceRemoveElementAt( m_pData->m_seqControllers, n );
//ASDBG break;
//ASDBG }
}
if ( m_pData->m_xCurrent.is() && m_pData->m_xCurrent == aObject.Source )
m_pData->m_xCurrent = REFERENCE< XCONTROLLER > ();
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
sal_Bool SAL_CALL SfxBaseModel::attachResource( const OUSTRING& rURL ,
const SEQUENCE< PROPERTYVALUE >& rArgs )
{
::osl::MutexGuard aGuard( m_aMutex );
m_pData->m_sURL = rURL ;
m_pData->m_seqArguments = rArgs ;
return sal_True ;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
OUSTRING SAL_CALL SfxBaseModel::getURL()
{
::osl::MutexGuard aGuard( m_aMutex );
return m_pData->m_sURL ;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
SEQUENCE< PROPERTYVALUE > SAL_CALL SfxBaseModel::getArgs()
{
::osl::MutexGuard aGuard( m_aMutex );
return m_pData->m_seqArguments ;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::connectController( const REFERENCE< XCONTROLLER >& xController )
{
::osl::MutexGuard aGuard( m_aMutex );
sal_uInt32 nOldCount = m_pData->m_seqControllers.getLength();
SEQUENCE< REFERENCE< XCONTROLLER > > aNewSeq( nOldCount + 1 );
for ( sal_uInt32 n = 0; n < nOldCount; n++ )
aNewSeq.getArray()[n] = m_pData->m_seqControllers.getConstArray()[n];
aNewSeq.getArray()[nOldCount] = xController;
m_pData->m_seqControllers = aNewSeq;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::disconnectController( const REFERENCE< XCONTROLLER >& xController )
{
::osl::MutexGuard aGuard( m_aMutex );
sal_uInt32 nOldCount = m_pData->m_seqControllers.getLength();
SEQUENCE< REFERENCE< XCONTROLLER > > aNewSeq( nOldCount - 1 );
for ( sal_uInt32 nOld = 0, nNew = 0; nOld < nOldCount; ++nOld )
if ( xController != m_pData->m_seqControllers.getConstArray()[nOld] )
{
aNewSeq.getArray()[nNew] = m_pData->m_seqControllers.getConstArray()[nOld];
++nNew;
}
m_pData->m_seqControllers = aNewSeq;
if ( xController == m_pData->m_xCurrent )
m_pData->m_xCurrent = REFERENCE< XCONTROLLER > ();
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::lockControllers()
{
++m_pData->m_nControllerLockCount ;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::unlockControllers()
{
--m_pData->m_nControllerLockCount ;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
sal_Bool SAL_CALL SfxBaseModel::hasControllersLocked()
{
return ( m_pData->m_nControllerLockCount != 0 ) ;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
REFERENCE< XCONTROLLER > SAL_CALL SfxBaseModel::getCurrentController()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
// get the last active controller of this model
::osl::MutexGuard aGuard( m_aMutex );
if ( m_pData->m_xCurrent.is() )
return m_pData->m_xCurrent;
// get the first controller of this model
return m_pData->m_seqControllers.getLength() ? m_pData->m_seqControllers.getConstArray()[0] : m_pData->m_xCurrent;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::setCurrentController( const REFERENCE< XCONTROLLER >& xCurrentController )
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
::osl::MutexGuard aGuard( m_aMutex );
m_pData->m_xCurrent = xCurrentController;
}
//________________________________________________________________________________________________________
// XMODEL
//________________________________________________________________________________________________________
REFERENCE< XINTERFACE > SAL_CALL SfxBaseModel::getCurrentSelection()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
REFERENCE< XINTERFACE > xReturn;
REFERENCE< XCONTROLLER > xController = getCurrentController() ;
if ( xController.is() )
{
REFERENCE< XSELECTIONSUPPLIER > xDocView( xController, UNO_QUERY );
if ( xDocView.is() )
{
ANY xSel = xDocView->getSelection();
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// return xSel.getReflection() == XINTERFACE_getReflection()
// return xSel.getValueType() == ::getCppuType((const XINTERFACE*)0)
// ? *(REFERENCE< XINTERFACE > *) xSel.get() : REFERENCE< XINTERFACE > ();
xSel >>= xReturn ;
}
}
return xReturn ;
}
//________________________________________________________________________________________________________
// XModifiable
//________________________________________________________________________________________________________
sal_Bool SAL_CALL SfxBaseModel::isModified()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
::osl::MutexGuard aGuard( m_aMutex );
return m_pData->m_pObjectShell ? m_pData->m_pObjectShell->IsModified() : sal_False;
}
//________________________________________________________________________________________________________
// XModifiable
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::setModified( sal_Bool bModified )
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
if ( m_pData->m_pObjectShell )
{
::vos::OGuard aGuard( Application::GetSolarMutex() );
m_pData->m_pObjectShell->SetModified(bModified);
}
}
//________________________________________________________________________________________________________
// XModifiable
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::addModifyListener(const REFERENCE< XMODIFYLISTENER >& xListener) throw(RUNTIMEEXCEPTION )
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
m_pData->m_aInterfaceContainer.addInterface( ::getCppuType((const REFERENCE< XMODIFYLISTENER >*)0),xListener );
}
//________________________________________________________________________________________________________
// XModifiable
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::removeModifyListener(const REFERENCE< XMODIFYLISTENER >& xListener) throw(RUNTIMEEXCEPTION )
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
m_pData->m_aInterfaceContainer.removeInterface( ::getCppuType((const REFERENCE< XMODIFYLISTENER >*)0), xListener );
}
//________________________________________________________________________________________________________
// XPrintable
//________________________________________________________________________________________________________
SEQUENCE< PROPERTYVALUE > SAL_CALL SfxBaseModel::getPrinter()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
// Printer beschaffen
::vos::OGuard aGuard( Application::GetSolarMutex() );
SfxViewFrame *pViewFrm = m_pData->m_pObjectShell ? SfxViewFrame::GetFirst( m_pData->m_pObjectShell, 0, sal_False ) : 0;
if ( !pViewFrm )
return SEQUENCE< PROPERTYVALUE >();
const SfxPrinter *pPrinter = pViewFrm->GetViewShell()->GetPrinter(sal_True);
if ( !pPrinter )
return SEQUENCE< PROPERTYVALUE >();
// Printer Eigenschaften uebertragen
SEQUENCE< PROPERTYVALUE > aPrinter(8);
aPrinter.getArray()[7].Name = DEFINE_CONST_UNICODE( "CanSetPaperSize" );
//ASDBG aPrinter.getArray()[7].Value.setBOOL( pPrinter->HasSupport( SUPPORT_SET_PAPERSIZE ) );
aPrinter.getArray()[7].Value <<= ( pPrinter->HasSupport( SUPPORT_SET_PAPERSIZE ) );
aPrinter.getArray()[6].Name = DEFINE_CONST_UNICODE( "CanSetPaperFormat" );
//ASDBG aPrinter.getArray()[6].Value.setBOOL( pPrinter->HasSupport( SUPPORT_SET_PAPER ) );
aPrinter.getArray()[6].Value <<= ( pPrinter->HasSupport( SUPPORT_SET_PAPER ) );
aPrinter.getArray()[5].Name = DEFINE_CONST_UNICODE( "CanSetPaperOrientation" );
//ASDBG aPrinter.getArray()[5].Value.setBOOL( pPrinter->HasSupport( SUPPORT_SET_ORIENTATION ) );
aPrinter.getArray()[5].Value <<= ( pPrinter->HasSupport( SUPPORT_SET_ORIENTATION ) );
aPrinter.getArray()[4].Name = DEFINE_CONST_UNICODE( "IsBusy" );
//ASDBG aPrinter.getArray()[4].Value.setBOOL( pPrinter->IsJobActive() );
aPrinter.getArray()[4].Value <<= ( pPrinter->IsJobActive() );
aPrinter.getArray()[3].Name = DEFINE_CONST_UNICODE( "PaperSize" );
SIZE aSize = impl_Size_Object2Struct(pPrinter->GetPaperSize() );
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// aPrinter.getArray()[3].Value.set( &aSize, Size_getReflection() );
aPrinter.getArray()[3].Value <<= aSize;
aPrinter.getArray()[2].Name = DEFINE_CONST_UNICODE( "PaperFormat" );
PAPERFORMAT eFormat = (PAPERFORMAT)pPrinter->GetPaper();
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// aPrinter.getArray()[2].Value.set( &eFormat, PaperFormat_getReflection() );
aPrinter.getArray()[2].Value <<= eFormat;
aPrinter.getArray()[1].Name = DEFINE_CONST_UNICODE( "PaperOrientation" );
PAPERORIENTATION eOrient = (PAPERORIENTATION)pPrinter->GetOrientation();
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// aPrinter.getArray()[1].Value.set( &eOrient, PaperOrientation_getReflection() );
aPrinter.getArray()[1].Value <<= eOrient;
aPrinter.getArray()[0].Name = DEFINE_CONST_UNICODE( "Name" );
// aPrinter.getArray()[0].Value <<= ( S2U(pPrinter->GetName()) );
String sStringTemp = pPrinter->GetName() ;
aPrinter.getArray()[0].Value <<= ::rtl::OUString( sStringTemp );
return aPrinter;
}
//________________________________________________________________________________________________________
// XPrintable
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::setPrinter(const SEQUENCE< PROPERTYVALUE >& rPrinter)
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
// alten Printer beschaffen
::vos::OGuard aGuard( Application::GetSolarMutex() );
SfxViewFrame *pViewFrm = m_pData->m_pObjectShell ? SfxViewFrame::GetFirst( m_pData->m_pObjectShell, 0, sal_False ) : 0;
if ( !pViewFrm )
return;
SfxViewShell *pViewSh = pViewFrm->GetViewShell();
SfxPrinter *pPrinter = pViewSh->GetPrinter(sal_True);
if ( !pPrinter )
return;
// new Printer-Name available?
sal_uInt16 nChangeFlags = 0;
for ( int n = 0; n < rPrinter.getLength(); ++n )
{
// get Property-Value from printer description
const PROPERTYVALUE &rProp = rPrinter.getConstArray()[n];
// Name-Property?
if ( rProp.Name.compareToAscii( "Name" ) == 0 )
{
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// if ( rProp.Value.getReflection() != OOUSTRING_getReflection() )
if ( rProp.Value.getValueType() != ::getCppuType((const OUSTRING*)0) )
throw ILLEGALARGUMENTEXCEPTION();
// String aPrinterName( U2S( rProp.Value.getString() ) );
OUSTRING sTemp;
rProp.Value >>= sTemp ;
String aPrinterName( sTemp ) ;
pPrinter = new SfxPrinter( pPrinter->GetOptions().Clone(),
aPrinterName );
nChangeFlags = SFX_PRINTER_PRINTER;
break;
}
}
Size aSetPaperSize( 0, 0);
sal_Int32 nPaperFormat = PAPER_USER;
// other properties
for ( int i = 0; i < rPrinter.getLength(); ++i )
{
// get Property-Value from printer description
const PROPERTYVALUE &rProp = rPrinter.getConstArray()[i];
// IMPL_SmartAny aValue( rProp.Value );
// PaperOrientation-Property?
if ( rProp.Name.compareToAscii( "PaperOrientation" ) == 0 )
{
sal_Int32 nOrient;
// if ( !aValue.queryEnum( nOrient ) )
if ( ( rProp.Value >>= nOrient ) == sal_False )
throw ILLEGALARGUMENTEXCEPTION();
pPrinter->SetOrientation( (Orientation) nOrient );
nChangeFlags |= SFX_PRINTER_CHG_ORIENTATION;
}
// PaperFormat-Property?
if ( rProp.Name.compareToAscii( "PaperFormat" ) == 0 )
{
// if ( !aValue.queryEnum( nPaperFormat ) )
if ( ( rProp.Value >>= nPaperFormat ) == sal_False )
throw ILLEGALARGUMENTEXCEPTION();
pPrinter->SetPaper( (Paper) nPaperFormat );
nChangeFlags |= SFX_PRINTER_CHG_SIZE;
}
// PaperSize-Property?
if ( rProp.Name.compareToAscii( "PaperSize" ) == 0 )
{
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// if ( rProp.Value.getReflection() != Size_getReflection() )
// if ( rProp.Value.getValueType() != ::getCppuType((const Size*)0) )
// throw( ILLEGALARGUMENTEXCEPTION() );
//
// aSetPaperSize = ( *(const Size*) rProp.Value.get() );
SIZE aTempSize ;
if ( ( rProp.Value >>= aTempSize ) == sal_False )
{
throw ILLEGALARGUMENTEXCEPTION();
}
else
{
aSetPaperSize = impl_Size_Struct2Object(aTempSize);
}
}
}
//os 12.11.98: die PaperSize darf nur gesetzt werden, wenn tatsaechlich
//PAPER_USER gilt, sonst koennte vom Treiber ein falsches Format gewaehlt werden
if(nPaperFormat == PAPER_USER &&
aSetPaperSize.Width())
{
//JP 23.09.98 - Bug 56929 - MapMode von 100mm in die am
// Device gesetzten umrechnen. Zusaetzlich nur dann
// setzen, wenn sie wirklich veraendert wurden.
aSetPaperSize = pPrinter->LogicToPixel( aSetPaperSize, MAP_100TH_MM );
if( aSetPaperSize != pPrinter->GetPaperSizePixel() )
{
pPrinter->SetPaperSizeUser( pPrinter->PixelToLogic( aSetPaperSize ) );
nChangeFlags |= SFX_PRINTER_CHG_SIZE;
}
}
// set new printer
pViewSh->SetPrinter( pPrinter, nChangeFlags );
}
//________________________________________________________________________________________________________
// XPrintable
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::print(const SEQUENCE< PROPERTYVALUE >& rOptions)
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
// get view for sfx printing capabilities
::vos::OGuard aGuard( Application::GetSolarMutex() );
SfxViewFrame *pViewFrm = m_pData->m_pObjectShell ? SfxViewFrame::GetFirst( m_pData->m_pObjectShell, 0, sal_False ) : 0;
if ( !pViewFrm )
return;
SfxViewShell* pView = pViewFrm->GetViewShell();
if ( !pView )
return;
SfxAllItemSet aArgs( pView->GetPool() );
sal_Bool bMonitor = sal_False;
sal_Bool bWaitUntilEnd = sal_False;
for ( int n = 0; n < rOptions.getLength(); ++n )
{
// get Property-Value from options
const PROPERTYVALUE &rProp = rOptions.getConstArray()[n];
// IMPL_SmartAny aValue( rProp.Value );
// FileName-Property?
if ( rProp.Name.compareToAscii( "FileName" ) == 0 )
{
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// if ( rProp.Value.getReflection() == OOUSTRING_getReflection() )
if ( rProp.Value.getValueType() == ::getCppuType((const OUSTRING*)0) )
{
// aArgs.Put( SfxStringItem( SID_FILE_NAME, U2S( rProp.Value.getString() ) ) );
OUSTRING sTemp;
rProp.Value >>= sTemp;
aArgs.Put( SfxStringItem( SID_FILE_NAME, String( sTemp ) ) );
}
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// else if ( rProp.Value.getReflection() != Void_getReflection() )
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
// CopyCount-Property
else if ( rProp.Name.compareToAscii( "CopyCount" ) == 0 )
{
sal_Int32 nCopies = 0;
// if ( !aValue.queryINT32( nCopies ) )
if ( ( rProp.Value >>= nCopies ) == sal_False )
throw ILLEGALARGUMENTEXCEPTION();
aArgs.Put( SfxInt16Item( SID_PRINT_COPIES, nCopies ) );
}
// Collate-Property
else if ( rProp.Name.compareToAscii( "Collate" ) == 0 )
{
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// if ( rProp.Value.getReflection() == BOOL_getReflection() )
if ( rProp.Value.getValueType() == ::getCppuBooleanType() )
{
sal_Bool bTemp ;
rProp.Value >>= bTemp ;
aArgs.Put( SfxBoolItem( SID_PRINT_COLLATE, bTemp ) );
}
else
throw ILLEGALARGUMENTEXCEPTION();
}
// Sort-Property
else if ( rProp.Name.compareToAscii( "Sort" ) == 0 )
{
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// if ( rProp.Value.getReflection() == BOOL_getReflection() )
if ( rProp.Value.getValueType() == ::getCppuBooleanType() )
{
sal_Bool bTemp ;
rProp.Value >>= bTemp ;
aArgs.Put( SfxBoolItem( SID_PRINT_SORT, bTemp ) );
}
else
throw ILLEGALARGUMENTEXCEPTION();
}
// Pages-Property
else if ( rProp.Name.compareToAscii( "Pages" ) == 0 )
{
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// if ( rProp.Value.getReflection() == OOUSTRING_getReflection() )
if ( rProp.Value.getValueType() == ::getCppuType((const OUSTRING*)0) )
{
OUSTRING sTemp;
rProp.Value >>= sTemp;
aArgs.Put( SfxStringItem( SID_PRINT_PAGES, String( sTemp ) ) );
}
else
throw ILLEGALARGUMENTEXCEPTION();
}
// MonitorVisible
else if ( rProp.Name.compareToAscii( "MonitorVisible" ) == 0 )
{
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// if ( rProp.Value.getReflection() == BOOL_getReflection() )
if ( rProp.Value.getValueType() == ::getCppuBooleanType() )
rProp.Value >>= bMonitor ;
else
throw ILLEGALARGUMENTEXCEPTION();
}
// MonitorVisible
else if ( rProp.Name.compareToAscii( "Wait" ) == 0 )
{
// automatisch auskommentiert - Wird von UNO III nicht weiter unterst<73>tzt!
// if ( rProp.Value.getReflection() == BOOL_getReflection() )
if ( rProp.Value.getValueType() == ::getCppuBooleanType() )
rProp.Value >>= bWaitUntilEnd ;
else
throw ILLEGALARGUMENTEXCEPTION();
}
}
aArgs.Put( SfxBoolItem( SID_SILENT, !bMonitor ) );
if ( bWaitUntilEnd )
aArgs.Put( SfxBoolItem( SID_ASYNCHRON, sal_False ) );
SfxRequest aReq( SID_PRINTDOC, SFX_CALLMODE_SYNCHRON | SFX_CALLMODE_API, pView->GetPool() );
aReq.SetArgs( aArgs );
pView->ExecuteSlot( aReq );
}
//________________________________________________________________________________________________________
// XStorable
//________________________________________________________________________________________________________
sal_Bool SAL_CALL SfxBaseModel::hasLocation()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
return m_pData->m_pObjectShell ? m_pData->m_pObjectShell->HasName() : sal_False;
}
//________________________________________________________________________________________________________
// XStorable
//________________________________________________________________________________________________________
OUSTRING SAL_CALL SfxBaseModel::getLocation()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
return m_pData->m_pObjectShell ? OUSTRING(m_pData->m_pObjectShell->GetMedium()->GetName()) : m_pData->m_sURL;
}
//________________________________________________________________________________________________________
// XStorable
//________________________________________________________________________________________________________
sal_Bool SAL_CALL SfxBaseModel::isReadonly()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
return m_pData->m_pObjectShell ? m_pData->m_pObjectShell->IsReadOnly() : sal_True;
}
//________________________________________________________________________________________________________
// XStorable
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::store()
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
if ( m_pData->m_pObjectShell )
{
::vos::OGuard aGuard( Application::GetSolarMutex() );
m_pData->m_pObjectShell->Save_Impl();
}
}
//________________________________________________________________________________________________________
// XStorable
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::storeAsURL( const OUSTRING& rURL ,
const SEQUENCE< PROPERTYVALUE >& rArgs )
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
if ( m_pData->m_pObjectShell )
{
::vos::OGuard aGuard( Application::GetSolarMutex() );
impl_store( m_pData->m_pObjectShell, rURL, rArgs, sal_False );
SEQUENCE< PROPERTYVALUE > aSequence ;
TransformItems( SID_OPENDOC, *m_pData->m_pObjectShell->GetMedium()->GetItemSet(), aSequence );
attachResource( rURL, aSequence );
}
}
//________________________________________________________________________________________________________
// XStorable
//________________________________________________________________________________________________________
void SAL_CALL SfxBaseModel::storeToURL( const OUSTRING& rURL ,
const SEQUENCE< PROPERTYVALUE >& rArgs )
{
// object already disposed?
if ( impl_isDisposed() )
throw DISPOSEDEXCEPTION();
if ( m_pData->m_pObjectShell )
{
::vos::OGuard aGuard( Application::GetSolarMutex() );
impl_store( m_pData->m_pObjectShell, rURL, rArgs, sal_True );
}
}
//________________________________________________________________________________________________________
// SfxListener
//________________________________________________________________________________________________________
void SfxBaseModel::Notify( SfxBroadcaster& rBC ,
const SfxHint& rHint )
{
if ( &rBC == m_pData->m_pObjectShell )
{
SfxSimpleHint* pHint = PTR_CAST( SfxSimpleHint, &rHint );
if ( pHint && pHint->GetId() == SFX_HINT_DOCCHANGED )
changing();
}
}
//________________________________________________________________________________________________________
// public impl.
//________________________________________________________________________________________________________
void SfxBaseModel::changing()
{
// object already disposed?
if ( impl_isDisposed() )
return;
OINTERFACECONTAINERHELPER* pIC = m_pData->m_aInterfaceContainer.getContainer( ::getCppuType((const REFERENCE< XMODIFYLISTENER >*)0) );
if( pIC )
{
EVENTOBJECT aEvent( (XMODEL *)this );
OINTERFACEITERATORHELPER aIt( *pIC );
while( aIt.hasMoreElements() )
((XMODIFYLISTENER *)aIt.next())->modified( aEvent );
}
}
void SfxBaseModel::impl_change()
{
// object already disposed?
if ( impl_isDisposed() )
return;
OINTERFACECONTAINERHELPER* pIC = m_pData->m_aInterfaceContainer.getContainer( ::getCppuType((const REFERENCE< XMODIFYLISTENER >*)0) );
if( pIC )
{
EVENTOBJECT aEvent( (XMODEL *)this );
OINTERFACEITERATORHELPER aIt( *pIC );
while( aIt.hasMoreElements() )
((XMODIFYLISTENER *)aIt.next())->modified( aEvent );
}
}
//________________________________________________________________________________________________________
// public impl.
//________________________________________________________________________________________________________
SfxObjectShell* SfxBaseModel::GetObjectShell() const
{
return m_pData ? m_pData->m_pObjectShell : 0;
}
SfxObjectShell* SfxBaseModel::impl_getObjectShell() const
{
return m_pData ? m_pData->m_pObjectShell : 0;
}
//________________________________________________________________________________________________________
// public impl.
//________________________________________________________________________________________________________
sal_Bool SfxBaseModel::IsDisposed() const
{
return ( m_pData == NULL ) ;
}
sal_Bool SfxBaseModel::impl_isDisposed() const
{
return ( m_pData == NULL ) ;
}
//________________________________________________________________________________________________________
// private impl.
//________________________________________________________________________________________________________
void SfxBaseModel::impl_store( SfxObjectShell* pObjectShell ,
const OUSTRING& sURL ,
const SEQUENCE< PROPERTYVALUE >& seqArguments ,
sal_Bool bSaveTo )
{
SfxRequest aReq( SID_SAVEASDOC, SFX_CALLMODE_SYNCHRON, pObjectShell->GetPool() );
aReq.AppendItem( SfxStringItem( SID_FILE_NAME, String(sURL) ) );
if ( bSaveTo )
aReq.AppendItem( SfxBoolItem( SID_SAVETO, sal_True ) );
// Parameter auswerten
for ( int n = 0; n < seqArguments.getLength(); ++n )
{
// get Property-Value from args
const PROPERTYVALUE &rProp = seqArguments.getConstArray()[n];
// FilterName-Property?
if ( rProp.Name.compareToAscii( "FilterName" ) == 0 )
{
OUSTRING sTemp;
if ( ( rProp.Value >>= sTemp ) == sal_True )
aReq.AppendItem( SfxStringItem( SID_FILTER_NAME, String( sTemp ) ) );
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
// FilterFlags-Property?
else if ( rProp.Name.compareToAscii( "FilterOptions" ) == 0 )
{
OUSTRING sTemp;
if ( ( rProp.Value >>= sTemp ) == sal_True )
aReq.AppendItem( SfxStringItem( SID_FILE_FILTEROPTIONS, String( sTemp ) ) );
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
// Version-Property?
else if ( rProp.Name.compareToAscii( "Version" ) == 0 )
{
OUSTRING sTemp ;
if ( ( rProp.Value >>= sTemp ) == sal_True )
aReq.AppendItem( SfxStringItem( SID_VERSION, String( sTemp ) ) );
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
// Author-Property?
else if ( rProp.Name.compareToAscii( "Author" ) == 0 )
{
OUSTRING sTemp ;
if ( ( rProp.Value >>= sTemp ) == sal_True )
aReq.AppendItem( SfxStringItem( SID_DOCINFO_AUTHOR, String( sTemp ) ) );
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
// Password-Property?
else if ( rProp.Name.compareToAscii( "Password" ) == 0 )
{
OUSTRING sTemp ;
if ( ( rProp.Value >>= sTemp ) == sal_True )
aReq.AppendItem( SfxStringItem( SID_PASSWORD, String( sTemp ) ) );
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
// Overwrite-Property?
else if ( rProp.Name.compareToAscii( "Overwrite" ) == 0 )
{
sal_Bool bTemp ;
if ( ( rProp.Value >>= bTemp ) == sal_True )
aReq.AppendItem( SfxBoolItem( SID_OVERWRITE, bTemp ) );
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
// TemplateRegion-Property?
else if ( rProp.Name.compareToAscii( "TemplateRegion" ) == 0 )
{
aReq.SetSlot( SID_DOCTEMPLATE );
OUSTRING sTemp ;
if ( ( rProp.Value >>= sTemp ) == sal_True )
aReq.AppendItem( SfxStringItem( SID_TEMPLATE_REGIONNAME, String( sTemp ) ) );
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
// Template-Property?
else if ( rProp.Name.compareToAscii( "TemplateName" ) == 0 )
{
aReq.SetSlot( SID_DOCTEMPLATE );
OUSTRING sTemp ;
if ( ( rProp.Value >>= sTemp ) == sal_True )
aReq.AppendItem( SfxStringItem( SID_TEMPLATE_NAME, String( sTemp ) ) );
else if ( rProp.Value.getValueType() != ::getCppuVoidType() )
throw ILLEGALARGUMENTEXCEPTION();
}
else
{
throw ::com::sun::star::beans::UnknownPropertyException(
rProp.Name, *this );
}
}
const SfxBoolItem *pRet = (const SfxBoolItem*) pObjectShell->ExecuteSlot( aReq );
if ( !pRet || !pRet->GetValue() )
throw SfxIOException_Impl( ERRCODE_IO_CANTWRITE );
}
Reference in New Issue View Git Blame Copy Permalink